Doubt in Integration Scenario Configurator- Not able to assing sender chane

Hi All,
i have imported the integration scenario to the Directory.
Assigned the relevant business services to both Sender and Receiver.
I am able to assign a Receiver Communication Channel.
But for sender system communication system , it shows 'Not Required'. i am not able to do anything. Sender is a Third Party System. I have created a sender JMS channel under it.
could someone suggest what is to be done?

If you configured your sender BS and CC correctly it must show..
one try go and create a dummy sender agrement for the same interface check it is allowing there ,,if yes then u doing something wrong in configuaration scenarion.

Similar Messages

  • Integration Scenario Configurator

    Hello!
    I want to generate the receiver determination for an integration process on XI 3.0 SP10 with the Integration Scenario Configurator.
    I have created an Integration Scenario in the Integration Repository, there are no errors when checking with F7.
    If I open it in the Integration Directory and go to Integration Scenario Configurator -> Check Configurability I get the following error message:
    "Component View /Role <my Integration Process>: Only connections with interfaces that belong to the integration process interface are permitted"
    What does the error message mean? What do I need to change to eliminate this error message?
    The connections point to interfaces I have defined in the same software component as the integration scenario and process. For the integration process I have created abstract interfaces.
    Regards, Tanja

    Hi Simon!
    I was able to solve this problem some weeks ago but thanks for your hint anyway.
    As you have mentioned the problem was that in the Integration Repository the integration scenario was not consistent with the used integration process as it  contained a wrong interface.
    After I have corrected the integration process in the Integration Repository and updated the changes in the Integration Directory the generation with the Integration Scenario Configurator worked without any problems and the status of the process changed to 0 in SXI_CACHE.
    Regards, Tanja

  • I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

    I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
    Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

  • Doubt in Integration Scenario

    Hi All,
    I wuld like to know whether  I can  create a Integration Scenario after completing the Configuration steps (eventhough it doesnt make much sense)

    Hi Aarthi,
      Its not mandatory to create the integration scenario.
    The integration Scenario in IR will be useful for re-presenting the whole flow of the interface.
    If you do the itegration scenrio in Design time then you do not need to follow the stpes which is required in configuration like creating Aggrement,determination and all. you just need to import the scenario from integration repository that will avoid configure part.
    Usually during the audit time the auditor checks whether IS is designed or not? as that is the good practive to design ur scenario with IS.
    Companion Guide to Integration scenario
    /people/venkat.donela/blog/2006/02/17/companion-guide-to-integration-scenario
    It will be good loaction to get all the information about whole interface.
    You could either create or transport the same Integration scenario in ID.
    With the use of Integration scenario you could model the whole interface with all minute details
    It comes under best practices. So if you create the IS it will be very easy for you to understand the and designe the business flow. Morevere becomes very easy while creating/configuring the Integration Directory, you just need to import the design objects form IR.
    If you will not create IS, there is no harm. So it all depends upon client and also you.
    Thanks,
    Vijaya.

  • Error in Protocol for Generation of Integration Scenario Configuration

    Hi,
    If I try to generate my Integration Scenario in simulation or real mode I get the follwoing error allways in the "Generation Statistics" section (last entry):
    <b>
    Error when creating or changing configuration objects  0</b>
    If I save it and check it - no errors could be found. Any ideas?
    Regards,
    Christian

    Hi Christian,
    you working with SAP software
    > Error when creating or changing configuration objects 0
    means:
    zero errors...
    Regards,
    Udo

  • Integration Scenario - Component not visible

    Hi all,
    I have two s/w components - say main component and sender component. Both belong to the same product version.
    I have created an integration scenario in the main component and I want to create a swim lane corresponding to 'actions' that are already created in the sender component.
    So, when I choose "Insert application component" in the scenario's swim lane area, and select the product version, it does NOT show the sender component !
    Hence I am unable to include the actions of sender component in the integration scenario.
    I have also checked from SLD that there are few more components (like the sender component) that are assigned to the same product version, but still not visible while creating a swim lane, as mentioned above.
    I have tried the option of clearing SLD data cache, but it didn't help.
    What can be done about this ?
    Regards,

