Doubt in BDC ( Material master)
Hi frnds,
I am creating BDC for material master.In that BDC if i load the data in 'A' mode its work properly. In 'E' Mode in the last page its asking every time for Save, In 'N' Mode its not upload how to do this.
This is my code :
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
***********CALL TRANSACTION************************
CALL TRANSACTION 'MM01' USING bdcdata MODE 'E'
UPDATE 'A'
MESSAGES INTO it_bdcmsg.
Thanks,
Gowri.
Hi
May be in 'A' mode you are manually hitting the SAVE and saving
The function code/OK code for SAVE is 'BU' like
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
so you have to write this in the last, then it won't ask in E and N modes
may be this is missing in the program see and correct.
Reward points for useful Answers
Regards
Anji
Similar Messages
-
Hi all,
I have a set of data where few materials belong to some views and others belong to other views and sevaral sets like this.
how can i handle them.
is BDC the best solution? or any other ways?
tx,
kiranHi,
Better to use the BAPI BAPI_MATERIAL_SAVEDATA, you need to pass the mandatory fields here, anyways if you use the BDC also you need to pass the mandatory fields, Handiling BDC for MM02 is quite difficult, so better go for BAPI.
if you still wants the BDC for MM02, just with this link ..
http://sap.niraj.tripod.com/id12.html
Regards
Sudheer -
BDC MATERIAL MASTER DATA CONVERSION
HELLO ABAP GURUS,
CAN U PLZ SOLVE MY PROBLEM.
I'M TRING TO CONVERT LEGACY DATA TO SAP FOR TCODE MM01
IN MM01 ALL THE FIELDS I'M ABLE TO ENTER BUT DURING ENTERING DATA OF EAN(IN BASIC DATA 1) SYSTEM SHOWING WARNING MESSAGE TO SKIP THIS WARNING WE HAVE TO PRESS ENTER KEY THEN ONLY IT IS PROCESSING.
MAIN PROBLEM IS THAT I WANT TO GIVE ONE EXTRA ENTER AFTER EXECUTING THE FOLLOWING CODE
perform bdc_dynpro using 'SAPLMGMM' '4004' 'X'.
perform bdc_field using 'BDC_OKCODE' '/00'.
perform bdc_field using 'MAKT-MAKTX' matdesc.
perform bdc_field using 'BDC_CURSOR' 'MARA-MTPOS_MARA'.
perform bdc_field using 'MARA-MEINS' wa_valid-MEINS.
perform bdc_field using 'MARA-MATKL' wa_valid-MATKL.
perform bdc_field using 'MARA-BISMT' wa_valid-BISMT.
perform bdc_field using 'MARA-SPART' wa_valid-SPART.
perform bdc_field using 'MARA-PRDHA' wa_valid-PRDHA.
perform bdc_field using 'MARA-MTPOS_MARA' wa_valid-MTPOS_MARA.
perform bdc_field using 'MARA-BRGEW' wa_valid-BRGEW.
perform bdc_field using 'MARA-GEWEI' wa_valid-GEWEI.
perform bdc_field using 'MARA-NTGEW' wa_valid-NTGEW.
perform bdc_field using 'MARA-VOLUM' wa_valid-VOLUM.
perform bdc_field using 'MARA-VOLEH' wa_valid-VOLEH.
*perform bdc_field using 'MARA-EAN11' wa_valid-EAN11.
perform bdc_field using 'MARA-NUMTP' wa_valid-NUMTP.
AFTER THIS CODE I WANT TO GIVE A CODE TO PRESS ENTER CAN U PLZ TELL ME.
*perform bdc_field using 'BDC_OKCODE' '=ENTR'. THIS CODE IS NOT WORKING
REGARDS,
MANOJ
9248158131MESSAGE IM GETTING
THE EAN WILL BE DETERMINED INTERNALLY ON THE BASIS OF THE EAN CATEGORY
AND ASSIGNING EAN/UPC NO INTERNALLY ON THE BASIS OF EAN CATEGORY -
Error While Uploading Material Master Through Bdc Call Transaction
Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PMSorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MVKE-SKTOF'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARC-PRCTR'
wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARA-IPRKZ'
'D'. -
hi gurus,
i am trying to do a material master creation using BDC recording,
i am new i dont know how to modify the code,
the following is the code, please let me know how to make changes.
report ZTEST95
no standard page heading line-size 255.
include bdcrecx1.
parameters: dataset(132) lower case default
'C:\Documents and Settings\Deskt'
& 'op\test95.txt'.
DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
If it is nessesary to change the data section use the rules:
1.) Each definition of a field exists of two lines
2.) The first line shows exactly the comment
'* data element: ' followed with the data element
which describes the field.
If you don't have a data element use the
comment without a data element name
3.) The second line shows the fieldname of the
structure, the fieldname must consist of
a fieldname and optional the character '_' and
three numbers and the field length in brackets
4.) Each field must be type C.
Generated data section with specific formatting - DO NOT CHANGE ***
data: begin of record,
data element: MATNR
MATNR_001(040),
data element: MBRSH
MBRSH_002(001),
data element: MTART
MTART_003(004),
data element: REF_MATNR
MATNR_004(040),
data element: XFELD
KZSEL_01_005(001),
data element: MAKTX
MAKTX_006(040),
data element: MEINS
MEINS_007(003),
data element: MATKL
MATKL_008(009),
data element: SPART
SPART_009(002),
data element: MTPOS_MARA
MTPOS_MARA_010(004),
data element: BRGEW
BRGEW_011(017),
data element: GEWEI
GEWEI_012(003),
data element: NTGEW
NTGEW_013(017),
end of record.
