Doubt on configuration in MI Client

Hi,
Is possible customize the principal screen in MI Client ?
And... I'm trying configure the MobileEngine.properties with the configuration
MobileEngine.JSP.HomePage.DisplaySettingsLink=false
and don't works.
Any idea?
Regards,
Bruno

Hi Bruno
Is possible customize the principal screen in MI Client ?
Apart from changing the images on the MI Client, it is not possible to customize any of the MI JSP Pages. For changing the images refer to my reply in thread Re: MI client homepage log change in MI 7.0
The configuration menitoned was introduced in MI Client 2.5 and 7.0 with SP19 and SPs 10 respectively. If your client is in a SP lesser than the mentioned SP above, this configuration will not work. So make sure you are on either SP19 or SPS10 or above and this will definitely work. Hope this helps.
Best Regards
Sivakumar

Similar Messages

Message-Pls wait while Windows configures SAP B1 Client

Hi,
While logging in to SAP B1,system is displaying a msg 'Please wait while Windows configures SAP B1 Client.' Same msg is displayed while connecting to DTW as well. Then it takes a few minutes to connect . What could be the reason? Will the uninstallation and reinstallation of SAP B1 client solve the problem? Since the license file has been imported , is it recommended to uninstall the SAP B1Client. This msg appears while logging in from client machines as well as Server machine.
We are working on SAP B1 8.8 PL 10 ,Localization India.
Please guide me.
Sudhir Jadhav

Hi,
the message in the DTW can be removed by reinstalling the DTW. You can also do the same for B1 client. If this message appears only in the server's B1 client application, you can do there. If it is also happened in the user PC, you must also reinstall it.
JimM

How to Download Configuration in Golden Client

Hi All,
How to Download Configuration in Golden Client.
Please help me in this regards.
Regards
Deekshitha.

Deekshitha,
All the configuration you have made will be assigned to a customizing request. You can view these requests in transaction SE10.
You will have to first release these requests (only the ones you require). Then the basis settings for your system will define to which client these request will move.
When requests are transported, all the related config will move to other systems.
Please contact your basis team as this is a very important process.
Thanks,
Srihari

Doubts on Configuring Search

Hi All,
I am new to knowledge Management and have some basic doubts regarding Configuration of Search(TREX).
Suppose i assume that, i have all documents in KM repository, well configured in Content Management and my TREX server is running..
Then, i create an INDEX and also assign the Data Source to that index.
Is this enough to configure Search or do i need to continue with creating Taxonomy and Classification?
If not, what is the sole purpose of Taxonomy and classification?
Thanks in advance.
Vijay.K

Hi,
Yes, It's enough.
You use taxonomies in order to classify your documents.
Documents are assigned to categories in a taxonomy. Each category only contains documents that have similar contents or that are related to the same topic. The categories in a taxonomy form a hierarchical ordering of terms.
To use taxonomies, you must create an index (Index Administration), then you have to assign it a data source (km folders that you want to classify). At last you create your taxonomies. Remember that there are two kind of taxonomies: Query Based and Example Based.
In this link you can find a good explanation:
http://help.sap.com/saphelp_nw04s/helpdata/en/bf/a179fbd15211d6b2c700508b6b8a93/frameset.htm
The documents included in the taxonomies are pointed by the data source in your index.
System Administration-Monitoring-KM-Trex Monitor-Display Queue Entries- Choose your Index, and then you can see all documents indexed with theirs status.
Patricio.

How do I configure my Windows clients to talk to Mac OS X Server 10.6

We had a MacAuthority technician install the server software for us, but he did not configure the Windows clients to talk to the server. I have tried several approaches, all evidently wrong. Everything I have read says the Windows clients need "open directory" passwords, and he has set them up as "shadow passwords". Heaven only knows what else is messed up. Please someone step me through this -- I will set them up as new users and see if I can make it work that way.