    Hi,
    did you make those software components dependet?
    just like in my weblog?:
    /people/michal.krawczyk2/blog/2005/08/26/xi-are-you-independentfrom-your-dependencies
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

  • Doubt in Integration Scenario Creation

    Hi All,
    My scenario is file to Idoc.Need to create a Integration Scenario. I have stored all the Interface and Mapping objects in teh same Software Component Version (say SWCA). So in Integration Scenario, What will be the Sender and Receiver Software Components. Will SWCA act as both Sender and Receiver or I need ot select SAPR3 for Receiver System.
    And will teh actions be external or internal?

    Hi,
    the SCV is just a compnenet where you will design all the objects, under Integration scenario you will assign the sender and receiver communciation points in integration directory.
    Actions are indicating as the triggering points for sender and receiver interface. If you will be using outside the SCV then it will external and for internal purpose have to select as internal
    Please refer step by step process for IODC to file as well as file to IDOC
    /people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
    Thanks
    Swarup
    Edited by: Swarup Sawant on Jun 11, 2008 4:08 PM

  • XI Error - Integration Scenario Configurator

    When running Step 2 - Assign Services, I choose my Business Service and then Click on Assign, I receive the following error:
    An assignment to a business service must be defined for each business system service. Unassigned business system services exist. These can be removed automatically.
    Has anyone seen this and please detail to me what you did to resolve it?  We are trying to implement E-Recruiting in this particular scenario.
    Thank you!
    John

    Hi John,
    First of all are you doing B2BScenerio,If not in A2A scnerio we can not use Bussiness service.Only Bussiness systems has to be used and you can only assign Bussiness system.
    **Reward if helpfull**

  • My macbook pro os x keeps crashing lately...and not able to even send error report to apple?

    My Macbook Pro OS X keeps crashing lately.  I'm not even able to send the error report to Apple anymore.  What's wrong??

    Visel wrote:
    What's wrong??
    It keeps crashing.
    (Do you really expect other answer if you don't provide any details? And, btw, I don't think Apple accepts crash reports for 10.5 any longer.)

  • Configuration Scenario for BPM Using Integration Scenario

    hi All,
    I Have an Scenario where i am using BPM. Most of the blog tells about manually creating all Configuration objects. I had created an Integration Scenario for this scenario by referring to the earlier threads available for same.
    Hoe to Create Integration Scenario for BPM Scenario
    Integration Scenario in BPM  and few more.
    My IS looks like
    Sender App Component - Integration Process - Receiver App Component
    Now when i am trying to create Configuration scenario for same using model configurator, i am getting Model as "Not Configurable"
    And when i click "Configurability Check" Button, i am getting below as status:
    Component view IS_POC_BPM: Connection from receivePayload to getABSPayload does not have an inbound service interface
    Component view IS_POC_BPM : Connection from sendABSPayload to getPayload has no outbound interface
    getABSPayload and sendABSPayload are actions for Abstract interfaces.
    IS_POC_BPM is the Integration Process Name.
    Also in Integration Scenario, when i create connection between sender action to BPM action there is no inbound interface coming. And viceversa.
    Please help me in identifying if i am doing any thing wrong in creating this scenario.
    Is it possible to create Configuration Scenario for BPM Using Integration Scenario?
    Thanks,
    Mayank
    Edited by: Mayank  Gupta on Apr 21, 2010 6:35 AM

    I think you shoudl refer the available Integration Scenarios created for BPMs in IR --> SAP BASIS --> http://sap.com/xi/XI/System/Patterns
    Sender template will have the Action with Outbound Service Interface and then in the BPM Template the action will have Inbound Interface.....then within the BPM itself this inbound will be mapped to Action with Abstract Interface
    may be after looking the Integration scenarios you will get more idea
    Regards,
    Abhishek.

