Doubt in Tutorial 6 Webdynpro for ABAP

Dear folks,
               I have been following tutorial 6 in WD4A given in the link,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/28113de9-0601-0010-71a3-c87806865f26?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
.In that TECHED_05S_CUSTOMER_DATA component is not in my system.So i wrote component myself which gives this functionality. i write a method to extract customer data in Component controller ,and i created a view in that component,but still i cant get output when i select line item...means system does not shom me customer data when i click on flight data.Can anyone help me .This is my code of method.
method CUSTOMER_DATA .
data:
    Node_Customer_Data                  type ref to If_Wd_Context_Node,
    Elem_Customer_Data                  type ref to If_Wd_Context_Element,
    Stru_Customer_Data                  type If_Componentcontroller=>Element_Customer_Data .
* navigate from <CONTEXT> to <CUSTOMER_DATA> via lead selection
Node_Customer_Data = wd_Context->get_Child_Node( Name = IF_COMPONENTCONTROLLER=>wdctx_Customer_Data ).
* get element via lead selection
Elem_Customer_Data = Node_Customer_Data->get_Element( ).
select id name street POSTBOX POSTCODE into (Stru_Customer_Data-id, Stru_Customer_Data-name,
                                              Stru_Customer_Data-street, Stru_Customer_Data-POSTBOX, Stru_Customer_Data-POSTCODE)
                                              from SCUSTOM where ID = CUSTOMID.
endselect.
* set all declared attributes
Elem_Customer_Data->set_Static_Attributes(
    exporting
      Static_Attributes = Stru_Customer_Data ).
endmethod.
Nirad

Hi all,
I have written a tutorial that shows how to create the reusable component necessary for tutorial 6.
Please refer to my blog post:
http://scn.sap.com/community/web-dynpro-abap/blog/2012/05/07/web-dynpro-for-abap--fix-for-tutorial-6--component-usage-how-to-create-a-reusable-component
All the best,
Bruno Esperança

Similar Messages

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

Excel File Upload In Webdynpro For ABAP

Hi All,
I have a doubt regarding EXCEL file upload for Webdynpro for ABAP.
I am able to get the path of file using 'FILEUPLOAD' UI element.Now I need to upload the EXCEL file into ALV.I have tried out with GUI_UPLOAD and other excel upload function module.But these Function Module throws Dump.
Can you please suggest how to go about it.It will be a great help if u can suggest any function module or method.

Hi Amita,
Insetad of using GUI_UPLOAD use 'HR_KR_XSTRING_TO_STRING'
Here is the sample code,
TYPES :BEGIN OF str_itab,
              name(10) TYPE c,
              age(10) TYPE c,
             END OF str_itab.
DATA : t_table1 TYPE STANDARD TABLE OF str_itab,
       i_data TYPE STANDARD TABLE OF string,
               lo_nd_sflight TYPE REF TO if_wd_context_node,
                lo_el_sflight TYPE REF TO if_wd_context_element,
                l_string TYPE string,
        fs_table TYPE str_itab,
                l_xstring TYPE xstring,
fields TYPE string_table,
lv_field TYPE string.
DATA : t_table TYPE if_main=>elements_data_tab,
data_table TYPE if_main=>elements_data_tab.
* get single attribute
wd_context->get_attribute(EXPORTING name = `DATASOURCE`
                          IMPORTING value = l_xstring ).
CALL FUNCTION 'HR_KR_XSTRING_TO_STRING'
EXPORTING
in_xstring = l_xstring
IMPORTING
out_string = l_string.
SPLIT l_string AT
cl_abap_char_utilities=>newline INTO TABLE i_data.
* Bind With table Element.
LOOP AT i_data INTO l_string.
SPLIT l_string AT cl_abap_char_utilities=>horizontal_tab INTO TABLE
fields.
READ TABLE fields INTO lv_field INDEX 1.
fs_table-name = lv_field.
READ TABLE fields INTO lv_field INDEX 2.
fs_table-age = lv_field.
APPEND fs_table TO t_table1.
ENDLOOP.
lo_nd_sflight = wd_context->get_child_node( 'DATA_TAB' ).
lo_nd_sflight->bind_table( t_table1 ).
ENDMETHOD.
if correct give correct answer
Thanks & Regards,
Meenachi.R

WebDynpro for ABAP Vs Java

Hi all,
I have recently started learning Web Dynpro for ABAP.
I have worked in WebDynpro for Java.
1)I wanted to understand pros and cons of WebDynpro for ABAP and Java.
2)What are the functionality that are available in Web Dynpro for Java but not in Web Dynpro for ABAP.
3)What should be preferred when considering performance issues - WD for ABAP of Java?
Any Web Log or Link in this context will be helpful.
Thanks a lot,
Rashmi