What sort of a resulting configuration or environment are you seeking?
If you're looking to have your Windows clients access storage on your OS X Server and to not authenticate with your OS X Server system, then you can dispense with some of the configuration steps.
However if you're looking to have the same login everywhere (Windows and OS X), then requirements become somewhat more complex.
And which version(s) of Windows? Particularly if you have Windows 7, the options and requirements differ.
It's less common to have Windows configured to authenticate to OS X; it's more common to use Windows Server and its Activie Directory, either in isolation or in combination with an OS X Server in what's called a "magic triangle" configuration. Alternatively (if you do want to set up this direct authentication of Windows and OS X Server and Open Directory), then see Mac OS X Server: Alternatives to Windows NT 4.0 domain control (PDC) technology (HT4945); that uses pGina.
And before you proceed here with any work involving authentication, delegation or related tasks, launch Terminal.app from Applications > Utilities folder, and issue the following non-destructive command to verify your DNS is correct:
sudo changeip -checkhostname
You'll need to specify an administrative password when prompted. Proper local DNS services are central to getting any of this stuff to work, and this command will (non-destructively) indicate if DNS is correct or if there are issues or changes needed.
The OS X Server 10.6 documentation is available from Apple, and that can help provide you with some background in this topic. The 10.6 intro, 10.6 User Management, and 10.6 Open Directory would likely be worth downloading and skimming. Probably also 10.6 File Services, if that's part of your goal. (Running a server isn't quite as no-IT-required as might be hoped, unfortunately. And I don't know of a short cookbook for this stuff; the steps and configurations can vary, depending on your local requirements - apologies on pointing to the docs here.)

Configure listener in client machine

hello guys, please any help on how to configure listener on client machine??
any link i can read or tutorial i'll be thankfull

Hi,
This question may be more appropriate for the Installation forum. However, the short answer is that you do not need a listener on any client machine, only on a server machine. Good luck!

Distribution Point Configuration Status - SMS Client - Restart might required

SCCM 2012 was updates to SCCM 2012 R2. After that Management Console display for one of servers in Monitoring section - Distribution Point Configuration Status: SMS Client - Restart might required - In Progress. This DP was restartred but status "In
Progress" stay.
Distribution point works fine but status is confuses me.
How delete this status? Where can I delete dp status from SQL server?

Check the database to find any DP with the InsStr2 value is 3010. Here are the steps for your reference. > Make sure you have good backup of the site DB> Run the following select statement to find the Distribution Points in this state:
select * from dbo.DistributionStatus where InsStr2 = '3010'
> Once identified then Delete a record an affected DP with:
delete from dbo.DistributionStatus where ID = <DPID of affected DP identified by above command>

Configuration manager 2012 Client Deployment settings.

GPO to push config mgr client
i have added The Configuration Manager templates in GPO
Under Configure Configuration manager 2012 Client Deployment settings.
I have enabled it and what is the command line here
CCMSetup.exe SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
or
SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
or
CCMSetup.exe /MP:sccm.mydomain.com /logon SMSSITECODE=COD SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com
or
/MP:sccm.mydomain.com /logon SMSSITECODE=COD SMSSLP=sccm.mydomain.com FSP=sccm.mydomain.com

You can use the following:
CCMSetup.exe
SMSSITECODE=COD FSP=sccm.mydomain.com MP=sccm.mydomain.com
http://prajwaldesai.com/deploying-configuration-manager-2012-r2-clients-using-group-policy/
http://methmal132.wordpress.com/2013/02/13/how-to-push-the-sccm-agent-via-gpo/
Regards, Ibrahim Hamdy

Doubt on configuration....!!!

Dear Friends,
Pls clarify my below doubt's
1. Do I need to configure sender XI adapter & sender agreement when my sender is a ECC system sending proxy message?
2. I have configured Business system for differnt clients of ECC and at runtime if both the system sends a same message type to XI, based on the logical & technical system details XI can know which BS has sent that message, but in case of two Business Service sends same message type, how will XI know which BS has sent message?
Thanks for your help....! ! ! ! !......!