  • Integration scenario and configuration scenario - is it madatory

    Hi,
    Integration Scenarios are not mandatory, the reason for creating them is given in the blog you mentioned:
    The advantages of defining integration scenarios in the Integration Builder (design tool) are as follows:
    · The integration scenario provides you with an overview of the process and the process flow
    · The integration scenario club together all objects like SWVC,Interface objects, mapping objects,integration processes.You can access all of these objects from the integration scenario.
    · The integration scenario gives you the design time information which is required for its configuration.
    The configurtation items are getting created.
    Regards
    Patrick

    Hi Priya,
       There are two things here.
    1) Create the Integration Scenario in the IR.
    2) Use the wizard to configure the integration scenario in ID.
    The Integration scenario created in the IR acts as a template to create the configuration objects in ID.
    The wizard will create the actual configuration objects only (not just documentation).
    But creating integration scenarios is not mandatory.
    YOu can as well create all the configuration objects manually.
    Generally, you will go for Integration scenarios if you are building a general purpose product (Product based ).
    If it is a project that you are building for a particular customer, you can chose to create the configuration objects using the configuration scenario approach.
    Regards,
    Ravi kanth talagana

  • Integration Scenario's utility in IR/ID ?? & Communication Channel

    Hi All,
    Please clear the following doubt about integration scenario and communication channel.
    1. Is it necessary to create integration scenario in the IR(design) and then to import it in the ID(configuration) ?
       Is it possible to create the integration scenario in the ID without even mentioning the same in the IR ?
    2. During the design phase in the ID we get the option to create the communication channel tempelate, What is the purpose of it ? What if we create the communication channel in ID wihout using the IR option... ?
    Thanks and Regards,
    Mona

    Hi,
    Michal had already answered you questions to the point. I just thought of adding few words..
    Integration Scenario basically helps you to define the integration flow and you can use the same during the configuration> Because of this Ur ID work will be simple. As Michal said this is not mandatory and you can goahead without a Integration Scenario.
    For Eg:
    You think of a development enviorinment that there different consultant for Design and Config. I mean the person who is designing will not be doing the config... In this kind of situation how come the config consultant knows which interface to use where... say for instance if you use BPM it really hard to understand it. So either he needs to have a clear documentation with the clear name before he could do the configuration. The integration scenarios helps a lot in this case... The config guy just have to give few parameters and click next, next and done.
    Thanks,
    Prakash

  • Confusion with PI 7.1 with integration scenario

    Hi, expert,
    I read a lot of documents before I have physically logged on to PI 7.1, I thought I had a very good idea about the new version. However when I am physically in PI 7.1, I found I get a little confused.
    I know ES is a big thing in 7.1, but I will be working on integration (integration scenario), I thought this part is not changed from 7.0 to 7.1. Basically in 7.0, you defined message type and message interface, message mapping and interface mapping, then you go to ID to configure the integration scenario. However in 7.1, you do not have message interface anymore, instead, we have service interface under which you define operations, which is fine from ES perspective. But if I am only interested in integration, what I need is like PI 7.0: outbound interface, mapping, inbound interface, NOT the operation. Now how can I define 7.0 message interface in PI 7.1? (I know operation mapping is 7.0 interface mapping).
    Can I make following understanding?
    1) Operation in 7.1 is like messag interface in 7.0
    2) Service Interface is a tool to group multiple related operations under one roof.
    3) To define integration scenario, I do NOT need the modeling. Modeling is only relevant to model ES, NOT for integration scenario.
    So if I am only interested in integration scenario, what is changed from PI 7.0 to PI 7.1?
    Thanks for advice
    Jayson

    > Can I make following understanding?
    > 1) Operation in 7.1 is like messag interface in 7.0
    Service Interface with one operation whose name is same as the service interface and Xi 3.0 compatible type is same as 7.0 Message Interface
    > 2) Service Interface is a tool to group multiple related operations under one roof.
    Yes.
    > 3) To define integration scenario, I do NOT need the modeling. Modeling is only relevant to model ES, NOT for integration scenario.
    Yes.
    >
    > So if I am only interested in integration scenario, what is changed from PI 7.0 to PI 7.1?
    I did not work much on this area but, as long as you are replacing the interface mapping with operation mapping things must be pretty much same here. For your information, Integration scenario is not a compulsion unless u want to represent the scneario graphically and create the ID objects automatically.
    You can create the ID objects manually whitout creating an integration scenario on ESR.
    VJ

