Doubt about sys fans and connection of water cooler pump

Hello, I have a motherboard MSI Z97 gaming 7 and need to know which connector you guys recommend connecting the water cooler pump H60 Corsair: sys fan or cpu fan?
I want to connect the pump in the sys fan 1, 2 or 3, but need to know if I can put the SYS Fan running at full speed 100% for some bios option, it is possible? So I can leave the option CPU Fan 1 and 2 free for fans.

Quote from: madmecca on 14-May-15, 06:56:08
I have my h100i fans on cpu 1 and 2 and pump on system fan 3 no problems
You can put the sys fan running the pump at maximum speed?

Similar Messages

  • Doubt about JAVA stack and ABAP Stack

    Good day!
    Hope can help me with my next doubt. I understood that BI JAVA or JAVA has been embedded in the Java support package stack for portal. But for BI7 the installation for JAVA is by sps. We only use pure support package for BI7, we don't use support package stacks and we don't use JAVA. I'm not sure because i don't made the sap installation in our enterprise, how can i be sure if we have installed java in BI7 and if we don´t have installed, should I install Java in our sap system? what are the benefits and consequences if I decide install it? and what is the difference about BI java (portals) and JAVA stack for BI7?
    I try to find some information but I found some information  about bi Java for portals, but not for BI.
    Ramón Sánchez

    Hai,
    BI-7.0,JAVA:BI-Java is used to provide the Java runtime for scenarios such as Enterprise Reporting, Query, and Analysis as well as Business Planning and Analytical Services.BI-Java requires AS Java and Enterprise Portal Core and EP in the same system. Optionally, you can combin with other usage types in one system. Usually, scenarios running on usage type BI-Java also require usage types BI and AS ABAP. While installing BI-Java, AS Java, EPC and EP get installed automatically. Usually, when running on usage type BI-Java also require usage types BI and AS ABAP, you should be aware that no matter if you run BI and BI-Java in the same or in separate systems, both BI and BI -JAVA should be kept in sync in terms of Support Package Stacks.
    BW 7.0 is now called as BI 7.0. There are many differences between them in areas like extraction, EDW, reporting, analysis administration,etc.,
    http://www.ittestpapers.com/articles/987/2/SAP-BI-70-Features/Page2.html
    Advantage of having Double stack Instance: Where AS ABAP provides the complete technology and infrastructure to run ABAP applications and AS JAVA provides Java Enterprise Edition environment for developing and running Java programs.
    Regards,
    Yoganand.V

