Doubt on mm01 using bdc

hi ,
i have done bdc recording for mm01 and mm02 for creating or updating material number into sap system .. there is a column called division in legacy system for that column division three values are there. they are 009,004,001.. they might have created classification view for division 009 materials.
how to find if there is any classification view created for division 004 materials .
now i was asked to create classification view for 001 and 004 division materials ...
can u help me please .. i am new in abap

hello sir,
thanks for ur reply.
i have done bdc recording for mm01 and mm02 for creating or updating material number into sap system .. wat i need to find is that there is a column called division in legacy system for that column division three values are there. they are 009,004,001.. they might have created classification view for division 009 materials.
now i was asked to create classification view for 001 and 004 division materials ...
also how to find if there is any classification view created for division 004 materials .
can u help me please .. i am new in abap

Similar Messages

Problem copying/extending materials (MM01) using BDC

Hi,
I am developing a program that will be used to copy/extend material from one plant to another plant by using BDC. When i did it manually in MM01, i selected 8 views (Purchasing, MRP1, MRP2, MRP3, MRP4, General Plant Data/Storage 1, General Plant Data/Storage 2, Accounting 1 and Accounting 2) and marked the "Create views selected" checkbox. Then, the system prompted me for the plant and storage location information (copy from & copy to). After that, the Purchasing view appears and i would just need to click the "SAVE" button and the new material was created.
When i ran the BDC program (by selecting the "Call Transaction - Show all screens" option), i found that i had to run it four times to have the material created. Basically, i found that it went through four views which were purchasing, MRP, General Plant Data / Storage and Accouting view.
I was wondering why it didn't create the selected views for me although i had recorded the "Mark the 'create views selected' option" in the BDC?
Thanks much in advance.

Why choose BDC for MM01 ?
You've the BAPI 'BAPI_MATERIAL_SAVEDATA' at your service. Easy to use & simple to maintain.
Unless you give me specifics i am not convinced about the BDC approach.
BR,
Suhas

Flat file to upload data using BDC for transaction MM01

Hi
I am trying to update data using bdc code has been attached below using a txt file.
It is updating the first set of data into the table mara ,but for the rest it is not
All the data from txt file has being loaded to internal table , but the problem is it does not gets updated from internal table to the database .
Only the first set of data has been loaded , rest of the data is not loaded
content of txt file
zsc zsc kg
zsv zsv kg
zsb zsb kg
Actual code
report ZMAT_UPLOAD
 no standard page heading line-size 255.
types declaration..........................................................................
types : begin of t_mat,
 matnr(20),
 desc(50),
 uom(5),
end of t_mat.
internal table and workarea declaration.......................................
data : i_mat type table of t_mat.
data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
 EXPORTING
 FILETYPE = 'DAT'
 TABLES
 data_tab = i_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
 'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
 '=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
 wa_mat-matnr.
perform bdc_field using 'RMMG1-MBRSH'
 'P'.
perform bdc_field using 'RMMG1-MTART'
 'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
 'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
 '=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
 'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
 '=BU'.
perform bdc_field using 'MAKT-MAKTX'
 wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
 'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
 wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
 'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.

Hi Sumant,
just concentrate on bold one
report ZMAT_UPLOAD
no standard page heading line-size 255.
types declaration..........................................................................

