Doubt pertaining Partner Function Role ES..

Hi,
What is the significance of the Role ES defined as a Partner Function in a One time customer.
I am using the default system created Account assignement Group: CPD.
THNX n Regards,
Subbzz..

Hi Raghav,
While creating a One Time customer Using the Account Group CPD what value should be entered against the PF-ES??
The system prompts me to enter the PF and doesnt allow me to save without the data.
Where do we need to create it for assigining here.
Cheerzz..
Subbzz.

Similar Messages

  • Why partner function description cannot see in the billing item?

    Hi Experts,
    I have one doubt about partner function.
    I have created a new partner function with description and assign this partner function to the billing partner function procedure.
    When I create the billing document, in the item level, I can only see the partner function name, but description is missing.
    What is the reason?
    Does any one meet such kind of situation before?
    Hope to give me some suggestion.
    Thanks in advance.
    Best regards,
    Chris Gu

    Hi Chris Gu;
    In the SD module personal numbers addresses are determined to be      
    the address of the personal area.                                     
    If the personal number is assigned to a sales office or sales         
    organisation the system shows the address of the sales office and     
    if there is no sales office the address of the sales organisation.    
    If you have no sales office or sales organisation assigned and is 
    not assigned to a personal area, the system does not determine an     
    address.                                                              
    Please maintain the assignment and the address should be displayed.   
    If you want the private address of the personal number to be displayed
    you can use modification note 63258. Please consider that    
    this may conflict with data security.   
    Regards
    Ruy Castro

  • R/3 partner functions to CRM BP roles

    Hi experts,
                       We are trying to replicate customers from R/3 to CRM. If a customer plays multiple partner functions, say he himself plays sold to, ship to, payer and Buyer in R/3, how can we show this as multiple roles in CRM. i know that we can not create relationship between identical BPs. we were succesful to view the contact persons and other partner functions in Relationship view. please help me out on this.
    Points will b rewarded surely.
    Thanks in advance.
    RK.

    Hi Kiran,
    Refer Note
    Note 914437 - Preassigning BP role during download from account group
    Regards,
    Shalini Chauhan

  • Difference Between Partner function & Business Role

    1) What's the difference between Partner function & Business Role?
    2) What is BP role grouping??

    Hi Jayant,
    Partner functions
    Partner functions are terms that describe the people and organizations with whom you do business, and who are therefore involved in transactions. For example, when you create an activity, based on Customizing settings, it automatically includes the partner functions Activity Partner, Contact Person, and Person Responsible. Partner functions are always assigned to partner function categories, which are hard-coded in the system.
    The system includes commonly used partner functions, but you can also define your own.
    Business role
    The business role is a role describing the user interface of SAP CRM and displays the CRM functions in the form of BSP applications in the CRM Web Client. The business role is assigned to the end-user.
    Business Role is a crucial aspect in configuring the Web UI as required by an individual or a group of Users.
    For Ex: In general an individual who works within Sales as an agent would be able to login as a Sales Professional and a manager of the same team would login with the business role Sales Manager.
    This is beneficial as the sales manager would be able to view the entire performance of the team, sales reports and will have access to all opportunities which he can assign to individual agents etc. whereas a Sales agent will be able to view only opportunities assigned to him, his individual sales targets etc.
    All this can be achieved within SAP CRM 7.0 Web UI by configuring the Business Role.
    Regards
    Leon

  • Assinging bp roles to partner functions

    Hi friends,
    can you please let me know how to asian bp role to partner functions?

    Hi,
    You can try the following:
    While defining the partner function we can specify the relationship category, check the following customizing.
             SPRO>Customer Relationship Management>Basic Functions>Partner Processing>Define Partner Functions.
    Here define the partner function with specific relationship category and then open transaction 'BUBA' here you can assign BP role to relationship category.
    More over for some BP roles, for example 'Client', if you maintain a BP with catagory Organization, you will see 'Exclude Partner Function' tab in transaction BP. here you will see all the allowed Partner Functions and if you want to exclude some PFs here it can be done.
    Regards
    Ajay

  • Difference between partner role & partner function

    hi all
    what is the differnce between partner role & partner function ?
    Please elaborate with examples.
    Kiran

    Hi,
    Partner function
    Partner functions are terms that describe the people and organizations with whom you do business, and who are therefore involved in transactions. For example, when you create an activity, based on Customizing settings, it automatically includes the partner functions Activity Partner, Contact Person, and Person Responsible.
    BP Roles
    A business partner role is used to classify a business partner in business terms. The roles you assign to a business partner reflect the functions it has and the business transactions in which it is likely to be involved.
    Regards
    Srinu

  • Role of Partner Function in One Time Vendors..

