Doubt about Report:: Count users by domain

Guys,
when I run report: Count users by domain, display my domain XXX and some hostnames users logged in my domain and 15 users logged locally.
Well,some users after 2 weeks already logged in domain but in my report still display info user logged locally.
Why this?
Is there someone I do run manually for not display more this users now log on in domain but display logged locally? I think this only cache,but I don't want my report contains data wrong.
Any idea?
Thanks.

Hi,
If you are talking about the information in report "Users in a specific domain", the information are collected by hardware inventory. SCCM collects inventories on a periodic basis, not real-time. You could initiate Hardware Inventory Cycle from client to
accelerate the speed for updating data.
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Doubt about Report - Task Sequence - Deployments

    Hello,
    I have a doubt about this report Summary report for a task sequence deployment in Task Sequence - Deployments.
    Last Friday I did deployed in 6 desktop ran this report and display my 6 desktop's all right.
    Today a run this report and display no data.
    Why occurred this? Anyone have idea?
    I think this report have display me all data about my task sequence specific.
    Thanks.

    Are you sure the deployment wasn't deleted or recreated? 
    Query your DB and see what the NumberInstalled says.  That should show you 6 were installed.  You just need the Deployment ID added to this query below.
    select *
    from dbo.DeploymentSummary
    where
    OfferID = 'YOUR DEPLOYMENT ID HERE'
    Best, Jacob I'm a PC.
    My TS wasn't modified or recreated, but in DB display NumberInstalled = 0.
    Anyone have modify this TS since last friday, I don't know the reason this happened.
    I will do news deploys and see this report after if still have same issue.
    Thanks your opinion.

  • Doubt about Report Suite Office in SCCM 2012

    Hi all,
    I have a question about Suite Office in SCCM 2012.
    Why in my report 07B - Computers that recently used a specified executable program
    when I specific Office 2010 don't display nothing about Outlook?
    Just display follows softwares: Word,Excel,PowerPoint,Visio and Project. Someone have idea?
    Thanks.

    Do you have Software Metering enabled for that executable?
    Mike Leach | http://blogs.catapultsystems.com/mleach/default.aspx
    Mike Thank's your opinion...my answer....Yes, I do.My software metering is OK.
    My doubt is why Microsoft Outlook don't display as being part suite Office?
    Is necessary I select Microsoft Outlook (separately) for do my software metering but I think this is not correct, because the correct is suite Office contains: Word,Excel,Visio,Project,Powerpoint
    and Outlook...
    So when I selected Microsoft Office 2010 display all softwares as I saw in my first post and any about Outlook.
    Thanks any suggestions.

  • Doubt About Report Software Metering

    Hello Guys,
    I create my rule about metering for SoftwareX and is OK, run with success.
    I have 2 computers(PC01,PC02) where I uninstall SoftwareX but when I run after 72hours Report: Computers that have run a specific metered software program ....still display PC01 and PC02 has SoftwareX metered.
    My doubt is I set Software Metering Properties for 45 days, follow:
    Will it take 45 days for PC1 and PC2 doesn't display more in my Report? Is this right?
    If isn't right, how I can fix this for doesn't display SoftwareX if was uninstall in PC1 and PC2? My hardware inventory run ever 24hs and 24hs.
    Thanks a lot.

    Correct it will take ~45 days for the data to be removed from CM12.
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • Doubt about report FBL5N of screen field:Open items and Cleared items

    hi
    i know the report FBL5N is use DDF LDB and the report work flow is BSID->BKFP->BSEG
    but i don't know to differentiate Open Items and Cleared items in this report.
    Open items and Cleared items stand for a field flag in these table (BSID,BKFP,BSEG )? if true the field is?
    or they must be calc in program ? if true what about calc rules?
    waiting for help! thank you!

