Doubt in SOST and SOSB

Hi Experts,
I am working in SAP 4.6c version.
Requirment:
This is about issuing output for an output type of Sale order and check the email log in SOST and SOSB.
For a sale order, the CSR partner will have an email address maintained. This email address has a respective SAP user ID as well.
Now there are 2 cases for this requirement:
Case1:
For a sale order which has no CSR email and user X is triggering the Sale order output type to receipient Y, then the email will go from X -> Y.
This mail log is seen both in X's SOST and SOSB.
Case2:
For a sale order which has CSR email maintained as Z and user X is triggering the Sale order output type to receipient Y, then the email will go from Z -> Y.
This mail log is seen only in X's SOST, but not in his SOSB.
Also, the mail log is not seen in Z's SOSB.
Case1 is working fine. However can some one please tell me if it is possible to achieve case 2 and see the email in Z's SOSB.
Thanks,
Deepa

Conditions - You want to get the top 10 customers, you can use condition to get the same. done during the execution, before displayign the data. last step in the report execution.
Filters - You can filter only particular plant, customer etc. will be done before query execution, kind of starting point for qery execution.
Btree / Bit map - in addition to Venkatesh said - Bit Map is read optimized and B Tree is write optimized.
Reconstruction - used in 3.x flow. if a request got deleted by request you can retriev it. Go to reconstruction tab and select the request and do reconstruction.
Repair - I guess you are asking repair full request, if it so, it is a way to pull the data from R3. with some selection that can be defined at the info package for example you found one purchase order with some incorrect data, what you do is delete selectively the purchase order from the system and do full repail request. You can define the same at info provider level.
Document update - you change a Purchase order from Me22n, the document will get update in the r/3 backend table EKKO EKPO etc. Statistical update is from the R/3 reporting table perspective, these are LIS tables.

Similar Messages

Doubt in concepts and scenarios where used

doubt in differentiating and scenarios for below.
statistics Vs document update      - i already know the definitions of V1 V2 V3 updates, pls dont give defn links
conditions Vs global filters in QD     and scenarios
btree/bitmap index         and scenarios
reconstruction Vs repair   and scenarios
already searched forums, didnt get satisfactory answer.
pls suggest.
Edited by: Swetha N on Jan 20, 2012 10:10 AM

Conditions - You want to get the top 10 customers, you can use condition to get the same. done during the execution, before displayign the data. last step in the report execution.
Filters - You can filter only particular plant, customer etc. will be done before query execution, kind of starting point for qery execution.
Btree / Bit map - in addition to Venkatesh said - Bit Map is read optimized and B Tree is write optimized.
Reconstruction - used in 3.x flow. if a request got deleted by request you can retriev it. Go to reconstruction tab and select the request and do reconstruction.
Repair - I guess you are asking repair full request, if it so, it is a way to pull the data from R3. with some selection that can be defined at the info package for example you found one purchase order with some incorrect data, what you do is delete selectively the purchase order from the system and do full repail request. You can define the same at info provider level.
Document update - you change a Purchase order from Me22n, the document will get update in the r/3 backend table EKKO EKPO etc. Statistical update is from the R/3 reporting table perspective, these are LIS tables.

Changing fax number of a failed fax in SOST and re-send

Hi all,
The issue is that if a program is firing a fax with a wrong fax number ... the message is recorded as an error in the SOST/B transaction(s).
Now is there any way I can change the fax number of the message in SOST and then re-send it.
Because when I click on re-send it does not give me any options to change any of the message attributes and directly fires the fax.
Please advise.
Regards,
Adi

All the loops (with VERY few exceptions) in Garage Band are in the same key, the key of C.
That's not true! You might get the impression because the standard key of a new GB project is C, so in the preview all loops play in C (unless they have been labeled incorrectly.)
If I remember correctly, the original key was listed in the Loop Browser in previous versions of GB, I can't find it in the current one. But if you listen to a loop in the Finder, you can hear its original version.
This gets important when you have to decide whether to raise or lower a loop. Let's say the loop was recorded in G, you put it in your C major song, and you want it to sound in F. Then you might be tempted to raise it by 5 semitones, because that seems "closer" than lowering it by 7. However, since the original was probably already raised by 5 steps to sound in C, that will result in an overall shift by 10 semitones - probably it sounds weird that way, whereas lowering it by 2 semitones would sound fairly natural.
Of course you can also just trust your ears, but I find that additional information helpful.

