Doubt about RFC Destination in FILE to IDOC Async scenario
hi
In FILE-XI-IDOC Async Scenario we are creating RFC Destination in R/3 and XI.
For Asyn we don't want response But We are Creating RFC Destination in R/3 also.
Any specific reason.
Thanks in advance.
First you need to have a clear understading of how the idoc adapters works.
In xi we create rfc destination and specify that in the port maintenance on the idoc adapter so that we can establish a connection to the sender / receiver system which contains the IDOC METADATA (IDX2) that is required by the idoc adapter to convert the native idoc into idoc xml format.
In R/3 as sender we create rfc destination so that when the idoc has to be transported to the xi system first it will be sent to trfc port that rfc desination that u define the trfc port contains that the target system address(IP) and logon parameters req.So idoc can be sent to the desired destination.
In R/3 as a receiver to facilitate communication we define rfc dest, partner profile and specify the inbound parameters so that idoc can be posted.
Hope this answers your ques.
cheers
*Raj*
*POINTS IF SATISFIED WITH ANSWER.
Similar Messages
-
hi all
I am doing file to idoc bypass scenario....i have to send file containing
EDIDC segment to respective idoc.I have used the idoc name as interface and its also successfully picking the file but while receiving the idoc receiver is showing some error.in sxmb_moni its showing error as obligatory field eiedk01 is missing while its persent in the pay roll of the messege...........please guide me in bypaas
can i check my message expect sxmb_moni .
my receiver adapter is <b>IDOC</b>
sender adapter is<b> XI........</b>
regards
saurabh sharmaLook into the replies by Bhavesh in this thread.
https://forums.sdn.sap.com/click.jspa?searchID=3098859&messageID=3484218
Regards,
Jai Shankar -
File to IDOC Scenario - Doubt in RFC Destination
Hi all,
I m working on a File - IDOC Scenario. I got a IDX1 error Also when I try to import IDOC in IDX2, I got I:000 error message(No more information was given) . When I checked the RFC destination, Test Connection works fine. But Remote Logon didnt work, since the target system is not a Trusted System
Is it necessary to make the Target System, a Trusted System ? (For enabling Remote Logon)Hi ,
There might be some problem with the R3 user that u r using...
For some versions of R3 it is required that the password be in CAPS for making an RFC connection...
I knw this sounds weird but even i had this problem....
Also chk if the XI user has RFC priviliges..
reward points if helpful
PrashANt -
Defining a port /RFC Destination on XI for IDOC to File scenario
When defining a port on XI, what is the client number I am supposed to use to receive the IDOC from R3 to XI. I am assuming that I am supposed to use R3 client number to define the port in XI. Is this correct ?
Please explain this !!!
Also I am assuming the same procedure to define a RFC destination in XI. I am using the IP address of R3 client to define the RFC destination in XI to point to R3. Is this correct ?hi satya
u may refer to the doc attached for more insight on the ports
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660</a> -
Doubt on server proxy and file to idoc scenario
Hi,
I could able to solve most of my doubts from this forum, many regards to all who assisted me.Here are some simple doubts plz help me in solving them.
1.In FILE to PROXY scenario is it necessary to create rfc destination on IS and receiver system? becoz in some blogs it is written to create RFC dest only in case of CLIENT PROXY,since we XI adapter to connect receiver syst in case of server proxy?
2.In FILE to IDOC scen at receiver side is it necessary to formalities in SM59,WE21,WE20 or just configure in WE20 to maintain partner profile?
3. In case of single SLD for DEV,CON,PROD while transferring from DEV TO CON using file system how do we move file in EXPORT DIRECTORY TO IMPORT DIRECTORY of cons system?
4.for transporting IR objects we can use TRANSPORT LIST or CHANGE LIST which will be more preferable?
Plz kindly answer to any of questions u know ?
Points will be rewarded for valuable answers.
Regards,
Smitha.> 1.In FILE to PROXY scenario is it necessary
> to create rfc destination on IS and receiver system?
> becoz in some blogs it is written to create RFC dest
> only in case of CLIENT PROXY,since we XI adapter to
> connect receiver syst in case of server proxy?
