Doubt in creating sales
While creating sales order there exists error.Let me explain in detail.
I have created customer master record,material master record & customer material information record.After creating customer master record the result shown is 0000300004 customer master record is created.
Then i came for creating sales order.
I have filled every details.
then i pressed enter.there only exists the problem.
it is getting displayed as no customer master record 300004 hsa been created for sold to party.please solve my problem.
Thanks for ur reply.
but still there exists the problem.
yes i have created the company code,sales organisation,sales division.
then only i created customer master record.it is getting displayed as customer master data 0000300004 is created.upto this step there is no error.
then i proceeded with va11
in that screen i mentioned tne necessary deatils.and then finally i had given material-s1 & standard price-10.then i pressed enter.there only it is getting displayed as no customer master record is not created for sold to party.
if u can able to solve my errror.please explain it in detail.
Similar Messages
-
Purchase order to create sales order and delivery
Hello all,
I am planning to create sales order and since i require customer Purchase order to create sales order, i am also planning to create purchase order.
My question is who should i mention as vendor or who would be the vendor when i create a purchase order that would be used to create sales order.
should it be the customer who orders the material or should it be the plant from which the material is going to be supplied.
and also in the line item for the field "plant", should i enter the supplying plant or should i enter the ship to plant.
Thanks,
MaxxThe moment you mention 'Vendor', the SAP synonym for it is 'Supplier' hence it would be the supplier (and not customer), that is the plant from which the marerial is supplied. Hence your vendor in customer PO will be the supplying plant.
The 'Plant' in the line item in case of PO will be the receiving plant (the customer's Plant).
I hope this answers your doubt.
Amit G -
Need to create sales out of purchase order using idocs
Hi All,
I have a requirement to create sales order based on purchase order with in the same sap system and same client(using orders04 idoc type).I have some doubts below could you please some body clarify?
I know the basic steps in ALE(theritical knowlege)but I need clarifications for below questions.
1)Which tehnology I should use here ALE or EDI?
2)With in the same client how can I create 2 logical systems.
3)How the idoc will go the recevier I mean what all are the ways to trigger outbound idoc from sender side.
4)Inbound side how the sales order will create based on the inbound idoc?Is it automatic from inbound settings or we have to do anyting for this?
5)I need to check some conditions with the inbound purchase order data before creating sales order.I think this one we can do in the user exit of inbound function module .Can I control the type of document that it has to create(ex sales order based on some condition or quotation based on some other condition).
Best regards
MaheshHi Mahesh,
My suggetion is that develope program to do your scenario... Use BAPI to create Sales order. First confirm with the Functional team for the input for sales order about sales area, company code, conditions type to be used while creation a sales order against Purchaser order... If the details is same then. First get the details of the Purchase order from BAPI " 'BAPI_PO_GETDETAIL' or you can get details by select queries on EKKO & EKPO for header and details....
Then pass data to BAPI of sales order creation 'BAPI_PO_CREATE' . to create sales order and handle error with parameter RETURN = IT_BAPIRETURN
by giving loop on that....and display in the output.....
This is the simplest way of doing your process...
If any other help please let me know.....
reward points..
Cheers,
Sagun Desai.... -
How to use Bapi for creating sales order
Dear All,
I am facing problem in creating Sales orders using BAPI.
Actually I am getting one file as an input and after validating the contents in the file i am preparing an internal table which has 6 fields - Customer number,PO Number,Material Number,Quantity,Price,Unit of measure.
Now my doubt is that while using BAPI_SALESORDER_CREATEFROMDAT2 , I am not getting how to pass PO Number and Customer number.
Please Help.
Regards,
ShwetaHi shweta upadhyay
I have gone through you are post i have done some coding for creating sales order using bapi , I think it is helpful for you.
*& Report YOBJ_BAPI_SALESORDER
*& REPORT : CREATING SALES ORDER USING STANDARD BAPI
*& AUTHOR : S.PAVAN KUMAR INUMARTHY
REPORT YOBJ_BAPI_SALESORDER.
DATA : ORDER_HEADER_IN LIKE STANDARD TABLE OF BAPISDHD1 WITH HEADER LINE.
DATA : ORDER_ITEMS_IN LIKE STANDARD TABLE OF BAPISDITM WITH HEADER LINE.
DATA : ORDER_PARTNERS LIKE STANDARD TABLE OF BAPIPARNR WITH HEADER LINE.
DATA : RETURN TYPE STANDARD TABLE OF BAPIRET2 WITH HEADER LINE.
DATA : SALESDOCUMENT LIKE BAPIVBELN-VBELN.
*APPENDING VALUES FOR HEADER.
ORDER_HEADER_IN-DOC_TYPE = 'TA'.
ORDER_HEADER_IN-SALES_ORG = '1000'.
ORDER_HEADER_IN-DISTR_CHAN = '10'.
ORDER_HEADER_IN-DIVISION = '00'.
ORDER_HEADER_IN-SALES_GRP = '130'.
ORDER_HEADER_IN-SALES_OFF = '1030'.
APPEND ORDER_HEADER_IN.
*APPENDING VALUES FOR ITEM
ORDER_ITEMS_IN-MATERIAL = 'M-13'.
ORDER_ITEMS_IN-PLANT = '1000'.
ORDER_ITEMS_IN-SALES_UNIT = 'ST'.
ORDER_ITEMS_IN-DIVISION = '07'.
ORDER_ITEMS_IN-GROSS_WGHT = '28000'.
ORDER_ITEMS_IN-NET_WEIGHT = '28000'.
ORDER_ITEMS_IN-UNTOF_WGHT = 'KG'.
ORDER_ITEMS_IN-VOLUME = '0.780'.
ORDER_ITEMS_IN-VOLUNIT = 'M3'.
APPEND ORDER_ITEMS_IN.
*APPENDING VALUES FOR PARTNER
ORDER_PARTNERS-PARTN_ROLE = 'AG'.
ORDER_PARTNERS-PARTN_NUMB = '0000001000'.
ORDER_PARTNERS-COUNTRY = 'DE'.
ORDER_PARTNERS-TRANSPZONE = 'D000080000'.
