Doubt in Configuring the Integration Engine
Hi,
We maintained the Integration server URL in SLD in the Business System part which points to ABAP stack...
But in SXMB_ADM we didnt configured the IS, we just have the parameter of IE as HUB. thats it.
Do we need to Configure the IS also in the SXMB_ADM????
Regards
Suman
Hi,
On the Integration Server:
In sxmb_adm -> IE Configuration, you need to maintain the role of the system as 'Integration Server'. Do not enter any URL for the IS.
We did This as u said adn we have the info. like u said only
our basis configured like that only before u said
On the Application System
In sxmb_adm -> IE Configuration, you need to maintain the role of the system as 'Application System'. Enter the URL to the entry pipeline of the integration server (http://<PI_Server>:<port>/sap/xi/engine?type=entry).
This we didnt maintained any thing in the Application server.
Even though we are able to get process the Files. we are able to see all the pipeline steps in MONI.
This is IDOC----File Scenario
Regards
Suman
Similar Messages
-
Auto Cancellation of Messages in the Integration Engine.
Dear all,
Issue: Auto Cancellation of Messages in the Integration Engine.
Description: Actually Today, I'm facing Problem in message mapping and its showing error "JCO_SYSTEM_FAILURE". Finally the message is Auto Canceled and showing the status in the Message Monitoring as Canceled with Errors.
I have doubt here how the messages are Auto Canceled with Error? Is there any system or ABAP program which cancelling these messages?
Waiting for yours valuable reply on the above issueu2026
Edited by: BhavinPatel on Oct 7, 2010 8:15 AMHi Bhavin,
Two report program are there to cancel error msgs automatically..
1) RSQIWKEX
2) RSXMB_CANCEL_MESSAGES
Regds,
Pinangshuk. -
System not configured as Integration Engine
Hi Friends ,
I have written an outbound client proxy for my interface . I am using XI to File Adapter scenerio .
When I run the zprogram in R3 then I get the error
System not configured as Integration Engine ...
Please suggest .
Best Regards
ChanHi Chane,
Go to SXMB_ADM->Configuration->Integration Engine COnfiguration->Choose your R/3 system as Application System
Refer this Configuration Guide - Page no 27
https://websmp102.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Regards,
Moorthy -
Error: System not configured as Integration Engine
Hi ,
I was trying to simulate the following scenario in SAP XI:
HTTP--> SAP XI --> (RFC/BAPI)SAP R/3
Let me clear what i did.
I have to call a BAPI using RFC adapter in XI to display some information on a request of some Http app.
1. I have Imported the RFC BAPI into IR.
2. I have created the XSD files for http Re and res messages.
3. I have created the XSLT mapping programs and put them in a zip file and imported into IR.
4. I have created a Interface mapping and assign the created messages and mapping programs.
5. In ID i have created a Business service for my web application.
6. Receiver determination created in Id and Interface determination and receiver agreement in ID and activated the changes.
7. I have tested the same by sending the request from my web application to xi plain http adapter as follows:
http://grserver:8000/sap/xi/adapter_plain?bs=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
and in the result i have got the following error:
"System not configured as Integration Engine"
but i have tried it many times and some times it gives me correct results but after that the same error ios coming.
so can you tell me what could be wrong in the configuration of XI of what is the solution for this problem.
Reagrds
Gopesh Kumar AgarwalHi,
What is the version of XI you are using? If u are usign XI2.0, ur URL is correct. But if you are using XI3.0 then use <b>service</b>=<SENDERSERVICE>instead of
<b>bs</b>=<SENDERSERVICE> parameter in your URL.
<b>bs</b> is replaced by <b>service</b> in XI3.0
Your URL will be http://grserver:8000/sap/xi/adapter_plain?<b>service</b>=XIWS_web&namespace=urn%3Axi%3Asap%3Awebapp&interface=HTTP_out&qos=BE
Hope this helps you.
Cheers,
Siva Maranani.
Message was edited by: siva maranani
Message was edited by: siva maranani -
How to configure the Integration Server Settins?
Hi,
I am doing a scenario like Idoc 2 File, I am passing parameter of Adapter Engine is a Integration Server, and when we generate a Idoc and send to XI system using TC: WE19. XI System is not picked the Idoc, and when i am checking RWB the Adapter Framework. Please Guide me how to configure the Integration Server setting.