End generated data section ***
start-of-selection.
perform open_dataset using dataset.
perform open_group.
do.
read dataset dataset into record.
if sy-subrc <> 0. exit. endif.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'RMMG1-MATNR'
record-MATNR_001.
perform bdc_field using 'RMMG1-MBRSH'
record-MBRSH_002.
perform bdc_field using 'RMMG1-MTART'
record-MTART_003.
perform bdc_field using 'RMMG1_REF-MATNR'
record-MATNR_004.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
record-KZSEL_01_005.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'MAKT-MAKTX'
record-MAKTX_006.
perform bdc_field using 'MARA-MEINS'
record-MEINS_007.
perform bdc_field using 'MARA-MATKL'
record-MATKL_008.
perform bdc_field using 'MARA-SPART'
record-SPART_009.
perform bdc_field using 'MARA-MTPOS_MARA'
record-MTPOS_MARA_010.
perform bdc_field using 'BDC_CURSOR'
'MARA-BRGEW'.
perform bdc_field using 'MARA-BRGEW'
record-BRGEW_011.
perform bdc_field using 'MARA-GEWEI'
record-GEWEI_012.
perform bdc_field using 'MARA-NTGEW'
record-NTGEW_013.
perform bdc_dynpro using 'SAPLSPO1' '0300'.
perform bdc_field using 'BDC_OKCODE'
'=YES'.
perform bdc_transaction using 'MM01'.
enddo.
perform close_group.
perform close_dataset using dataset.
thanks.Hi,
It is better if the Material Master creation step is done by LSMW - Direct Input method with the following object:
Object 0020 Material master
Method 0000
Program name RMDATIND
Program type D Direct input
Check the program documentation for more details.
For a sample data file generation ( Sequential file ), check the program RMDATGEN
If the reqmt., is for a repetetive loading of Material Master you could schedule / execute the LSMW by following program: /SAPDMC/SAP_LSMW_INTERFACE.
Hope this helps.
Best Regards, Murugesh -
Object ID for PO long text for BDC of material master
Hi all,
we are working on BDC of material master:
I have given some technical specifications in the P O text view of Material Master, i want to assign an object id for this long text , how to assign an object id for the long text?
regards,
urendraHi
thanku for quick response,,, i had checked the textid,
my problem was resolved, i have awarded some points
thank u
regards,
urendra -
Problem in bdc of material master
Dear all,
I have made BDC for material master . In selection option i selected Quality management view, i completed the recording. while running the prgm its not selecting the qm view fields, so here i cannt upload the record for qm view only, I tried in LSMW also.plz give some solution.
Point will be sure,
gowrihi,
I Hope u r using MM02
The view no will differ according to the material created.
use bapi,
please chk the below link
BAPI_MATERIAL_SAVEDATA - QM - Inspection Setup
regards,
Prabhu
reward if it is helpful. -
Hi regarding material master and vendor master (mm01,xk01) upload using BDC
hi can any one tell me how to upload material maste and vendor master using BDC.
will the views capture by shdb when i use recording.Hey i suggest you to go to LSMW direct input program method. That's the best option.
Material Master:
Object 0020 Material master
Method 0000
Program Name RMDATIND
Program Type D Direct Input
Vendor Master:
Object 0040 Vendor master
Method 0001 Standard
Program Name RFBIKR00
Program Type B Batch Input -
Problem in BDC for Material master Change
Hi,
I have made a BDC to change the material master, I have done the recording with SHDB I want to do changes in Sales data and MRP data, when I do the recording I have selected views and it was 4 , 11 AND 12 VIEW IN select vie option but in some material Classifcation view is maitain and it is coming at 2nd position and my selected views are shiftin by one position due to this BDC is giving error Screen contain no filed -
I sthere any way that I acn directly select the Three views as Sales data , MRP1 and MRP2, because when we do the recording it is not showing the name it is showing as
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(12)'.
perform bdc_field using 'BDC_OKCODE'
'=DEF_SAVE'.
perform bdc_field using 'MSICHTAUSW-KZSEL(04)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(11)'
'X'.
perform bdc_field using 'MSICHTAUSW-KZSEL(12)'
'X'.
regards,
zafarHi,
Myproblem is solve , in the table MARA i found the filed VPSTA : Maitenance status, Having the vakue may KVEDLBZX those value is diffrent for different material this value indicates
User department Maintenance status
Work scheduling A
Accounting B
Classification C
MRP D
Purchasing E
Production resources/tools F
Costing G
Basic data K
Storage L
Forecasting P
Quality management Q
Warehouse management S
Sales V
Plant stocks X
Storage location stocks Z,
after reading what fields are maitain according to that i have selected the proper views and my problem is solve.
regards,
zafar -
Hi,
I have to write a BDC for t-code MM02. I have to chnage "X-distr.chain status" field in SalesOrg 1 view.
The problem i m facing here is that the positon of SalesOrg 1 view keeps changing for material to material.
Have somebody craeted the bdc for MM02 then please help me in this. Its a bit urgent.
Regards,-
Sachin.Sachin,
Try these techniques instead of BDC.
1)
<b>BAPI_RETAILMATERIAL_CREATE
BAPI_STANDARDMATERIAL_CREATE
BAPI_MATERIAL_MAINTAINDATA_RT
BAPI_MATERIAL_SAVEDATA</b>
In LSMW BAPI technique using Business objects BUS1001006 , BUS1001001 can be done
2) BDC in LSMW
3) Direct input method in LSMW Using Material Master 0020
rgds,
TM -
Hi all,
I am very much confused in what to fill in few fields of material master.