APPEND ORDER_PARTNERS.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
* SALESDOCUMENTIN =
ORDER_HEADER_IN = ORDER_HEADER_IN
* ORDER_HEADER_INX =
* SENDER =
* BINARY_RELATIONSHIPTYPE =
* INT_NUMBER_ASSIGNMENT =
* BEHAVE_WHEN_ERROR =
* LOGIC_SWITCH =
* TESTRUN =
* CONVERT = ' '
IMPORTING
SALESDOCUMENT = SALESDOCUMENT
TABLES
RETURN = RETURN
ORDER_ITEMS_IN = ORDER_ITEMS_IN
* ORDER_ITEMS_INX =
ORDER_PARTNERS = ORDER_PARTNERS
* ORDER_SCHEDULES_IN =
* ORDER_SCHEDULES_INX =
* ORDER_CONDITIONS_IN =
* ORDER_CONDITIONS_INX =
* ORDER_CFGS_REF =
* ORDER_CFGS_INST =
* ORDER_CFGS_PART_OF =
* ORDER_CFGS_VALUE =
* ORDER_CFGS_BLOB =
* ORDER_CFGS_VK =
* ORDER_CFGS_REFINST =
* ORDER_CCARD =
* ORDER_TEXT =
* ORDER_KEYS =
* EXTENSIONIN =
* PARTNERADDRESSES =
IF SY-SUBRC = 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
ENDIF.
WRITE : 'SALES ORDER IS :', SALESDOCUMENT.
This will be very helpful for you .
this one is the correct answer I have tried it and I am posting it for you.
Message was edited by: pavan inumarthy -
How to restrict the order reason in Tcode Va01 while creating sales order
Hi Gurus,
My requirement is
while creating sales order in VA01
if order type is Zvol
than the list of order reasons has to be restricted.
Now 15 are coming from OVAU tcode
I need only 5 from these.
Thanks & Reagrds
kals.Hi,
By doing the user exit in IW32 we achieved the requirement of restriction of maintenance order TECO functionality if any Service Entry sheet pending with reference of maintneance order.
regards
JKM -
Issue in creating sales order using BAPI's...?
Hi Guru's,
i had generated the sales order using the BAPI..but could please guide me how to declare the data declaratin same fields as globally and how to move internal table and how to append ....
thanks in advance...
REPORT z_bapi_salesorder_create.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
call FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.*& Report ZAREPAS30
REPORT zarepas30.
DATA : gs_vbeln TYPE vbak-vbeln,
gs_order_header_in TYPE bapisdhd1,
gs_order_header_inx TYPE bapisdhd1x,
gt_order_items_in TYPE STANDARD TABLE OF bapisditm,
gwa_itab1 TYPE bapisditm,
gt_order_items_inx TYPE STANDARD TABLE OF bapisditmx,
gwa_itab2 TYPE bapisditmx,
gt_order_partners TYPE STANDARD TABLE OF bapiparnr,
gwa_itab3 TYPE bapiparnr,
gt_return TYPE STANDARD TABLE OF bapiret2,
gwa_itab4 TYPE bapiret2.
Sales document type
PARAMETERS: p_auart TYPE auart OBLIGATORY.
Sales organization
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
Distribution channel
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
Division.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
Requested Delivery Date
PARAMETERS: p_edatu TYPE edatu OBLIGATORY.
Sold-to
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
Ship-to
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
Material
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
Quantity.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
Plant
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
gs_order_header_in-doc_type = p_auart.
gs_order_header_inx-doc_type = 'X'.
Sales organization
gs_order_header_in-sales_org = p_vkorg.
gs_order_header_inx-sales_org = 'X'.
Distribution channel
gs_order_header_in-distr_chan = p_vtweg.
gs_order_header_inx-distr_chan = 'X'.
Division
gs_order_header_in-division = p_spart.
gs_order_header_inx-division = 'X'.
Reguested Delivery Date
gs_order_header_in-req_date_h = p_edatu.
gs_order_header_inx-req_date_h = 'X'.
gs_order_header_inx-updateflag = 'I'.
Partner data
Sold to
gwa_itab3-partn_role = 'AG'.
gwa_itab3-partn_numb = p_sold.
APPEND gwa_itab3 TO gt_order_partners .
ship to
gwa_itab3-partn_role = 'WE'.
gwa_itab3-partn_numb = p_ship.
APPEND gwa_itab3 TO gt_order_partners .
ITEM DATA
gwa_itab2-updateflag = 'I'.
Line item number.
gwa_itab1-itm_number = '000010'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
Line item number.
gwa_itab1-itm_number = '000020'.
gwa_itab2-itm_number = 'X'.
Material
gwa_itab1-material = p_matnr.
gwa_itab2-material = 'X'.
Plant
gwa_itab1-plant = p_plant.
gwa_itab2-plant = 'X'.
Quantity
gwa_itab1-target_qty = p_menge.
gwa_itab2-target_qty = 'X'.
APPEND gwa_itab1 TO gt_order_items_in.
APPEND gwa_itab2 TO gt_order_items_inx.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = gs_order_header_in
ORDER_HEADER_INX = gs_order_header_inx
IMPORTING
SALESDOCUMENT = gs_vbeln
tables
RETURN = gt_return
ORDER_ITEMS_IN = gt_order_items_in
ORDER_ITEMS_INX = gt_order_items_inx
order_partners = gt_order_partners.
Check the return table.
LOOP AT gt_return into gwa_itab4 WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error occured while creating sales order '.
ELSE.
Commit the work.
CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
WRITE: / 'Document ', gs_vbeln, ' created'.
ENDIF. -
Doubt in creating program to display application logs
Hi,
I have doubt in creating a program to display application logs.
The standard transaction code SLG1 has been used to display Application logs till now by the user.
They came up with the new requirement on this.
<u>The requirements were:</u>
1)New custom program shoud be created like SLG1 with limited selection fields( data from, date to, Program name and User)
2) Detail list should be displyed immediately when this program is executed because SLG1 gives Basic list,Detailed list which is getting displayed when 'Detail view' is selected in the first list.
I have created one program with limited selection fields as per the requirement using the below function modules .
BAL_FILTER_CREATE
BAL_DB_SEARCH
BAL_DB_LOAD
and BAL_DSP_LOG_DISPLAY
<u>Issue :</u> still I am getting the firt list.
both Basic and Detailled lists are getting triggered at the FM BAL_DSP_LOG_DISPLAY.
Is it only the way to copy and modify this FM.
Could you please suggest me?
Thans in advace,
babu.
Message was edited by:
babu v
Message was edited by:
babu vHello All,
Thanks for your valuable suggitions.
I have seen most of the demo programs.
I found one fm'BAL_DSP_PROFILE_NO_TREE_GET' which avoids the tree list which is getting listed above the profile list.
I have been searching alot to omit the Profile list. I searched alot to find any function modules realted to that.
The requirement was only the Detail list should only be listed.
Could you please suggest me to avopid that profile list also?
Thanks in advance,
babu
Message was edited by:
babu v -
Creating sale order by using BAPI
Hi,
My requirement is to create a inquiry(VA11), By using the Inquiry no as a input in report, i should create a salesorder using BAPI in which the datas should be flowed from inquiry to sale order. i did almost everything except the Pricing Condition.