Doubt about Scan and Update Catalog Objects That Require Updates link

Hi,
I have a doubt about 'Scan and Update Catalog Objects That Require Updates' link in Administration,
how can I know how many objects that required upgrading before I click this link???
in doc.
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750
section 17.2.4 Updating Catalog Objects
It is said 'You can confirm the need to update by viewing the metrics in Fusion Middleware Control. In the Catalog folder, find a metric called "Reads Needing Upgrade" with description "The number of objects read that required upgrading." '
but I don't find it . my OBIEE version :11.1.1.6.2
conld you pleae help me ??
thank you in advance.

That link should be there in 6 version.
I've verified in 11g6 version doc the same is existing
ref: http://docs.oracle.com/cd/E23943_01/bi.1111/e10541/prescatadmin.htm#BAJDDFFI
BTW:
http://docs.oracle.com/cd/E28280_01/bi.1111/e10541/prescatadmin.htm#BIESG3750is 11g7 version
Thanks,
http://cool-bi.com

A Doubt on Material and Chapter ID Combination

Hello All,
A Doubt on Material and Chapter ID Combination.
We use HALB materials - for procurement as well as manufacturing. It manufactures certain parts in-house and sells them outside. If there is no manufacturing capacity, we procure same parts from outside and then sells them outside.
How do we enter Material and Chapter ID Combination for such items in J1ID ? Their count is 5000+.
In Material and Chapter ID Combination, when we specify "Material Type" for such items as Raw Materials and manufacture them in-house and sell them outside, SAP does not update RG1 register. It updates RG1 register, only when "Material Type" for such items is RG1.
If we specify "Material Type" for such items as RG1, but procure them from outside, SAP does not update RG 23 registers. It updates RG 23 registers, only when "Material Type" for such items is Raw Materials.
Any solution for the above problem ? Creating a separate material code is out of question.
Thanks and Regards,

Hi,
there is no possibilty to have two differant material type for a material, you may assign the material as RG1 and when you procure the goods you can change the material type as Rawmaterial during MIGO/J1iex so that you will be allowed to take the credit and also the RG23 registers will be updated, there is no other possibility.
Regards,
Murali

Doubt about Role and Policy

Hi everyone,
I have a doubt about role and policy,
I'm using OBIEE11.1.1.5, I try to creating role R1 by creating like BIConsumer.
then I go to policies interface,Edit 'BIConsumer' policy,
I find only one role 'BIConsumer' under grantee.
so I'd like to ask why 'R1' is not under policy 'BIConsumer' while R1 has permission like role BIConsumer ???
thanks in advance!

Application policies are sets of java permissions that are associated with a principal which is BIConsumer role in this case which grants permissions necessary to use, or to consume, content created by other users.
So when you try to create like BIConsumer, you are not modifying the existing BIConsumer principal policy( which you should never do) but instead trying to create one similar grants like it.
Usually as long as you are not dealing with BI Publisher, Financial Reporting and Real-Time Decisions application security permissions restriction, you would not have to modify any of these policies and use the default ones.
Hope this helps. Pls mark if it does.
Thanks,
SVS

