Doubt about SMS SITE COMPONENT MANAGER

Please, I'm having doubt about my SMS_SITE_COMPONENT_MANAGER, my print:
Is this a problem or no?How to solve this?In this case not problem how to identify or why display message: Component not Installed by Site Component Manager.
I read this link: http://www.informit.com/articles/article.aspx?p=1926197&seqNum=5 and I have more confusing about this.Thanks.

This is normal. No action is required.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson
Thanks Hampson,but in your environment do you have same case? These options are : Component not Installed by Site Component Manager? Thanks.

Similar Messages

SMS Site Component Manager failed to install this component on this site system.

Hi,
I'm setting up the SCCM in native mode. All components are in a OK state but the component SMS_MP_CONTROL_MANAGER is in critical. When I look at the alerts there is the following description:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SMS Site Component Manager faild to install component SMS_MP_CONTROL_MANAGER on server SCCMTEST.
The WebDAV server extension is either not installed or not configured properly.
Solution: Make sure WebDAV is installed and enabled. Make sure there is an authoring rule that allow "All users" read access to "All content". Make sure the WebDAV settings "Allow anonymous property queries" and "Allow property queries with infinite depth" are set to "true" and "Allow Custom Properties" is set to false.
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
All requirements are setup according to the links http://technet.microsoft.com/en-us/library/cc872789.aspx and http://technet.microsoft.com/en-us/library/cc431377.aspx. The WebDAV is enabled, the settings "Allow anonymous property queries" and "Allow property queries with infinite depth" are set to "true" and "Allow Custom Properties" is set to false. I got some messages from the MPSetup.log:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<03-24-2009 16:14:41> [Allow property queries with infinite depth] should be true (false)
<03-24-2009 16:14:41> [Allow Custom Properties] should be false (true)
<03-24-2009 16:14:41> [Allow anonymous property queries] should be true (false)
<03-24-2009 16:14:41> Allow [All users read access to All content] authoring rule should exist (exist)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
What should I do? Is there any specific setting in the IIS to be setup? Which log file contain more detailed information?
Thanks in Advance,
Giancarlo

Hi Torsten,
Yes I did. Below the entries found in mpsetup.log:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
<03-26-2009 09:09:26> ====================================================================
<03-26-2009 09:09:26> SMSMP Setup Started....
<03-26-2009 09:09:26> Parameters: E:\PROGRA~1\MICROS~1\bin\i386\ROLESE~1.EXE /install /siteserver:SCCMTEST SMSMP
<03-26-2009 09:09:26> Installing Pre Reqs for SMSMP
<03-26-2009 09:09:26> ======== Installing Pre Reqs for Role SMSMP ========
<03-26-2009 09:09:26> Found 1 Pre Reqs for Role SMSMP
<03-26-2009 09:09:26> Pre Req MSXML60 found.
<03-26-2009 09:09:26> No versions of MSXML60 are installed. Would install new MSXML60.
<03-26-2009 09:09:26> Enabling MSI logging. msxml6.msi will log to E:\Program Files\Microsoft Configuration Manager\logs\msxml6MSI.log
<03-26-2009 09:09:26> Installing E:\Program Files\Microsoft Configuration Manager\bin\i386\00000409\msxml6.msi
<03-26-2009 09:09:27> msxml6.msi exited with return code: 0
<03-26-2009 09:09:27> msxml6.msi Installation was successful.
<03-26-2009 09:09:27> ======== Completed Installion of Pre Reqs for Role SMSMP ========
<03-26-2009 09:09:27> Installing the SMSMP
<03-26-2009 09:09:27> Passed OS version check.
<03-26-2009 09:09:27> IIS Service is installed.
<03-26-2009 09:09:27> checking WebDAV configuraitons
<03-26-2009 09:09:28> WebDAV settings is not setup appropriately
<03-26-2009 09:09:28> [Allow property queries with infinite depth] should be true (false)
<03-26-2009 09:09:28> [Allow Custom Properties] should be false (true)
<03-26-2009 09:09:28> [Allow anonymous property queries] should be true (false)
<03-26-2009 09:09:28> Allow [All users read access to All content] authoring rule should exist (exist)
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