I am fetching the pricing condition values from table KONV-KSCHL and passing the value via BAPI_SALESORDER_CREATEFROMDAT2 it creates saleorder. In the created salesorder, there are two same pricing conditions but different rate 1.) the price of the MATNR which is maintained 2.) the changed MATNR price in inquiry level,
i need the value which is changed in inquiry level that is 2nd value.
can anyone help me in this...REPORT ZSALESORDER.
<< Cut and paste without attribution from
create sales order using BAPI
removed >>
Edited by: Rob Burbank on Feb 24, 2009 10:43 AM -
Function module to add record into incompletion log of creating sale order
Hi SD Experts,
Do you know any function module / class to add record a into incompletion log procedure of creating / changing sale order process? We can do it through configuration OVA2 but I need to add more condition before adding to this table.
Thanks,
DuyHi,
Refer to The SDN Post : [user exit to update the incompletion log in sales order for pricing error |Re: user exit to update the incompletion log in sales order for pricing error].
Limitation : While creating Sales order, this works only for document type with external number range as the code required for updating XVBUV require Sales Order Number.
Regards
Vinod -
To create Sale Order , Delivery and then Billing Automatically .
hi all ,
I want to create a program which will create SALES ORDER , then make DELIVERY of it and then BILLING .
Also i want to restrict the sale order to be create of those CUSTOMER whose credit limit is exceed , which is maintain in FD32 tcode .
If i go with BDC for Sales order it creates the sales order with a warning message , which i dont want .
Is there any BAPI for doing this ?
I do have try to find out the customer whose credit limit are exceed so as to restrict them in Program itself , but do not find the table for credit exposure to compare it with credit limit .
Please give me your Suggestion .
Secondly , Which BAPI is suitable for DELIVERY and BILLING in 4.7 version .
Thanks .Hi,
Check these below BAPI's
BAPI_SALESDOCU_CREATEFROMDATA
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_OUTB_DELIVERY_CREATE_SLS Generates Delivery for Customer Order
BAPI_BILLINGDOC_CREATE Custimer Individual Billing Document : Create Billing Document
BAPI_BILLINGDOC_CREATEFROMDATA Create Customer Individual Billing Doc.
Regards,
Jyothi CH. -
Not able to create sales order using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
Hi Experts,
I am not able to create sales order . I am using BAPI - BAPI_SALESORDER_CREATEFROMDAT2
to create sales order .I am passing external sales order number to the parameter
SALESDOCUMENTIN.
I am getting following error.
"524 |Only quantity 1 EA is allowed (Item 00001"
Here EA is UOM(Unit of measurement).
Below is the sample program through which i am trying to create the sales order.
*& Report ZSDC_SALES_TEST
report zsdc_sales_test.
*DATA: wa_bapi_header TYPE bapisdhd1.
Include Name - ZSDC_SALES_ORD_UPLOAD_TOP
Program Name - ZSDC_SALES_ORD_UPLOAD_1393
Program Title - Include for Data Declaration and selection screen
Created by - Lalitha W
Created on - 18-Nov-2008
Object ID - SD_C_1393_SALES_ORDER_UPLOAD
Request Id - SD3K905579
Description - This is a common INCLUDE for data declarations and
*selection screen details.
HISTORY
Date |Developer |Req by | Description |Reference ID
| | | |
| | | |
TYPE-POOLS
*TYPE-POOLS: truxs, abap, slis.
TABLES
*TABLES: t100.
TYPES
types:begin of ty_header,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(4) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) TYPE c, " Partner(Bill To Party Number)
partner_2(25) TYPE c, " Partner(Payer Number)
partner_3(25) TYPE c, " Partner(Sales Responsible Number)
partner_4(25) TYPE c, " Partner(Order admin)
partner_5(25) TYPE c, " Partner(Contact person)
partner_1(10) type c, " Partner(Bill To Party Number)
partner_2(10) type c, " Partner(Payer Number)
partner_3(10) type c, " Partner(Sales Responsible Number)
partner_4(10) type c, " Partner(Order admin)
partner_5(10) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
end of ty_header.
types: begin of ty_item,
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
bstkd_e(35) type c, " Ship-to-party PO number
posnr(6) type c, " POSTION NUMBER
matnr(18) type c, " Material Number
kwmeng(18) type c, " Order Quantity
pstyv(4) type c, " Sales doc. item categ
kursk(18) type c, " EXCHANGE RATE****
ffprf(8) type c, " DIP PROFILE
werks(4) type c, " Delivering Plant
vstel(4) type c, " SHIPPING POINT
lgort(4) type c, " STORAGE LOCATION
route(6) type c, " Route
kurrf(18) type c, " EXCHANGE RATE-FI
ntgew(18) type c, " Net Weight
brgew(18) type c, " Gross Weight
gewei(3) type c, " Weight Unit
prctr(10) type c, " profit center
abgrs(6) type c, " RESULT ANALYSIS KEY
kalsm_k(4) type c, " COSTING SHEET
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
text_1(500) type c, " material Text 0001
tdspras_1(1) type c,
text_2(500) type c, " Pr Text 9001
tdspras_2(1) type c,
end of ty_item.
types: begin of ty_schedule_line,
bstkd(35) type c, "PO number
bstdk(10) type c, "PO date
bstkd_e(35) type c, "Ship-to-party PO number
posnr(6) type c, "sales doc.Item
etdat(10) type c, "Schedule line date
wmeng(2) type c, "Order Quantity
end of ty_schedule_line.
types: begin of ty_err ,
auart(4) type c, " Sales Order Type
vkorg(4) type c, " Sales Organization
vtweg(2) type c, " Distrubution Channel
spart(2) type c, " Division
kunnr_1(10) type c, " Sold to Party
kunnr_2(10) type c, " Ship to Party
augru(3) type c, " Order Reason
bstkd(35) type c, " PO Number
bstdk(10) type c, " PO Date
ketdat(10) type c, " Required Delivery Date
zterm(4) type c, " Payment Terms
inco1(3) type c, " Inco Terms -1
inco2(28) type c, " Inco Terms -2
prsdt(10) type c, " pricing date
waerk(5) type c, " Document Currency
vkbur(2) type c, " Sales Office
vkgrp(3) type c, " Sales group
pltyp(2) type c, " Price List type
kdgrp(2) type c, " Customer Group
bstkd_e(35) type c, " Ship-to-party PO number
submi(10) type c, " Collective Number
bname(35) type c, " Name
ihrez(12) type c, " Your Reference
kschl_1(4) type c, " Condition Type
kbetr_1(11) type c, " Amount
kschl_2(4) type c, " Condition Type
kbetr_2(11) type c, " Amount
kschl_3(4) type c, " Condition Type
kbetr_3(11) type c, " Amount
partner_1(25) type c, " Partner(Bill To Party Number)
partner_2(25) type c, " Partner(Payer Number)
partner_3(25) type c, " Partner(Sales Responsible Number)
partner_4(25) type c, " Partner(Order admin)
partner_5(25) type c, " Partner(Contact person)
tdspras_1(2) type c,
text_1(500) type c, " Text Before Items Z012
tdspras_2(2) type c,
text_2(500) type c, " Invocie Up Z034
tdspras_3(2) type c,
text_3(500) type c, " Invocie Down Z035
tdspras_4(2) type c,
text_4(500) type c, " Customer Reference Continue Z018
tdspras_5(2) type c,
text_5(500) type c, " Dispatch Marks/ Order Z019
tdspras_6(2) type c,
text_6(500) type c, " Ordered By Z003
tdspras_7(2) type c,
text_7(500) type c, " Sales Parameters Z002
kvgr1(3) type c, " Industry
kvgr2(3) type c, " customer BU
message(600) type c,
end of ty_err.
types: begin of ty_t685a,
kschl type kschl,
krech type krech,
end of ty_t685a.
