Doubt abt T.C OPKI (Confirmation parameter for collective confirmation)

Hello Friend,
In OPKI Transaction,there are by default 3 categories are maintained and for which confirmation parameters are maintained.
Now my question is , what is meant by third category "Confirmation by Order Information System"? I mean for which transaction (confirmation),this parameter is maintained?
I hope you understood by question.
Thanks and Regards,
Jitendra D Chauhan

Confirmation from order info systems:
It refers that in collective entry the work to be confirmed is calculated proportionally to the quantity and is at once proposed on the entry list. and specifies that in the collective entry the quantities still to be confirmed are immediately proposed on the entry list.
Fast data entry:
in the collective entry the quantities still to be confirmed are not proposed and the work still to be confirmed is not proposed..
karthick

Similar Messages

Doubt abt proxies

hi this is seshagiri.
i have doubt abt proxies. when u created ABAP server proxy,objects were generated.
    1. ABAP interface
    2.structure for data type
    3. structure for msg type
WAT IS THE DIFFERENCE BETWEEN DATATYPE STRUCT AND MSG TYPE STRUCT.
AND ONE MORE THING IS PROXIES ARE RUNNING ON WHICH ENGINE

Hi,
To see the deff between DT and MT
A message type comprises a data type that describes the structure of a message
More than one message interface can use the same message type. For example, an asynchronous outbound message interface and an asynchronous inbound message interface can reference the same message type because the request message does not need to be mapped.
·        When defining a message mapping you can directly reference message types to map messages from an outbound interface to messages from a receiver interface.
For technical reasons, a data type is not sufficient to describe the instance of a message. In XML schema, data types are defined as abstract types that are not yet fixed to an element. You can only describe an instance of a message when you have specified a data type as an element type. Therefore, a message type defines the root element of a message.
A message type does not define the direction of the message exchange
Just go thru following links-
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/bfc6373c8fea43bdb3541535bcbd43/frameset.htm
Regards
chilla..

How to Validate or test SJW parameter For HS CAN Node?

Hi All,
To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ?
I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a HS Node I achieved this by disturbing a Transmit message from the ECU at Tq level and confirm the sampling point by observing Stuff ERRORs ( for the HS node chosen, NBT - was 16 Tqs)
However, please share information in case any one had tested/ Validate SJW parameter for a CAN node.
Please also provide information on Bench setup/ Test Steps if any required.
Tq- Time Quanta
BRP -Baud Rate Prescalar
HS-High Speed
NBT - Nominal Bit Time
Thanks,
Gouri

Hi All,
To paraphrase the Question asked in the post, If the CAN parameters for Baud rate, Tq, BRP ,Prop Seg 1, PRop Seg 2 are all programmed with proper Tq. How to test them ?
I have worked on CAN Stress Tool to test Sample point of a CAN Bit for a HS Node I achieved this by disturbing a Transmit message from the ECU at Tq level and confirm the sampling point by observing Stuff ERRORs ( for the HS node chosen, NBT - was 16 Tqs)
However, please share information in case any one had tested/ Validate SJW parameter for a CAN node.
Please also provide information on Bench setup/ Test Steps if any required.
Tq- Time Quanta
BRP -Baud Rate Prescalar
HS-High Speed
NBT - Nominal Bit Time
Thanks,
Gouri

Doubt in pass of connection by parameter

I have a technical doubt about pass of parameters. I have a method to which I pass as parameter a connection with database like 'public void ejecutarSelect (Connection with, String selec)'. The connection comes opened to the method, and it only executes the select. The connection is closed out of the method.
Here my doubt comes. In java all parameter passed to a method is for value, I mean, to the beginning of the method is created a copy of the variables passed by parameter and at the end of the method it destroys them. But in case of the connection, does the method copy the pointer to the connection or really it clon the connection with database? I am interested becuase I want to know if I would be leaving connections open.
Thanks.

Java passes all parameters by value. Parameters hold primitive types and Object references (not Objects). In your case the Object reference is being passed by value but that in effect causes the Object (Connection in your case) to be passed by reference.