data : begin of t_mat occurs 0,
matnr(20),
desc(50),
uom(5),
end of t_mat.
internal table and workarea declaration.......................................
*data : i_mat type table of t_mat.
*data : wa_mat type t_mat.
include bdcrecx1.
start-of-selection.
moving the flat file content to internal table................................
CALL FUNCTION 'UPLOAD'
EXPORTING
FILETYPE = 'DAT'
TABLES
data_tab = i_mat.---> t_mat.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
loop at i_mat into wa_mat.------>loop at t_mat.
perform bdc_dynpro using 'SAPLMGMM' '0060'.
perform bdc_field using 'BDC_CURSOR'
'RMMG1-MATNR'.
perform bdc_field using 'BDC_OKCODE'
'=AUSW'.
perform bdc_field using 'RMMG1-MATNR'
wa_mat-matnr.---->t_mat-matnr(change in this for ur wa to t_mat.
perform bdc_field using 'RMMG1-MBRSH'
'P'.
perform bdc_field using 'RMMG1-MTART'
'ZOH'.
perform bdc_dynpro using 'SAPLMGMM' '0070'.
perform bdc_field using 'BDC_CURSOR'
'MSICHTAUSW-DYTXT(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_field using 'MSICHTAUSW-KZSEL(01)'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4004'.
perform bdc_field using 'BDC_OKCODE'
'=BU'.
perform bdc_field using 'MAKT-MAKTX'
wa_mat-desc.
perform bdc_field using 'BDC_CURSOR'
'MARA-MEINS'.
perform bdc_field using 'MARA-MEINS'
wa_mat-uom.
perform bdc_field using 'MARA-MTPOS_MARA'
'NORM'.
perform bdc_transaction using 'MM01'.
endloop.
Perform close_group.
Reward points for helpful answers.
Thanks
Naveen khan
Message was edited by:
 Pattan Naveen
Message was edited by:
 Pattan Naveen

Hi regarding material master and vendor master (mm01,xk01) upload using BDC

hi can any one tell me how to upload material maste and vendor master using BDC.
will the views capture by shdb when i use recording.

Hey i suggest you to go to LSMW direct input program method. That's the best option.
Material Master:
Object               0020   Material master
Method               0000
Program Name         RMDATIND
Program Type         D   Direct Input
Vendor Master:
Object               0040   Vendor master
Method               0001   Standard
Program Name         RFBIKR00
Program Type         B   Batch Input

Upload Purchase order text tab using BDC

Is it possible to upload Purchase order text tab in material master (tcode mm01) using a BDC.
If so pls tell me how to upload the same, what is the field name of the box.
Regards,
Senthil

u need to use READ_TEXT or SAVE_TEXT or WRITE_TEXT or COMMIT_TEXT to upload text into SAP.

Can we use bdc in WDA?

hi,
      can we use bdc in WDA? if yes please tell me how to do?

Dear Murthy Ganti ,
yes it is possible by creating the Functional module for your BDC recording . i.e you will get the code generated by the BDC recording . create a FM using the Code .
for example the below code is your recoding code
Assign your import parameters to your code
wa_iq02-MATNR      = MATNR.
wa_iq02-SERNR      = SERNR.
wa_iq02-GWLDT_O    = GWLDT_O.
append wa_iq02 to itab_iq02.
clear wa_iq02.
LOOP AT itab_iq02 INTO wa_iq02.
PERFORM bdc_dynpro      USING 'SAPMIEQ0' '1000'.
    PERFORM bdc_field       USING 'BDC_CURSOR'
                                  'RISA0-MATNR'.
    PERFORM bdc_field       USING 'BDC_OKCODE'
                                  '/00'.
    PERFORM bdc_field       USING 'RISA0-MATNR'
                                  wa_iq02-matnr.                      " IMPORT parameters
    PERFORM bdc_field       USING 'RISA0-SERNR'
                                  wa_iq02-sernr.                        "IMPORT parameters
CALL TRANSACTION 'IQ02' USING bdcdata MODE 'N' UPDATE 'S' MESSAGES INTO IT_MSG.
IF sy-subrc EQ 0 .
*      CONCATENATE 'Material No ' matnr sernr INTO text.
      return_message-MESSAGE = 'Address was updated '.
     else .
       return_message-MESSAGE = 'Address Was Not Changed '.
    ENDIF .
ENDLOOP .
and check your FM is working fine . and consume it in WDA through call function or service call
revert back if any doubt
regards
chinnaiya P
Edited by: chinnaiya pandiyan on Jul 20, 2009 7:13 PM

Error file generation using BDC

Hi .. friends . This is Sudhir . I have a scenario of loading 50 materials using BDC concept (generate session method) with tcode mm01. During loading if we have any faulty materials then they have to be written in a separate flat file (in the location which we specify in our pc). How can it be done? Hope your answers will be helpful for me to proceed further. Expecting for your reply...
With Regards
Sudhir S

Hi Sudhir,
            I had also similar requirement through Call Transaction method, Solution is
           We can store all messages occuring during exection of transaction (e.g MM01) in an internal table of type BDCMSGCOLL, so it contains message id, message no and not message description for that u have to pass internal table to a function module MESSAGE_TEXT_BUILD now u can get message description now store this in an internal table.
          Pass this internal table to a function module GUI_DOWNLOAD this will create flat file on ur PC based on the location u have given to this function module.
          For session method, session log contains the information u can check   INCLUDE program BDCRECX1 which will be created during recording, run this program in the debugger mode u will get idea.
Hope this will help u..............