    Hi All,
    Can any one let me know the significance of the Partner function in a vendor. Should we have to define the partner function for One Time Vendor in R/3 system, which will be replicated in SRM??
    Thanks in Advance.
    BR,
    Mahesh. J

    Hi Ravinagh, many thanks for the information.
    I've tested your proposed solution but unfortunately can't get it to work.
    I've activated the delivered scenario 0003 (RECIPIENT BANK ORIENTED) & created a general bank chain as follows via transaction FIBB:
    In the Bank Chains screen, BankChn ID = 00001, No. = 1, Typ = 2, Corr. ctry, Corr.Bank key & Bank acct all completed with intermediary bank details.
    In the Assignment screen, Crcy = USD, Sender Ctry = GB, Sender Bank Key - 200000, Recipient Ctry = KY, Recipient Bank key = blank, PmntMthSu = blank, BankChn ID = 00001.
    I then created a OTV invoice with bank details of Bank Country = KY (& valid bank key & account).
    The payment program selects the invoice to be paid using currency USD, house bank which uses bank key 200000 and uses the bank details as entered in the OTV.  It pays the invoice but no mention is made in the log of intermediary banks, and when I check table REGUH there are no entries in the intermediary bank fields for the payment proposal.
    I'd be grateful for any further suggestions!

  • Partner function;Partner procedure; Partner object; Procedure assignment??

    Hi,
    If we check T-code: VOPA, we could find below:
    Partner function(Partner type inside);
    Partner procedure;Procedure details;Procedure assignment;
    Partner object(Customer Customer Master;Sales Document Header Sales Document Item..etc)
    Account Group;
    Anybody could explain clearly on above relations? Would be better if could attach an example by connecting to XD01 creating customer master data, especially the useage of Account Group.
    thank you very much!

    Let's take kinds of example like this..
    I went to an bookstore, bought an book and got the invoice. Then i paid the money, the book is deliveried to me.
    Analysis this business process:
    Partner type:
    I as an person who purchase goods, so i  should belong to partner type Customer.
    Bookstore sell goods, they should belong to partner type Vendor...
    Partner function:
    I as an customer but also play roles like pay the amount, receive the invoice..etc
    As an customer, i am function like an Sold-To Party.
    I pay the amount, then i function like an Payer.
    I receive the invoice , then i function like an Bill-to Party.
    Also i got the book from bookstore, then i founction like Ship-To Party.
    All above function belong category:Customer.
    So in SAP system, VOPA, i need first define corresponding partner function, and assign it to partner type.
    Partner object:
    Partner object is Customer master;Sales document Header,Sales document item..etc
    We define above mentioned Partner functions into corresponding partner object, also we need define Partner procedure and assing account group inside it, so as ?????
    Sorry, i think idont know what Partner procedure works? And why we need PArtner procedure??
    Seems partner procedure is related with Account Group...
    I remembered we had assign the Partner function to Account Group once, why we still need Partner procedure to Account Group again???? Coz inside PArtner procedure is partner function...
    And what imapct when we creating customer master data XD01 or processing sales order..Billing document...
    Hope could kindly help to clear my doubt......
    Thank you very much!