  • Doubts about HTTPS requests and Java proxy

    Hello,
    I need help about SSL connections and Java.
    I'm developing a HTTP/S proxy with Java. To test my proxy, I use Firefox. I configure the proxy option in the browser. The proxy works good with HTTP requests, but with HTTPS requests doesn't work and I don't know why.
    I explain the steps that I do for a HTTPS request:
    * The browser sends a CONNECT message to the proxy.
    I check that the proxy receives the CONNECT request correctly.
    * The proxy establish a secure connection with the content server.
    I use an SSLSocket to connect with my content server, and the SSL handshake is succesful.
    * The proxy sends a 200 HTTP response to the client:
    I send
    HTTP/1.0 200 Connection established[CRLF]
    [CRLF]
    to the application client (Firefox)
    * The proxy sends/receive data to/from Firefox/content server
    I have a Socket between Firefox and my proxy, and a SSLSocket between my proxy and my content server. I use two threads to communicate the client and the server.
    Java code:
    //Thead server-->proxy-->application(Firefox)
    ThreadComm tpa = new ThreadComm(bis_serverSSL, bos_app);
    //Thread application(Firefox)-->proxy-->server
    ThreadComm tap = new ThreadComm(bis_app, bos_serverSSL);
    The "tpa" thread reads from the SSLSocket between the proxy and the server and sends data to the Socket between the proxy and Firefox.
    The "tap" thread reads from the Socket between the proxy and Firefox and sends data to the SSLSocket between the proxy and the server.
    This is the class ThreadComm:
    public class ThreadComm extends Thread{
        private BufferedInputStream bis = null;
        private BufferedOutputStream bos = null;
        public ThreadComm(BufferedInputStream bis, BufferedOutputStream bos) {
            this.bis = bis;
            this.bos = bos;
        @Override
        public void run() {
            int b = -1;
            FileOutputStream fos = null;
              do {
                   try {
                        b = bis.read();
                        System.out.print((char) b);
                        fos.write(b);
                        bos.write(b);
                        bos.flush();
                   } catch (Exception ex) {
                        Logger.getLogger(ThreadAplicacionProxy.class.getName()).log(Level.SEVERE, null, ex);
                        //b=-1;
              } while (b != -1);
        }But this doesn't work and I don't know why.      
    I have an Apache server with the mod_ssl enabled as content server, I can send requests (with Firefox) to the port 80(HTTP request) and 443(HTTPS request) without use my proxy and it works. If I use my proxy, HTTP request works but with HTTPS request doesn't work, I look the log of Apache and I see:
    [Tue Apr 27 17:32:03 2010] [info] Initial (No.1) HTTPS request received for child 62 (server localhost:443)
    [Tue Apr 27 17:32:03 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
    [Tue Apr 27 17:32:03 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
    [Tue Apr 27 17:32:03 2010] [info] [client 127.0.0.1] Connection closed to child 62 with standard shutdown (server localhost:443)
    Why it say? Invalid method in request \x80\x7f\x01\x03\x01 , my proxy sends the data that the Firefox sends.
    I think than I have follow the explanations of [1] but doesn't work, I have problems in implementation in Java but I don't know where.
    I appreciate any suggestions.
    Thanks for your time.
    [1] http://www.web-cache.com/Writings/Internet-Drafts/draft-luotonen-web-proxy-tunneling-01.txt

    ejp, I have checked the socket between the proxy and server and ... You are right! , I was using the port 80 instead of the 443 (incredible mistake!, I'm sorry). I was convinced that I was using the port 443... Well, is a little step, but I still have not won the war :)
    If I see the log files of Apache, We can see that something goes wrong.
    localhost-access.log
    >
    127.0.0.1 - - [04/May/2010:17:44:48 +0200] "\x 80\x 7f\x01\x03\x01" 501 219
    >
    localhost-error.log
    >
    [Tue May 04 17:44:48 2010] [info] Initial (No.1) HTTPS request received for child 63 (server localhost:443)
    [Tue May 04 17:44:48 2010] [error] [client 127.0.0.1] Invalid method in request \x80\x7f\x01\x03\x01
    [Tue May 04 17:44:48 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
    [Tue May 04 17:44:48 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
    >
    I think that this happens because Apache receives the data without decrypt, this is the reason because in the log we can see the "Invalid method in request \x80\x7f\x01\x03\x01". This supposition is true?
    ejp, you say that the "Termination is quite tricky." I have changed my code following yours suggestions (using the join and the shutdownOutput) but the threads don't die.
    I explain you what I do:
    (in time 1)
    I launch the thread (threadFirefoxToApache) that reads data from Firefox and sends to Apache.
    I launch the thread (threadApacheToFirefox) that reads data from Apache and sends to Firefox.
    (in time 2)
    threadFirefoxToApache sends the firts data to the server.
    threadApacheToFirefox is waiting that the server says something.
    (in time 3)
    threadFirefoxToApache is waiting that Firefox says something.
    threadApacheToFirefox sends data to Firefox.
    (in time 4)
    threadFirefoxToApache is waiting that Firefox says something.
    threadApacheToFirefox is waiting that Firefox says something.
    and they are waiting... and never finish.
    In time 2, these first data are encrypted. The server receives these data and It doesn't understand. In time 3, the server sends a HTTP response "501 Method Not Implemented", here there is a problem because this data must be encrypt. According to the documentation that I read, the proxy cannot "understand" this data but I can "understand" this data. What's happen?
    Firefox encrypt the data and send to the proxy. This It's correct.
    The proxy encrypt the data another time, because I use the SSLSocket to send the data to the server. Then the server receives the data encrypted two times, when decrypt the data gets the data encrypted one time. And this is the reason why the server doesn't understand the data that sends Firefox. It's correct? May be.
    Then If I want that the server receives the data encrypted one time I need to use the socketToServer, It's correct?
    I will supposed that yes. If I use the socketToServer, the proxy doesn't understand nothing, because the data received from the socketToServer are encrypted (I only see simbols), but the Apache log says that there is a problem with the version? (If I use the socketToServer the threads die)
    >
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 read finished A
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write change cipher spec A
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 write finished A
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1760): OpenSSL: Loop: SSLv3 flush data
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1756): OpenSSL: Handshake: done
    [Tue May 04 19:55:42 2010] [info] Connection: Client IP: 127.0.0.1, Protocol: TLSv1, Cipher: RC4-MD5 (128/128 bits)
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1817): OpenSSL: read 5/5 bytes from BIO#29bd910 [mem: 29ea0a8] (BIO dump follows)
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1750): -------------------------------------------------------------------------
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1789): | 0000: 80 7f 01 03 .... |
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1793): | 0005 - <SPACES/NULS>
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_io.c(1795): ------------------------------------------------------------------------
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
    [Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] SSL library error 1 reading data
    [Tue May 04 19:55:42 2010] [info] SSL Library Error: 336130315 error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number
    [Tue May 04 19:55:42 2010] [debug] ssl_engine_kernel.c(1770): OpenSSL: Write: SSL negotiation finished successfully
    [Tue May 04 19:55:42 2010] [info] [client 127.0.0.1] Connection closed to child 63 with standard shutdown (server localhost:443)
    >
    What option is the correct? I need use the SSLSocketToServer or socketToServer to send/read the data to/from the server?. Use the SSLSocket has sense because the data travel in a secure socket, but use the Socket also has sense because the data are encrypted and they are protected by this encription. It's complicated...