Doubt in partition and subpartition

hi gems...good afternoon...
I have a doubt redgarding partitioning and subpartitioning...This may be a silly question, but i am really not getting this...please help me..
I have a table which has Range-Hash composite partitioning.
The Range partitioning is on the default tablespace TS_PROD (because I didnt mention any tablespace name in the Range partitions).
The Hash subpartitioning are on the corresponding partition tablespaces (TS_PART1,TS_PART2,TS_PART3....TS_PART6).
I have created total 8 Range partitions and the number of Hash subpartitions are 6 for each of them.
Now when I query the DBA_TAB_PARTITIONS, then I got the desired output i.e. all the Range partitions are in the default tablespace.
When I query the DBA_TAB_SUBPARTITIONS, then also I got the desired output i.e. all the Hash subpartitions are in the separate partition tablespaces.
But when I have inserted data in that table, then I found that both the default tablespace and partition tablespaces are getting filled up.
Moreover, the sum of the increase in sizes of the partition tablespaces is equal to the increase in default tablespace.
I am not getting the concept of this. Where are the datas are getting stored??? In the default tablespace or in the partition tablespaces??
Thanks a lot in advance..

thanks a lot RP for your reply...
and sorry for the late and miscommunication...
Actually i am not so experienced in the DBA line and in my company suddenly my senior DBA left and i am the only one here...I got tensed... :( :(
I have started reading documentation of Oracle, have started the Administrator's Guide first...
Anyways...now i got the concept of the partitioning and subpartitioning i was doing...
The mistake which I was doing is: I was not mentioning the primary key index tablespace and that segment is going into the default tablespace and thats why the size was increasing for both default tablespace and partitioned tablespaces. Because of that fact I was getting confused again and again.
As soon as I mentioned the primary key index tablespace, the size of the default tablespace stopped increasing...
Now the script from which I am getting the size of the tablespaces: (join of dba_datafiles and dba_free_space)
select /* + RULE */ t.tablespace, t.totalspace as " Totalspace(MB)",
round((t.totalspace-fs.freespace),2) as "Used Space(MB)",
fs.freespace as "Freespace(MB)",
round(((t.totalspace-fs.freespace)/t.totalspace)*100,2) as "% Used",
round((fs.freespace/t.totalspace)*100,2) as "% Free"
from
(select round(sum(d.bytes)/(1024*1024)) as totalspace, d.tablespace_name tablespace
from dba_data_files d
group by d.tablespace_name) t,
(select round(sum(f.bytes)/(1024*1024)) as freespace, f.tablespace_name tablespace
from dba_free_space f
group by f.tablespace_name) fs
where t.tablespace=fs.tablespace
order by t.tablespace;
Thanks a lot RP for your help... :)

Doubt on Rows and Coloums in BEx Query Designer.

Hello, Experts.
I have a Doubt in BEx Query Designer.
In the Rows I have a Fiscal year Period, if the user enters the Fiscal year period for e.g. : 001/2006 .
in the columns i have forecast for the Fiscal year period which user entered ( 001/2006 ),   and we have another column pervious ( Prior )fiscal year period ( 001/2005 ).
My Questions is , as we are Restricting with 001/2006 will the query retrieve the values of 2005 or not?
Thanks in Advance .
Sharp

yes i am Doing Offest.
I moved this Fiscal year Period to Free char,   and i Restricted with Pervious Fical Year period and Fical year period . it worked. but
when i kept this in Rows and deleted Previous Fiscal Year period . it is displaying blanks.   in prior years forecast.
is it because i am Ristricting it to only fical year period which user entered
         Colums--> Forcast ( User Entered year )          Prior year
Rows
Fiscal year period
Fiscal year period( user enterd )
Thanks

Doubt in transient and volatile

Hi,
I have doubt in using transient n volatile modifiers
class Test
public static final transient int i=1;
public static final volatile int i=1; //line 1
}If i use final n volatile ,having a comp err like
illegal combination of final and volatile.. line 1..while i dont have any problem with
final transient
I didnt understand the reason..Can anyone pls explain?
Thnx.
Mysha.

this is just off the top of my head, so it might not be strictly accurate, but:
transient has to do with serialization, it means that field won't be serialzed. Of course, for a static final variable, it's I'm not sure, but that could be a redundent modifier, as I'd think the reconstituted class still has whatever it's static final contents are anyway.
volatile has to do with synchronization and access across threads, and since you can't change a final variable's value once initialized, volatile is contrary to what final is saying. So it's either one or the other.