Hi,
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
see the links below, Understand them and start developing.
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
OOPS in ABAP
oops consept in abap
ABAP with OOPS
http://www.abap4.it/download/ALV.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
http://www.erpgenie.com/abap/controls/alvgrid.htm
OOPS with ABAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=37566
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
http://www.sapgenie.com/abap/OO/
Regards
Srinivas.K
Message was edited by:
Armin Reichert

How to create interactive forms using Webdynpro for ABAP

Hi All,
I have worked on Webdynpro for ABAP, and now I want to start creating adobe interactive forms using Webdynpro for ABAP. Please provide me with basic examples to start.
Also Please provide me introduction as how interactive forms are related to ISR senarios.
Thanks in Advance.
Phani

Hi Varun!,
Can you please send me also the above said step by step tutorial on [email protected]
and can you please also guide me any configurations to be done on Sneak Preview SP12 before developing the interactive forms.
Thank you in advance.
regards
Ravi

Webdynpro for ABAP materials

anyone please send me materials for webdynpro for abap which covers webdynpro architecture like mvc controller and everything

Hi Ganesh,
Welcome to Web Dynpro ABAP !
In web dynpro ABAP we follow MVC(Model View Controller) architecture.
In this object oriented ABAP is used to provide background functionality. Here, your ABAP skills can be utilized to the fullest. Programming in web dynpro ABAP is different than conventional ABAP programming. Here we strictly follow MVC architecture in terms of controller interface. Also there are many wizards available so that we can directly pick the code from wizards.
e.g We can call BAPI through a service call in web dynpro application. Thus automatically backgroud code for BAPI execution will be generated.
To start with Web dynpro ABAP you can try following tutorial:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712
You can start with tutorials and all. There are around six tutorials in SDN library.
Web Dynpro for ABAP
http://help.sap.com/saphelp_erp2005/helpdata/en/a5/1a1e3e7181b60ae10000000a114084/frameset.htm
best tutorials in wbdynpro for ABAP to start with :
https://www.sdn.sap.com/irj/sdn/developerareas/webdynpro?rid=/webcontent/uuid/fed073e5-0901-0010-4eb4-c9882aac7b11 [original link is broken]
1) This is basic Info of WD ABAP
As the name suggests Web Dynpro for ABAP uses exactly the same meta model as its cousin Web Dynpro for Java. A Web Dynpro component, a Web Dynpro view, a Web Dynpro model, a Web Dynpro controller have the same semantics both for ABAP and Java. The main difference is the designtime environment, the development infrastructure and the runtime environment.
The designtime environment is properly embedded in the ABAP Workbench where Web Dynpro artifacts are simply a new category like BSP applications or classical dynpro based applications before. Also no surprises regarding the development infrastructure. The correction and transport system keeps track on all changes that are done, versions them and helps to propagate the Web Dynpro application from development to production like you would do with ordinary BSP or dynpro-based applications.
Last not least the execution platform is the ABAP server that produces application content ready to be integrated in the NetWeaver Portal seamlessly. Features like portal eventing can be used between applications written in ABAP or applications developed with Java.
2 ) I can give you links that can help you a lot.
First of all start doing SAP SDN tutorials .
Create some compenents with BAPI , Component usage and ALV .
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943
/people/marilyn.pratt/blog/2005/12/20/web-dynpro-for-abap
Try to Download demo tutorials from SDN library & Try to search WebDynpro ABAP WebLogs .
Also, SAP has provided you with ample demo example of WD ABAP already bundled with SAP . Just Try out Components starting with WDR . I can tell you few like WDR_TEST_EVENTS ( It shows how every UI elments to use )
See packages like SWDP_DEMO , SALV_WD_DEMO
there are many more .
Hope I have helped you .
Cheers,
Darshna.

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

How to create a node with attributes at runtime in webdynpro for ABAP?