Please let me know in case of ROH, HALB and FERT material masters, what to fill in :
1._In house production days_?(My doubt here is in house production days will be suppose 2 days for 2 quantities and 1 day for 1 quantity.So do i need to give 1 day or 2 days for in house production days?
Next doubt: If my in house production days are 2 hours for 1 quantity( for example I am in HALB or FERT material master), how will i put 2 hours? that field only takes in terms of days! I cant put decimals.Do i need to go to in work scheduling view and at bottom I need to give base quantity as 48 if I have given 2hours in inhouse production days??
2.setup, teardown, processing, and interoperation times, base quantity in work scheduling view
My doubt here is for HALB and FERT anyhow I am giving time in routings, why to give it here also? more over base quantity is given with what reference? is it like setup, teardown, processing, and interoperation times are given total for base quantity 20 quantity( for example)?
3.Replenishment lead time: what data to give here? what will happen if I do not give anything? what will happen if I have given GR processing and planned delivery time also and the addition of these two is not equal to replenishment lead time?(is it related to replenishment lead time in any way??
Please reply in all 3 cases: ROH, HALB, FERT
I am into implementation and my client is asking me daily and I am very much confused.
Regards,
Mohammad Arif.Hi,
Setup, inter opn, teardown
Yes the base qty specified here should be the common base qty for all the above
The Lead time data maintained in Material master is considered if you choose "Basic scheduling" in scheduling field during MRP run (check MD02)
If you choose " Lead time scheduling" in that field then the data in routing is considered
In house prodn time:
In-house production time is independent of the order quantity.
The system requires the in-house production time to determine the planned dates for planned orders in materials planning (If you choose basic scheduling).
If you want it to be on basis of lot size... then specify you enter the setup, teardown, processing, and interoperation times. If you maintain these values, the system determines the in-house production time on the basis of lot size.
Total Replenishment lead time
Total replenishment lead time (in workdays)
The total replenishment lead time is the time needed before the product is completely available again, that is, after all BOM levels have been procured or produced. It is not calculated by the system, but defined in this field as the total of the in-house production time(s) and/or the planned delivery time(s) of the longest production path.
This time is necessary if, for materials produced in-house, the replenishment lead time is to be taken into consideration in the availability check.
In an availability check where the system takes the replenishment lead time into consideration, it only checks whether there are sufficient incoming quantities and stocks available to cover the requirements within the replenishment lead time. Outside the replenishment lead time,the system assumes that the material is available in sufficient quantity.
Therefore, in this situation, it is usually necessary to depict the product's total replenishment lead time with all BOM levels as the replenishment lead time.
Use
The following options exist for materials produced in-house if the replenishment lead time is included in the availability check:
The Total replenishment lead time field is maintained.
In this case, the time maintained in this field is used for the availability check.
The Total replenishment lead time field is not maintained.
In this case, the system reads the in-house production time and, if available, the goods receipt processing time, and interprets the total of these two times as the replenishment lead time for the availability check.
Note
There is no point in maintaining the Total replenishment lead time field for materials procured externally. In external procurement, the system adds the processing time from purchasing, the planned delivery time, and the goods receipt processing time and uses this total as the replenishment lead time for an availability check with replenishment lead time.
Regards,
Ashok -
Hi ,
I am developing the BI program for Material Master (MM01) and change MM02(Both create and change).
Can you let me know how do i select particular views before creating/changing the material .
Is there any specific function module available to do this ..
If you help me with any sample coding ,that would be great.
Thanks
Raj& Description : This program is used to create material
*& master (tcode MM01) . Material data is available in tab delimited *
*& flat file. *
*& The Following is the flat file Structure: *
MATNR(018) "Material Number
MBRSH(001) "Industry Sectory
MTART(004) "Material Type
WERKS(004) "Plant
LGORT(004) "Storage Location
MAKTX(040) "Material Text
MEINS(003) "Basic Unit of Measurement
MATKL(009) "Material Group
PRDHA(018), "Product Hierarchy
MTPOS_MARA(004), "General Item Categoy Group
ZEINR(022) "Document
ZEIVR(002) "Doc Version
SPART(002) "Division
DWERK(004) "Delivery Plant
TAXKM(001) "Tax
KTGRM(002) "Account Assignemnt Group
MTPOS_MARA(004), "General. Item Category Group
MTPOS(004), "Item Category Group
MTVFP(002) "Availability check
*/ Begin of changes by Anoop for Sales Text Date: 17 feb 2004
s_ltex1(40), "Sales Text line 1
s_ltex2(40), "Sales Text line 2
s_ltex3(40), "Sales Text line 3
s_ltex4(40), "Sales Text line 4
s_ltex5(40), "Sales Text line 5
s_ltex6(40), "Sales Text line 6
**/ End of changes by Anoop for Sales Text Date: 17 feb 2004
**/ Begin of changes by Anoop for Purchase Order Text Date: 17 feb 2004
po_ltex1(40), "Purchase Order Text line 1
po_ltex2(40), "Purchase Order Text line 2
po_ltex3(40), "Purchase Order Text line 3
po_ltex4(40), "Purchase Order Text line 4
po_ltex5(40), "Purchase Order Text line 5
po_ltex6(40), "Purchase Order Text line 6
MAKTX(040) "Sales text
EKGRP(003) "Purchasing Group
DISMM(002) "MRP Type
DISPO(003) "MRP Controller
DISLS(002) "Lot Size
EKGRP(003) "Purchasing group
BSTFE(017) "Fixed Lot Size
BESKZ(001) "Procurement Type
LGPRO(004) "Prod. Storage Location
DZEIT(003) "In house production
PLIFZ(003) "Planned Delivery Time
FHORI(003) "Sch. Margin Key
STRGR(002) "Planning Strategy Group
MTVFP(002) "Availabilty Check
SBDKZ(001) "Ind/Collective
SERNP(004) "Serial Number Profile
LGPBE(010) "Storage Bin
GROES(032) "Size and Dimension
WEBAZ(003) "GR Processing Time
BKLAS(004) "Valuation Class
VPRSV(001) "Price Control
VERPR(015) "Moving Average Price
STPRS(015) "Standard Price
MYPOL(004) "LIFO Pool
EKALR(001) "With Qty structure
HKMAT(001) "Material Origin
ZPLP1(014) "Planned Price 1
ZPLD1(010) "Planned Price Date 1
*Include
INCLUDE bdcrecx1.