    Hi,
    Here is the difference in Open Items and Cleared Items.
    In FI first the document is Open (when it is posted) so the entry is made in table BSID. Once the document is cleared, it will move from BSID to BSAD. And for Cleared item you will see Clearing Document no and Clearing date values updated (these are blank when the item is open).
    The only difference in Open and Cleared is via Clearing Document and Clearing Date. If the values are present, it means document is cleared.
    Hope this helps.
    ashish
    Message was edited by:
            Ashish Gundawar

  • Doubt about getting IPadress of a Domain

    What are the differences between getting IP address in the following two methods. Both the methods return same output. I want to know how the
    InetAddress.getByName( ) guarantee the same thing as DNS look up
    The following are the methods
    1. Use InetAddress.getByName( )
                  Address = InetAddress.getByName("www.google.com");
                  System.out.println(Address);2. Use JNDI method to lookup the DNS server
                      env.put("java.naming.factory.initial", "com.sun.jndi.dns.DnsContextFactory");
                      env.put("java.naming.provider.url", "dns://172.19.25.200");
                     DirContext ctx = new InitialDirContext(env);
                     Attributes attrs = ctx.getAttributes("www.google.com",new String[] {"A"});
                     for (NamingEnumeration ae = attrs.getAll();ae.hasMoreElements();) {
                        Attribute attr = (Attribute)ae.next();
                        String attrId = attr.getID();
                        for (Enumeration vals = attr.getAll();vals.hasMoreElements(); System.out.println(attrId + ": " + vals.nextElement()));
                   ctx.close();Both the above methods are giving same IP for google.com
    Please help me in this regard lil quickly.... Which is reliable among the above two methods

    but do realise that there's no such thing as "the IP address of a domain".
    You will get the ip address of a machine in that domain, to be specific the machine that's called or alliased by the name you passed.
    And in case of clustered servers (as is the case with the DNS name you used in your code) you can get back any of a number of ip addresses as the cluster will simply give you one of the servers in the clusters.

  • Doubt about uses of OBIEE

    I have some doubts about the possible uses of OBIEE. It happens that using OBIEE sometimes users demand report of an "analytical" type, that is aggregated analysis through OBIEE’s Answers, selecting data from dimension tables and measures from fact tables. That’s the ordinary purpose of business intelligence tools!!!
    Some other times though, users demand to perform through Answers analyses of an "operating" type, that is simple extractions of some fields belonging to dimension tables, linked between each other through joins, (hence without querying fact tables): that happens because some of the tables brought in the datawarehouse are not directly linked to any fact table. In this way users want to use Answers to visualize data even for this kind of extractions (or operating reports).
    Is this a correct use of the tool or is it just a “twisted” way of using it, always leading eventually to incorrect extractions? If that’s the case, is it possible to use instead BI Publisher, extracting the dataset through the "Sql Query" mode in a visual manner? The problem of the latter solution, in my case, relies in the fact that users are not enough skilled from the technical point of view: they would prefer to use Answers for every extraction, belonging both to the first type (aggregations) and the second one (extractions), that I just described. Can you suggest a methodology to clarify this situation?

    Hi,
    I understand your point... But I think OBIEE doesn't allow having dimension "on their own", they must be joined to a fact table somehow. This way, when you do a query in answers using fields of two dimension tables a fact table should be always involved. When dimensions are conformed, several fact tables may be used, and OBIEE uses the "best" one in terms of performance. However, there are some tricks that you can do to make sure a particular fact table is used, like using the "implicit fact column" in the presentation layer.
    So back to your point, using OBIEE for "operational" reporting as you call it is a valid option in my experience, but you have to make sure that the underlaying star schema supports the logic that your end users expect when they use just dimension fields.
    Regards,

  • Does IT services sales experience can be counted as a domain experience for SAP SD Fresher?

    Hello All,
    I am new to SCN and i need your help.
    I am currently working as a Sales Executive with an IT consulting firm specialized in SAP & Oracle consulting services.
    I want to enter into SAP world and i thought that SAP SD is best for me because of my education (MBA-Marketing) & current experience.
    When i research on SAP SD i got to know that Domain knowledge is very important for a consultant. I felt happy because I have around 3 Years of Sales experience for Oracle & SAP consulting services.
    After enrolling for SAP SD education one day I heard that experience of services industry is not counted as a domain experience.
    I had already invested huge money for SAP SD education and now i am feeling helpless because of this news.
    Please help me with your experience whether IT services sales experience can be counted as a domain experience for SAP SD Fresher or not?
    Waiting for your response.
    Your Junior,
    Alok

    Alok,
    Don't worry! IT service sales experience can be counted as domain experience for SAP SD career.
    After being in SAP for some years (as an end user, key user, SD consultant), the most important things are clear process thinking, perseverance, honest hard work and communication.
    If you have the above qualities, then you will succeed in SAP!
    SAP SD is the logistics side of sales. In other words, there is a Laptop repair shop. If SAP SD is implemented, it will take care of creating repair order, creating billing document. So it is not about selling but about maintaining those "records" in SD.
    The above example is of service. This too is part of SD.
    So if someone has experience in sale of service that is relevant domain experience.
    Apart from this you have to understand, imagine - sale of products.
    In sale of products, there will be one addition step - delivery of product, from the manufacturer to the customer / consumer.
    Focus you mind on learning.
    Good luck!
    Typewriter