  • Doubts about the advantages and disadvantages of BEx Analyzer

    Hi people!
    Do you know in specific. What are the advantages and disadvantages of BEx Analyzer?
    and Do you know the limitations and scope of the bex analyzer?
    Talking about the security issue. What kind of resticciones be applied to end-users to control information. Protecting system
    resources and the information that the user uses, not be manipulated.
    I hope you could answer my doubts
    Ramon
    Thanks

    Hi!
    The standard BEx BI 3.x tools, is no longer available with the SAP NetWeaver 7.0 BI tools; however, it is part of the SAP BI add-on installation that, by default, will install the BW 3.x tools along with the newer BI 7.0 tools.
    We want to prevent unauthorized download of data to excel sheets from users who have installed bex analyzer but are not authorized to do that. Certain users only have to access querys from web and shouldn't have to use reports from bex analyzer.
    The only accepted way to access reports for all users is by using web querys published in our intranet. But many users have bex analyzer installed and we don't want that an unauthorized user download data to a excel sheet via bex analyzer.
    I'm testing with one user with this roles, but bex web template and bex analyzer have similiar object authorizations, and i don't know if is possible prevent unauthorized download of data from excel sheets.
    Final users don't access to bex analyzer by rrmx transaction
    Until know i'm testing with this user roles:
    1. ZBW:BEX_WEB:RFC (for web templates)
    S_RFC:
    ACTVT:     16
    RFC_NAME:
    RFC1
    RSBOLAP_BICS
    RSBOLAP_BICS_CONSUMER
    RSBOLAP_BICS_PROVIDER
    RSBOLAP_BICS_PROVIDER_VAR
    RSOBJS_RFC_INTERFACE
    RSRCI_LOCAL_VIEW
    RSWRTEMPLATE
    SDIFRUNTIME
    SYST
    RFC_TYPE:  FUGR
    2. ZBW:BEX:RFC (for Bex Analyzer):
    ACTVT:     16 
    RFC_NAME:
    RSOBJS_RFC_INTERFACE
    RSR_XLS_RFC
    RZX0
    SDIFRUNTIME
    SM02
    SUNI
    SYST
    RFC_TYPE:  FUGR
    please take in count this points:
    1. Prevent unauthorized download of data to excel sheets from users that should have accees only querys from web not bex analyzer (very important this point)=
    2. what are the disadvantages of BEx Analyzer, if only if limited by excel...from other point like performance, workprocess with long runtimes, memory issues, for said something.
    I don't know if i'm going by good way.
    Somebody could help me?
    Ramon