INTERNAL TABLES
***header
data: g_krech_1(4) type c, " Calculation type for condition
g_krech_2(4) type c, " Calculation type for condition
g_krech_3(4) type c. " Calculation type for condition
g_krech_4(4) TYPE c, " Calculation type for condition
g_krech_5(4) TYPE c, " Calculation type for condition
g_krech_6(4) TYPE c, " Calculation type for condition
g_krech_7(4) TYPE c, " Calculation type for condition
g_krech_8(4) TYPE c, " Calculation type for condition
g_krech_9(4) TYPE c, " Calculation type for condition
g_krech_10(4) TYPE c, " Calculation type for condition
g_krech_11(4) TYPE c, " Calculation type for condition
g_krech_12(4) TYPE c, " Calculation type for condition
g_krech_13(4) TYPE c, " Calculation type for condition
g_krech_14(4) TYPE c, " Calculation type for condition
g_krech_15(4) TYPE c, " Calculation type for condition
g_krech_16(4) TYPE c, " Calculation type for condition
g_krech_17(4) TYPE c, " Calculation type for condition
g_krech_18(4) TYPE c, " Calculation type for condition
g_krech_19(4) TYPE c, " Calculation type for condition
g_krech_20(4) TYPE c. " Calculation type for condition
Items
data: g_krech_item_1(4) type c, " Calculation type for condition
g_krech_item_2(4) type c, " Calculation type for condition
g_krech_item_3(4) type c. " Calculation type for condition
g_krech_item_4(4) TYPE c, " Calculation type for condition
g_krech_item_5(4) TYPE c, " Calculation type for condition
g_krech_item_6(4) TYPE c, " Calculation type for condition
g_krech_item_7(4) TYPE c, " Calculation type for condition
g_krech_item_8(4) TYPE c, " Calculation type for condition
g_krech_item_9(4) TYPE c, " Calculation type for condition
g_krech_item_10(4) TYPE c, " Calculation type for condition
g_krech_item_11(4) TYPE c, " Calculation type for condition
g_krech_item_12(4) TYPE c, " Calculation type for condition
g_krech_item_13(4) TYPE c, " Calculation type for condition
g_krech_item_14(4) TYPE c, " Calculation type for condition
g_krech_item_15(4) TYPE c, " Calculation type for condition
g_krech_item_16(4) TYPE c. " Calculation type for condition
data: it_t685a type standard table of ty_t685a.
data: wa_bapi_header type bapisdhd1,
wa_bapi_headerx TYPE bapisdhd1x,
it_bapi_item type table of bapisditm,
it_bapi_itemx TYPE TABLE OF bapisditmx,
it_bapi_cond type table of bapicond,
it_bapi_condx TYPE TABLE OF bapicondx,
it_bapi_partner type table of bapiparnr,
it_bapi_shdl type table of bapischdl,
it_bapi_shdlx TYPE TABLE OF bapischdlx,
it_bapi_order_text type TABLE OF BAPISDTEXT,
it_bapireturn type table of bapiret2.
data: wa_bapi_item like line of it_bapi_item,
wa_bapi_itemx LIKE LINE OF it_bapi_itemx,
wa_bapi_cond like line of it_bapi_cond,
wa_bapi_condx LIKE LINE OF it_bapi_condx,
wa_bapi_partner like line of it_bapi_partner,
wa_bapi_shdl like line of it_bapi_shdl,
wa_bapi_shdlx LIKE LINE OF it_bapi_shdlx,
wa_bapi_order_text like LINE OF it_bapi_order_text,
wa_bapireturn like line of it_bapireturn.
*DATA: zmode(1) VALUE 'N'.
data: it_header type standard table of ty_header.
*DATA: it_temp_header TYPE STANDARD TABLE OF ty_header.
data: it_item type standard table of ty_item.
*DATA: it_temp_item TYPE STANDARD TABLE OF ty_item.
data: it_err type standard table of ty_err.
data: it_fline1 type standard table of tline,
wa_fline1 type tline.
data: it_thead1 type thead.
data: it_fline2 type standard table of tline,
wa_fline2 type tline.
data: it_thead2 type thead.
data: it_fline3 type standard table of tline,
wa_fline3 type tline.
data: it_thead3 type thead.
data: it_fline4 type standard table of tline,
wa_fline4 type tline.
data: it_thead4 type thead.
data: it_fline5 type standard table of tline,
wa_fline5 type tline.
data: it_thead5 type thead.
data: wa_header like line of it_header,
wa_item like line of it_item,
wa_err type ty_err,
wa_bill LIKE LINE OF it_bill,
wa_bill1 LIKE LINE OF it_bill,
wa_iterr like line of it_err,
wa_t685a like line of it_t685a.
wa_bill_item TYPE ty_bill_item.
data: it_schedule_line type standard table of ty_schedule_line,
wa_schedule_line type ty_schedule_line.
data: sales_order_no type bapivbeln-vbeln.
data: ext_sales_order_no type bapivbeln-vbeln.
Variable to be used to separate the fields which are concatenated by a
runtime character
*DATA: g_tabchar(1) TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
*DATA: wa_truxs_t_text_data TYPE truxs_t_text_data.
*DATA: g_filename TYPE string,
g_path TYPE string,
g_fullpath TYPE string,
g_user_action TYPE i,
g_file_encoding TYPE abap_encoding.
*DATA : g_text(8192),
data : g_mstring1(100) type c,
g_mstring2(100) type c,
g_mstring3(100) type c,
g_mstring4(100) type c,
g_mstring5(100) type c.
data: g_count1 type ebelp,
g_str_count1(6) type c.
data: g_count type ebelp,
g_str_count(6) type c.
*DATA: f_subrc LIKE sy-subrc,
f_subrc1 LIKE sy-subrc,
f_error(500) TYPE c,
item1(27) TYPE c,
item2(27) TYPE c,
item3(27) TYPE c,
item4(27) TYPE c,
i TYPE ekpo-ebelp.