*Variables
DATA : v_filename TYPE string,
v_flag(1) TYPE c,
v_counter(2) TYPE c,
v_lines TYPE i,
v_count TYPE i VALUE 0.
*Selection-screen
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
PARAMETER : filename LIKE rlgrap-filename OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN BEGIN OF BLOCK blk2 WITH FRAME TITLE text-002.
PARAMETER : v_basic1 TYPE checkbox,
v_basic2 TYPE checkbox,
v_sales1 TYPE checkbox,
v_sales2 TYPE checkbox,
v_salesg TYPE checkbox,
v_salest TYPE checkbox,
v_purcha TYPE checkbox,
Begin of changes by Anoop Date: 18 feb 2004.
v_potext TYPE checkbox,
*End of changes by Anoop Date: 18 feb 2004
v_mrp1 TYPE checkbox,
v_mrp2 TYPE checkbox,
v_mrp3 TYPE checkbox,
v_mrp4 TYPE checkbox,
v_wrksch TYPE checkbox,
v_gplnt1 TYPE checkbox,
v_gplnt2 TYPE checkbox,
v_qality TYPE checkbox,
v_acct1 TYPE checkbox,
v_acct2 TYPE checkbox,
v_testi TYPE checkbox,
v_cost2 TYPE checkbox.
SELECTION-SCREEN END OF BLOCK blk2.
SELECTION-SCREEN END OF BLOCK blk1.
*/ Comments given are the view names that have been incorporated into
the BDC for the transaction MM01.
**Internal Tables
DATA: BEGIN OF record,
*/ Basic Data 1..
data element: MATNR
matnr_001(018), "Material Number
data element: MBRSH
mbrsh_002(001), "Industry Sectory
data element: MTART
mtart_003(004), "Material Type
data element: WERKS_D
werks_019(004), "Plant
data element: LGORT_D
lgort_020(004), "Storage Location
*DATA ELEMENT : vkorg
vkorg(004), "Sales Organisation
*DATA ELEMENT : VTWEG
vtweg(002), "Distribution channel
data element: MAKTX
maktx_021(040), "Material Text
data element: MEINS
meins_022(003), "Basic Unit of Measurement
data element: MATKL
matkl_023(009), "Material Group
data element: PRODH_D
prdha_015(018),
data element: MTPOS_MARA
mtpos_mara_016(004),
data element: MTPOS_MARA
MTPOS_MARA_024(004),
*/ Basic Data 2...
data element: DZEINR
zeinr_026(022), "Document
data element: DZEIVR
zeivr_027(002), "Doc Version
data element: MEINS
MEINS_029(003),
*/ Sales : Sales Org. Data 1
data element: SPART
spart_020(002),
data element: DWERK_EXT
dwerk_021(004),
data element: TAXKM
taxkm_01_024(001),
*/ Sales : Sales Org. Data 2
data element: KTGRM
ktgrm_033(002),
data element: MTPOS_MARA
mtpos_mara_034(004),
data element: MTPOS
mtpos_035(004),
*/ Sales : General Plant/Data
data element: MTVFP
mtvfp_040(002),
data element: PRCTR
prctr_041(007),
*/ Sales Text
*/commented by Anoop
data element: MAKTX
maktx_041(040),
*/commented up to here by Anoop
*/ Begin of changes by Anoop for Sales Text Date: 17 feb 2004
s_ltex1(40),
s_ltex2(40),
s_ltex3(40),
s_ltex4(40),
s_ltex5(40),
s_ltex6(40),
*/ End of changes by Anoop for Sales Text Date: 17 feb 2004
*/ Purchasing..
data element: EKGRP
ekgrp_030(003),
data element: MEINS
MEINS_033(003),
data element: EKGRP
EKGRP_034(003),
*/ Begin of changes by Anoop for Purchase Order Text Date: 17 feb 2004
*/ Purchase Order Text
po_ltex1(40),
po_ltex2(40),
po_ltex3(40),
po_ltex4(40),
po_ltex5(40),
po_ltex6(40),
*/ MRP1..
data element: DISMM
dismm_035(002), "MRP Type
data element: DISPO
dispo_036(003), "MRP Controller
data element: DISLS
disls_037(002), "Lot Size
data element : EKGRP
ekgrp(003),
data element: MEINS
MEINS_039(003),
data element: EKGRP
EKGRP_040(003),
data element: DISMM
DISMM_041(002),
data element: DISPO
DISPO_042(003),
data element: DISLS
DISLS_043(002), "Proc. Type
data element: BSTFE
bstfe_044(017),
*/ MRP2..