  • Integration Process in Integration Scenario

    Hi All,
    I am trying to create an Integration scenario which can be used at configuration time to create all the config object. But during configuration time, in Assign Services step in Integration Scenario Configurator, it is only showing Business Systems under the product, previously configured in SLD. But i want to use the Imported Integration Process as the sender service. Is it possible?
    Also the Assign Service screen is showing Assign Business System Services for A2A configuration. But we are using B2B configuration sometimes. So is there any way to do this?
    regards,
    Biranchi

    Hi
    Thanks for the reply. The above switch problem is solved. But now I am facing a new problem. I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
    So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
    So please help in solving this problem.
    regards,
    Biranchi

  • Problem for Bapi Call  in Integration Scenario

    Hi
    I am creating an Integration Scenario at Design time which can be used during configuration time.In the Int. Scenario, I am using a Int Process(BPM). I am making a synchronous call to BAPI from my BPM. How can this be implemented in Integration Scenario.
    So how can I send a input message from BPM to BAPI and then take further steps only after getting response from BAPI. Is there any way to define synchronous Action in Int Scenario??? And another point to be noted is that we are not using any communication channel to send the message from BPM or receive the response in BPM. We have only a receiver communication channel which receives the message for the BAPI.
    So please help in solving this problem.
    regards,
    Biranchi

    > Thanks for ur reply. I am trying to follow the suggestion given by u. U have specified that the BAPI  in R/3 system has to be inserted as an application component. But I am unable to do that. I am using IDES system for the BAPI,but in the selection screen for the Application Component we have only instances of installed product in the SLD. So how to find out the application component to be imported.
    >
    What you need to do is, first of all your import the BAPI (RFC) into XI system. (I hope you must be knowing how to import the RFC & IDOCs into XI system). Make sure this BAPI is remote-enabled under attribute TAB in R3 ---> SE37.
    Now this imported BAPI (RFC) will be used in your message interfaces and this message interface will be used inside ACTION. And then you can use this action in your Integration Secnario as mentioned in the picture above in my first reply.
    Sorry for the confusion, you need to R3 business system name rather inserting the BAPI as a business system under 3rd swim lane.
    > And another problem is that I have to create an action for in the application Component containing BAPI and then it should be connected to the action in BPM for interaction. I have created one action for this and given the BAPi as both outbound and inbound interface. Is this the proper way to do this???
    >
    As mentioned above, after you import the BAPI (RFC) in XI you can create the messge interface. There should be two Message Interfaces. One for sending the request and other for receiving the response message.
    Regards,
    Sarvesh

Maybe you are looking for

  • Satellite C855D-S5110 not copyright windows 8

    update error , my system not use windows 8 of Toshiba's Laptop. Please , help me

  • Reading and writing to a text file from an Applet

    I'm a novice java programming with very little formal programming training. I've pieced together enough knowledge to do what I've wanted to do so far... However, I've been unable to figure out how to read and write to a text file from an Applet (I ca

  • How to create schedule job and event trigger in XI to start a ABAP program?

    Dear All: Here are what i need to do: 1.To run a ABAP program to start an XI scenario per hour. 2.To run a ABAP program to start an XI scenario per day at 6 PM. 3.To run a ABAP program used event trigger to make sure that XI scenario has finished the

  • My mac doesn't recognize my ipod.... help!

    I started having problems after I updated to the newest iTunes. I tried to plug in my iPod to update the songs, but when I plugged it in, a message popped up that said that the computer didn't recognize what was connected to the USB. So I went to the

  • Cannot Bring Up A Particular Website

    I have been using www.Cricut.com for years.  A couple of weeks ago I tried to get on the website and cannot do so.  I keep getting "This server is not responding" from Safari.  I have also tried Foxfire and get something similiar.  I even tried anoth