How set and get parameter for a session of a portlet (Java)

I would like get parameter and set parameter for a portlet in portal 9.02. This parameter must be availbale during the session of the portal.
With Java Servlet
// I retrieve my session
HttpServletRequest httpreq = (HttpServletRequest)req;
HttpServletResponse httpresp = (HttpServletResponse)resp;
HttpSession session = httpreq.getSession();
//And after i can get or set some parameter for this servlet
//Example
session.setAttribute("MyEmployeeNumber","600000");
String id = (String)session.getAttribute("MyEmployeeNumber");
// But with Portlet in portal, i can't do it.
PortletRenderRequest pr= (PortletRenderRequest)httpreq.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String sUser=pr.getUser().getName();
ProviderSession session=pr.getSession();
// But after if i want get or set a value in this session i have a internal error 500
session.setAttribute("MyEmployeeNumber","600000");
I would like my parameter is avalaible during a session for a user in each page of the portal, because my portlet is on each page.

I have almost the same problem. I tried as you suggested, but it doesn't work yet.
provider.xml
<session>true</session>
<passAllUrlParams>true</passAllUrlParams>
My code in my jsp-portlet is
<%@page contentType="text/html; charset=windows-1252"
import="oracle.portal.provider.v2.render.PortletRenderRequest"
import="oracle.portal.provider.v2.render.PortletRendererUtil"
import="oracle.portal.provider.v2.http.HttpCommonConstants"
import="oracle.portal.provider.v2.ParameterDefinition"
import="oracle.portal.provider.v2.render.http.HttpPortletRendererUtil"
%>
<%@page session="true"%>
<%
PortletRenderRequest pReq = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
String valueSession = (String)pReq.getAttribute("sesion");
if (valueSession != null) {
pReq.setAttribute("session", "value1");
out.println(" (1)valueSession != null");
out.println(" (1)valueSession : " + pReq.getAttribute("session"));
} else {
pReq.setAttribute("session", "value2");
out.println(" (2)valueSession == null");
out.println(" (2)valueSession : " + pReq.getAttribute("session"));
%>
And i always get as result:
(2)valueSession == null
(2)valueSession : value2
Even when i send values (post) at the same page or browsing between tabs:
I check my provider registration and it has the value "once per session"
I have portal 9.0.2.2.14
Thanks

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

One parameter for multiple Crystal reports in Publication

Does anyone know if it is possible to enter one identical parameter for multiple Crystal reports in publication when scheduling? BOE 3.1 SP3 Windows, Java.
To elaborate I am creating publication with multiple reports, each report has one parameter and this parameter is identical in every report in publication. So instead of entering this parameter many times I would like to enter once.
If yes point me in the right direction to get the how to or post the steps.

Daniel,
Thank you so much for your answer. It was very helpful. In the end, it didn't work but it helped me figure out what was happening. I use a different form for the reports and I had it coded in the form which report to use. I created a second form for the second crystal and then I used an if statement to choose the form and it worked like a charm.
Thanks so much again!

How to make a common parameter for two subreports in the main report.

Hi,
I have a crystal report which has 2 subreports in it. Both the subreports have the same code and I need to create a parameter for Project Cost in both the subreports for filtering the data.
When i create the same parameter in both the subreports, i see two parameters with same name on my prompt page while refreshing the report. however I just want 1 parameter on my prompt page and data should get filtered in both the reports.
Can anyone please suggest something, How can I do that? is there a way for sharing same parameter between two subreports?
Thanks!
Neha.

hi Neha,
here's how to do this:
1) create a new parameter with the same name on the main report
2) right click on your first subreport and choose Change Subreport Links
3) in the Field to Link To list drag over your new main report parameter
4) open the Subreport Parameter Field to Use select menu and choose your subreport parameter
5) repeat steps for the 2nd subreport
now you'll only get prompted once.
cheers,
jamie