Hi Experts,
         How to create a node with attributes at runtime in webdynpro for ABAP? What classes or interfaces I should use? Please provide some sample code.
I have checked IF_WD_CONTEXT_NODE_INFO and there is ADD_NEW_CHILD_NODE method. But this is not creating any node. I this this creates only a "node info" object.
I even check IF_WD_CONTEXT_NODE but i could not find any method that creates a node with attribute.
Please help!
Thanks
Gopal

Hi
   I am getting the following error while creating a dynamic context node with 2 attributes. Please help me resolve this problem.
Note
The following error text was processed in the system PET : Line types of an internal table and a work area not compatible.
The error occurred on the application server FMSAP995_PET_02 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: IF_WD_CONTEXT_NODE~GET_STATIC_ATTRIBUTES_TABLE of program CL_WDR_CONTEXT_NODE_VAL=======CP
Method: GET_REF_TO_TABLE of program CL_SALV_WD_DATA_TABLE=========CP
Method: EXECUTE of program CL_SALV_WD_SERVICE_MANAGER====CP
Method: APPLY_SERVICES of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: REFRESH of program CL_SALV_BS_RESULT_DATA_TABLE==CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE_DATA of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~MAP_FROM_SOURCE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMP_TABLE_DATA~UPDATE of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_VIEW~MODIFY of program CL_SALV_WD_C_TABLE_V_TABLE====CP
Method: IF_SALV_WD_COMPONENT~VIEW_MODIFY of program CL_SALV_WD_A_COMPONENT========CP
My code is like the following:
TYPES: BEGIN OF t_type,
            CARRID TYPE sflight-carrid,
            CONNID TYPE sflight-connid,
         END OF t_type.
Data: i_struc type table of t_type,
dyn_node   type ref to if_wd_context_node,
rootnode_info   type ref to if_wd_context_node_info,
i_node_att type wdr_context_attr_info_map,
wa_node_att type line of wdr_context_attr_info_map.
      wa_node_att-name = 'CARRID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CARRID'.
      insert wa_node_att into table i_node_att.
      wa_node_att-name = 'CONNID'.
      wa_node_att-TYPE_NAME = 'SFLIGHT-CONNID'.
      insert wa_node_att into table i_node_att.
clear i_struc. refresh i_struc.
select carrid connid into corresponding fields of table i_struc from sflight where carrid = 'AA'.
rootnode_info = wd_context->get_node_info( ).
rootnode_info->add_new_child_node( name = 'DYNFLIGHT'
                                   attributes = i_node_att
                                   is_multiple = abap_true ).
dyn_node = wd_context->get_child_node( 'DYNFLIGHT' ).
dyn_node->bind_table( i_struc ).
l_ref_interfacecontroller->set_data( dyn_node ).
I am trying to create a new node. That is
CONTEXT
- DYNFLIGHT
CARRID
CONNID
As you see above I am trying to create 'DYNFLIGHT' along with the 2 attributes which are inside this node. The structure of the node that is, no.of attributes may vary based on some condition. Thats why I am trying to create a node dynamically.
Also I cannot define the structure in the ABAP dictionary because it changes based on condition
Message was edited by: gopalkrishna baliga

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Not able to integrate Payment Gateway with WebDynpro for ABAP

Hi,
   I am not able to integrate the Payment Gateway for Billdesk ( third party software) with Webdynpro for ABAP.
Summery of the Issue : -
(*) Data from PORTAL Application to PAYMENT GATEWAY is going Correctly but
(*) Data from PAYMENT GATEWAY to PORTAL Application is not going correctly.
Details about the Problem : -
   I have created 3 View in Webdynpro Application for ABAP.
View 1 -> Sales Order
View 2 -> Confirm Order
View 3 -> Success Message
When I am on the View 2 i,e Confirm Order, I have a UI Element ( LINK TO URL) on this View. When I click on the Link it successful takes me to the Bill desk site(Payment Gateway Integrator).After selecting the Card Type - > Master card, or Visa or Amex, I am routed to the Gateway Site of the Citibank, Where I have to enter the CARD details like Card Number, CVV Number, Expiry Date, and press the Submit Button.
Which now takes me to the final confirmation site, stating
1) Order Number
2) Bank ID
3) Merchant ID
4) Amount
5) Authorize ( APPROVED / NOT APPROVED)
Now once i click on the Submit button, It transfers the amount of the Customer to my bank account, correctly and goes back to the my portal application.
Till here it is working correctly, but 1 parameter is missing which is called "msg", and this parameter contains important information regarding the payment. This parameter is sent back form the Gateway Site to my Portal.
1) Authorize STATUS
2) Check Sum
etc... which will be finally required to decided whether I should go on to create the Sales Order for the Customer or not.
If the Authorize Status = '0300' then only create the Sales Order other wise if the status is any thing else lets say not equal to '0300' then gives the message that the Credit Card is not authorize to process the Sales Order.
Regards,
Saurabh Bhatnagar
E : [email protected]