*DATA: g_billplan_header TYPE c,
g_billplan_item TYPE c.
data : g_external_so type vbak-vbeln. "SO
SELECTION-SCREEN
selection-screen begin of block frame1 with frame title text-001 .
parameters:p_file1 type rlgrap-filename, "OBLIGATORY, "Header data.
p_file2 type rlgrap-filename, "OBLIGATORY, "Item Data.
p_file3 type rlgrap-filename, "Schedule line.
p_file4 type rlgrap-filename ."OBLIGATORY. "Error file.
selection-screen end of block frame1.
start-of-selection.
wa_bapi_header-doc_type = 'Z0MX'. "order type
wa_bapi_header-sales_org = '0130'."sales org
wa_bapi_header-distr_chan = '13'. "distr channel
wa_bapi_header-division = '13'. "division
Old code from copied program
wa_bapi_header-purch_no_s = wa_header-kunnr_2. " Ship to party
New code as required in Finland project
We are using to Header ->Order Tab -> Ship to Party -> Purchase order no (BSTKD_E) to store Old legacy SO number
wa_bapi_header-purch_no_s = 'MX100443'. "External SO i.e Old legacey SO number
wa_bapi_header-ref_1_s = '0000666666'. "Sold to party
wa_bapi_header-ord_reason = wa_header-augru.
wa_bapi_header-purch_no_c = 'ddr1234'. " PO number
wa_bapi_header-purch_date = sy-datum. " PO date
wa_bapi_header-req_date_h = sy-datum. " Required Delivery Date
wa_bapi_header-pmnttrms = '01'. " Payment Terms
wa_bapi_header-incoterms1 = wa_header-inco1.
wa_bapi_header-incoterms2 = wa_header-inco2.
wa_bapi_header-price_date = wa_header-prsdt. " Pricing date
wa_bapi_header-currency = wa_header-waerk. " Document Currency
wa_bapi_header-sales_grp = wa_header-vkgrp. " Sales group
wa_bapi_header-price_list = wa_header-pltyp. " Price list type
wa_bapi_header-cust_group = wa_header-kdgrp. " Cust Group
wa_bapi_header-ship_type = wa_header-vsart. " Shipping Type
wa_bapi_header-purch_no_s = wa_header-bstkd_e. " Ship-to-party po number
wa_bapi_header-collect_no = wa_header-submi. " Collective No.
wa_bapi_header-name = wa_header-bname. " Name
wa_bapi_header-ref_1 = wa_header-ihrez. " Your Reference
wa_bapi_header-cust_grp1 = wa_header-kvgr1. " Industry
wa_bapi_header-cust_grp2 = wa_header-kvgr2. " Customer BU
*ENDFORM. " f_header
IF wa_header-partner_1 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'AG'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_header-partner_2
importing
output = wa_header-partner_2.
IF wa_header-partner_2 IS NOT INITIAL.
wa_bapi_partner-partn_role = 'WE'.
wa_bapi_partner-partn_numb = '0000666666'.
wa_bapi_partner-itm_number = '000000'.
append wa_bapi_partner to it_bapi_partner.
clear wa_bapi_partner.
ENDIF.
perform f_item.
data : order_items_inx type table of bapisditmx with header line.
order_items_inx-material = 'X'. "
order_items_inx-target_qty = 'X'. "
order_items_inx-comp_quant = 'X'. "
order_items_inx-trgqty_den = 'X'.
order_items_inx-rnddlv_qty = 'X'.
order_items_inx-updateflag = 'I'.
order_items_inx-target_qu = 'X'.
order_items_inx-plant = 'X'. "
append order_items_inx.
call function 'BAPI_SALESORDER_CREATEFROMDAT2'
exporting
salesdocumentin = 'MX11111152'
order_header_in = wa_bapi_header
order_header_inx = wa_bapi_headerx
importing
salesdocument = sales_order_no
tables
return = it_bapireturn
order_items_in = it_bapi_item
order_items_inx = order_items_inx
order_partners = it_bapi_partner
order_conditions_in = it_bapi_cond.
if sy-subrc is initial.
commit work.
endif.
*& Form f_item
text
form f_item .
call function 'CONVERSION_EXIT_ALPHA_INPUT'
exporting
input = wa_item-posnr
importing
output = wa_item-posnr.
wa_item-posnr = '000010'.
IF sy-subrc EQ 0. "IS INITIAL.
move wa_item-posnr to g_str_count."commented out by shakti
ENDIF.
wa_bapi_item-itm_number = wa_item-posnr. " Line item
WA_BAPI_ITEM-PO_ITM_NO = WA_ITEM-EBELP.
wa_bapi_item-division = wa_item-spart.
wa_bapi_item-purch_no_c = 'ddr1234'. " po number
wa_bapi_item-purch_date = sy-datum. " po date
wa_bapi_item-purch_no_s = 'MX11111112'. " Ship-to-party po number
wa_item-matnr = 'MAXIMO_SERVICE'.
call function 'CONVERSION_EXIT_MATN1_INPUT'
exporting
input = wa_item-matnr
importing
output = wa_item-matnr
exceptions
length_error = 1
others = 2.
if sy-subrc is initial.
wa_bapi_item-material = wa_item-matnr. "material
endif.
wa_bapi_item-target_qty = '1'. " Order qty
wa_bapi_item-comp_quant = '1'.
wa_bapi_item-target_qu = 'EA'.
wa_bapi_item-fixed_quan = '1'.
wa_bapi_item-comp_quant = wa_item-kwmeng.
wa_bapi_item-trgqty_den = '1'.
wa_bapi_item-rnddlv_qty = wa_item-kwmeng.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = wa_item-ps_psp_pnr
IMPORTING
output = wa_item-ps_psp_pnr.
IF sy-subrc = 0.
wa_bapi_item-wbs_elem = wa_item-ps_psp_pnr.
ENDIF.
wa_bapi_item-item_categ = 'ZMAX'.
wa_bapi_item-ex_rate_fi = wa_item-kurrf.
wa_bapi_item-dli_profil = wa_item-ffprf. " Dynamic item processor profile
wa_bapi_item-route = wa_item-route. " route
wa_bapi_item-exchg_rate = wa_item-kursk.
wa_bapi_item-plant = '2090'. " Plant
wa_bapi_item-ship_point = 'FN11'. " Shipping point
wa_bapi_item-store_loc = wa_item-lgort. " stg loc
REPLACE ALL OCCURRENCES OF ',' IN wa_item-ntgew WITH '.'.