Hi,
>>Reg my second question I am using webmethods as a sender. So I have configured two Business system for two different webmethods system. So if the both the webmenthods systems sends the same message type can XI know which system the message has been sent...?
If you have a business system for each of the webmethods then yes.
>>Also in case of receiver/server proxy, I need to configure receiver channel and receiver agreement... can I have two different receiver Proxy sytems by configuring different receiver channels and assigning to the respective scenario....??
Yes you need them and you can have two different systems as receivers.. there you need to specify the parameters in the XI communication channel
>>I assume that there is not need of creating sender channel & agreement when the sender system post message directly to integration server of XI... for ex when webMethods posts message directly to XI which is similar to ECC posting proxy message.... Please correct me if i am wrong....
yes you dont need them.. but i have a basic doubt.. why are you posting it as proxy, cant we have a normal HTTP post?
Regards
Suraj

How to configure sap maxdb client to connect to SAP ERP system (SAP HR)

Hello all,
I am currently installing live cache for SAP ERP HR application(Idoc), can anybody tell me the sequence to proceed to configure SAP livecache with SAP ERP system. i am doing following steps
1. Install SAP DB using installation MAXDB CDs
2. Install SAP Livecache and standalone server SCM 5.0 using SAP ERP master and Livecache dvds.
3. install Livecache client fromSAP ERP master and livecache dvds between SAP ERP and livecache server.
4. configure in LC10, tcode.
but when i press on livecache monitoring in LC10 it gives me following error.
Command: DBMRFC
Parameter: -gsapfive -xsapgw00
SY-SUBRC: 8
Return Code
sap maxdb client

i tried the said things and after that i am getting following error in DB59, first three steps are successful but 4 one is failing.
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: <hostname>_<SID>_00                           ( Windows NT )
1. Connect. test with "dbmcli db_state"                         Successful
2. Connect. test with command mode "dbmrfc db_state"            Successful
3. Connect. test with session mode "dbmrfc db_state"            Successful
4. Connect. test with "native SQL" ( LCA )                     No connection
   SQL Code: 4008
    POS(1) Unknown user name/password combination
   For detailed information, see the developer trace for work process:            1
please see trace from file dev_rfc and dev_w0 below
log for dev_rfc
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: MKUMAR (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
Log from dev_w0
A RFC 1485 CONVID 47150684i tried the said things and after that i am getting following error in DB59, first three steps are successfuk but 4 one is failing
trace from file dev_rfc is below
**** Trace file opened at 20110107 174356 Eastern Standard Time, SAP-REL 701,0,14 RFC-VER U 3 1016574 MT-SL
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: SAPLARFC (Transaction: )
User: ABC (Client: 800)
Destination: IDOCTEST (handle: 2, , )
SERVER> RFC Server Session (handle: 1, 45030386, {9BAF1AE0-E29B-F1A3-9406-0019B9E204CC})
SERVER> Caller host:
SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
SERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =IDOCTEST
HOST =%%RFCSERVER%%
PROG =IDOCTEST
A RFC 1485 CONVID 47150684
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: abc (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47149684, {FDB31AE0-D203-F1C0-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
M
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host <HOSTNAME> / sapgw00
M * ERROR       program IDOCTEST not registered
M *
M * TIME        Fri Jan 07 18:15:25 2011
M * RELEASE     701
M * COMPONENT   SAP-Gateway
M * VERSION     2
M * RC          679
M * MODULE      gwr3cpic.c
M * LINE        1778
M * DETAIL      TP IDOCTEST not registered
M * COUNTER     715
M *
M *****************************************************************************
M
A RFC 1485 CONVID 47152747
A   * CMRC=2 DATA=0 STATUS=0 SAPRC=679 ThSAPOCMINIT
A RFC> ABAP Programm: SAPLARFC (Transaction: )
A RFC> User: ABC (Client: 800)
A RFC> Destination: IDOCTEST (handle: 2, , )
A RFC SERVER> RFC Server Session (handle: 1, 47151731, {FDB31AE0-D203-F1C1-9406-0019B9E204CC})
A RFC SERVER> Caller host:
A RFC SERVER> Caller transaction code: (Caller Program: SAPLQOWK)
A RFC SERVER> Called function module: ARFC_RUN_NOWAIT
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Mani

Solman_setup configuration for local client copy

Dear Experts,
We made a client copy from 100 to 110 in solution manager 7.1,But solman_setup configuration is missing. how we can copy the java solman_setup configuration also?