data element: BESKZ
beskz_046(001),
data element: LGPRO
lgpro_047(004),
data element: DZEIT
dzeit_048(003),
data element: PLIFZ
plifz_049(003),
data element: FHORI
fhori_050(003),
data element: PERKZ
PERKZ_052(001),
*/ MRP3..
data element: STRGR
strgr_053(002),
data element: MTVFP
mtvfp_054(002),
*/ MRP4
data element: SBDKZ
sbdkz_056(001),
data element: MEINS
MEINS_058(003),
data element: LGPRO
LGPRO_059(004),
*/ Work Scheduling
data element: SERAIL
sernp_060(004),
data element: DZEIT
DZEIT_061(003),
data element: MEINS
MEINS_063(003),
*/ Plant Data/Str1
data element: LGPBE
lgpbe_064(010),
data element: DATTP
IPRKZ_065(001),
*/ Plant Data/Str2
data element: GROES
groes_067(032),
data element: SERAIL
SERNP_068(004),
data element: MEINS
MEINS_070(003),
*/ Quality Management
data element: WEBAZ
webaz_071(003),
data element: MEINS
MEINS_073(003),
*/ Accounting 1
data element: BKLAS
bklas_074(004),
data element: VPRSV
vprsv_075(001),
data element: PEINH
PEINH_076(006),
data element: VERPR
verpr_077(015),
data element: STPRS
stprs_078(015),
*/ Accounting 2
data element: MYPOOL
mypol_080(004),
data element: MEINS
MEINS_082(003),
*/ Cost Estimate 1.
data element: CK_EKALREL
ekalr_083(001),
data element: HKMAT
hkmat_084(001),
data element: CK_LOSGR
LOSGR_085(017),
*/ Costing 2..
data element: DZPLP1
zplp1_087(014),
data element: DZPLD1
zpld1_088(010),
data element: BKLAS
BKLAS_089(004),
data element: VPRSV
VPRSV_090(001),
data element: PEINH
PEINH_091(006),
data element: VERPR
VERPR_092(015),
data element: STPRS
STPRS_093(015),
END OF record.
*/ Begin of changes by Anoop Date: 17 feb 2004
*/ intermediate internal table for Sales Text and Purchase Order Text
*DATA: BEGIN OF s_tab OCCURS 0,
matnr LIKE mara-matnr,
s_ltex1 LIKE makt-maktx,
s_ltex2 LIKE makt-maktx,
s_ltex3 LIKE makt-maktx,
s_ltex4 LIKE makt-maktx,
s_ltex5 LIKE makt-maktx,
s_ltex6 LIKE makt-maktx,
END OF s_tab.
*DATA: BEGIN OF po_tab OCCURS 0,
matnr LIKE mara-matnr,
po_ltex1 LIKE makt-maktx,
po_ltex2 LIKE makt-maktx,
po_ltex3 LIKE makt-maktx,
po_ltex4 LIKE makt-maktx,
po_ltex5 LIKE makt-maktx,
po_ltex6 LIKE makt-maktx,
END OF po_tab.
*/ End of changes by Anoop Date: 17 feb 2004
DATA : itab LIKE record OCCURS 0 WITH HEADER LINE.
DATA : ok_code(5) TYPE c.
*AT SELECTION-SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR filename.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
field_name = filename
CHANGING
file_name = filename.
*START-OF-SELECTION
START-OF-SELECTION.
v_filename = filename.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = v_filename
filetype = 'ASC'
has_field_separator = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab.
*/ Begin of changes by Anoop Date: 17 feb 2004
LOOP AT itab.
move itab-s_ltext+0(40) to itab-s_ltex1.
move itab-s_ltext+40(40) to itab-s_ltex2.
move itab-s_ltext+80(40) to itab-s_ltex3.
move itab-s_ltext+120(40) to itab-s_ltex4.
move itab-s_ltext+160(40) to itab-s_ltex5.
move itab-s_ltext+200(40) to itab-s_ltex6.
move itab-po_ltext+0(40) to itab-po_ltex1.
move itab-po_ltext+40(40) to itab-po_ltex2.
move itab-po_ltext+80(40) to itab-po_ltex3.
move itab-po_ltext+120(40) to itab-po_ltex4.
move itab-po_ltext+160(40) to itab-po_ltex5.
move itab-po_ltext+200(40) to itab-po_ltex6.
modify itab.
ENDLOOP.
*/ End of changes by Anoop Date: 17 feb 2004
DELETE itab WHERE matnr_001 = ' '.
DESCRIBE TABLE itab LINES v_lines.
PERFORM open_group.
LOOP AT itab.
v_count = v_count + 1.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0060'.
IF v_count = v_lines.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BACK'.
ENDIF.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMMG1-MATNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RMMG1-MATNR'
itab-matnr_001.
PERFORM bdc_field USING 'RMMG1-MBRSH'
itab-mbrsh_002.
PERFORM bdc_field USING 'RMMG1-MTART'
itab-mtart_003.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0070'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(17)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=P+'.
TRANSLATE itab-mtart_003 TO UPPER CASE.
*/ IF the data to be uploaded is of Material type 'Trading Goods'
the following view selection
IF itab-mtart_003 = 'HAWA'.
PERFORM view_sel3.
ENDIF.