SMS Site Componenet Manager - Componenet Not Installed

Hi,
We're using SCCM 2012 R2 with the databases on a SQL 2012 Failover Cluster (2 nodes). Active node is SQLNode-1. We're getting the following error:
Site Component Manager could not create the Configuration Manager Server Components' installation directory "J:\SMS_SCCMSERVER.domain.com" on site system "\\SQLNode-1" or set the correct permissions on
the directory.
As far as I can tell, we've created the NO_SMS_ON_DRIVE.SMS file on all the drives in both SQL nodes except for the D:\ drive.
On sqlnode-1, I noticed the following registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SMS_SITE_SQL_BACKUP_SCCMSERVER.domain.com\ImagePath has the following value:
J:\SMS_SCCMSERVER.domain.com\bin\x64\smssqlbkup.exe
There's no J:\ drive on sqlnode-1. So I compared the same key in sqlnode-2 (passive node) which has the following value:
D:\SMS_SCCMSERVER.domain.com\bin\x64\smssqlbkup.exe
So I changed the value on sqlnode-1 to be the same as sqlnode-2. Restarted the sms_site_component_manager service but still the same error persists.
I then move the clustered sql instance to sqlnode-2, error still persists. Move it back to sqlnode-1 and error still persists.
Both sql servers have the same value of "sqlnode-0\sccm" in the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\Components\SMS_SITE_SQL_BACKUP_SCCMSERVER.domain.com\SQL Server Instance
sqlnode-0 is the cluster name.
In SCCM, sqlnode-1 and sqlnode-2 have the following roles:
component server, site database server and site system
sqlnode-0 has just one role:
site system
How can I correct these errors and get the components installed on the correct D:\ drive on sqlnode-1.
Thanks.

Have you seen http://blogs.technet.com/b/smartinez/archive/2014/06/11/you-implemented-a-sql-cluster-for-sysctr-2012-r2-configmgr-and-you-forgot-what.aspx?
Torsten Meringer | http://www.mssccmfaq.de

Site Component Manager failed to reinstall this component on this site system

Site Component Manager failed to reinstall this component on this site system.
Solution: Review the previous status messages to determine the exact reason for the failure. Site Component Manager will automatically retry the reinstallation in 60 minutes. To force Site Component Manager to immediately retry the reinstallation, stop and
restart Site Component Manager using the Configuration Manager Service Manager.

I concur with Vik, sitecomp.log records details about the maintenance of the installed site components on all site system servers in the site.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

About sms and power management api?

hi everybody,
i need to send sms from my application, also my application needs to restart at every 5 mins, for that i need powermanagement api, but i searched all document i cant find, please anybody help me for finding sms and power management api?
Regards,
karthik

hi anybody find solution?

Doubt about Oracle Acess Manager Identity System

Hi , I have a doubt about the identity system , when I configure the Identity System to use the Data Anywhere where the user is create when I create one in administrative console ? as I know the Data Anywhere is managed by OVD.
Thanks.

And I could connect to the database.With which tool?
>
I wanted to mimic the connection to another system by just copying the c:\oracle folder. The connection was established and works fine.What type of client installation is this? Can you cross check in inventory/logs?

Doubt about Component binding....

I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).
Please clarify this doubt...........

JNaveen wrote:
I have a doubt about component binding because I am also using component binding in my application, in my application each page has more than 20 components and each page is session scope, at one point I am getting message like perm space(this is because of lack of memory, actually I have 4gb ram). So my is
"does the jsf creates new object for every reload, because of that my jvm filling with all the objects?".This is regardless of the component binding. JSF creates a component tree and stores it in the session. With component binding you can link between the backing bean and the component without the need for UIViewRoot#findComponent().
Think your problem lies somewhere else. Use a profiler.
Another question is "what is the difference between value binding and component bindings?, and drawbacks of each other" please tell me the differences between them up to the very low level(up to memory usage for each approach).With the component binding you can get hold of the whole component from the tree in the backing bean. Useful if you want to do a bit more than only holding the component's value, with which you usually do with the value binding.