REPLACE ALL OCCURRENCES OF ',' IN wa_item-brgew WITH '.'.
wa_bapi_item-net_weight = wa_item-ntgew. "
wa_bapi_item-gross_wght = wa_item-brgew. "
call function 'CONVERSION_EXIT_CUNIT_INPUT'
exporting
input = wa_item-gewei
language = sy-langu
importing
output = wa_item-gewei.
EXCEPTIONS
unit_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
wa_bapi_item-untof_wght = 'KG'. " weight unit
replace all occurrences of ',' in wa_item-kursk with '.'.
replace all occurrences of ',' in wa_item-kurrf with '.'.
wa_bapi_item-profit_ctr = wa_item-prctr. " Profit center
wa_bapi_item-resanalkey = wa_item-abgrs. " RESULT ANALYSIS KEY
wa_bapi_item-cstg_sheet = wa_item-kalsm_k. " COSTING SHEET
append wa_bapi_item to it_bapi_item.
endform. " f_item
Thanks & regards,
Chetansee the following to create sales order:-
*& Report ZSALESORDER
*&DEVELOPED BY JANI KRUPA 4.10.2008
REPORT ZSALESORDER.
Parameters
Sales document type
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d .
SELECTION-SCREEN END OF LINE.
Complete Deliver
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text10 FOR FIELD p_autlf.
PARAMETERS: p_autlf TYPE autlf DEFAULT 'X'.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
DATA: lt_schedules_ink TYPE STANDARD TABLE OF bapisdhead1
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
v_text10 = 'Complete delivery'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
*Complete delivery
header-COMPL_DLV = p_autlf.
header-COMPL_DLV = 'X'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
item category
itemx-ITEM_CATEG = 'X'.
APPEND item.
APPEND itemx.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000020'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Fill schedule lines
lt_schedules_in-itm_number = '000020'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000020'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF. -
Problem while creating sales order using BAPI
Hi all,
i am creating a sales order from the purchase order data.
when my client will send a PO in EDI format, my 3rd party edi tool will convert that edi formatted PO to text format. then i will upload that text formatted PO to my program then i will create a SO from those uploaded PO data using BAPI BAPI_SALESORDER_CREATEFROMDAT2.
but,no sales order is being created.& also i am not getting any return message.by debugging also, i am not getting the error.plz suggest where i am doing mistake.below is the coding.
DATA:
gfilename LIKE rlgrap-filename.
*--Internal tables
DATA: BEGIN OF i_item OCCURS 50. "Create Material Document Item
INCLUDE STRUCTURE BAPISDITM .
DATA: END OF i_item .
DATA: BEGIN OF i_partner OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPIPARNR.
DATA: END OF i_partner.
DATA: BEGIN OF i_schedule OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPISCHDL .
DATA: END OF i_schedule.
DATA: BEGIN OF i_cond OCCURS 20. "Return parameter
INCLUDE STRUCTURE BAPICOND .
DATA: END OF i_cond.
DATA: BEGIN OF i_part OCCURS 0, " Internal table for split data
part(20),
END OF i_part.
DATA: BEGIN OF i_return OCCURS 20. "Return parameter
INCLUDE STRUCTURE bapiret2.
DATA: END OF i_return.
*-- Work areas
DATA: BEGIN OF wa_header . "sales Document Header Data
INCLUDE STRUCTURE BAPISDHD1.
DATA: END OF wa_header .
*DATA: BEGIN OF wa_return . "Output Structure
INCLUDE STRUCTURE BAPIRET2.
*DATA: END OF wa_return .
DATA: begin of sorder.
INCLUDE STRUCTURE BAPIVBELN.
DATA: end of sorder.
data:begin of t_upload,
ebeln(10), "PO no(seagate)
aedat like sy-datum , "PO date
bsart(4) , "PO type
vdatu like sy-datum , "requested delivery date
kunnr(10) , "customer no-sold-to-party
kunak like vbak-kunnr, "bill-to-party
name1_s(20), "name1 of sold-to-party
name2_s(15), "name2 of sold-to-party
land1_s(3), "country
ort01_s(10), "city
regio_s(3), "region(state/province)
pstlz_s(10), "postal code
adrnr_s(10), "address
bstkd_e(10), "end customer purchase order
posex(6), "end customer PO line no(item no)
kdmat(18), "end customer material no(part no)
kunag(10), "ship-to-party
name1_c(20), "name1 of ship-to-party
name2_c(15), "name2 of ship-to-party
land1_c(3), "country
ort01_c(10), "city
regio_c(3), "region(state/province)
pstlz_c(10), "postal code
adrnr_c(10), "address
posnr(6), "item no(seagate PO line no)
pstyv(4), "item category
matnr(18), "material no(seagate 9 digit part no)
zmeng(13), "Target quantity in sales unit
vrkme like vbap-vrkme, "sales unit
meins(3), "UOM
posnr_tot like vbap-posnr,"Total no. of line items
werks(4), "plant
vstel like vbap-vstel, "shipping point
empst(10), "receiving point
shtyp(4), "shipment type
route(6), "route
vsbed(2), "shipping conds
rkfkf like vbap-rkfkf, "method of billing for co/ppc orders
zterm(4), "terms of payment key
inco1(3), "F.O.B inco term1
inco2(3), "F.O.B inco term2
end of t_upload.
Data: wa_upload like t_upload,
i_upload like standard table of t_upload.
Data:v_kunnr like kna1-kunnr,
v_posnr like vbap-posnr,
v_matnr like vbap-matnr,
v_zmeng like vbap-zmeng,
v_kunag like kna1-kunnr.
*---Constants
CONSTANTS: c_comma TYPE c VALUE ',', " For splitting data at commas
c_01(2) TYPE c VALUE '01', " For movement code in Bapi
c_b TYPE c VALUE 'B', " For mvt. Indicator in Bapi
c_creat(5) TYPE c VALUE 'CREAT', " For button text
c_clear(5) TYPE c VALUE 'CLEAR', " For clear button
c_mvmt(4) TYPE c VALUE 'MVMT',
c_ok(2) TYPE c VALUE 'OK',
c_error(5) TYPE c VALUE 'Error'.
*--SELECTION SCREEN DESIGN--
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME.
PARAMETERS:
p_auart LIKE vbak-auart, " order type
p_vkorg LIKE vbak-vkorg, " sales org
p_vtweg LIKE vbak-vtweg, " dist channel
p_spart LIKE vbak-spart, " division
p_vkgrp LIKE vbak-vkgrp, " sales group
p_vkbur LIKE vbak-vkbur, "sales office
p_file(256) default 'c:/saleorder.txt'. "File name
SELECTION-SCREEN END OF BLOCK blk1.
SELECTION-SCREEN PUSHBUTTON 15(10) v_create USER-COMMAND creat.
SELECTION-SCREEN PUSHBUTTON 40(10) v_clear USER-COMMAND clear.