You need to maintain the setting on your R3 system to connect to XI for the Transaction SPROXY as shown in the blog "How to Activate ABAP Proxies".
Apart from that as you are doing a file to proxy via XI, XI would need to send data to the R3 system . For this, you can either key in the Details of the R3 system in the XI adapter directly or you can maintain a HTTP destination on your XI in SM59 and use this in the XI adaper.
> 2.In FILE to IDOC scen at receiver side is
> it necessary to formalities in SM59,WE21,WE20 or
> just configure in WE20 to maintain partner profile?
Just the partner porfile. SM 59 and We 21 are used for port and RFC destination and as it is XI that is posting the Idoc these steps are not needed on R3
> 3. In case of single SLD for DEV,CON,PROD
> while transferring from DEV TO CON using file system
> how do we move file in EXPORT DIRECTORY TO IMPORT
> DIRECTORY of cons system?
You have to go to the Folder Level / OS level of your XI server, copy the files from the Export DIrectory and move these manually to the import folder of the CONS server. This is for both IR and ID objects.
> 4.for transporting IR objects we can use
> TRANSPORT LIST or CHANGE LIST which will be more
> preferable?
If you perfrom File Transport, the imported objects will be available under the Import Change List and you need to activate this Import Change List.
Regards
Bhavesh -
Regarding RFC connection in File to IDOC Scenario
Hi everyone,
I was configuring file to Idoc Scenario, i have made all the required configurations in SLD, IR and ID, in XI system and in R/3 System. i have created RFC connection from XI to R/3 system, and its working fine. i have created an Partner profile in WE20 with sender file system name with inbound parameters. <i>But still i am getting error as EDI Partner Profile not defined in WE05- iDOC ADDED WITH ERRORS. </i><b>Do we need to create an RFC connection from R/3 system to XI for file to Idoc Scenario</b>
<b>!!! Note: RFC connection from R/3 system to XI is not working, will this be a problem for file to idoc scenario. !!!</b>
Regards,
Varun Reddy.KHi Varun
Follow these steps
First - Maintain the Sender R/3 System:
SM59 : Create a RFC destination to XI
WE21 : Create a TRFC Port ->Specify the RFC Destination Created
BD54 : Create a Logical System for the Idoc Receiver
WE20 : Create Partner Profile ->Maintain Outbound and the Inbound Parameters
Second - Log on to XI System:
SM59 : RFC Destination for Sender System
IDX1 : Create the port to get Idoc Metadata from Sender System ( The Port Name must match the port name in the idoc header - Usually in format SAP<System ID>. eg. SAPID1 [Optional Step. Not mandatory]
IDX2 : Maintain the Idoc Metadata. This is needed only by XI, and not by other SAP systems. IDX2 is needed because XI needs to construct IDoc-XML from the IDoc. No other SAP system needs to do that.
Regards,
Santosh -
RFC Destination not getting connected - IDoc to XI scenario
Hi Everybody,
I want send an IDoc from R/3 System to Xi, I have created Two logical systems (Sender and Receiver correspondingly) and i have assigned the clients to them.
Once i create RFC destination, i have specified all my technical settings as well as Login/Security settings, once i click, "Remote Log On" it takes me directly to Login page of XI. Please guide me how to solve the problem. If i click Test---> Authorization, it prompts out with an error "Name and Password is incorrect (repeat Logon)", but i have given exact username and password.
I am a fresher to XI.... please give me some documents related to IDoc to XI scenario step by step to [email protected] I would be grateful and appreciate you if u would help me to sort out this problem....
Please give me step by step solutions.... Thanks in Advance...
Regards/GuruRequirements in R3 system:
1. Create RFC destination pointing to XI in SM59
2. Create port for XI using we21
3. create Outbound Entry in partner Profile for XI in we20.
Requirements in XI system:
1. Create Technical System pointing to the R3 system.
2. create Business System pointing to the R3 system.
If you want to send IIDOC out of XI,
1. SM59 - Create RFC destination
2. IDX1 - Create port
3. IDX2 - Import Metadata.
Note:u dont need a IDOC sender adapter or a Sender Agreement to sent a IDOC to XI.