Doubts about BP number in SRM and SUS

Hello everyone,
I have some doubts about the BP number, especially for Vendors.
I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
- Can I have the same BP number in SRM and SUS?? Or is it going to be different??
- When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
- When is it necessary to replicate vendors from SRM to SUS??
Thanks
Ivá

Dear Ivan,
Here is answer to all your questions. Follow these steps for ROS configuration:
Pls note:
1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
2. No need of XI to transfer new registered vendor from ROS to EBP
Steps to configure scenario:
1. Make entries in SPRO --> "Define backend system" on both clients.
    You will ahev specify logical systems of both the clients (ROS as well as EBP)
2. Create RFCs on both clients to communicate with each other
3. In ROS client create Service User for supplier registration service with roles:
    SAP_EC_BBP_CREATEUSER
    SAP_EC_BBP_CREATEVENDOR
    Grant u201CS_A.SCONu201D profile to the user.
4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
    attributes. create vendor org structure in ROS client
6. Create your ROS registration questionnaires and assign to product categories- in ROS client
7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
    defined as supplier directory in SRM server - EBP client.
    Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
    Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.)
8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
9. Modify purchaser role in EBP client:
    Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
10.Maintain organizational data in make settings for business partner
Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
I hope this clarifies all your doubts.
Pls reward points for helpful answers
Regards,
Prashant

I can't find anything about how to properly manage the tablet's layout in horizontal or in vertical position.

I can't find anything about how to properly manage the tablet's layout in horizontal or in vertical position.
If I consult my website in vertical position, it's ok but, If I turn my tablet, all the hyperlinks and all general visualization are wrong.
How I can properly handle both views?
PS: I'm sorry for my bad english

Could you share the site URL so we may check at our end? Also could you share some screenshots explaining the 'wrong hyperlinks and visualization'.
Thanks,
Vikas

Doubts about Temporary Table.

Hi,
I am using Temporary Table.
But the insert command takes too much time compare to insert in Normal table.
One more doubt about Temporary Table is:
Suppose there are two different users. They connect and first insert rows of their use .Now they go for select.
Does select of one user goes to check the rows of second user also or the temporary table treats 2 users data as inserted in 2 different tables?
Help!!!

Nested structure (not deep - deep means their a string or a table as a component)
TYPES: BEGIN OF tp_header_type,
         BEGIN OF d,
           empresa TYPE ...
           num_docsap TYPE ...
        END OF d,
        awkey TYPE ...
      END OF tp_header_type.
matt

Doubt about message in SmsAdminUI.log

Hi guys,
I have a doubt about this message error in SmsAdminUI.log occur when I open console SCCM 2012:
[6, PID:18032][DATE 08:13:35] :System.Runtime.InteropServices.COMException\r\n\r\n at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
[1, PID:9828][DATE 11:53:21] :Property: 'Compatible'\r\nSystem.Management.ManagementException\r\nNot found \r\n at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
My console open normally, any help?
Thanks.

I would not worry about it as long as the console works as expected.
Torsten Meringer | http://www.mssccmfaq.de

Doubt about Fitting

Hi everybody
i have a little doubt about the "Linear Fit .vi"; i see the help page and i undestand that it takes a set of value X and Y and makes out the best fitting of the Y value. I tried to use it in a project and:
In the first block (the upper one) it takes a data set (X,Y) and makes the fit..ok!
In the second one (the lower one) it takes a ramp signal + noise data in the Y input and just the ramp signal in the X input.. how can he makes the fit?
It takes the same signal, how can it read the x value and the y value ? If i have a waveform in "dynamic data set" how can i separate the X and Y component? can i put the same signal in the X and Y input ?
I hope to be clear.. i just want to know how can the .vi read several kind o input.
Thank you
Nigeltorque
Attachments:
STATIC ResponseMOD.vi ‏30 KB