  • Doubt about integration CUCM and VoIP Provider

    Hi Guys,
    I have the follow doubt: Is possible to do integration CUCM and VoIP Provider using authentication? Is there necessary another equipment to do this? CUBE for example? or another alternative
    Thanks,
    Wilson

    If you are referring to authentication over sip trunk, then NO! CUCM doesn't do authentication you will need a CUBE for that

  • Doubts about "due date" and "overdue date" configuration

    Hello,
    On transaction FB5LN or FBL1N is possible to view the status of the items, and those statuses are referred to a "Net Due Date Symbol".
    Doubts:
    1) I want to know what is the difference between the "item is overdue" symbol and the "item is due" symbol?
    2) In our company the "due item" if configured as D (today) and the "overdue item" is as D+1 (ie. tomorrow), where can I configure those dates?
    Regards,
    Adriano Cardoso

    Hi
    I don't think you can configure anything to differentiate between Due and overdue. They have a simple English meaning. If an item falls due today based on payment terms, then it is shown "Due" in FBL1n. If the same item is not paid till tomorrow and if you see it tomorrow in FBL1n, it will be shown as "overdue".
    Jayaram

  • Doubt about Rollup Patches and Family Packs

    Hi All,
    What is the difference between Rollup patches and family packs?And also applying family packs will increase the codelvel?Please specify the naming convention of both the pacthes also.
    Thanks
    Rajasekar

    Thanks Kashif M &Hussein for your valuable replies.I've read the links. As per the documennt in r12.
    Product family release update pack (product family RUP)     An aggregation of patches on a given codeline created for all products in specific product family for a specific point release. For example, R12.FIN_PF.A.1.
    Release update pack (RUP)     A cumulative aggregation of product family release update packs on a given codeline created across Oracle E-Business Suite after the initial release. For example, 12.1.1.
    RUP in r12 is similar to family pack(11i) which will change the third digit (12.1.1 to 12.1.2).right?
    Product family release update pack(family pack) with new features called rollup patch?
    (or)
    About rollup patch I read in one apps dba blog
    Rollup patces are usually fixes of all issues popped up because of a particular minipack/familypack or maintenance pack. Lets assume you applied a family pack & because of that some issue/bug came into picture or all bugs reported soon after family pack or maintenance pack are fixed and released as Roll Up patch . These are usually denoted as roll up 1 rollup 2 or roll up A roll up B.
    So you will see maintenance pack 10 (11.5.10) roll up 1 or roll up2.
    How can we identify the roll up level?
    Thanks
    Rajasekar
    Edited by: user9113570 on Jun 5, 2012 8:30 AM

  • Doubt about select performance and keys in Select.

    Hi Gurus.
    I need select data from VBAK with key Vbeln (VBFA has value then i can use your vbelv i think)  then with VBAK-BSTNK and VBAK-KUNNR i goin to select data from KNA1 , only field ADRNR , then i going to ADRC table with field ADRNR  like key, then i could select CITY1, STREET, HOUSE_NUM1, HOUSE_NUM2, CITY2, POST_CODE1 e CITY1.
    1- I know that tables has many data then i need advices for a good performance. suggests is welcome.
    2- If i write any thing wrong please tell me .
    3-If anybody know any key that i don´t write please tell me.
    4-If anybody know other way .suggests is welcome.
    Thanks comunitty for help.