  • Doubt about Role and Policy

    Hi everyone,
    I have a doubt about role and policy,
    I'm using OBIEE11.1.1.5, I try to creating role R1 by creating like BIConsumer.
    then I go to policies interface,Edit 'BIConsumer' policy,
    I find only one role 'BIConsumer' under grantee.
    so I'd like to ask why 'R1' is not under policy 'BIConsumer' while R1 has permission like role BIConsumer ???
    thanks in advance!

    Application policies are sets of java permissions that are associated with a principal which is BIConsumer role in this case which grants permissions necessary to use, or to consume, content created by other users.
    So when you try to create like BIConsumer, you are not modifying the existing BIConsumer principal policy( which you should never do) but instead trying to create one similar grants like it.
    Usually as long as you are not dealing with BI Publisher, Financial Reporting and Real-Time Decisions application security permissions restriction, you would not have to modify any of these policies and use the default ones.
    Hope this helps. Pls mark if it does.
    Thanks,
    SVS

  • Lync 2013 commands shell to get the report which user is connecting to which pool in coexistence with Legacy version

    HI,
    We have LYNC 2013 in coexistence with OCS 2007 R2 and setup is like that user can connect to any pool  either sip is exist on OCS 2007 or on LYNC 2013
    Do we have any command shell to get the details about which user is connecting to which pool?
    lync 2013 commands to get the report which user is connecting to legacy pool in coexistence with ocs 2007
    Thanks
    jitender

    HI Holger,
    Thanks for reply!!
    But the above link will not work as per scenrio.
    The SIP addresses has been migrated to LYNC server. ther is no user host on OCS server. However in communicator client the manual entry is done and OCS pool name is given. OCS pool just redirect the query to LYNC pool.
    And we need to idenfy the SIP user request on OCS which are redirecting by ocs pool to lync pool
    In other word we can say this question like:  How to collect the number of SIP users connections coming on OCS Direct  server?
    Thanks
    jitender
    As all users are migrated to Lync Server, all users will be redirected to their home pool.
    You want to collect the number of SIP connections coming from OCS server that means you want to count the number of Lync client with manual configuration pointing to OCS server.
    This information is stored in SIP session. There is no Lync command to get this kind of information natively.
    Lisa Zheng
    TechNet Community Support

  • SharePoint Designer workflow gives Claims Authentication error for some users. Problem getting output claims identity. The specified user or domain group was not found.

    We have a SharePoint Enterprise 2013 system at RTM level.  We've installed Workflow Manager 1.0 by following the steps at
    http://technet.microsoft.com/en-us/library/jj658588.aspx.  For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
    is invoked successfully.  This is working successfully, but only for a single user.  If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
    Claims Authentication          af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
    followed by:
    Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
    (as details below).
    All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly.  All have Contribute or Design permission level (and for testing,
    Full Control). 
    What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
    Thank you for your response.
    Jim Mac.
    08/29/2013 10:22:51.94  w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
    not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.     at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
    Boolean forceSuccess)     at System.Security.Principal.NTAccount.Translate(Type targetType)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
    SPClaim loginClaim)     --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          af3zp Unexpected ...ity, SPClaim loginClaim)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
    encodedIdentityClaimSuffix)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
    requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94  w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
    System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.     at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)    
    at System.Security.Principal.NTAccount.Translate(Type targetType)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)    
    --- End of inner exception stack trace ---     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable ...nClaim)     at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
    requestInfo, IClaimsIdentity identity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)     at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
    08/29/2013 10:22:51.94* w3wp.exe (0x2020)                        0x26D8 SharePoint Foundation        
     Claims Authentication          fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
    principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583