I post the attachement in older version too..
Nigeltorque
Attachments:
STATIC ResponseMOD 8.6.zip ‏39 KB

Doubt about Substitution Rules

Hello gurus!
We have a doubt about Management Substitution Rules. We fully understand all the benefits of this feature and tried to communicate to all our personnel to make it work properly, but as we have a big staff and not everybody have the same "skills" understanding technology, we eant to have a different approach to this: we want to develop a "user friendly" interface, as a single acreen where we can emulate all the features of Substitution Rules, but we want to know if there is a control program or a Function that controls this, and the understand it fully to achieve this. Anybody knows if this is possible?
Regards IA

Hi,
If you use UWL only with one backend system, you can easily build your own application for example with web dynpro ABAP. Just use the function modules SAP_WAPI_SUBSTITUTE* to do the different operations (creating, deleting substitutions, etc.).
If you have multiple backend systems, it is a bit more complicated. You could build your own (Java WD) application by using the Substitution API. Check the docs at: http://help.sap.com/javadocs/NW04S/SPS09/uw/com/sap/netweaver/bc/uwl/IUWLSubstitutionManager.html
Both approaches work.
Regards,
Karri

Doubt about webDynpro windows

HI Experts,
I have small doubt about webdynpro windows.
1) If i have only one application in webdynpro DC , what is use of using multiple windows.
2) If i have multiple windows in a DC which has single application, how i can i navigate between windows?
3)if i have multiple applications with multiple windows, then how will i know which window belongs to which application.
4)If i have multiple windows and multiple applications, then how can we navigate between windows? It means navigation betn windows and navigation betn applications...?
Please explain me, i browsed in SDN, i found the threads but they are explaining my doubts exactly
Thanks in advance.
Regards,
Bala

Hi.
Simply the Window is part of Web Dynpros public interfaces, and are needed whenever you want to access a graphic component from outside of your web dynpro component.
Web Dynpro uses the MVC design pattern. Model View Control.
In order to reuse components, Web Dynpro exposes the View and Controller to the outside world.
Internally the View and Control in MVC is just that:
Views
Component Controller and Custom Controller.
Externally the View and Control are exposed as
Interface Controller and Interface Views. The Interface View is the external part of a Window. (When a Window is created, an associated Interface View is created).
So, to be able to actually see anything from a Web Dynpro application. The browser would access a Interface View that opens the Window with some view in it.
An other example is that you have two Web Dynpro projects, where the first one have a View with an integrated view from the second Web Dynpro. The integration would be through the Interface View again.
Internally in your Web Dynpro component, you can use the views directly (i.e. navigate between views).
Opening an external popup would generate a new browser window. In order for the new browser window to display anything it would need to access an interface view. That's why you need to create a separate Window when you want to use a popup.
Regards.
Edited by: Mikael Löwgren on Feb 15, 2008 12:58 PM

Doubt about ccm.log error= 0x8004100E

Hello guys,
I have a doubt about when ccm.log display error = 0X8004100E.
So, some my desktops scan by SCCM display error= 0x8004100E but client sccm is installed with sucess. My doubt is what reason display this error?
Maybe can I don't worry about this,but I need know reasons display this messages.
Thanks a lot.

This will be displayed if your site server cannot connect to ccm WMI namespace on the worksation. CCM wmi namespace will only be available if the workstation has ConfigMgr client, hence this will eventualy fail for the workstation that are new to
ConfigMgr. I guess sccm uses this to check if the client is already present or not.
Kindly mark as answer/Vote as helpful if a reply from anybody helped you in this forum. Delphin

Doubt about SMS SITE COMPONENT MANAGER

Similar Messages

Maybe you are looking for