Regards
MohanHi,
did you checked the ur IDOC outbound status?
also check IDX5, whether it has reached XI system.
plz do check all ur settings:
1. Create RFC destination to XI in SM59 transaction
2. Create a port in we21
3. Create partner profile we20
4. we05- Idocs monitoring
XI Settings:
1. Create RFC destination to XI in SM59 transaction
2. Idx1 Port maintenance
3. Idx2 - Metadata maintenance
4. Idx5 All Idoc inbound and outbound messages
regards
Message was edited by:
Vijaya Lakshmi MV -
Registration of Business system for the Integration Engine Java in the SLD issue
Hi,
We have completed the installation of PI-AEX 7.4 SR1 then we ran the below wizards successfully.
- Configuration Wizard: PI-AEX initial setup
- Configuration Wizard: PI Self Test for AEX
However when we were Checking the AEX Configuration as per help.sap.com
Check the registration of a business system for the Integration Engine Java in the SLD:
Enter https://<host>:<port>/sld .
Choose Start of the navigation path Business System Next navigation step Integration Engine Java <SID> Next navigation step Integration End of the navigation path.
The pipeline URL must be: http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet?ximessage=true .
More information: SAP Note 1435392
for us the Pipeline URL is as below
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
and the rest " ?ximessage=true " is not there.
Also we ran the below wizard
Configuration Wizard: PI Self Test for AEX
and it finished successfully without any issue.
Any Suggestions what could be missing.
Thanks,
Regard
Ahmed MohammedHi,
I found the below SAPNOTE which confirms that the Pipeline URL should be
http://<host_fully_qualified>:<port>/XISOAPAdapter/MessageServlet
1564449 - PI CTC Wrong Pipeline Url after AEX Initial Setup
However on help.sap.com it is different.
Any one experienced the same ?
Regards
Ahmed Mohammed -
Configurate the integration engine of an R/3
hi experts!
I need to configurate the integration engine of an R/3 receiver .... ( R3 SENDER>XI-->R3 RECEIVER )....in order to be able to see aynchronous messages (corrects an incorrects) and asynchronous messages (corrects), and honestly speaking i don't know hot to do it or the values that i have to chose.
the parameters that I have, are this:
ARCHIVE----
PERSIST_ARCH_MANUAL_CHANGES
ARCHIVE--PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
ASYNC
DELETION-----PERSIST_DURATION--
SYNC
DELETION-----PERSIST_DURATION_ERROR--
SYNC
DELETION-----RELATED_OBJECTS--
ASYNC
DELETION-----RELATED_OBJECTS--
ROWS
DELETION-------ROWS_PER_LOOP
HTTP_PLAIN----SUPPRESS_URL_PARAMETER
IDOC----
EXTERNAL_MAPPER
IDOC----
SYNTAX_CHECK
IDOC----
XML_CONVERSION
MONITOR----
CCMS_MONITORING
MONITOR----
QRFC_RESTART_ALLOWED
PERF----
DAYS_TO_KEEP_DATA - -
AGGREGATION_ITEM
PERF----DAY_KEEP_DATA -
MEASUREMNT_ITEMS
PERF----
MAX_ENTRIES
PERF----
MEASUREMENT_LEVEL
PERF----
MEASUREMENT_PERSIST
RFCADAPTER----LOGGING
RUNTIME-------ACK_SYSTEM_FAILURE
RUNTIME-------CACHE_DIRTY_READ
RUNTIME-------ENGINE_TYPE
RUNTIME-------ENTRY_LOCK
TUNING----
EO_OUTBOUND_PARALLEL
TUNING----
EO_OUTBOUND_PARALLEL_SPLIT
TUNING----
IS_RETRY_LIMIT
and my actually configuration is this:
ARCHIVE PERSIST_DURATION ASYNC 2 1
DELETION PERSIST_DURATION ASYNC 2 1
DELETION PERSIST_DRATION SYNC 2 0
DELETION PERSIST_DURATION_ER SYNC 2 1
MONITOR CCMS_MONITORING 1 0
MONITOR QRFC_RESTART_ALLOWED 1 0
RUNTIME ENGINE_TYPE LOC UNDEFNED
RUNTIME IS_URL des:/XID
THANKS...Hi,
What you are searching for is only about RUNTIME category parameters. Try changing parameters LOGGING (for async) and LOGGING_SYNC from default to 1. You can also try some other parameters, you can search for the documentation for each one or just changing and testing.