    Hi Ronaldo,
    It seems you have everything you need. You have primary keys for VBAK, KNA1 and ADRC, so the best option in my opinion is one select from vbak inner join KNA1. As fopr ADRC it may be tricy because of the date from / to, so this might be worth going FAE. But test both posibilities before settling for one.  I don't know why you need BSTNK though
    By the way, this I assume you are writing a report? cause if you only need one record at a time I suggest you use BAPIs for customer/address.
    Cheers,
    Custodio

  • SYS, SYSTEM and SYSAUX when full database refresh.

    I took full export from database using below command
    expdp "'/ as sysdba'" full=Y directory=DPUMP_DIR dumpfile=expdp_11032011.dmp logfile=expdp_11032011.log Now, I need to import this file to an other database.
    When do schema refresh we usually drop all the object in that schema and start refresh, but when doing fullback up, do we need to drop all user?
    what about sys, system and sysaux user?

    user3636719 wrote:
    So, the tables in the SYS and SYSTEM will remain same when we refresh?
    Structure will not be modified but contents will be automatically modified when DLL is executed when importing.
    And do we have to drop other user before we import?Applications schemas that you have created should be dropped. In general don't modify any schema that is directly managed by Oracle such as SYS or SYSTEM or any schema used by some database option like Oracle Text, Oracle Spatial, etc.

  • PSU Fan and NB Plug

    I know this has been talked before BUT.. I just got a new Enermax PSU and I have connected the 3 wire fan connector to the NB plug on the mobo.  The concern I have is that the PSU controls the fan speed, but I thought the NB plug ALSO controls the fan.  Is there going to be some sort of conflict?  I have the SMART NB fan temperarture in the BIOS disabled.  Is this correct or can there be a problem?
    Thanks,

    Quote
    Originally posted by Strijker
    Quote
    Originally posted by tazman2
    I know this has been talked before BUT.. I just got a new Enermax PSU and I have connected the 3 wire fan connector to the NB plug on the mobo.  The concern I have is that the PSU controls the fan speed, but I thought the NB plug ALSO controls the fan.  Is there going to be some sort of conflict?  I have the SMART NB fan temperarture in the BIOS disabled.  Is this correct or can there be a problem?
    Thanks,
    what you also could do is place that connector to S-fan1 or something and get an old connector from an old fan and take the two wires on the left and right, rip out the center one, and connect those two ends you ripped out of the old fan and connect them to the corresponding wires on that S-fan1 connector, and plug it in to the NB-fan connection
    This way it'll draw power from the S-fan1 connector, and the speed won't be changed by the board, yet you'll have the speed wires on the NB fan so you can monitor them in corecenter
    Getting to be a bit more work I ma willing to spend time on.  I disconnected the NB connector and zip tied the wire.  I really don't need to monitor that fan since I am not OC'ing.  It was more a "nice to have" than a "need to have".  

  • MSI Z97x Mpower water cooling heatsink

    Hi,
    I will buy Z97x MPower Max AC Motherboard, and I have water cooling system for 1/2" x 3/4" tubing (19/13mm)
    But default mb fitting is 3/8mm.
    Can I remove this fitting and use 19/13mm ?

    No, the fitting can't be removed or changed. Only if an aftermarket adapter is available you could use the water cooling with other tubings.

  • I recently dropped my ipod in water and i placed it into rice for 3 days. Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest

    Then when i try and connect it to the computer it shows the no battery screen with just the lightning bolt. and when i try to restore it the screen flashes then resest to the no battery screen and i get error 1602. Do you know what is wrong with it? do you think its just the battery cause i can replace that for cheap or do you think the circuts are fried?

    No. It sounds like the water destroyed the component inside the iPod.
    About your only choice now it to take it to Apple and pay for a replacement.
    Allan

  • I got my iPhone stolen at a party, the next day my friend gave me back my iPhone 4s and he said that it was jailbroken. Now it will not turn on. When i plug it in to a charger, the apple logo appears for about ten second, then connect to iTunes stays on.