Problems when creating a new parameter for a parametric role

I'm trying to create a new parameter for a parametric role, but it seems that it is never updated, because the BPM engine does not return any error.
The scenario is: I have a process that has the role "Brands_Admin", the brands are populated by Web Service dynamically, then the parameters of the role would be those brands. In this case, if a new brand is registered (WS returns a new brand), I simply create a new parameter for the role through the "process administrator" of the BPM Enterprise.
I'm trying to create the new parameter as follows:
dirSession = DirectorySession.currentEngineSession;
dirOrganizationalRole = DirOrganizationalRole.fetch(session : dirSession, id : "Brands_Admin");
String[] parametricRoles = dirOrganizationalRole.parametricValues;
parametricRolesCount = parametricRoles.length();
parametricRoles[parametricRolesCount] = "NEW_BRAND";
dirOrganizationalRole.parametricValues = parametricRoles;
dirOrganizationalRole.update();
dirOrganizationalRole.refresh();
for (int i=0; i<dirOrganizationalRole.parametricValues.length(); i++) {
 logMessage(dirOrganizationalRole.parametricValues);
In the code above, the BPM Studio will print the new parameter correctly, but in next activity (like a Screenflow) when I try to get the parameters of that role again, there are only the parameters that were registered using the BPM Studio, the parameters that are created programmatically not appear.
Anyone know the reason?
An user with the same problem: http://forums.tangosol.com/forums/thread.jspa?threadID=839253&tstart=1

When a project that contains this logic to create a new parameter for a parametric role programmatically is deployed in BPM Enterprise, some strange behaviours occurs.
The first is that I cannot see through the process administrator the new parameter that was created for the parametric role.
The second is that if I create this new parameter through process administrator and associate an user to the role that contains the new parameter I cannot access the deployment process. In workspace (authenticated with user that is associated with the role that contains the new parameter) I cannot see anything about the process.

Date Format on OWB 11.1.0.7 to use for input parameter for a mapping

All,
What is the Date Format on OWB 11.1.0.7 to use for passing in an input parameter for a mapping to execute?
I have tried '01-01-2010','01-JAN-2010','01.01.2010', 01/01/2010 and I get the following error:
Error RPE-01003: An infrastructure condition prevented the request from completing.
Error RPE-01038: Failed to evaluate expression declare l_expression DATE := 01/01/2010;begin :result := wb_rt_conversions.from_date(l_expression);end;. Please modify the expression, redeploy and retry again.
RA-06550: line 1, column 32:
PLS-00382: expression is of wrong type
ORA-06550: line 1, column 24:
PL/SQL: Item ignored
ORA-06550: line 1, column 90:
PLS-00320: the declaration of the type of this expression is incomplete or malformed
ORA-06550: line 1, column 51:
PL/SQL: Statement ignored
I am using a Mapping Input parameter object and have a START_DATE_IN as a DATE and an END_DATE_IN as a DATE
Any information you could provide would be greatly appreciated.
Thanks,
Shaun

Hello Shaun,
The function wb_rt_conversions.from_date is (at least in OWB10.2) overloaded and can with input-types as
date, timestamp_unconstrained, timestamp_tz_unconstrained, timestamp_ltz_unconstrained or varchar2.
If it doesn't work with varchar2 I would try Date:
For example: to_date('2010-01-01','YYYY-MM-DD')
I also found this thread:
http://kr.forums.oracle.com/forums/thread.jspa?threadID=608257
Hoping this helps...
Guenther

ABAP for Super Dumps: Import- & Export-Parameter for a Table in a FM

Hello ABAP Profs,
sorry I am BW.
Import- & Export-Parameter for a Table in and out of an Function Modul.
I want to import a table into a Function Module, change it and export it again.
How do I have to define the Import- and Export- Parameters in the FM ?
The table looks looks this:
DATA: zvpshub_tab TYPE SORTED TABLE OF /bic/pzvpshub WITH UNIQUE KEY
/bic/zvpshub objvers /bic/zvpsoursy INITIAL SIZE 0.
Thanks a lot
Martin Sautter