ACK_SYSTEM_FAILURE
ACL_CHECK
CACHE_DIRTY_READ
CACHE_REFRESH_PACKAGE_SIZE
ENGINE_TYPE
ENTRY_LOCK
ERROR_ON_NO_RECV_FOUND
HTTP_TIMEOUT
IS_RFC_DESTINATION
IS_URL
LOCK_MESSAGE
LOGGING
LOGGING_AMF_ERR
LOGGING_PROPAGATION
LOGGING_SYNC
PACKAGING
QUEUE_COUPLING
RFC_DEST_QUEUE_COUPLING
TRACE_LEVEL
TRACE_LEVEL_PROPAGATION
regards.
roberti -
Using the SOAP inbound channel of the Integration Engine
Hi,
I am following the blog of Stefan Grube.
/people/stefan.grube/blog/2006/09/21/using-the-soap-inbound-channel-of-the-integration-engine
However I have difficulties.
Is this blog still relevant for SAP PI7.10?
I have set this up as a test for a scenario I have.
Current Scenario NOT using your Blog and working perfectly.
SandBox PI Development PI
File > SOAP > SOAP > ABAP Proxy
What I am attempting now is.
SandBox PI Development PI
File > SOAP > Integration Engine > ABAP Proxy
I am using our SAP PI Sandbox to push a SOAP message using a Receiver SOAP adapter channel.
Transport Protocol: u201CHTTPu201D
Message Protocol: u201CSOAPu201D
Conversion Parameters: u201CDo not Use SOAP Envelopeu201D
Target URL: u201Chttp://<Integratio Server Host Development PI>:<Port>/sap/xi/engine?type=entry&version=3.0&Sender.Service=FigmentD&Interface=urn:figment-co-za:fleetcard:efuel_50ppm^oa_Msg50ppm&QualityOfService=ExactlyOnce&sap-user=<PIAPPLUSER>&sap-password=<PASSWORD>u201D
SOAP Action: u201Chttp://sap.com/xi/WebService/soap1.1u201D
I am however getting the following error on the SandBox Pi AE.
u201CSOAP: call failed: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 302 MOVED TEMPORARILYu201D
Please can you assist in this matter.
Regards
Willie HugoHi williem,
Stefans weblog works great. The error you are getting is some wrong data you are sending. Please verify the data you are sending is correct. Also check this threads for the same errror:
ADAPTER.HTTP_EXCEPTION / HTTP 302 Moved Temporarily
Re: SOAP client receives HTTP 302 Found
Re: Synchronous RFC-XI-Web Service with no request method
HTTP Error (302) Found when calling Web Service on XI
Regards,
---Satish -
Change status for 18 million messages in the Integration Engine
Hello there!
I have the following situation and I wonder that maybe you could help. Currently I have more than 18 million messages for the BC_XMB object in the Integration Engine for a BI System (connected to a PI system).
The problem here is that the archiving/deletion jobs in this BI system are faulty since maybe a couple of years ago and all of these messages are marked as "Archivable":
What I'm trying to do here is to change the status for these 18 million messages from "can be archived" to "to be deleted" since there is no way that I can archive this 18 million messages (filesystem capacity). I've been looking many option but I cannot figure out how to do it.
Maybe, if you know an alternative way to do this, I will be very pleased to hear it.
Thanks a lot in advance.
CarlosRaghu.
I've done the following:
1. I've executed SE38 tx code.
2. I've entered the "RSXMB_DELETE_MESSAGES" report as "Program"
3. As the "RSXMB_DELETE_MESSAGES" report does not have a selection screen, it must be executed with default parameters. So, I selected "Program -> Execute -> Background".
4. There are no available variants, so I clicked on the "Execute immed." button.
5. The job starts. I can monitor it on the SM37 tx code.
6. It only deleted 20 messages.
What I get from this, is that the "RSXMB_DELETE_MESSAGES" report cannot delete the big part of the messages since them are marked as "Archivable" and not as "Archived".
what do you think of it??
regards
Carlos. -
How to call the integration engine not the remote function.
Hi!
I want to get the data from the client 000 with an rfc call through the xi (client 001). But when I call the function via rfc, the funciton is executed in the client 001, instead of forwarding the call to the integration engine.
How can I forwarded to the engine this call?
I only made a sender communication channel in the DI which is an sener adapter type RFC.Thanks for the reply.
But I have no receiver channel yet. so i can't even reach any server if my call would be catched by the intergration engine.
But unfortunately I can reach the target system without the engine.
I use java connector to connect the external system to my intergration server.
Please help. -
Atack interface directly in the integration engine
Hi guys.
Id like to know how to make to consume a sender interfece directly attacking the integration engine.
We work with an EDI enterprise and we only provide them the interface XSD, inteface name, interface namespace, remote user and password and they achive to consume this inteface but I don't know how.