Doubt about Sync and Async process

hi experts i have one small doubt
if we r having the scenario like file to rfc
iam passing the input parameter like material number through file adapter
and then i want to get the material details response from rfc sap r/3 to file system
this is the scenario.
now here which is the synchronous processs
and which is the asynchronous process
please let me know
clear my doubt with explanation please......
thanks
giri

Hi Sesha,
For information on sync/async please refer:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65d4dab39b0398e10000000a1553f6/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/43/65d4dab39b0398e10000000a1553f6/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/83/d2a84028c9e469e10000000a1550b0/frameset.htm</a>
Regards,
Subhasha ranjan
Message was edited by:
Subhasha Ranjan

SOST and SOSC items link to crmd_orderadm_h/ crmd_orderadm_h

Hi I need to check if my items (Shopping Cart, PO, PR) are already queued for sending in SOST. I need to know where to find the Object ID of the item to match with the Object No. in SOST or SOSC. I can use GUID as well. Does anyone know?

/people/thomas.jung3/blog/2004/09/08/sending-e-mail-from-abap--version-610-and-higher--bcs-interface

Doubt with Windows and Oracle Forms 10G and 11g

Hi
I have some doubts in installing Oracle Client on Windows.
a)Can we install Oracle Forms 10g and Reports 10g client on Windows 7?
b)Can we install Oracle Forms 11g and Reports 11g client on Windows XP?
c)If we have an Oracle Forms 11g and Reports 11g, can it connect to a 10g Server?
d)If we have an Oracle Forms 10g and Reports 10g Client, can it connect to an 11g Server?
Please, Can any one help me in this????

a)yes it can be installed on win7, may have some issues on 64bit systems but they're solvable
b)11g had some problems with windows 2000, but didn't see mention of any problems on XP
c)if you mean a database server then yes - i managed to connect 11g to an 8i database, so v10 should not be a problem. If you mean a forms/reports server..well newer forms/reports builder might not want to run old forms/reports and vice versa, but I don't see the point of operating on the same files from different versions. You can still load old form/report source files with a newer builder and recompile them to run on the new server.
d) the "client" is effectively your web browser with a java plugin, unless I misunderstood your question. What version was a form/report compiled with should not be an issue.

Doubt about constructor and show.Input dialog

Hi everybody!
I wrote this program in java. It works, but I have some doubts. The points that are not clear to me are in comments. Thanks in advance:
import javax.swing.JOptionPane;
public class Bicicleta extends JOptionPane{
     int velocidad;
     int cambios;
     String color;
public Bicicleta(){// Why we have to make a constructor without procedures, if we have the constructor public Bicicleta(values) down?
                         //I mean, if we delete this constructor,
                         // the program will not work.
public Bicicleta(int cambiarVelocidad, int cambiarCambios, String cambiarColor){ //without the constructor bicicleta
     velocidad = cambiarVelocidad;                                                            // that is up of this procedure,
     cambios = cambiarCambios;                                                                 // the program will not work, Why?
     color = cambiarColor;
public int getVelocidad(){
     return velocidad;
public int getCambios(){
     return cambios;
public String getColor(){
     return color;
public void setVelocidad(int nuevaVelocidad){
     velocidad = nuevaVelocidad;
public void setCambios(int nuevoCambio){
     cambios = nuevoCambio;
public void setColor(String nuevoColor){
     color = nuevoColor;
public void showBici(){
     this.showMessageDialog(null, "Los valores de la nueva bicicleta son: Velocidad de "+velocidad+" tiene "
     cambios" cambios y es de color "+color);
public Bicicleta getBici(){
     return (new Bicicleta(this.getVelocidad(),this.getCambios(),this.getColor()));
public void setBicicleta(){
     velocidad = Integer.parseInt(this.showInputDialog("Inserte la velocidad de la bicicleta"));
     cambios = Integer.parseInt(this.showInputDialog("Inserte la cantidad de cambios de la bicicleta"));
     color = (this.showInputDialog ("Inserte el color de la bicicleta"));
public static void main(String[] args){
     Bicicleta bike = new Bicicleta();
     bike.setBicicleta();
     Bicicleta nuevaBici; // I copy this segment of code form anyone else, but I dont understand it.
     nuevaBici = bike.getBici();          // Can someone explain it please?
     nuevaBici.showBici(); //
}