*/ IF the data to be uploaded is of Material type 'Finished Goods'
the following view selection
IF itab-mtart_003 = 'FERT'.
PERFORM view_sel1.
ENDIF.
*/ IF the data to be uploaded is of Material type 'Semi-Finished Goods'
the following view selection
IF itab-mtart_003 = 'HALB'.
PERFORM view_sel2.
ENDIF.
PERFORM bdc_dynpro USING 'SAPLMGMM' '0080'.
PERFORM bdc_field USING 'BDC_CURSOR'
'T001L-LGOBE'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTR'.
PERFORM bdc_field USING 'RMMG1-WERKS'
itab-werks_019.
PERFORM bdc_field USING 'RMMG1-LGORT'
itab-lgort_020.
PERFORM bdc_field USING 'RMMG1-VKORG'
itab-vkorg.
PERFORM bdc_field USING 'RMMG1-VTWEG'
itab-vtweg.
PERFORM bdc_dynpro USING 'SAPLMGMM' '4004'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
IF v_basic1 = 'X'.
*/ Basic Data 1
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARA-MATKL'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARA-MATKL'
itab-matkl_023.
PERFORM bdc_field USING 'MARA-PRDHA'
itab-prdha_015.
PERFORM bdc_field USING 'MARA-MTPOS_MARA'
itab-mtpos_mara_016.
perform bdc_field using 'MARA-MTPOS_MARA'
itab-MTPOS_MARA_024.
ENDIF.
IF v_basic2 = 'X'.
*/ Basic Data 2
PERFORM bdc_dynpro USING 'SAPLMGMM' '4004'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARA-ZEIVR'.
PERFORM bdc_field USING 'MARA-ZEINR'
itab-zeinr_026.
PERFORM bdc_field USING 'MARA-ZEIVR'
itab-zeivr_027.
ENDIF.
IF itab-vkorg(004) <> ' '.
IF v_sales1 = 'X'.
*/ Sales : Sales Org. Data 1
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARA-SPART'
itab-spart_020.
PERFORM bdc_field USING 'MVKE-DWERK'
itab-dwerk_021.
PERFORM bdc_field USING 'MARA-MATKL'
itab-matkl_023.
****perform bdc_field using 'MVKE-SKTOF'
record-SKTOF_023.
IF itab-taxkm_01_024 <> ' '.
PERFORM bdc_field USING 'BDC_CURSOR'
'MG03STEUER-TAXKM(01)'.
PERFORM bdc_field USING 'MG03STEUER-TAXKM(01)'
itab-taxkm_01_024.
*/ After entering tax another screen in which no data has to be *
populated
PERFORM bdc_dynpro USING 'SAPLMGMM' '4200'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_CURSOR'
'MAKT-MAKTX'.
PERFORM bdc_field USING 'MAKT-MAKTX'
record-maktx_021.
ENDIF.
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARA-SPART'
itab-spart_020.
PERFORM bdc_field USING 'MVKE-DWERK'
itab-dwerk_021.
PERFORM bdc_field USING 'MARA-MATKL'
itab-matkl_023.
ENDIF.
IF v_sales2 = 'X'.
*/ Sales : Sales Org. Data 2
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
*/commented by Anoop
*/ itab-maktx_041.
*/commented up to here by Anoop
*/ Begin of changes by Anoop Date: 17 feb 2004
itab-maktx_021.
*/ End of changes by Anoop Date: 17 feb 2004
PERFORM bdc_field USING 'BDC_CURSOR'
'MVKE-MTPOS'.
PERFORM bdc_field USING 'MVKE-KTGRM'
itab-ktgrm_033.
IF itab-mtpos_mara_034 <> ' '.
PERFORM bdc_field USING 'MARA-MTPOS_MARA'
itab-mtpos_mara_034.
ENDIF.
IF itab-mtpos_035 <> ' '.
PERFORM bdc_field USING 'MVKE-MTPOS'
itab-mtpos_035.
ENDIF.
ENDIF.
IF v_salesg = 'X'.
*/ Sales : General/Plant Data
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-MTVFP'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
***perform bdc_field using 'MARA-GEWEI'
record-GEWEI_039.
PERFORM bdc_field USING 'MARC-MTVFP'
itab-mtvfp_040.
IF itab-prctr_041 <> ' '.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-PRCTR'.
PERFORM bdc_field USING 'MARC-PRCTR'
itab-prctr_041.
ENDIF.
ENDIF.
IF v_salest = 'X'.
*/ Sales Text
PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
IF itab-mtart_003 = 'HAWA' OR itab-mtart_003 = 'HALB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SP09'.
ok_code = '=SP09'.
ELSEIF itab-mtart_003 = 'FERT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SP12'.
ok_code = '=SP12'.
ENDIF.
*/commented by Anoop
PERFORM bdc_field USING 'MAKT-MAKTX'
*/ itab-maktx_041.
*/commented up to here by Anoop
*/ Begin of changes by Anoop for Sales Text Date: 17 feb 2004
PERFORM bdc_field USING 'BDC_OKCODE' '=LTEX'.
PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXLINE(02)' .
PERFORM bdc_field USING 'BDC_OKCODE' '=TXBA' .
PERFORM bdc_field USING 'RSTXT-TXLINE(02)' itab-s_ltex1.
perform bdc_field using 'RSTXT-TXLINE(03)' itab-s_ltex2.
perform bdc_field using 'RSTXT-TXLINE(04)' itab-s_ltex3.
perform bdc_field using 'RSTXT-TXLINE(05)' itab-s_ltex4.
perform bdc_field using 'RSTXT-TXLINE(06)' itab-s_ltex5.
perform bdc_field using 'RSTXT-TXLINE(07)' itab-s_ltex6.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE' '=YES' .
