Doubt regarding Restoring ORACLE_HOME after applying patch

While going through this doc: http://docs.oracle.com/cd/B16240_01/doc/em.102/e15294/recovery.htm
I encountered a doubt and I wanted to get it cleared:
Under the heading Restoring ORACLE_HOME they have mentioned we can remove any changes made to the inventory.
Does this mean, the patch applied will be rolled back?

While going through this doc: http://docs.oracle.com/cd/B16240_01/doc/em.102/e15294/recovery.htm
I encountered a doubt and I wanted to get it cleared:
Under the heading Restoring ORACLE_HOME they have mentioned we can remove any changes made to the inventory.
Does this mean, the patch applied will be rolled back?Yes
remember close your thread after your questions will be solved
Roshan Jose     
Handle:      Roshan Jose 
Status Level:      Newbie (15)
Registered:      Jan 28, 2013
Total Posts:      13
Total Questions:      2 (2 unresolved)
Name      Roshan Jose
Occupation      Oracle DBAwhy so many unresolved questions?

Similar Messages

  • Issue with updation of PAN details in ESS after applying patch

    Hi ,
    We have applied a new patch recently,
    as follows:
    SAP_HR - To patch - 49
    EA_HR - To Patch - 49
    When users are trying to update PAN details it says throwing error " fill in the required fields,"
    i tried to apply relevent note :1243216 , but iam not able to apply it as system says it cannot be implemeted.
    Can any body come accross this issue please give me solution as this issue has become critical.
    Thanks in advance .
    Regards,
    Evani

    Duplicate post.
    After applying patch , error found on bottom of signon screen
    After applying patch , error found on bottom of signon screen

  • Portal Runtime error after applying patch 12 to portal

    hi experts,
    i m getting following error
    Portal Runtime Error
    An exception occurred while processing a request for :
    iView : pcd:portal_content/administrator/super_admin/super_admin_role/com.sap.portal.content_administration/com.sap.portal.content_admin_ws/com.sap.portal.webdynpro_ws/com.sap.portal.content_administrator/com.sap.portal.wd_content_administrator
    Component Name : com.sap.portal.appintegrator.sap.WebDynpro
    Exception in SAP Application Integrator occured: ApplicationIntegratorException.
    Exception id: 09:30_22/01/08_0005_16892850
    See the details for the exception ID in the log file
    after applying patch 12 in portal
    i m getting this error in guided procedures,Universal worklist ,webdynpro workset undfer content administration
    Please suggest me the solution
    regards,
    vani

    Hi Vani,
    Just go to the System Configuration and UME configuration.
    Now go to user mapping tab, and remove the entry for a reference system. Then check for the issue if persists, restart system.
    Hope this helps!
    regards
    Atul Shrivastava

  • My query is not executing properly after applying patches(bi.7

    iam working bi.7 support package 13
    after applying patches
    my query is not executing properly in production my problem with FI queries
    the query is executing properly but ihav created newformula using formulavariable that fields are not getting data in report if i click on currency conversion iam getting popup but currency translation coversion list is not coming and currency type(target currency also not dispalying)
    but if i execute same query in development its working properly newformula fields are getting data and currency conversion also working in development
    can u please help me in this issure
    i hope as soon i will get solutions from bw gurus

    That currency conversion problem is solved
    i checked TCODE:RSCUR IN PRD its not showing any details
    again i checked in dev and moved all currency types dev to production
    now its wokring
    i hope check with this it will work

  • Internet Procurement responsibility error after applying patch

    Hi Guru(s):
    After applying patch 5156915 we get this errro when we select i Procrurment responsibility:
    The POR SSP HOME function is not available under the Internet Procurement responsibility.
    iProcurement is installed.
    Any ideas would be most welcome thank you.
    EBS 11.5.10
    Edited by: Dan A on Dec 16, 2008 9:10 AM

    Thanks yet again to Hussein.
    I am a little worried that I couldnt find that same document.
    I entered in ML "The POR SSP HOME function is not available" ....and that document did not appear.
    Then I entered it with underscores : "The POR_SSP_HOME function is not available" ... and now I can see the doc.
    How did you do your search?! I am guessing you used udnerscores or else something different? ? ?
    Thanks, and still curious,
    DA
    By the way we are told to "clear" the _pages directory. I would do this with
    cat /dev/null > oa_html , etc ?
    Edited by: Dan A on Dec 16, 2008 9:44 AM