INITIALIZATION -
INITIALIZATION.
v_create = c_creat .
v_clear = c_clear.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM selectfile USING p_file.
*--AT SELECTION_SCREEN--
AT SELECTION-SCREEN .
IF sy-ucomm = c_clear.
PERFORM f_clear.
ELSE.
IF sy-ucomm <> c_mvmt.
**--- Validating the input data.
PERFORM f_check_inputs.
ELSEif sy-ucomm = c_creat.
*--- Validating the input data.
PERFORM f_check_inputs.
*-- Uploading the PO data.
PERFORM f_PO_upload.
*---checking the PO data
PERFORM f_check_upload_data.
*---create sales order from PO data
PERFORM f_Sales_order_create.
ENDIF.
FORM f_PO_upload.
gfilename = p_file.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
filename = gfilename
filetype = 'DAT'
TABLES
data_tab = i_upload
EXCEPTIONS
conversion_error = 1
file_open_error = 2
file_read_error = 3
invalid_type = 4
no_batch = 5
unknown_error = 6
invalid_table_width = 7
gui_refuse_filetransfer = 8
customer_error = 9
OTHERS = 10.
IF sy-subrc <> 0.
MESSAGE i398(00) WITH '(WS_UPLOAD)'
' Errors occured with exception '
sy-subrc.
ENDIF.
ENDFORM. " f_PO_upload
*& Form selectfile
text
-->P_P_FILE text
FORM selectfile CHANGING value(filename) TYPE c.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = gfilename
def_path = 'C:\'
mask = ',*.txt.'
mode = 'O'
title = 'Select File Name'
IMPORTING
filename = filename
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " selectfile
FORM f_Sales_order_create.
PERFORM f_fill_header.
PERFORM f_fill_partner.
PERFORM f_fill_item.
PERFORM f_call_BAPI.
ENDFORM. " f_Sales_order_create
*& Form f_fill_header
text
--> p1 text
<-- p2 text
FORM f_fill_header.
move p_auart to wa_header-doc_type.
move p_vkorg to wa_header-sales_org.
move p_vtweg to wa_header-distr_chan.
move p_spart to wa_header-division.
move p_vkgrp to wa_header-sales_grp.
move p_vkbur to wa_header-sales_off.
Read table i_upload into wa_upload index 1.
move wa_upload-ebeln to wa_header-purch_no_c.
move wa_upload-aedat to wa_header-purch_date.
move wa_upload-bsart to wa_header-po_method.
move wa_upload-vdatu to wa_header-req_date_h.
move wa_upload-bstkd_e to wa_header-purch_no_s.
*move wa_upload-route to wa_header-route.
move wa_upload-vsbed to wa_header-ship_cond.
move wa_upload-empst to wa_header-rec_point.
move wa_upload-shtyp to wa_header-ship_type.
move wa_upload-zterm to wa_header-pmnttrms.
move wa_upload-inco1 to wa_header-incoterms1.
move wa_upload-inco2 to wa_header-incoterms2.
ENDFORM. " f_fill_header
*& Form f_fill_partner
text
--> p1 text
<-- p2 text
FORM f_fill_partner.
if not wa_upload-kunnr is initial.
select single kunnr from kna1 into v_kunnr
where kunnr = wa_upload-kunnr.
if sy-subrc <> 0.
Message E014 with 'customer does not exist'.
else.
move 'AG' to i_partner-partn_role.
move wa_upload-kunnr to i_partner-partn_numb.
move wa_upload-land1_s to i_partner-country.
move wa_upload-name1_s to i_partner-name.
move wa_upload-name2_s to i_partner-name_2.
move wa_upload-ort01_s to i_partner-city.
move wa_upload-regio_s to i_partner-region.
move wa_upload-pstlz_s to i_partner-postl_code.
move wa_upload-adrnr_s to i_partner-address.
append i_partner.
endif.
endif.
if not wa_upload-kunag is initial.
select single kunnr from kna1 into v_kunag
where kunnr = wa_upload-kunag.
if sy-subrc <> 0.
Message E015 with 'end customer does not exist'.
else.
move 'WE' to i_partner-partn_role.
move wa_upload-kunag to i_partner-partn_numb.
move wa_upload-land1_c to i_partner-country.
move wa_upload-name1_c to i_partner-name.
move wa_upload-name2_c to i_partner-name_2.
move wa_upload-ort01_c to i_partner-city.
move wa_upload-regio_c to i_partner-region.
move wa_upload-pstlz_c to i_partner-postl_code.
move wa_upload-adrnr_c to i_partner-address.
append i_partner.
endif.
endif.
ENDFORM. " f_fill_partner
*& Form f_fill_item
text
--> p1 text
<-- p2 text
FORM f_fill_item.
loop at i_upload into wa_upload.
if not wa_upload-matnr is initial.
select single maramatnr msegmenge into (v_matnr, v_zmeng) from
mara inner join mseg on maramatnr = msegmatnr
where mara~matnr = wa_upload-matnr.
if sy-subrc <> 0.
Message E016 with 'material no does not exist'.
elseif v_zmeng LT wa_upload-zmeng.
Message E017 with 'order quantity is greater than the quantity present'.
endif.
endif.
move wa_upload-posnr to i_item-itm_number.
move wa_upload-pstyv to i_item-item_categ.
move wa_upload-matnr to i_item-material.
move wa_upload-zmeng to i_item-target_qty.
move wa_upload-meins to i_item-target_qu.
move wa_upload-werks to i_item-plant.
*move wa_upload-meins to wa_vbap-meins.
*move wa_upload-posnr_tot to wa_vbap-posnr_tot.
move wa_upload-posex to i_item-po_itm_no.
move wa_upload-kdmat to i_item-cust_mat22.
move wa_upload-inco1 to i_item-incoterms1.
move wa_upload-inco2 to i_item-incoterms2.
move wa_upload-zterm to i_item-pmnttrms.
move wa_upload-empst to i_item-rec_point.
move wa_upload-shtyp to i_item-ship_type.
move wa_upload-route to i_item-route.
append i_item.
PERFORM f_fill_schedule_line.
PERFORM f_fill_conditions.
ENDLOOP.
ENDFORM. " f_fill_item
*& Form f_fill_schedule_line
text
--> p1 text
<-- p2 text
FORM f_fill_schedule_line.
move wa_upload-matnr to i_schedule-itm_number.
move sy-datum to i_schedule-req_date.
move wa_upload-zmeng to i_schedule-req_qty.
append i_schedule.
ENDFORM. " f_fill_schedule_line
*& Form f_fill_conditions
text
--> p1 text
<-- p2 text
FORM f_fill_conditions.
move wa_upload-matnr to i_cond-itm_number.
move sy-datum to i_cond-conpricdat.
append i_cond.