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • Partner Function in Vendor Master With Internal Number Range

    Hello Friends,
    I am creating vendor master record with internal no range.I wanted following clarifications.
    1.In partner function screen, I want to have same vendor no which i am creating to be assigned automatically to VN.OA PI and GS funtions at the time of its master creation.This is not happening in my case
    2.Partner function like VN,OA,PI and GS does not appear automatically whereas i have to select it manually.
    Regards
    Vivek

    Hi,
    During defining the partner Schema, please follow the process:
    a.Create partner Schema
    b.After creation of partner Schema, select your partner Schema and click u201Cpartner roles in schemau201D and you will have next screen
    Now for Partner function like VN,OA,PI and GS as you required and select the check box of mandatory
    and save.
    Now try creating Vendor and you will have Partner function like VN,OA,PI and GS in vendor master.
    Note: The following configuration steps for Vendor master are:
    1. Create Vendor Account Group.OBD3
    2. Maintain Number Ranges from Vendor account Group:XKN1,
    3.Assignment of Number ranges to Account Group,OBAS
    4.Partner Function: SPRO->MM->Purcahsing->Partner Determination-> partner roles->Permissible partner role sper account group
    5.Partner Schema:
    SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Define partner Schema
    6.Assgin partner schema to accont Group
    SPRO->MM->Purcahsing->Partner Determination->Partner setting in Vendor master record-> Assgin partner schema to account Group
    Regards,
    Biju K

  • Partner function for customer through IDOC

    Hi All,
    I have a requirement in which I need to create the customer master through IDOC. I am using DEBMAS basic type for that. In its functionality, I need to assign different partner functions to it.
    When I create customer without giving any partner details,  4 entries get created by default with partner functions as BP, SP, PY, SH and KUNN2 value as INTERNAL or the same customer number which is getting created. But I want that the customer number provided by me should be assigned as partner function. Is there any way to change the default entry which is getting created so that I can replace the INTERNAL customer number with the one provided by me.
    I identified the segment as E1KNVPM in it at hierarchy level 3. I passed the partner function in the PARVW field of it and provided the customer number which I want to assign as partner function in the KUNN2 field. But I am getting error Customer INTERNAL already exists for function <Partner function>.
    Am I missing something. Any msgfn or any other input.
    Please help me on this.
    Thanks
    Natasha

    Hi,
    Im facing similar problem
    Im trying to create the customer master through IDOC.
    I am using DEBMAS06 Idoc. 
    I need to assign two partner functions to it.
    When I create a customer with  giving  two partner details, 
    6 entries get created by default with partner functions as BP, RP, EM, SH and KUNN2 value as INTERNAL,
    two others entries (ZC,ZV) are created because this partner roles i defined to be created but KUNN2 hasnt assined value and request to fill it.
    I identified the segment as E1KNVPM in it at hierarchy level 3.
    I passed the partner function in the PARVW field of it and provided the customer number which I want to assign as partner function in the KUNN2 field.
    But I am getting error when  "Customer INTERNAL already exists for function <Partner function>".
    Am I missing something. Any msgfn or any other input.
    How can avoid this error?
    Please help me on this.
    Thanks
    Armand

  • Discount based on partner function

    Hello,
    A customer 2000 generates an order with his normal role of Sold to Part, Ship to Part, Bill to Party & Payer. A Partner function called special stock partner is also assigned to that customer which in itself is another customer 3000. If the customer 2000 generates an order with that special stock partner 3000 an automatic discount condition called ZDI (10% discount) should come up and give the customer 2000 discount. i.e. i want to give discount to customer 2000 if customer 3000 is his special stock partner. How do i make this condition automatic via condition record.
    Regards,
    Shahzad

    Hi,
    1st - Include the field partner function (or customer number) as a ZZ field in the structures KOMG, KOMK. For example ZZTPTNR - Third partner number - CHAR10
    2nd - Create condition table with this partner function / number field ZZTPTNR
    3rd - Create/modify the access sequence to include the new table
    4th - Create/modify the condition type for the discount
    5th - Add the discount condition in your pricing procedure
    6th - Create the condition record for this discount (VK11)
    7th - Fill this field in the userexit MV45AFZZ, form  userexit_pricing_prepare_tkomk with the required partner function or customer number
    Hope this helps your request.
    Regards,
    John