*/ End of changes by Anoop for Sales Text Date: 17 feb 2004
PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
ENDIF.
ENDIF.
IF v_purcha = 'X' AND ok_code = '=SP09'.
CLEAR ok_code.
*/ Purchasing
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'SP11'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-EKGRP'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARC-EKGRP'
itab-ekgrp_030.
PERFORM bdc_field USING 'MARA-MATKL'
itab-matkl_023.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'BDC_OKCODE'
'ENTR'.
perform bdc_field using 'MAKT-MAKTX'
itab-maktx_021.
perform bdc_field using 'MARA-MEINS'
itab-meins_022.
perform bdc_field using 'MARC-EKGRP'
itab-ekgrp_030.
perform bdc_field using 'BDC_CURSOR'
'MARC-DISMM'.
perform bdc_field using 'MARC-DISMM'
itab-DISMM_035.
perform bdc_field using 'MARC-DISPO'
itab-DISPO_036.
perform bdc_field using 'MARC-DISLS'
itab-DISLS_037.
ENDIF.
*/ Begin of changes by Anoop for Purchase Order Text Date: 18 feb 2004
PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
IF v_potext = 'X' .
CLEAR ok_code.
*Purchase Order Text
PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
PERFORM bdc_field USING 'BDC_OKCODE' '=LTEX'.
PERFORM bdc_dynpro USING 'SAPLSTXX' '1100'.
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXLINE(02)' .
PERFORM bdc_field USING 'BDC_OKCODE' '=TXBA' .
PERFORM bdc_field USING 'RSTXT-TXLINE(02)' itab-po_ltex1.
perform bdc_field using 'RSTXT-TXLINE(03)' itab-po_ltex2.
perform bdc_field using 'RSTXT-TXLINE(04)' itab-po_ltex3.
perform bdc_field using 'RSTXT-TXLINE(05)' itab-po_ltex4.
perform bdc_field using 'RSTXT-TXLINE(06)' itab-po_ltex5.
perform bdc_field using 'RSTXT-TXLINE(07)' itab-po_ltex6.
PERFORM bdc_field USING 'RSTXT-TXLINE(02)' itab-po_ltex1 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(03)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(03)' '*'.
PERFORM bdc_field USING 'RSTXT-TXLINE(03)' itab-po_ltex2 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(04)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(04)' '*'.
PERFORM bdc_field USING 'RSTXT-TXLINE(04)' itab-po_ltex3 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(05)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(05)' '*'.
PERFORM bdc_field USING 'RSTXT-TXLINE(05)' itab-po_ltex4 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(06)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(06)' '*'.
PERFORM bdc_field USING 'RSTXT-TXLINE(06)' itab-po_ltex5 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(07)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(07)' '*'.
PERFORM bdc_field USING 'RSTXT-TXLINE(07)' itab-po_ltex6 .
PERFORM bdc_field USING 'BDC_CURSOR' 'RSTXT-TXPARGRAPH(08)'.
PERFORM bdc_field USING 'RSTXT-TXPARGRAPH(08)' '*'.
PERFORM bdc_dynpro USING 'SAPLSPO1' '0100'.
PERFORM bdc_field USING 'BDC_OKCODE' '=YES' .
PERFORM bdc_dynpro USING 'SAPLMGMM' '4040'.
PERFORM bdc_field USING 'BDC_OKCODE' '/00'.
endif.
*/ End of changes by Anoop for Purchase Order Text Date: 18 feb 2004
IF v_mrp1 = 'X'.
*/ MRP 1
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'ENTR'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARC-EKGRP'
itab-ekgrp_030.
PERFORM bdc_field USING 'MARC-DISMM'
itab-dismm_035.
PERFORM bdc_field USING 'MARC-DISPO'
itab-dispo_036.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-DISLS'.
PERFORM bdc_field USING 'MARC-DISLS'
itab-disls_037.
IF itab-ekgrp <> ' '.
PERFORM bdc_field USING 'MARC-EKGRP'
itab-ekgrp.
ENDIF.
PERFORM bdc_field USING 'MARC-BSTFE'
itab-bstfe_044.
ENDIF.
IF v_mrp2 = 'X'.
*/ MRP 2
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'MARC-BESKZ'
itab-beskz_046.
PERFORM bdc_field USING 'MARC-LGPRO'
itab-lgpro_047.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-DZEIT'.
PERFORM bdc_field USING 'MARC-DZEIT'
itab-dzeit_048.
PERFORM bdc_field USING 'MARC-PLIFZ'
itab-plifz_049.
PERFORM bdc_field USING 'MARC-FHORI'
itab-fhori_050.
ENDIF.
IF v_mrp3 = 'X'.
*/ MRP 3
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
perform bdc_field using 'MARC-PERKZ'
itab-PERKZ_052.
PERFORM bdc_field USING 'MARC-STRGR'
itab-strgr_053.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-MTVFP'.
PERFORM bdc_field USING 'MARC-MTVFP'
itab-mtvfp_054.
ENDIF.
IF v_mrp4 = 'X'.
*/ MRP 4
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-SBDKZ'.
PERFORM bdc_field USING 'MARC-SBDKZ'
itab-sbdkz_056.
ENDIF.
IF v_wrksch = 'X'.