I am trying to upload the purchase order long text in mm01 using BAPI

Hi All,
I am trying to upload Purchase Order Long text (which is in chinese Language) and Language field with ZH(chinese) in MM01 using BAPI_MATERIAL_SAVEDATA.
It is uploading properly, But in the Language field it is showing Z1(Customer reserve) instead of ZH(Chinese).
What could be the reason for this and how it can be resolved.
Thanks in advance,
Raja

Hi,
Which input parametr did you use? See table T002
LANGU = '1'
LAISO = 'ZH'
Rgds,
JP

Data upload for vendor balances using BDC

hi abap experts,
I have a requirement on data uploading using BDC.
For the vendor balances ie. for transaction FBL1N ( I was given a template for vendor balance upload and need to write a BDC program for that ) I need upload the exsisting transaction data to the system. is recording necessary for this?
can u pls help me with step by step process for vendor balance uploading.
Thanks,
Hema.

Hi
Please follow the following Steps:
Steps for recording:
Step1: Goto TCODE SHDB
Step2: Click on New Recording
Step3: Give the necessary Details such as TOCDE, Desc, ...
Step4: Do the screen by screen recording.(Please avoid extra screen to appear)
Step5: Save the recording.
Step6. Select the recording and click on Program button on toolbar.
Step7: Give the Program name and click on radio button Transfer from recording.
Step 8: It will open a new session with SE38 and a program with the recoding.
Step 9: then just add the basic code for BDC.
Regards,
Lokesh