ENDFORM. " f_fill_conditions
*& Form f_clear
text
--> p1 text
<-- p2 text
FORM f_clear.
clear:p_auart,
p_vkorg,
p_vtweg,
p_spart,
p_vkgrp,
p_vkbur.
ENDFORM. " f_clear
*& Form f_call_BAPI
text
--> p1 text
<-- p2 text
FORM f_call_BAPI.
clear:i_item,i_partner,i_schedule.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
SALESDOCUMENTIN =
ORDER_HEADER_IN = wa_header
ORDER_HEADER_INX =
SENDER =
BINARY_RELATIONSHIPTYPE =
INT_NUMBER_ASSIGNMENT =
BEHAVE_WHEN_ERROR =
LOGIC_SWITCH =
TESTRUN =
CONVERT = ' '
IMPORTING
SALESDOCUMENT = sorder
TABLES
RETURN =
ORDER_ITEMS_IN = i_item
ORDER_ITEMS_INX =
ORDER_PARTNERS = i_partner
ORDER_SCHEDULES_IN = i_schedule
ORDER_SCHEDULES_INX =
ORDER_CONDITIONS_IN = i_cond.
ORDER_CFGS_REF =
ORDER_CFGS_INST =
ORDER_CFGS_PART_OF =
ORDER_CFGS_VALUE =
ORDER_CFGS_BLOB =
ORDER_CFGS_VK =
ORDER_CFGS_REFINST =
ORDER_CCARD =
ORDER_TEXT =
ORDER_KEYS =
EXTENSIONIN =
PARTNERADDRESSES =
if not ( sorder-vbeln is initial ).
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
write: /'Order number:', sorder.
else.
loop at i_return.
write: / i_return-id, i_return-number, i_return-message(80).
endloop.
*write: /'Error'.
endif.
*loop at i_return.
*write: / i_return-id, i_return-number, i_return-message(80).
*endloop.
ENDFORM. " f_call_BAPIHI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar -
BAPIs to create sales orders for Returns and Debit Memo Request
Hi,
I have to create a sales order for document type Returns as well as a debit memo request.The BAPI 'BAPI_SALESORDER_CREATEFROMDAT2' is giving the following error message for Debit Memo Request document creation as well as for Returns.
761 Unpermitted combination of business object BUS2032 and sales doc. category L
I found BAPIs:
BAPI_CUSTOMERRETURN_CREATE for creating sales document of type ZDRE and SD document category H.
BAPI_DEBITREQUEST_PROXY_CREATE for creating sales document of type ZDDR and SD document category L.
please let me know if anybody have used them. If so what values need to be passed to I_UPLOAD_ID,I_DESTIN,I_SFA_REL parameters of BAPI_DEBITREQUEST_PROXY_CREATE. Are there any alternative solutions using the Salesorder bapi.
I have to create documents based on the flat file data no reference sales document numbers are available.
Appreciate your help..
Good Day
Regards
BhargaviLook at the code done by me
Program Name: *
SAP Name : ZAXXXXXX Version : *
Programmer : Chris Dong of ITDC *
Description : *
Includes : *
Function Modules: XX_XXXXXX *
Transactions : *
Programs : *
REPORT XXXXXXXX LINE-SIZE 80
LINE-COUNT 65
MESSAGE-ID ZA
NO STANDARD PAGE HEADING.
CLEAR l_order_partners.
l_order_partners-partn_role = 'AG'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
CLEAR l_order_partners.
l_order_partners-partn_role = 'WE'.
l_order_partners-partn_numb = '0001202491'.
APPEND l_order_partners TO li_order_partners.
Sales document type
l_order_header_in-doc_type = 'ZDR'.
Sales organization
l_order_header_in-sales_org = '1000'.
Distribution channel
l_order_header_in-distr_chan = '01'.
Division
l_order_header_in-division = '04'.
REF DOCUMENT
l_order_header_in-REF_DOC = '9100000144'.
order reason
l_order_header_in-ord_reason = '925'.
item number
l_order_items_in-itm_number = '000001'.
material no
l_order_items_in-material = '000000000007000012'.
Qty
l_order_items_in-target_qty = '0000000000100.000'.
APPEND l_order_items_in TO li_order_items_in.
*BUS2094 Credit memo request " OSS NOTE 93091
*BUS2096 Debit memo request " OSS NOTE 93091
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA'
EXPORTING
ORDER_HEADER_IN = l_order_header_in
BUSINESS_OBJECT = 'BUS2096'
WITHOUT_COMMIT = ' '
CONVERT_PARVW_AUART = ' '
IMPORTING
SALESDOCUMENT = l_vbeln
RETURN = li_return
TABLES
ORDER_ITEMS_IN = li_order_items_in
ORDER_PARTNERS = li_order_partners
Message was edited by:
Chris Dong
null -
Updating price in already created sales order
Hi all,
I have an issue. When we create sales order, system will display current date pricing on sales order, for example total value of sales order is 9000. Now before delivery, prices change and we have to manually update price on sales order individually. Is there any report available that can update price of all already created sales orders instead of going on sales order and update one by one.
Please respond.
Best Regards,
AI.Hello,
You can update the pricing for all the created orders at a time in VA05 .
Goto Transaction code VA05 and give all the sales orders and then in the MENU click on
EDIT->MASS CHANGE>NEW PRICING
And update the New pricing, then will carry out new pricing for all the sales orders at a time.
OR,
There is also one function module SD_BULK_CHANGE , Create your own Query in SQV1 and make changes.
Hope it will resolve , Please revert if you need further details
thanks,
santosh -
Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed RoshanThank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan
Maybe you are looking for
-
Add-in support on Office 365 click-to-run installed and Office 365 App-V installed
Hi, We have to make a decision on deploying Office 365 via on premise click-to-run, with the Office Deployment tool, or via App-V. But the way add-ins are supported on Office 365 / Office 2013 on App-V 5.0 SP2 is not clear to me. Some Technet sites m
-
I need to download dell drivers to a jumpdrive connected to my iMac. Will this cause problems with my Mac?
-
Hi, Currently we have a custom devoloped Java application deployed in oracle iplanet webserver 7 with JDK 1.6. I am receiving the below errors. The application is not stable. It gives a 500 internal error sometimes when browsing. When i checked the e
-
Renaming files when burning a data disc
Well, with iTunes 4.x, it used to be that when you burned a data disc from iTunes on a Mac, it would rename files with characters that were invalid on other OSes (like "?"). And with iTunes 5.x - NOPE! Now I cannot copy files from my Mac over to iTun
-
Projects thumbnails disappearing?
Using iMovie 08, after I've been working awhile on a project by dragging and dropping clips from the events browser into the projects browser, the thumbnails for the project don't show up. It's a completely grey area in the thumbnails section of the