Hi Clemens,
in SE11 I defined a datatype of Type Structure: ZVPSHUB_ROW.
in SE11 I defiend a datatype of Type Tabletype: ZVPSHUB_TAB,
bases on Rowtype ZVPSHUB_ROW.
in SE 80 I creates an FM with a CHANGEING Parameter referencing ZVPSHUB_TAB:
FUNCTION ZVP_SHUB_TAB_LOAD.
""Lokale Schnittstelle:
*" CHANGING
*" VALUE(SHUB_TAB) TYPE ZVPSHUB_TAB
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine i called the FM
CALL FUNCTION 'ZVP_SHUB_TAB_LOAD'
 CHANGING
 shub_tab = shub_tab.
and it works ..
Thank You
Martin Sautter

How to put parameter for object/table ID in BW Web Report

Hi All,
In my BW Web report, i want to get my object TABLE_1 but the code below seems not to work.
var mytable = document.getElementsByTagName("table");
Checking on it, i think IE recognize only document.getElementsByID. ( I tested it by manually creating a table in my template and putting a tag for table ID) But BW does not generate the Object ID in the parameters below, only the name.
 <param name="OWNER" value="SAP_BW"/>
 <param name="CMD" value="GET_ITEM"/>
 <param name="NAME" value="TABLE_1"/>
 <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
 <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
 <param name="GENERATE_CAPTION" value=""/>
 <param name="CAPTION" value="jezel"/>
 <param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
 <param name="BLOCK_SIZE" value="0"/>
 <param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
 ITEM: TABLE_1
do you know how i can add a parameter for object ID? do you know any steps how i can retrieve my table using javascript?
Thanks in advance.

Hi JTi,
what i have understood from your requirement is that you want to access the web item table_1 in javascript, you can get that as below:
Add

tag before your web item and set its id to table.

<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="TABLE_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="GENERATE_CAPTION" value=""/>
<param name="CAPTION" value="jezel"/>
<param name="ONLY_HIERARCHY_NAVIGATION" value="X"/>
<param name="BLOCK_SIZE" value="0"/>
<param name="SHOW_PAGING_AREA_BOTTOM" value=""/>
ITEM: TABLE_1

In javascript access it as :
var mytable = document.getElementsById("table");
Hope this helps
Thanks
Dipika