Dear Sir,
we are implementing Retail POS (Point of sale) for one retail company. We need to integrate third party payment gateway.
it's name is PLUTAS. We have got developer kit from Plutas (For trial ) . we have installed that kit in our system.
In my program, I am triggering " PL_TriggerTransaction" using call method. After triggering method it executes method, control passes to third party software. But I am not able to catch return parameter (Responce).
So that would be great if you help me out with this issue.
I wrote following code.
REPORT ZTEST678.
INCLUDE OLE2INCL.
data : rc_plutus type ole2_object,
lpszTransData type string,
lTxnType type char4,
lpszTransData1 TYPE string,
ret_string TYPE string,
l_count TYPE i,
l_time TYPE sy-uzeit.
rc_gui type ref to CL_GUI_CONTROL.
lTxnType = '4001'.                        "----
transaction type
lpszTransData = '1234567'.          " -
trasaction data
*create object rc_gui.
create object rc_plutus 'PLUTUSEXCHANGE.EXCHANGEOBJ'(001) no flush. "no flush ."queueonly.
call method of rc_plutus 'PL_TriggerTransaction'(002) = lpszTransData1
exporting
#1 = lTxnType
#2 = lpszTransData.
wait up to 20 seconds.
write: ret_string.                        " <----
Value is not coming
write: lpszTransData1.            " <----
Value is not coming

How to create an editable table in webdynpro for ABAP? Help!

Hi Experts,
I have a requirement where I have to create a webdynpro for ABAP table for new row/rows entry, delete row/rows and update row/rows data. This is something like table control in normal ABAP.
how can I achieve this? Is there any such feature in ALV component?
Any code sample will be really helpfull.
Please help!
Thanks
Gopal

Hi,
yes, the ALV is integrated into WDA, have a look at this: http://help.sap.com/saphelp_nw2004s/helpdata/en/74/fd4142646ab46be10000000a155106/frameset.htm
Regards, Heidi
PS: look at the WDA Knowledge Center under https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/library/uuid/02e1fa45-0801-0010-10a0-f1cf47e8c943, there you can find several ALV tutorials
Message was edited by: Heidi von Geisau

Display HTML code in WebDynpro for ABAP

Hi, I would like to display a html page in a WebDynpro View, ie: I have the html code in a "string" variable and would now display this string now not with the html tags visible, but as a "real" html page.
I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
Thanks

>I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
I'm a little bit confused by this statement. Do you mean you found a thread in Web Dynpro Java, perhaps?
Regardless the approach is possible using the iFrame UI. The warning about the iFrame is that it is deprecated in NetWeaver 7.0 and 7.01 and my not be usable depending upon your support package level. However in NetWeaver 7.02 the iFrame returns to fully supported status.
If you have the HTML content in a string, you can simply place it into the ICM cache. This will provide a temporary URL for the content (you supply the lifetime of the URL) that can be referenced via the iFrame URL or even the LinkToURL if you want to open in a new window.
Here is the code for placing the string into the ICM Cache:
****Create the cached response object that we will insert our content into
data: cached_response type ref to if_http_response.
create object cached_response
    type
      cl_http_response
    exporting
      add_c_msg        = 1.
try. " ignore, if compression can not be switched on
      call method cached_response->set_compression
        exporting
          options = cached_response->co_compress_based_on_mime_type
        exceptions
          others = 1.
    catch cx_root.
endtry.
****set the data and the headers
data: l_app_type type string.
      cached_response->set_cdata( lv_html_text ).
      l_app_type = 'text/html'.
cached_response->set_header_field( name = if_http_header_fields=>content_type
                                     value = l_app_type ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 60 ).
data: guid type guid_32.
call function 'GUID_CREATE'
    importing
      ev_guid_32 = guid.
concatenate '/sap/public' '/' guid '.' 'html' into lv_iframe_url.
****Cache the URL
cl_http_server=>server_cache_upload( url      = lv_iframe_url
                                       response = cached_response ).
wd_context->get_element( )->set_attribute(
    name = `IFRAME_URL`
    value = lv_iframe_url ).