I want in LSMW SAME CODING. THIS IS USING BDC CALL TRANSACTION

REPORT ZXX_BDC_PRA NO STANDARD PAGE HEADING LINE-COUNT 20
 LINE-SIZE 150 .
Program Name :ZXX_BDC_PRA *
Object Id : *
Develper Name : praveen *
Start Date : 25.06.07 *
Description : uploading flat file to sap system *
*--structure for Data Uploading.
DATA: BEGIN OF IT_STR ,
 VKORG LIKE RF02D-VKORG,
 VTWEG LIKE RF02D-VTWEG,
 SPART LIKE RF02D-SPART,
 KTOKD LIKE RF02D-KTOKD,
 NAME1 LIKE KNA1-NAME1,
 SORTL LIKE KNA1-SORTL,
 ORT01 LIKE KNA1-ORT01,
 PSTLZ LIKE KNA1-PSTLZ,
 LAND1 LIKE KNA1-LAND1,
 SPRAS LIKE KNA1-SPRAS,
 END OF IT_STR.
*--Internal Table for Data Uploading.
DATA: ITAB LIKE IT_STR OCCURS 0.
*--Internal Table to sucessfull Records.
DATA: ITAB1 LIKE IT_STR OCCURS 0.
*--Internal Table to Store Error Records.
DATA: ITAB2 LIKE STANDARD TABLE OF IT_STR WITH HEADER LINE.
*--Internal Table for Storing the BDC data.
DATA: BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA: MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA: COUNT TYPE I VALUE 1,
 S VALUE 0, E VALUE 0.
Selection screen *
SELECTION-SCREEN BEGIN OF BLOCK b1
 WITH FRAME TITLE TEXT-001.
PARAMETERS: P_FILE TYPE IBIPPARMS-PATH.
SELECTION-SCREEN END OF BLOCK B1.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
*functionality to use drill down list
CALL FUNCTION 'F4_FILENAME'
 EXPORTING
 PROGRAM_NAME = SYST-CPROG
 DYNPRO_NUMBER = SYST-DYNNR
 IMPORTING
 FILE_NAME = P_FILE.
Start-of-selection *
START-OF-SELECTION.
DATA FILENAME TYPE STRING.
FILENAME = P_FILE.
*-- Form to upload flatfile data into the internal table.
CALL FUNCTION 'GUI_UPLOAD'
 EXPORTING
 FILENAME = FILENAME
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = 'X'
 TABLES
 DATA_TAB = ITAB
 EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
*--Generating the BDC table for the fields of the internal table.
LOOP AT ITAB INTO IT_STR.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0107'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'RF02D-KTOKD'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'RF02D-VKORG'
 IT_STR-VKORG.
 PERFORM BDC_FIELD USING 'RF02D-VTWEG'
 IT_STR-VTWEG.
 PERFORM BDC_FIELD USING 'RF02D-SPART'
 IT_STR-SPART.
 PERFORM BDC_FIELD USING 'RF02D-KTOKD'
 IT_STR-KTOKD.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0110'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-SPRAS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_FIELD USING 'KNA1-NAME1'
 IT_STR-NAME1.
 PERFORM BDC_FIELD USING 'KNA1-SORTL'
 IT_STR-SORTL.
 PERFORM BDC_FIELD USING 'KNA1-ORT01'
 IT_STR-ORT01.
 PERFORM BDC_FIELD USING 'KNA1-PSTLZ'
 IT_STR-PSTLZ.
 PERFORM BDC_FIELD USING 'KNA1-LAND1'
 IT_STR-LAND1.
 PERFORM BDC_FIELD USING 'KNA1-SPRAS'
 IT_STR-SPRAS.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0120'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-TXJCD'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0125'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNA1-NIELS'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0360'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVK-NAMEV(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0310'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVV-BEGRU'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '/00'.
 PERFORM BDC_DYNPRO USING 'SAPMF02D' '0324'.
 PERFORM BDC_FIELD USING 'BDC_CURSOR'
 'KNVP-PARVW(01)'.
 PERFORM BDC_FIELD USING 'BDC_OKCODE'
 '=ENTR'.
*--Calling the transaction 'Vd01'.
 CALL TRANSACTION 'VD01' USING BDCDATA MODE 'N' UPDATE 'S'
 MESSAGES INTO MESSTAB.
 PERFORM MESSAGES.
 REFRESH : BDCDATA, MESSTAB.
ENDLOOP.
END-OF-SELECTION.
*--Populating the Success records internal table.
IF ITAB1[] IS NOT INITIAL.
format color 5.
 WRITE: /'SUCCESSFUL RECORDS'.
 format color off.
 LOOP AT ITAB1 INTO IT_STR.
 WRITE:/ IT_STR-VKORG,IT_STR-VTWEG,
 IT_STR-SPART,IT_STR-KTOKD,
 IT_STR-NAME1,IT_STR-SORTL,
 IT_STR-ORT01,
 IT_STR-PSTLZ,
 IT_STR-LAND1,
 IT_STR-SPRAS.
 S = S + 1.
 ENDLOOP.
REFRESH : ITAB1.
 WRITE:/ 'TOTAL RECORDS',S.
ENDIF.
*--Populating the error records internal table.
IF ITAB2[] IS NOT INITIAL.
FORMAT COLOR 3.
 WRITE :/ 'ERRORS RECORDS ARE'.
FORMAT COLOR OFF.
 LOOP AT ITAB2.
 WRITE:/ ITAB2-VKORG,
 ITAB2-VTWEG,
 ITAB2-SPART,ITAB2-KTOKD,
 ITAB2-NAME1,ITAB2-SORTL,
 ITAB2-ORT01,
 ITAB2-PSTLZ,
 ITAB2-LAND1,
 ITAB2-SPRAS.
 E = E + 1.
 ENDLOOP.
REFRESH : ITAB2.
 WRITE: / 'TOTAL RECORDS',E.
REFRESH : ITAB2.
ENDIF.
End of Selection *
END-OF-SELECTION.
TOP-OF-PAGE *
TOP-OF-PAGE.
WRITE:/ SY-ULINE.
WRITE:/10 'REPORT ID',21 SY-REPID,35 'USERNAME',46 SY-UNAME,
60 'SYSTEM DATE',70 SY-DATUM,80 'SYSTEM TIME',90 SY-UZEIT,
100 'PAGE NO',108 SY-PAGNO.
WRITE:/ SY-ULINE.
FOrm to Populate the BDC table.
 Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
ENDFORM. "BDC_DYNPRO
 Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> SPACE.
 CLEAR BDCDATA.
 BDCDATA-FNAM = FNAM.
 BDCDATA-FVAL = FVAL.
 APPEND BDCDATA.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form messages
FORM MESSAGES .
LOOP AT MESSTAB.
 IF MESSTAB-MSGTYP = 'I'.
 WRITE : / MESSTAB-MSGV1.
 ELSEIF
MESSTAB-MSGTYP = 'S'.
 INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB1 .
 COUNT = COUNT + 1.
 WRITE : / MESSTAB-MSGV1.
 ELSEIF
 MESSTAB-MSGTYP = 'E'.
 INSERT LINES OF ITAB FROM COUNT TO COUNT INTO TABLE ITAB2.
 COUNT = COUNT + 1.
 WRITE : / MESSTAB-MSGV1.
 ENDIF.
ENDLOOP.
ENDFORM. " messages