Hi Prathish,
always welcome.... but I hope you have understood now that solman doesn't support multi client concept.
There is nothing wrong technically to create a new client but you need to know which functionalities/module within solman support client dependent or client independent configuration
for e.g Monitoring Template are not client specific ..check below FAQ link
Monitoring and Alerting related FAQ - Technical Operations - SCN Wiki
hope this helps your understanding further...
Thanks
Prakhar

Pre-Configured Cisco VPN Client install

Im looking at creating a pre-configured install for the 4.8 client. This normally involves editing cab file contents?? I've been unable to locate a 'how 2' guide for this, does anyone have any ideas, has anyone tried this before, can it be done???

Have located this:
http://www.cisco.com/en/US/customer/products/sw/secursw/ps2308/products_configuration_example09186a008022f999.shtml
but im looking to add security credentials (group and PSK) to the install, can i just swap the configured files within the MSI??

Configuring AAA network client on ACS v5.1 using the same RADIUS atributes from ACS v3.3

Hello,
I was wondering if i should use the same RADIUS VSA attribute on ACS v5.1 to authenticate AAA clients as those i was using on my old ACS v3.3 server.
Exemple : under ACS v3.3 i was using RADIUS (Cisco Aironet) attribute to authenticate AP & WLC, should i do the same under ACS v5.1 ?
Best regards.

Hello,
When defining AAA client on the new ACS 5.x server you just select TACACS+ or RADIUS. We no longer define the RADIUS "vendor"/"VSA" when creating the AAA Client entry. All AAA client would be defined as RADIUS or TACACS+ only.
If you were using specific VSA Attributes then you need to send those attributes back configuring Authorization Profiles on the ACS 5.x. You will find the specific VSA attributes there. Refer to the following screenshots:
And here are the available attributes for the ACS for RADIUS Aironet:

Configuring AAA network client on ACS v5.1 using the same atributes from AC

Hello,
Actualy i'm new to use ACS v5.1 and i wanted to do the same AAA client configuration as it was configured on my old ACS V3.3 server.
My old ACS v3.3 AAA clients type are WLC, LAP and Autonomous AP (using RADIUS (Cisco Aironet)) authentication protocol, PIX & a Router (using TACACS+ (Cisco IOS)) authentication protocol.
I'm using PEAP_MS-CHAP v2 as a RADIUS authentication method.
Can any one guide me to accomplish this configuration please ?.
Best regards.
Posted by WebUser Mourad Lafjer

Hello,
When defining AAA client on the new ACS 5.x server you just select TACACS+ or RADIUS. We no longer define the RADIUS "vendor"/"VSA" when creating the AAA Client entry. All AAA client would be defined as RADIUS or TACACS+ only.
If you were using specific VSA Attributes then you need to send those attributes back configuring Authorization Profiles on the ACS 5.x. You will find the specific VSA attributes there. Refer to the following screenshots:
And here are the available attributes for the ACS for RADIUS Aironet:

TMS configuration - Transports between clients

Hi Experts,
I have an ECC system on which I would like to configure 3 clients. Client 400 for DEV, client 500 for QA, and client 600 for PRD.
I would like to configure TMS so that I will be able to transport directly from 400 to 500 and from 500 to 600.
Could anyone tell me if this is possible and (if so) how it should be done? Could you take me through the process?
Many thanks,
Aldo

Aldo
If you drill down further in the above link, you may find what you are looking for:
http://help.sap.com/erp2005_ehp_03/helpdata/EN/44/b4a09a7acc11d1899e0000e829fbbd/frameset.htm
title
u2022 Improved import controls
If you work with extended transport control, you can import requests into different clients in a system without using unconditional modes.
When you first import a request into a system, all the objects are imported completely. Any subsequent imports into other clients in the system only import client-specific components.
This makes it possible to set up consolidation routes and delivery routes between different clients in the same system.
Hope this helps!
PJ

Doubt on configuration in MI Client

Similar Messages

Maybe you are looking for