Article: Screen Conversion in WebDynpro for ABAP

Hi all,
       I want to share with you my first article that i posted in SDN. Looking for your valuable comments...
Click the below link to read by article. Thanks.
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/screen%20conversion%20in%20web%20dynpro%20abap.pdf">Screen Conversion in WebDynpro for ABAP</a>
Some of the links in the article are not accessable from the article. The links are given below.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712">Getting Started with Web Dynpro for ABAP</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/content.htm">Wizard</a>
[url=http://help.sap.com/saphelp_erp2005/helpdata/en/73/e5e6418b7eca17e10000000a155106/content.htm]Restrictions[/url]

HI Hema,
What i understood from u r query is u want 2 refrsh all ui elements data.
u can read data from the respective nodes and clear those data.
Example: I want to delete contents of an ui element on the screen( FULL_NAME ).
create a buuton REFRESH on the screen and assicn a action to that button.u wil get a method with that action.write this follwing code in tat method.
method ONACTIONREFRESH_UI .
    DATA lo_nd_processedby TYPE REF TO if_wd_context_node.
    DATA lo_el_processedby TYPE REF TO if_wd_context_element.
    DATA ls_processedby TYPE wd_this->element_processedby.
    DATA lv_full_name LIKE ls_processedby-full_name.
navigate from <CONTEXT> to <PROCESSEDBY> via lead selection
    lo_nd_processedby = wd_context->get_child_node( name = wd_this->wdctx_processedby ).
get element via lead selection
    lo_el_processedby = lo_nd_processedby->get_element( ).
get single attribute
    lo_el_processedby->get_attribute(
      EXPORTING
        name = `FULL_NAME`
      IMPORTING
        value = lv_full_name ).
clear lv_full_name.
CALL METHOD lo_el_processedby->set_attribute
EXPORTING
    value = lv_full_name
    name   = `FULL_NAME`
endmethod.
reward if it is use ful

Dynamic form in Webdynpro for ABAP - Context Cardinality question

Hello -
I have an adobe form in a webdynpro for ABAP application which I want to be able to be dynamic. Basically I want to be able to use a Webdynpro context node with a cardinality of 1-N and the form will take each node of the context and create a page for each one. I am able to do a static form with a context node that has a 1-1 cardinality, but once I change my cardinality to 1-N on the node the static form no longer works (there is no data). Is what I want to do possible? I've looked through all the documentation I could find and could not get a definite answer. Any help would be appreciated.
Widget (1-N)
     -Widget_info (1-1)
          *Name
          *Sku
          *Description
     -Widget_plant (1-M)
          *Plant_Code
          *Plant_State
          *Plant_City
     -Widget_pic (1-1)
          *Picture
... So I want to have a form which can print a page for each widget in the context (the number of which can vary). That form would have the Name, sku, description, plant_code, plant_state, plant city and the picture on it. (This is just a generic example of what I need to do)
Regards,
- Jason

Ok, I think I found a bug... It seems for adobe forms in WD4A, the root context node must be 1-1 and you must nest the 1-n node within that... Not sure why, but it worked. So in my case my context would look like this:
FOO_NODE (1-1)
     Widget (1-N)
          -Widget_info (1-1)
               *Name
               *Sku
               *Description
          -Widget_plant (1-M)
               *Plant_Code
               *Plant_State
               *Plant_City
          -Widget_pic (1-1)
               *Picture

Creating attachment in Webdynpro for ABAP

Hi Expertrs,
I am new to webdynpro for ABAP. I have a requirement like I need to create an attachment in webdynpro screen. I have searched the forums and I got the class CL_GOS_SRV_ATTACHMENT_CREATE and method EXECUTE_ITS. but when I call this method I am getting dump in the method.
Can anybody please suggest me how to create attachment in webdynpro for ABAP?
When ever attachment is created and clicks on save button workflow will be triggered and a workitem appears portal when ever the user click on the display attachment I need to display the created attachemnt.
Please suggest me.
Thank You.
Ranganadh

Hi,
Please follow the steps below;
Follow these steps;
1.create a node 'FILEUPLOAD' with 2 attributes
a) FILECONTENT type XSTRING
b) FILENAME type STRING
2. Create a fileuplaod uielement
a) bind the data property with attribute 'FILECONTENT'
b) bind the filename property with attribute 'FILENAME'
3. Create a button 'UPLOAD'
a) create the action method for this button
Paste the following code in this method
Data l_node type ref to if_wd_context_node.
Data l_stru type wd_this->elements_cn_fileupload.
l_node = wd_context->get_child_node( 'FILEUPLOAD' ).
l_node->get_static_attributes( importing static_attributes = l_stru ).
"save l_stru-fielcontent in database. Your file will be saved in the database in XSTRING format.
Now when you want to display this file;
1. Create a Node 'FILEDOWNLOAD' with 1 attribute
a) FILE type XSTRING
2. Create a filedownload uielement
a) bind the data property with the attribute 'FILE'
Fetch the file from databased and set the File attribute of teh filedownload uielemnt to display the file.
Hope this helps!
Radhika.

Doubt in Tutorial 6 Webdynpro for ABAP

Similar Messages

Maybe you are looking for