There isn't any sender channel assoicate to this sender interface...
How could they get this? Java?
Thanks a lot!!!Hi,
You can directly post to integration engine from your EDI using the below URL if thats what you are looking for.
http://<host>:8000/sap/xi/adapter_plain?namespace=<ns>&interface=<intface>&service=<BS>&QOS=<EO>&sap-client=<003>&sap-language=<EN>&sap-user=<user>&sap-password=<password>
This would be a direct HTTP communication and no sender channel is required. its served by the integration engine itself.
please check
http://help.sap.com/saphelp_nw04/helpdata/en/82/f4993c03e0cd37e10000000a11405a/content.htm
regards,
francis -
Error CIM_ERR_FAILED - Configure the integration server for sld
Hi,
I´m running the Configuration Wizard SLD in "PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage". In step 33/142 Configure the integration server for sld, I got following error:
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement
Someone help me?
Regards,The version is 7.0. I skip this step and finished with sucess. No run the step:
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Cancelled
PI_01_This template checks if the necessary services are started Cancelled
PI_05_This wizard will configure the integration server for sld Incompletely executed
These steps are with the same error.
Error: CIM_ERR_FAILED: Qualifier MAX(1) violated for property reference SAP_XIIntegrationServerLogicalIdentity.SameElement -
Messages "to be delivered" at the integration Engine
Hi
Since Yesterday, we have a lot of messages with the status "to be delivered".
I have checked the SMQ1, the SMQ2 and nothing is there, but I saw 2 entries in SM58, blocked.
I deleted those entries but the system is still not working.
SMQR is showing the process as "inactive", and if I do not start it manually, it does not start automatically, but even starting it manually, nothing seems to happen.
I am unable to delete the firtst message that stays "to be delivered" its status is Cancelable No, Repeatable No.
The messages are in the Integration Engine.
I checked with no luck:
- Register Queues and Activate again the Queues
- Transaction SLDCHECK shows everything Ok
- AI_DIRECTORY_JCOSERVER , AI_RUNTIME_JCOSERVER and INTEGRATION_DIRECTORY_HMI seem to be Ok
- Stop and Start the SAP
- Refreshing the Cache
what else to check?
many thanksStatus: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords -
What messages does it shows the integration engine(sycn/ asyn)?
What messages does it shows the integration engine(sycn/ asyn)?
Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Solution:
This is done via the Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>
/<PROTOCOL>
Only if this was executed successfully the Messaging System returns HTTP 200 to the Integration Server and the Status TO_BE_DELIVERED moves to DELIVERING
1. Try logging into Sap GUI with two users: XIAPPLUSER & XIAFUSER
to see if they are blocked
2. We can check the messages:
AdapterFramework
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
ApplicationSystem
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
in the exchange profile to make sure the right passwords -
Configuration of Integration Engine Trace and Logging
Hi,
on XI we can configure tracing and logging of messages via SXMB_ADM / Conf Integr Engine / category RUNTIME parameter LOGGING or TRACE_LEVEL. I connected an application system (WAS 6.20) and cant find this parameters. They r not chooseable. Does anybody know why? Is there another functionality to customize the trace?
Regards,
UdoHi Udo -
Did you apply the APPINT component? More info in Note 439915.
Regards,
Jin
Maybe you are looking for
-
SRM-MDM catalog 3.0 - Installation Process
Hi All, I'm in the process of installing SRM-MDM catalog 3.0 but I'm not sure about the correct installation process. The SRM-MDM catalog 3.0 installation guide indicates that the following instances are mandatory for SRM-MDM Catalog system: 1- Java
-
Delivery Document not getting closed
Hi Experts, I am using 2007 B PL 08. I want to close the delivery document through SDK against which no Invoice or return is booked. it gives me error 'Internal error -5002 occured' when I try to close this document with following code. Dim fd As SAP
-
1328 Error applying patch to [filename].
A file has changed or is missing. Uninstall and reinstall the program. I have tried this solution twice and it did not resolve the issue.
-
I am prompted every time i visit a site that i enter a password on to save it in firefox 18, it's now getting annoying. I have tried to turn it off, but the box in firefox settings is shaded and won't allow me to turn password manager off, i know i c
-
Disp+work process was down after the Restoreing the backup
Disp+work process is down after the Restore of the backup s/m configration: windows 2003 server + oracle 10g The below is the log file trc file: "dev_disp", trc level: 1, release: "700" sysno 01 sid PRA systemid 560 (PC with Windows NT)