"No parameter for pDestination or pCalledFrom found in scope." Competence

Hello ,
When i am trying to do the action on an employee in
Competence Superuper -> Comptence Profile -> (Advanced search ) (Action)
Am getting the following error
"No parameter for pDestination or pCalledFrom found in scope."
Could you plz any one help to reslove the issue.
In the same session try to do the same transaction, go the message as "Error on Page"
Error Message as,
Error is copied below:
oracle.apps.fnd.framework.OAException: Could not create Java class: (oracle.apps.per.selfservice.competenceprofile.webui.XXHrCompProfOverviewCO) associated with region: (HrCompOverview). This is probably because the class name is wrong or not included in project.
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.prepareException(OAPageErrorHandler.java:1247)
     at oracle.apps.fnd.framework.webui.OAPageErrorHandler.processErrors(OAPageErrorHandler.java:1435)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2662)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
     at OA.jspService(_OA.java:212)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
## Detail 0 ##
oracle.apps.fnd.framework.OAException: Could not create Java class: (oracle.apps.per.selfservice.competenceprofile.webui.XXHrCompProfOverviewCO) associated with region: (HrCompOverview). This is probably because the class name is wrong or not included in project.
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.getController(OAWebBeanHelper.java:1896)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:572)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
     at OA.jspService(_OA.java:212)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)
oracle.apps.fnd.framework.OAException: Could not create Java class: (oracle.apps.per.selfservice.competenceprofile.webui.XXHrCompProfOverviewCO) associated with region: (HrCompOverview). This is probably because the class name is wrong or not included in project.
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.getController(OAWebBeanHelper.java:1896)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:572)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.layout.OAStackLayoutBean.processRequest(OAStackLayoutBean.java:350)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.OAPageLayoutHelper.processRequest(OAPageLayoutHelper.java:1182)
     at oracle.apps.fnd.framework.webui.beans.layout.OAPageLayoutBean.processRequest(OAPageLayoutBean.java:1569)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.form.OAFormBean.processRequest(OAFormBean.java:385)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:968)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequestChildren(OAWebBeanHelper.java:935)
     at oracle.apps.fnd.framework.webui.OAWebBeanHelper.processRequest(OAWebBeanHelper.java:659)
     at oracle.apps.fnd.framework.webui.OAWebBeanContainerHelper.processRequest(OAWebBeanContainerHelper.java:252)
     at oracle.apps.fnd.framework.webui.beans.OABodyBean.processRequest(OABodyBean.java:353)
     at oracle.apps.fnd.framework.webui.OAPageBean.processRequest(OAPageBean.java:2607)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:1940)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:543)
     at oracle.apps.fnd.framework.webui.OAPageBean.preparePage(OAPageBean.java:431)
     at OA.jspService(_OA.java:212)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
     at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
     at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
     at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
     at com.evermind.server.http.EvermindPageContext.forward(EvermindPageContext.java:395)
     at OA.jspService(_OA.java:221)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:379)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
     at oracle.apps.jtf.base.session.ReleaseResFilter.doFilter(ReleaseResFilter.java:26)
     at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
     at oracle.apps.fnd.security.AppsServletFilter.doFilter(AppsServletFilter.java:318)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:619)

Thanks for advice. Posted in the same.
Regards,
Krishna

How to pass parameter for table name in form6i.

Hi ,
I am facing the problem to pass parameter for table name in form6i.
If any solution please infirm me earliest to my mail id.
([email protected])
example:
begin
select ename into :ename
from :tab_name
where empno =7788;
end;
It gives error as bad bind variable 'tab_name'
*** where :ename and :tab_name are form fields
Thanking you,
Balasaheb

object name not taken as table --> what do u mean by
this?
Please be more clear..
Regards
PriyaI have two block. First block I am displaying all the table using user_objects table. Another block I want display, user which table selected, corresponding table all the records.

SQL Statement as Parameter for Stored Proc

This works fine in SQL script, but doesn't work when converting the script to a sp. It doesn't like how I've defined the @PeriodEndDate parameter. How do I set the variable to the results of a SQL statement?
CREATE PROCEDURE usp_ARAging
-- Add the parameters for the stored procedure here
@FiscalYear int = 2014,
@FiscalPeriod int = 5,
@PeriodEndDate date = (SELECT MAX(JEDate) FROM ERPSQL01.EpicorNamg905.Accounting.Dim_JEDate
WHERE FiscalYear = @FiscalYear
AND FiscalMonth = @FiscalPeriod)
Kirk P.

Let's start over. The default value of a procedure argument is a "suggestion" - a value to be used when it is not provided by the caller. So is your goal to allow the user to supply any date, not just the one that coincides with the
fiscal year and period values? IF not, then it should not be a parameter and the value should be determined by the code inside the stored procedure.
However, if your goal is to allow any value, then you must follow the rules for specifying an appropriate default and those rules are very restrictive. You cannot use a query nor can you refer to other parameters. The typical approach is to use
a "marker" value which the caller uses to indicate that it wants to use the true "default" value which you would then determine inside your stored procedure. Often a value of NULL is used; in your procedure the code checks this parameter
for a null value and, if found, assigns it the value you used in your query above.
And while we're at it, you should code defensively and check that the set of values supplied as parameters are consistent with each other and with the logic that depends on them. For example, presumably the period argument should be between 1 and 12
(and not null). I suggest you reconsider the use of integers since the domain of these values FAR EXCEEDS that allowed for years and months for most business purposes.

Doubt abt T.C OPKI (Confirmation parameter for collective confirmation)

Similar Messages

Maybe you are looking for