Check dis link for more info:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cdded790-0201-0010-6db8-beb9bb2b2660
please refer to michel book on IDCO usage in XI
Message was edited by:
Sreeram Reddy -
Doubt in fields - message mapping (file 2 idoc scenario)
while doing message mapping in file 2 idoc scenario, i could not able find the values for some field names
( i am following this wiki help
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC& )
cremas04 idoc
vendorNo LIFNR
vendor name Name1
Pur_org ? ( I could not able locate field with the similar desc in idoc MT side)
Company code ?
Acc_Grp ?
Search term MCOD1
Address ADRNR
City ORT01
Pin_code PSLTZ
could you help me out with this?
Message was edited by: praba
prabahi,
I got the answer. -
Generating partner profile for File to Idoc(CREMAS) scenario.
Dear friend,
Completed all the steps in SLD, IR and ID.
I do not know how to create Partner profile and I skipped this step.
While testing I got the error "Unable to convert sender service to an ALE logical system".
I think i got this error because I have not created partner profile.
Could anybody tell step by step process of creating partner profile including logical system names( Sender and Receiver)?
I have seen many blogs and i couldn't get clear picture on how to generate partner profile.
My sender system is XI server and receiver is R/3.
I have created RFC destination, Port also.
Thanks in Advance
Chirugenerally u create partner profiles using transaction WE20.
SAP Menu -> Tools -> IDoc Interface/ALE -> Administration -> Runtime Settings -> Partner Agreement (WE20).
go through this link for step by steps
http://help.sap.com/saphelp_nw2004s/helpdata/en/dc/6b808e43d711d1893e0000e8323c4f/content.htm
http://www.thespot4sap.com/Articles/SAP_ALE_Configuring.asp -
File sender adapter:FILE to IDOC without BPM, can't see in SXMB_MONI.
Hi all
I have a FILE - XI - IDOC Async scenario without BPM.
I configured FILE sender adapter and IDOC receiver adapter. I made a mapping to transfer file data to the structure of IDOC.
Now when i am trying to load the file using command prompt, i cud see nothing in the monitoring. Whereas if i go to the communication channel monitoring of runtime workbench, i saw that CC is polling correctly and was reading the file also.
And also wen i saw in the processed folder which i mentioned in the CC configuration for the ARCHIVE DIRECTORY, i saw that file got transferred to the folder also.
I don't understand why i cant see anything in the monitoring.
Could anybody help me to rectify the problem. Is there anything i m missing ?
Regards
NainaRajesh/Amar
TCode:: SXMB_ADM->Integration engine configuration->specific configuration->runtime
Trace_Level = 3 then you can get all MONI PIPELINE Steps also
I did this change but cudn't see anything in SXMB_MONI.
This is how i have configured my process:
http://wiki.sdn.sap.com/wiki/display/XI/FiletoMultipleIDOCSplittingwithoutBPM
But instead of IDOC splitting i have simple FILE - XI -IDOC scenario.
I have configured everything exaclty the same way it is mentioned here. But for me the process is not visible at all.
I can't even see the first request message in the monitoring.
This is the message i can see in the communication channel monitoring:
2010-05-24 09:07:41 Success Channel CC_*: Entire file content converted to XML format
2010-05-24 09:07:41 Warning Channel CC_*: Empty document found. Proceed without sending message
2010-05-24 09:07:41 Success File "/xyz/ABC.txt" archived after processing
Is there any problem with the file and that could be the reason it cant convert the file to the request message MT_REQUEST and thus am not able to see anything in monitoring.
help me guys....this is a simple process and i m stuck...its frustrating
Regards
Naina -
File to Idoc Scenario using third party systems
hi,
Working with a File to Idoc Scenario. Been able to successfully define everything in IR / ID. However when I go to BD87 (reciever system) and see the status of Idoc processed - getting the error code 51 "Function Module Not Allowed: <Function Name>" . What could be the reason for this???