Hi
Go through the doc and do the same using LSMW
BDC is the way to transfer data by writing a batch input program which can use either session or call transaction method.
LSMW used to transfer data without/less code.
What type of data we transfer using LSMW?
LSMW is best suited for transferring master data.
Actually BDC and LSMW are not comparable at all.
for example LSMW itself can use BDC as a way of mass data transfer.
BDC is a mass data transfer technique via screen logic of existing SAP Data entry transactions. It behaves as if you are manually making thousand of entires into sap system as a background job. And that is probably the reason why BAPI's are preffered over BDC's.
On the other hand LSMW is a tool to facilitate DATA migration from other legacy systems ... It contains step by step procedure for data migration.
Like Managing Data Migration Projects , Creating Source Structures , Mapping Source structures wid Target structures , etc etc
LSMW internally might well be using the following techniqes for data transfer..
1. IDOX
2. Direct Input / BDC
4. BAPI's
LSMW is an encapsulated data transfer tool. It can provide the same functionality as BDC infact much more but when coming to techinical perspective most the parameters are encapulated. To listout some of the differences :
LSMW is basicaly designed for a fuctional consultant who do not do much coding but need to explore the fuctionality while BDC is designed for a technical consultant.
LSMW offers different techinque for migrating data: Direct input ,BAPI,Idoc,Batch input recording. While bdc basically uses recording.
LSMW mapping is done by SAP while in BDC we have to do it explicitly .
LSMW is basically for standard SAP application while bdc basically for customized application.
Coding can be done flexibly in BDC when compared to LSMW
1. Maintain Attributes:
Here you have to choose the second option and you can do the recording how this should work. Then assign the same to the Batch Input Recording name.
2. Maintain Source structure:
Create a structure name
3. Maintain Source field:
In this you have to create a structure same as that of the input file
eg: name
age
4. Maintain structure relations:
This will link the structure to the input file.
5. Maintain field mapping and conversion rules:
Here is the place where you can do coding, depending upon the code you have written or assignment you have done the values will get picked up from the file and get processed.
6. Maintain field mapping and conversion rules:
If you have any fixed values you can define here.
7. Specify files:
Specify the input file path and type.
8. Assign files:
This will assign ur file to the Input file
9. Read Data:
This will read ur data from teh file.
10. Dispaly Read Data:
You can see the uploaded data
11. Convert Data
This will convert the data to the corresponding format for processing
12. Display Converted data:
13. Create batch input session
Here this will create a batch input session for processing
14. Run Batch Input session:
By clicking on the session and process the same you can do teh needfu.
http://www.sapbrain.com/TOOLS/LSMW/SAP_LSMW_steps_introduction.html
http://esnips.com/doc/8e732760-5548-44cc-a0bb-5982c9424f17/lsmw_sp.ppt
http://esnips.com/doc/f55fef40-fb82-4e89-9000-88316699c323/Data-Transfer-Using-LSMW.zip
http://esnips.com/doc/1cd73c19-4263-42a4-9d6f-ac5487b0ebcb/LSMW-with-Idocs.ppt
http://esnips.com/doc/ef04c89f-f3a2-473c-beee-6db5bb3dbb0e/LSMW-with-BAPI.ppt
http://esnips.com/doc/7582d072-6663-4388-803b-4b2b94d7f85e/LSMW.pdf
for Long texts Upload
Please take a look at this..
http://help.sap.com/saphelp_erp2005/helpdata/en/e1/c6d30210e6cf4eac7b054a73f8fb1d/frameset.htm
Reward points for useful Answers
Regards
Anji

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

How many numbers of records can be uploaded using BDC at a time

dear friends,
i want to know that how many numbers of records can be uploaded using BDC at a time from legacy system(database).

no resticsation.
large value of data upload.