    Hi Aries,
    I am facing issue with work flow where Workflow goes to Suspend mode.
    I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
    Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
    Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
    This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
    Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
    Following steps are already performed
    1.Make sure User profile synchronization is started.
    2.Make sure the user is not the SharePoint system user.
    3.Make sure the user by whom you are logged is available in User Profile list.
    4.Step full synchronization of User Profile Application.
    From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
    Appreciate any thoughts or solution.
    Following are the log files.
    <-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
    http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
    Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
    RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
    {"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
    configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
    has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
    realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
    RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
    instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
    ULS Log
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE} 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. 
    04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
    issuer. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
    Identity f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user  f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
    'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
    Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
    issuer. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up  site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
    incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
    to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured.  f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
    contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
    outputIdentity, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
    3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator.     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
    upManager, IEnumerable`1 identityClaims)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0()     at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()    
    at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param)     at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
    secureCode)     at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
    contextUri, List`1 claims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims)     at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
    contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
    outputIdentity, SPCallingIdentityType callerType)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)    
    at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
    principal, RequestSecurityToken request, Scope scope)     at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request)     at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
    principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
    unable to process the request due to an internal error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
    order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
    response)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
    rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
    error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
    the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }.  Available
    parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error.  For more information
    about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
    per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
    error.  For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
    the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.   at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
    rst, RequestSecurityTokenResponse& rstr)     at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
    Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties)     at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
    SecurityToken onBehalfOf)     at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3()     at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
    secureCode)     at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)    
    at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e)     at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()    
    at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context  site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
    http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
    http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
    04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
    Regards
    Sakti

  • I would like to report a user.

    Hello, as I said in the title I would like to report a user for ddosing my friends and threatening to shut down my friends and my routers. Here is his name and some quotes.
    [4:18:57 AM] ∆яɪsᴛ: Don't say those words little boy.
    [4:19:01 AM] ∆яɪsᴛ: Something bad might happen.
    [4:19:24 AM] Brian wyatt: why do it to them ones not even in the same country
    [4:19:38 AM] ∆яɪsᴛ: Why should that matter.
    [4:19:45 AM] Brian wyatt: he doesnt even know you
    [4:19:48 AM] ∆яɪsᴛ: What does country have to affect?
    [4:20:04 AM] ∆яɪsᴛ: How about this
    [4:20:15 AM] ∆яɪsᴛ: Give me your Minecraft account.
    [4:20:27 AM] Brian wyatt: no
    [4:20:39 AM] ∆яɪsᴛ: 97.121.170.250
    [4:20:45 AM] ∆яɪsᴛ: 58.96.36.4
    [4:20:48 AM] ∆яɪsᴛ: 70.59.210.199
    [4:20:53 AM] ∆яɪsᴛ: All three of your IP's
    [4:20:58 AM] Brian wyatt: do somthing to my router and i will ccall the police
    [4:20:59 AM] ∆яɪsᴛ: I'm only hitting you guys with 8gb/s
    [4:21:05 AM] ∆яɪsᴛ: Go ahead.
    [4:23:30 AM] ∆яɪsᴛ: I will be on tomorrow. I want that Minecraft account.
    [4:23:38 AM] Brian wyatt: im going to call the police
    [4:23:45 AM] ∆яɪsᴛ: Go ahead, I'm using a VPN.
    [4:23:52 AM] Brian wyatt: do somthing i swear to god
    [4:24:11 AM] ∆яɪsᴛ: See, heres the thing.
    [4:24:17 AM] ∆яɪsᴛ: I was going to go to sleep.
    [4:24:22 AM] ∆яɪsᴛ: But now you've got an attitude.
    [4:24:38 AM] Brian wyatt: ...
    [4:25:03 AM] ∆яɪsᴛ: Maybe you should learn to respect high authorities.
    [4:25:06 AM] Brian wyatt: do it and im calling the police
    [4:25:11 AM] Brian wyatt: hackers?
    [4:25:11 AM] ∆яɪsᴛ: K. have fun
    [4:25:16 AM] ∆яɪsᴛ: I'm untracable.
    [4:25:20 AM] Brian wyatt: not high authority
    [4:25:53 AM] ∆яɪsᴛ: So, hows life been to ya?
    [4:26:21 AM] ∆яɪsᴛ: Keep this **bleep** up, and I'll dox you.
    [4:27:18 AM] ∆яɪsᴛ: I can already hear the anger in you voice.
    [4:31:20 AM] ∆яɪsᴛ: Tootloo.
    I hope you're crying.
    I think this is completely unacceptable and he should be banned, because as far as I know, a ddos attack is illeagel, and I would like to get the police involved. Thank you, and I hope something can be done.

    dear Xibi,
    you can use web item 'navigation block'.
    user then can choose which keyfigure(s) to be show in the report, also capability to drilldown etc.
    hope this helps.