*/ WORK SCHEDULES
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-SERNP'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARC-LGPRO'
itab-lgpro_047.
PERFORM bdc_field USING 'MARC-SERNP'
itab-sernp_060.
PERFORM bdc_field USING 'MARC-DZEIT'
itab-dzeit_048.
ENDIF.
IF v_gplnt1 = 'X'.
*/ PLANT DATA/STR1
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARD-LGPBE'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARD-LGPBE'
itab-lgpbe_064.
perform bdc_field using 'MARA-IPRKZ'
itab-IPRKZ_065.
ENDIF.
IF v_gplnt2 = 'X'.
*/ PLANT DATA/STR2
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARA-GROES'.
PERFORM bdc_field USING 'MARA-GROES'
itab-groes_067.
PERFORM bdc_field USING 'MARC-SERNP'
itab-sernp_060.
ENDIF.
IF v_qality = 'X'.
*/ QUALITY MANAGEMENT
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=PB01'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-WEBAZ'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARC-WEBAZ'
itab-webaz_071.
Addition done by Hymavathi on 24-01-2005
PERFORM bdc_dynpro USING 'SAPLQPLS' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMQAM-ARGUMENT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=NEU'.
PERFORM bdc_dynpro USING 'SAPLQPLS' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RMQAM-AKTIV(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=WEIT'.
PERFORM bdc_field USING 'RMQAM-ART(01)'
'01'.
PERFORM bdc_field USING 'RMQAM-AKTIV(01)'
'X'.
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'BDC_CURSOR'
'MARC-WEBAZ'.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'MARC-WEBAZ'
itab-webaz_071.
End Of Addition Done By Hymavathi
ENDIF.
IF v_acct1 = 'X'.
*/ ACCOUNTING 1
PERFORM bdc_dynpro USING 'SAPLMGMM' '4000'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'MAKT-MAKTX'
itab-maktx_021.
PERFORM bdc_field USING 'MARA-MEINS'
itab-meins_022.
PERFORM bdc_field USING 'BDC_CURSOR'
'MBEW-STPRS'.
PERFORM bdc_field USING 'MBEW-BKLAS'
itab-bklas_074.
PERFORM bdc_field USING 'MBEW-VPRSV'
-
hi,
i want to upload updation & deletetion of unit of measurment in material master through BDC.
after that client require repot for that , how many are updated or deleted,
clent is asking Transactin code also.
which T code i will suggest and which t code BDC is doing???
thanks
rajHi
Use se38 to run the BDC program for Txn code MM02 for your UOM changes
use Txn codoe SM35 for the details. You can use the Log to know how many records changes has been carried out.
Regards
Edited by: samuel mendis on Jun 5, 2009 8:53 AM -
LSMW-Error during processing of BDC session change to material master MM02
I have created an LSMW for changing material master data. I recorded MM02 and using the "select views" screen selected the accounting 2 view and entered the information in the fields on that screen requiring changes. I've set up all of the technical screens for the LSMW. However, when I process the BDC session with "display errors only", the program stops at the select view screen with an error message "Select at least one view". Any ideas how I can process through this screen so that the Accounting 2 screen opens in the BDC session? One further note, I set that selection as a constant in the field mapping and conversion rules screen. The field name recorded as KZSEL_05.
hi
one question how did you choose the view? i mean to ask by scrolling down using mouse or page down.
the scrolling by mouse is not recognized by recording and that may be the error. so whenever you have to go down in screen please use page down not scrolling at least in LSMW. -
Material Master workflow. Doubt?
Hi friends,
I am having a Existing Material Master workflow.
In that there is 1 tcode JI1D.Its working fing before i am modifying below activity.
Now i am modifying this workflow ie i am including 1 CONDITION TYPE in this tcode.
If plant is INDIA then call this JIID.Else skip this tcode.Only if ...else thats all.
Then i moved to PRODUCTION.
Its not triggering for both plant.
Pls suggest
MoosaHello,
Did it work in Development?
Did it work in Test?
Did the transport succeed without errors?
Have you done a SWU_OBUF?
How is it not working?
regards
Rick Bakker
Hanabi Technology
Maybe you are looking for
-
Prestage content no longer working after SCCM 2012 R2 CU1 update
I run SCCM 2012 R2 CU1 on a Windows 2008 R2 server. I upgraded to CU1 in June, and today is the first time I've attempted to pre-stage a package since then. After pre-staging my package and getting the content out to the target DP, I went to propert
-
Need help restoring an itouch that erased itself and now gives an error message
I have an ipod touch and was syncing it when it seems to have completely erased itself. Before that I had it in my purse and it had a weird yellow and white screen with no words. I turned it off and back on and it seemed fine. Anyway after that i syn
-
How to show a jtable created when a tree node is selected in a jsplit pane
hello, does anyone know how you would go about updating a jtable you have created in a split pane when the data of the jtable changes? i have a jtree that creates a jtable when a node is selected. i want to display this jtable in a split pane that is
-
AWM error when enabling for discoverer.
Hi, I am experiencing some difficulties enabling my analytic workspace for discoverer. I have a created a workspace based on a cube with 1 fact and 2 dimensions. I used Oracle Enterprise Manager 9.2.0.1.0 to create my meta data and AWM 9.2.0.4.1D to
-
Translated item labels swap to original language after validation error
Hello, I've the weird behaviour in my application that translated item labels change to the original label name in case a validation error on that item occurs. I am displaying inline+notification errors. Only the labels of the "error-items" show the