The program is supposed to recollect the data with:
public void setBicicleta(){
velocidad =
= Integer.parseInt(this.showInputDialog("Inserte la
velocidad de la bicicleta"));
cambios =
= Integer.parseInt(this.showInputDialog("Inserte la
cantidad de cambios de la bicicleta"));
color = (this.showInputDialog ("Inserte el color de
e la bicicleta"));
So, I think that the values of variables are defined
by the user. So, we dont have to define any previous
data, because it is a input of the program user.
Maybe I?m wrong, so what is my error in this case?Not thinking about responsibilities? So when I go and create a new Bicycle, I have a bicycle with no color and no top speed. Have you ewver seen a bicycle like that? A bycicle that asks you about what color it should have? Shouldn't rather the one creating the bicycle be the one to ask you for the values, and then apply them to the bicycle he creates?
Do the asking first, then call
bike = new Bicicleta(theColor, theSpeed, theGears, whatever);That way you can also get rid of that c'tor you don't want, since it makes no sense anyway.

Doubts about XI and RFC or IDOC

Hello
We have an external system that will send a file with data, with data from that file will have to make some Batch input on a number of transactions and I doubt arises in the orient
The platform of exchange will be XI and I would like if someone could guide me in which are the advantages and disadvantages of undertaking such Batch Inputs through IDOC or through an RFC function or if there is another better way to make this process
Thanks

Hi Alberto.
As far as I understand your scenario, you are fetching the data from a file and update the R3 database using a BDC session.
In that case, my suggestion is to use a custom RFC that takes these records and creates a BDC session. This would be a better way to handle this scenario instead of using any IDOCs.
Regards,
Hari.

Doubt In Quotation and Inquiry

Hi all,
I have a little doubt with regard to quotation and inquiry. Can anybody please explain whether we have pricing in inquiry? in other words does an inquiry document include pricing?
As far as my understanding goes an inquiry is generated by a customer and it should not have pricing for if he would have had the price and the material then what is the purpose of inquiry, he can directly place an order for the material. according to me inquiry is just a request for quotation and just has a need for a material. This inquiry should be followed by a quotation which has the materials qty, the price at which it is available and by when it will be available. After the customer agrees to the price and the conditions in the quotations he places the order.
please correct me if i'm wrong.
Regards
Deepak

Hi Deepak
When customer enquires about some of your product, we create a document for this , means creating an electronic document for it by entering the data for which customer is seeking information.
This document is called Inquiry and it has Pricing data.
With reference to this enquiry we give a Quotation to the customer.Quotation is created in that Sales area where Inquiry is created.
That means , Quotation is from the organisation to the customer from a specific sales area.It is legally binding.
Both Inquiry and Quotation contains Price.
In some industry before creating Quotation they create an Inquiry, as they keep a record of Inquiries for future analysis purpose, beacuse customer has suppose enquired for 5 items but ultimately placed order for 2 items after quotation is given.
He might have refused due high price etc, but he was interested for it that is why he had enquired. So in future, if the price is reduced or new feature is added then he may be contacted.
This is more useful for the Presales department.

Doubt in SOST and SOSB

Similar Messages

Maybe you are looking for