  • Login page not coming up after applying patch 12374730

    Hi ,
    Login page is not coming up after applying patch 12374730.
    OS : Solaris 10
    Application release 12.1.3
    Thanks,

    Did you apply the patch successfully with no errors?
    Yes
    Do you have any invalid objects in the database?
    NO
    Did AutoConfig complete successfully?
    Yes
    Please check Apache log files for details about the error.
    Thanks,
    Hussein

  • Invalid package WWSBR_IMT_SERVICES after apply patch 3.0.9.8.1

    After applying patch 3.0.9.8.1, get an invalid package.
    Upon trying to compile the package WWSBR_IMT_SERVICES the following error
    occurs
    SQL> show err
    Errors for PACKAGE BODY WWSBR_IMT_SERVICES:
    291/7 PL/SQL: Statement ignored
    291/20 PLS-00201: identifier 'CTX_DOC.PKENCODE' must be declared
    293/8 PL/SQL: Statement ignored
    293/21 PLS-00201: identifier 'CTX_DOC.PKENDCODE' must be declare
    We have NOT installed oracle intermedia... why is this error occuring?

    According to BUG 2120388 this is ok!

  • Regarding running catcpu.sql after applying patch

    Hi all,
    database version: 11.2.0.2 (single instance)
    Os: Windows 32-bit
    I have applied a bug patch in oracle home 11.2.0.2, but as per the document i didn't run the catcpu.sql after applying the patch in my database.
    After 1 month today i run the catcpu.sql in the database (Dev database), it gives the following sys objects invalid: (after running utlrp.sql also this persist)
    DBMS_SCHEDULER
    DBMS_ISCHED
    DBMS_ISCHED_CHAIN_CONDITION
    SCHEDULER$_JOB_EVENT_HANDLER
    could anyone please help me.
    Thanks in advance

    user12133150 wrote:
    Hi all,
    database version: 11.2.0.2 (single instance)
    Os: Windows 32-bit
    Pl identify exact OS version
    >
    I have applied a bug patch in oracle home 11.2.0.2, but as per the document i didn't run the catcpu.sql after applying the patch in my database.
    Pl identify the patch number
    After 1 month today i run the catcpu.sql in the database (Dev database), it gives the following sys objects invalid: (after running utlrp.sql also this persist)
    DBMS_SCHEDULER
    DBMS_ISCHED
    DBMS_ISCHED_CHAIN_CONDITION
    SCHEDULER$_JOB_EVENT_HANDLER
    could anyone please help me.
    Thanks in advancePl identify why you ran catcpu.sql after 1 month.
    Pl compile these objects manually and post the compilation error here
    HTH
    Srini

  • System problems after applying patches

    Hi all,
    I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
    First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
    Do you have any idea what could be the problem?
    We restored the system and now I got a similar error already when updating SPAM.
    Thanks & Regards
    Cornelius

    Hi,
    Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
    ---Satish

  • Dump error after applying patches

    Dear all;
    after applying SAP_BASIS Packs (SAPKB62019 and SAPKB62020) the transaction was canceled before finched implementing the patches and We are receiving ABAP dump errors while executing any transaction ( syntax_error)
    could you help me to resolve this proble?
    thanks and regards.
    Issam CHIBOUNI

    Hi
    SAPKB62020
               Symptom: After you import Basis Support Package SAPKB62020, you may experience a change in the system response at different points in an R/3 Enterprise system. This problem can be seen in the sudden appearance of screen elements, for example, or in changes in the process flow of transactions. In extreme cases, it can also cause data corruption.
               Reason: Support Package SAPKB62020 included an incomplete correction to BAdI processing that caused the execution of BAdI implementation of deactivated Enterprise Extensions.
               Solution: You must refer to SAP Note 601742. Import Basis Support Package SAPKB62023 as soon as possible (planned release date is May 06, 2003) or implement the additional correction instructions as described in Note 601742.
    thanks and regard
    Khurshid

  • Database still showing 9.2.0.5 after applying patch 4287598

    Hi all,
    I am upgrading the oracle Application 11.5.10 to 11.5.10.2. For this i am following the 11.5.10.2 Technology Stack Validation Patch readme.
    As per the utility's output on database server node, I have applied the patch 4287598 to upgrade database version 9.2.0.5 to 9.2.0.6. But after applying the patch also database still showing 9.2.05.
    How to get currect database version?
    Please help.
    Regards,

    To upgrade the database to 9.2.0.6, you need to apply (Patch 3948480 - 9.2.0.6 PATCH SET FOR ORACLE DATABASE SERVER).

  • Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

    hi everyone.
    here is the problem
    we recently applied patch 5 for CM on EP 6.0 SP2
    the portal platform is at patch 27.
    after having applied the patch the logs indicated that the upgrade sequence completed successfully.
    however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
    under system admin when we go into Content Management Configuration it says invalid Repository Managers.
    i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
    i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
    can somebody help?
    thanks

    Hi,
    I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
    Hope this helps
    Cheers,
    Jochen

  • Icons for the Reports missing in Workspace after applying patches

    Hello Gurus,
    I have installed 11.1.2.2 on one of my VM's and then applied the 11.1.2.2.300 patch on it.
    I have followed the Read Me for all the patches before applying them.
    After applying the patches however the icons for the Reports in workspace
    [IMAGE ON THE FOLLOWING LINK]
    http://i45.tinypic.com/29f6mc0.png
    I have reconfigured web server at the end but that did not help. Any help will be highly appreciated.
    Thanks
    HyperionEPM.

    Hello Nick,
    Yes all the components show green and I can access the reports without any issues. Its just the icon that does not show up.
    I will check the logs you have mentioned to see if there are any exceptions in them.
    But the issues started up after applying the patches for 11.1.2.2.
    I have checked the location path mentioned in Weblogic.xml in raframework.war file and the path points to the correct folder location where the folders mt and mt_thumbnails are located.
    Is the any other way out?
    Should I delete the contents inside the tmp folder located in RAFramework0
    or
    Can reconfigurin Reporting and Analysis framework services help in resolving the issue?
    Please let me know.
    Thanks.
    hyperionEPM

  • Instance failed after applying patch

    i am learning on ides. i applied patch #10 to my system, some how it failed to apply, now my instance is not starting up , is there any way to undo the patch. thanks for the reply

    Hi,
    Usually instance startup is nothing to take with the Patches applied specially in ABAP kind of system. If your Patch implementation is in middle, So you must be getting lots lots of dump...But system should come up in most of cases.
    Ok...Now...have you changed something related to Parameters (Memory, DB related or any other parameters)...because parameters change is something very crucial when your system is not coming up?
    Please post some more inforrmation so that we can help you out.....Please try to debug step wise...
    1) is DB is coming up?
    2) if yes, please post some relevent info from dev_disp, dev_w0 or dev_ms file or from some other files which are getting updated when you are trying to restart your system.
    With Regards,
    Saurabh
    Edited by: Saurabh.Arora on May 17, 2009 9:34 PM

  • CUSTOM.pll missing after applying patch 6167056

    HI ALL,
    i have applied patch 6167056 successfully, to carry on the post install step to Copy the CUSTOM.pll to $AU_TOP/resource and re-generate the CUSTOM.plx
    i cannot find the CUSTOM.pll at 6167056/backup/resource
    bash-3.00$ pwd
    /XXXX/XXXX/6167056/backup/resource
    bash-3.00$ ls -l
    total 184
    -rw-r--r-- 1 oradev dba 94208 Oct 15 19:33 JAINTAX.pll
    bash-3.00$
    CUSTOM.pll is missing. Could any suggest why it was not generated?
    Thanks,
    SK

    hi,
    i had stopped the apps services before applying the patch. Before apply the patch i has check the location /6167056/resources
    bash-3.00$ ls -l
    total 976
    -rw-r--r-- 1 oradev dba 98304 Apr 12 2007 CUSTOM.pll
    -rw-r--r-- 1 oradev dba 20480 Apr 11 2007 JAINHELP.pll
    -rw-r--r-- 1 oradev dba 196608 Apr 11 2007 JAINSTFM.pll
    -rw-r--r-- 1 oradev dba 94208 Aug 31 2007 JAINTAX.pll
    -rw-r--r-- 1 oradev dba 90112 Apr 11 2007 JAINTAX1.pll
    bash-3.00$ pwd
    /xxxxx/xxxxxx/6167056/resource
    bash-3.00$
    i had not taken the backup of the above CUSTOM.pll at /6167056/resources
    i need to perform the post-install step of Copy the CUSTOM.pll to $AU_TOP/resource and re-generate the CUSTOM.plx
    should copy the CUSTOM.pll to regenerate using f60gen module=CUSTOM userid=apps/<appspwd> module_type=LIBRARY
    OR can i skip the post install step because there were no customization applied?
    Please suggest
    Regards,
    SK

Maybe you are looking for