  • Rule Modeler - Automatic assignment Partner Function based on PC of IBASE

    Hi Experts,
    I have the following requirement. The IC Agent when receiving a call has to create a Service Ticket (Service Order). By creating the Service Ticket the responsible Service Partner has to be assigned to solve the service incident based on the Postal code of the IBase (Installed Base).
    The following steps I have done:
    1. I have created the Service-ID Z_RE_RULE_EXEC (Rule Invocation) with the following properties:
        CONTEXT               Context
        DEF_ROUTING    Default Routing
        LOG_LEVEL        Logging Level
        POLICY                Root Policy
    2. Under Repository I have defined a new context: Z_TICKET_ASSIGMT with the following properties:
    Context Properties: No Customizing
    Authorization Groups: No Customizing
    Attributes: 
    Name: ZPOST_CODE1_IB
    Show Attribute: Flag marked
    X Path Expression: /parts/currentIbase/ComponentAddress/POST_CODE1/text()
    Fact Gathering Service: FG_IC_REF_OBJ
    Attrib. Ext. Class: CL_CRM_ERMS_ATXT_TEXT_NCAT
    Actions:
    Action-ID: Z_PARTNER_ID
    Show Action: Flag marked
    Action Service ID: DD_AH_PARTNER_ID
    Action Parameters:
    Parameter-ID: PARTNER_ID
    Display Mode: O
    Inp Spt Class: CL_CRM_DD_F4_BP
    Afterwards I created the Rule Policy: Z_PRUEBA2 with the condition that if the Postal Code of the IBase is 08030 or 08035
    the Partner Function ID 56 has to be assigned to the Service Ticket. I have released the Rule Policy afterwards.
    Into the standard Service Manager Profile SAP_ORDERROUTING I have added the created
    Service-ID Z_RE_RULE_EXEC with the following properties:
    CONTEXT:     Z_TICKET_ASSIGMT
    LOG_LEVEL:     0
    POLICY:     Z_PRUEBAS2
    Now I want to test the rule policy by entering with the ROle SAP_CRM_UIU_IC_MANAGER (IC Manager) but I can not see any possibility to do that. So my questions is how I can test the rule policy Z_PRUEBAS2? Do I have to assign the Service Manager Profile to the IC Center Agent Role?
    Best Regards
    Oliver

    Solution: Problem solved. Error was the name of the attribute. It has to be POST_CODE1_IB
    and not ZPOST_CODE1_IB.

  • Partner Function not picked in Scheduling agreement.

    Hi
    I have maintained the Partner functions in Vendor master.
    But when i create a Scheduling agreement, the partner functions are not picked from Vendor master.
    Can any body help on this please?
    Thanks & regards,
    Sasi

    Dear Sir,
    I am also face same problem.
    AIM : I want to display manufacture name in good receipt.
    I done : I have create one charecteristic for manufacture and in this charecteristic i have assign field of manufacture name which is maintain in vendor partner role. Then i have maintain one batch class RM_class and it assign to material.But when i want to display manufacture name in good receipt it is not display.
    Analysis : The field of manufacture name is not saved in any table it is use in structure. so field of manucture is not caintain any value so it can't display any valve in good receipt.
    Solution: If you give name of manufactue in CT04(charecteristic of manufacture) and this charecteristic assign to class(RM_class) then this class is assign to material.Than when you create good receipt and select manufacture name it will display at the time of batch determination and also when you want to dispaly mateiral list by manufacture you can see it with help of BMBC.
    If you have any other idea please explan me.
    Ragards,
    Mahesh Wagh.

  • Partner function copied from PO to Outb.del. but output message not created

    Hello Gurus,
    As the copy of the partner function from the PO to the Outbound Delivery is not supported in standard, I have activated userexit_save_document_prepare (MV50AFZ1) where I can add the other partner roles out of the purchase order into table XVBPA (VN). Thanks to this exit, the partner function VN is correctly added in the Outbound Delivery.
    My issue is the following this partner function should create an output message using the partner function VN but this one is not created during the Outbound delivery creation. But if I go to the VL02N and just save the Outbound delivery again (without change) now the output is correctly created and processed.
    Does someone of you know the reason why the output message for partner VN is not triggered at the Delivery Creation but
    after the manual save?
    Kind regards
    Chris

    I have just explained this in Copy partner from PO to inbound delivery

Maybe you are looking for