Capturing EPC error List into a local file using BDC

Can anyone let me know the Code for downloading the EPC check Results into a local File using BDC...[

You can use the function module
EXTENDED_PROGRAM_CHECK to get the errors and warnigs of a epc for a program.
then you can download that internal table information using GUI_DOWNLOAD fm.
Regards,
Ravi

Error while posting business area to TCODE J1IH using BDC

Hi ,
Using BDC i am trying to post values to J1IH.
Here, the business area is not getting posted.
Can you help me ?
regards
ekadevi S

Thanks for your quick response, Michael!
I have another question on import. I imported a folder and it got imported with a warning (A folder named 'Folder Name' was created or modified during the import but is not in a business area
Import completed, but with warnings. Please check the result.
I can see the folder in the database table. Is there a way to add this folder to the business area? Or my only option is to delete the folder out of EUL?
Thanks once again!
AJ

Call transaction using bdc tab and also skip first screen??

Hi,
Please help.
I want to call transaction PA30 fill it with values which are determined only at runtime and then skip first screen.
The screen doesn't have parameter fields so i cannot use 'set parameter id'.
I also cannot create a transaction with parameters as I only have these at runtime.
Anyone done anything like this???

hi,
you might be populateing the itab bdc_tab with the corresponding values fronm the recording.
while doing the recording go until to the screen wher u want to finsih.
and populate the bdc_tab wit the ok code,screen number and the value.
this will do.
for eg see the code below.
METHOD analyze_log.
DATA : wrk_extid TYPE balhdr-extnumber.
DATA : wrk_date(10) TYPE c.
DATA : it_rspar TYPE TABLE OF rsparams .
DATA : wa_rspar TYPE rsparams.
DATA: it_bdcdata TYPE STANDARD TABLE OF bdcdata,
      wa_bdcdata TYPE bdcdata.
DATA: params TYPE ctu_params.
CONSTANTS : object TYPE balhdr-object VALUE 'ZKIV_LOG'.
IF wa_kopf-vertr_nr IS NOT INITIAL.
    CONCATENATE wa_kopf-vertr_nr '/' wa_kopf-nachtr_nr INTO wrk_extid.
    wrk_date = '01.09.2006'.
    SET PARAMETER ID 'BALOBJ' FIELD object .
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
    wa_rspar-selname = 'ALDATE'.
    wa_rspar-sign = 'I'.
    wa_rspar-kind = 'P'.
    wa_rspar-option = 'EQ'.
    wa_rspar-low = wrk_date.
    APPEND wa_rspar TO it_rspar.
ELSE.
    CLEAR wrk_extid.
    SET PARAMETER ID 'BALEXT' FIELD wrk_extid.
ENDIF.
Update BDC tab
--Call SLG1 using BDC--&
params-dismode = 'E'. "Show errors only
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_CURSOR'.
wa_bdcdata-fval = 'BALHDR-ALDATE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BALHDR-ALDATE'.
wa_bdcdata-fval = wrk_date.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=SELE'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = 'SAPLSLG3'.
wa_bdcdata-dynpro   = '0100'.
wa_bdcdata-dynbegin = 'X'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_OKCODE'.
wa_bdcdata-fval = '=&F03'.
APPEND wa_bdcdata TO it_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam = 'BDC_SUBSCR'.
wa_bdcdata-fval = 'SAPLSBAL_DISPLAY                        0101SUBSCREEN'.
APPEND wa_bdcdata TO it_bdcdata.
CALL TRANSACTION 'SLG1' USING it_bdcdata OPTIONS FROM params.
--End of BDC--&
ENDMETHOD.
here wat i m doing is that i dont want the subscreen 101 to be displayed..
Message was edited by:
        Sandeep S

Doubt on mm01 using bdc

Similar Messages

Maybe you are looking for