  • How to get real time information about how many user are logged in and thei

    I use tomcat as my server platform in Ubuntu for a war file.
    I know in order to get real time information about how many user are logged in, we can count how many active sessions exist by a SessionCounter code. However, I have to permit HttpSessionListener in web.xml of tomcat. From other users' experiences, the configuration is complexed and has some errors.
    Here's the link:http://www.stardeveloper.com/article...1112001&page=1
    In order to get users' ip, in jsp, use request.getremotehost() or
    request.getremoteaddress() by editing the jsp file.
    I wonder if there's some open source software to use for these two purposes.
    Thank you!

    That url is missing a few bits. The ... in the middle doesn't help.
    we can count how many active sessions exist by a SessionCounter code.
    However, I have to permit HttpSessionListener in web.xml of tomcat.
    From other users' experiences, the configuration is complexed and has some errors.And have you tried it? The configuration isn't that complex.
    What errors do you mean? Errors in tracking people, variance in the count? Probably related to internet issues and nothing you can do will alleviate them.

  • How to add user from domain A to a group in domain B

    How would you acheive adding a user from domain A to a group that is in domain B via powershell without the Quest cmdlets? I've been trying to figure this out for about a week now. Please let me know if the scripting guy has seen this issue before.
    LittleTech

    Hello jrv,
    Here's what i was trying to do. The two domains im working with have a trust between them.
    1. Create a user in External.Domain.Com
    2. Add the user in External.Domain.Com to GroupOne in ExternalDomain2.Domain.com
    3. The only knowledge that ExternalDomain2.Domain.Com would have about the account in External.Domain.Com is whatever is in the Global Catalog. Here is what im trying, but it isn't working.
    #Connecting to domain PSDrive
    New-PSDrive
    -Name
    ExternalDomain
    -PSProvider
    ActiveDirectory
    -Root
    -Server
    DC01.Domain.com
    cd
    ExternalDomain:
    #Create user
    #Add to ExternalDomain Groups
    $UserDN=Get-ADUser-LDAPFilter"(sAMAccountName=$UserID)"
    #Connecting to domain2 PSDrive 
    cd
    AD:
    $GroupDN="CN=Wireless
    Device Users,OU=Wireless,OU=Systems and Technology,DC=External,DC=Domain2,DC=Com"
    Add-ADGroupMember-Identity$GroupDN-Members(Get-ADObject-Identity$UserDN.DistinguishedName
    -Server"DC01.Domain.com:3268")
    Connecting via port 3268 allows me to talk to the global catalog instead of LDAP.
    I receive the following message: A Referral was returned from the server
    I know that if i connect using [ADSI] i am able to specify that the connection follows referrals, the AD cmdlets seem to not have that function. The Quest AD cmdlets do... I just dont want to have to use third party cmdlets to do what the AD cmdlets should
    be able to do in the first place.
    THanks,
    LittleTech

  • Report and user statistics display in Obiee report

    I have a requirement in OBIEE like i need to generate a report and that report has to display some valuable information dynamically.
    The report consist following column info...
    Report Name|Report Folder|Report Path|Description|Description ID|Owner|Subject Area
    Header 1
    Header 2
    Header 3
    Header 4
    Header 5
    Header 6
    Header 7
    Header 8
    Header 9
    Report Name
    Report Folder
    Report Path
    Table
    user
    Unused ColumnIDs
    Column Created
    Report Creator (user)
    Report last modified
    like etc..........
    SO, the above said fields has to be update and provide dynamic data in the report. (Also those  field info is not available in Usage tracking table so we need get those information from Catalog manager also...........)
    For this I have one alternate idea like to get the solution by planning to get this solution by CSV file.If you would provide any solution like CSV get updated dynamically from Catalog manager it would be a great thing to me....Your help is highly appreciated.
    How to implement this requirement ............could you provide a right path to achieve this solution.
    I hope yours alternative solution.

    Thanks for the reply Yannick.
    We have install/configure WebCenter analytics and activity graph.
    Wehave added Login Metrics in our Group Space and we are getting default login count for specific time frame but when we define a filter under User Property of any property like city, department name, phone title etc after refreshing data it is giving error like
    WCS#2011.03.31.12.47.31 : Irresolvable error(s) occurred. You may want to contact Administrator with the error reference.
    Please help how to solve this.

Maybe you are looking for