Have defined partner profiles in WE20 of type LS and also specified an inbound paramter in the post processing tab for partner profile. Are there any other settings I need to take care of to avoid getting that error.Hi
I am giving u all the steps whioch are required for
<b>File to IDoc</b> Scenario
SM59- Create RFC destination
IDX1- Create a IDXPORT in idx1
IDX2-3. Import metadata of IDocs in idx2
Bus. service adapter specific Identifiers-->Logical sys name
we05-IDoc status records
BD54-Create Partner Number
We20-Create Partner Profile
WE19-Testing IDoc Processing
SE16-Table name->LFA1 to check vendor has been created
Check have u followed all the steps.
Regards
Arpit Seth -
BPS retraction RFC destination conversion
Hello everybody,
I m surprised not having met a discussion about RFC destination conversion between systems for BPS retraction?
What is the common recommendation for BPS retraction to have your customizing adapted and to retract to your QUAL R/3 from your QUAL BPS system without having to replicate your customizing with hard coded RFC destination to allow every BPS system to retract to any R/3 system !! Why this does not read the RFC conversion table from BW, probably too easy ?
If you have feed back on this point I would really appreciate , many thanks .
Laurent AllaisHello Laurent,
I agree, it would be nice if the system would convert the RFC destinations. The functionality is just not there. You can use a single RFC destination for all systems and just have a different server that it is pointing to in SM59.
Or you just make a change in BPS0 after the transport. It's quite common for plan administrators to have access to BPS0.
Regards
Marc
SAP NetWeaver RIG -
IDOC to EDI file scenario and EDI file to IDOC scenario without Seeburger
Hi All,
IDOC (Invoice) to EDI file scenario without Seeburger
Pls let me know if anybody have blogs for the same
EDI file to IDOC (Orders) scenario without Seeburger
Pls let me know if anybody have blogs for the same
RegardsHi Rachit,
>>Can anybody send me blogs to convert IDoc structure to EDI or EDI to IDoc structure using Conversion Agent or using JAVA Mappings.
Using conversion Agent there is no coding, If you have a conversion agent insatlled in your landscape you will have better understanding..
Also java code for IDoc to EDI have some problems:
1. The EDI format differs based on requirement so there will always be a customized code for it.. Like we have IDco to EDIFACT and ANSX12...
2. Because most of these codes are propriety materials I doubt whether anyone be sharing the complete code here in SDN. Better to have a java consultant at your end and put him with your requirement.. From the reply in above threads you should be clear that what you are looking for can be done from java coding..
All the best
Regards
Suraj -
RFC Destination to test EDI outbound process
Hi,
I am configuring RFC Destination. SAP provides a tool to test EDI outbound process even when EDI subsystem is not actually connected. Do you know what the RFC destination settings should be in this scenario? Thank you.Hi,
Please check this links perhaps they may help.
http://publib.boulder.ibm.com/infocenter/wbihelp/v6rxmx/index.jsp?topic=/com.ibm.wbia_adapters.doc/doc/mysap3/sap109.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/be/6e0f41218ff023e10000000a155106/content.htm
Regards,
Ferry Lianto -
Issues in IDoc Sender Scenario:IDoc with errors added
Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
ChilankaHi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Grand Total not displaying correctly on Column level security.
Hi All, I have implemented the Column level security for three columns. But in dashboard report. The grand total is not displaying correctly. The grand total values are still displayed for the hidden columns. Is there any work around for this. The sa
-
Assign search help for a screen field in standard program?
Hi All, Is there any other way to assign search help to a standard SAP screen field? (to be precise i want to assign search help to Recipient field in table control of components tab in transaction IW32/IW31) I know we can do this by assigning search
-
Two issues about macbook display
i have 2 questions for everyone of you... just to know the situation 1) does your display have, in the bottom horizontal line, a stripe more white than the rest? 2) does your display have darker corners? please add if your macbook is CD or C2D, and i
-
Hi, The current set-up of our E-business suite is a two node install:- The DB Tier (Database and Concurrent Manager) on one node The Apps Tier (Forms /Web Server) on another node. For the HA solution (NON ORACLE RAC) we are planning to:- Move the DB
-
Mac pro internel speakers not working?
So basically I go to watch a youtube video and there is no sound so I turn it up to full still no sound then I try another video no sound. Then I play on minecraft which had no sound as well then I decide to plug my skull candy in'kneds in still no