    Hello, i have a question on my iphone 4s. I went to a party a few days ago and it had gotten stolen. The next day my friend said that he had found it and it was jaibroken? The phone was on 1 % when i had recieved it. It then died and i plugged it in to the charger. When i plugged it in the apple logo appeared as if it was starting but, it wasnt. The apple logo appeared for about ten seconds and then the screen went black. After that, the connect to itunes screen popped up and will not go away. So now when i take it off of the charger the screen just stays black and wont turn on? I tried connecting it to itunes and restoring it. But it wont even show my phone any more on the side of itunes. I tried restoring it and an error had occured (2001). I have looked up on youtube how to fix this problem and non of them have helped or worked. Its my only phone and i cant even text my girlfriend which bothers me terribly!! Please help me ASAP!!

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

  • When I connect my iPod to the computer, it connects for only about 5 seconds and then disconnects on its own before synching. How do I fix this?

    I had my iTunes and library on my home computer.  The computer crapped out along with the hard drive.  I have my library on my iPod and want to put it on my new computer, but any time I connect the iPod to my home computer (and work computer for that matter), it only connects for about 5 seconds and then disconnects on its own.  I go to look at the iPod as a hard drive and I have nothing but empty folders (contacts, calendar, recordings and something else), but nothing is in them.
    1) How do I get my iPod to connect to my computer?
    2) How do I get my iPod to connect to iTunes?
    3) Why don't my music files on my iPod show up on my computer?
    I have uninstalled iTunes and reinstalled iTunes.  I have done the "trick" of hitting the 'Menu and Center' buttons at the same time unitl the Apple icon appears.  I have tried going into Disk Mode.  I don't know what to do now.  The word "Resetting" scares me because this is where I have my 150 GB of music stored and I'd rather not have to upload my CD's again.............will resetting affect that?  The word "Restore" is even scarier!!!
    Help!

    i am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
    i use the video app on the iPod and video stored on other aps.

  • My iphone 4 is telling me I have to restore but when I plug in and connect to itunes, it freezes about 30-50 % through the process. Now I can't use my phone at all? I am waiting about 1-3 hours for this process to finish and nothing ever happens. HELP!!

    My iphone 4 is telling me I have to restore but when I plug in and connect to itunes, it freezes about 30-50 % through the process. Now I can't use my phone at all? I am waiting about 1-3 hours for this process to finish and nothing ever happens. HELP!!

    Put it into DFU mode - hold the sleep/wake button and home button until the screen goes black (ignoring the slide to turn off slider). When the screen goes black release the sleep/wake button but hold the home button. Continue holding the home button for 10 seconds, then release it. The screen should stay black. Plug it into iTunes and it should come up with this message "iTunes has detected an iPhone in recovery mode. It must be restored before use", that's when it is successfully in DFU mode. Now press the restore button in iTunes and it should run smoothly :)

Maybe you are looking for

  • How to restore monitor dashboard in lms 4.1

    I seem to have lost all portlets under the monitor dashboard in lms 4.1.  I am not able to add any either.  Is it possible to restore theese portlets in some way ?

  • Assign keywords from excel

    Hi there, I was wondering if anyone might have a suggestion for me: All our product images are named with a 9-digit ID number. All the item numbers and product information (name, color, gender, category, view, etc.) are stored in an Excel workbook fo

  • SAP CRM Workflow , Associate Business Object column is Empty in Worklist WorkCenter

    Hi Frds, I am new to workflow, I have created workflow, it working fine, but Order link is not coming in the Associated BUsiness Obejct colomn in Worklist Workcenter. Through Exsisting workflow we are getting Associated Business Object link but not f

  • Size Measurements in DVDSP

    I would like to confirm I understand correctly what I've read in several other threads regarding size, disk meter, and units of measurement. Is the target size in the Disk Meter measured in Billions of Bytes, hence the max size is 4.7GB? Is the gener

  • Azure connections drop exactly at the same time everyday.

    Hi Guys, I wonder why all my connections to email server and NOC portal gets disconnected at the same time everyday. The connection drops and my retry logic would not get the connection back. However, the connection will be re-established after a whi