Doubt regarding SAP Note application

Hi,
I have found SAP note 1051619 which needs to be applied in our R/3 4.6C system.
As per the note the corrections are delivered in Basis support package SAPKB46C55.
Our Production system is at support package SAPKB46C53.
At the moment we are not in position to apply the support packages due to certain business constraints.
The note mentions of corrections that are be applied.
However, we are confused of the language used regarding the validity of the note.
The corrections mentions of,
Valid to Support Package
46C 46C-SAPKB46C54
Please advise if the corrections can be applied to our system which is at Basis support package level SAPKB46C53.
Regards,
Trupti

Valid to Support Package
46C 46C-SAPKB46C54
Yes, this means that you may apply this correction, if you are on 46C, and your support package is not higher than SAPKB46C54. In other words, this is from SAPKB46C01 to SAPKB46C54, and so includes your SAPKB46C53.
hope this helps

Similar Messages

INI file preference not being followed - Regarding SAP Note 1409494

Hi,
Following SAP Note 1409494, it seems like there is a preference over locations of INI files.
I have setup on my Citrix servers, the environment variable (SAPLOGON_INI_FILE) pointing to a central location of INI file.
The problem is that in the same server there is the BW logon pad that requires a different set of configurations, therefore a second INI file.
When I try to use the first option on the note (command line parameter /INI_FILE) pointing to a second INI file, it uses the one on the environment variable.
Is that the way it's supposed to work???
Is there a way to bypass this?
Thanks!

Hello Vijith,
I guess you are talking about <a href="https://service.sap.com/sap/support/notes/1034932">note 1034932</a>. It is currently being changed, what it will basically say is:
If you put the jars somewhere in /usr/sap and later on upgrade the engine you will actually loose the entire folder and will have to copy the jar files again.
As a permanent solution you could define an <a href="http://help.sap.com/saphelp_nw04/helpdata/en/ee/0618d0899001408d821096c85ff8a2/frameset.htm">HTTP Alias</a> on the engine (not an application alias but an http alias) which will point to a folder on the file system outside the /usr/sap folders.
After that just set JavaGuiCodeBase for the applet to whatever you chose for the http alias name.
If you have suggestions to further improve the note, please let us know.
Best regards
Rolf-Martin

Regarding SAP Notes

Hi Frnds,
we are working on service pack 17 SAP BI & we have golive in next month .
what are the SAP notes should be implemented on this service pack regarding loading perfomance & paramter setting related to loading , memory things.
Kindly provide your inputs on this.
Regards
Ravi

Hi,
Plz check the below link for SAP Notes List for SAP BI:
http://wiki.sdn.sap.com/wiki/display/BI/ListofOSSNotesforSAPNetWeaver+7.0BIQueryPerformance
Regards
Ram.

Issue : Regarding SAP Note 1465628

Dear All,
we have to Implement the SAP Note No 1465628 , For that During manual Corrections , we are Unable to Upload the HR_IN_ESI_005_99 , it is saying
ERROR Ocuured unknown file Format (unknown)
Our System is ECC6 , Please help on this to Get the SAP note Apply.
Thanks & Regds
Manish
Edited by: Sikindar on Jun 10, 2010 5:18 PM

Regarding your query, to use the transaction SFP you have to install and configure ADS (Adobe Document Services). Can you please check whether you have done the necessary configuration or not?
Please have a look at note 894009 and the reference note attached to it.
Regards
Ramana

Regarding SAP Note- Manual/Automatic Implementation.

Hi Experts,
We have few OSS Notes related to Archiving. Is there any thing specifically mentioned in the note about the type of implementation(Manual or Automatic). I mean ,how do we know whether a note should be implemented manually or automatically ,or both the ways.Generally if it is manual we should require an access key for manual implementation if automatic is not possible.Please correct me if i am wrong. Please suggest
Best Regards,
Lakshman

Hi,
please look at the item SOLUTION in the SAP note (immediately before the header data).
There you can find all actions to do, actions before SNOTE, actions after SNOTE, ...
But there are more problems if your notes need other related notes, which will be downloaded automatically.
Look into all of them before implementing the SAP notes for manual actions!
Regards,
Klaus

Regarding SAP note 214604

hi all,
please let me know a small thing...i have to apply an OSS note (214604) for inbound delivery workaround. the note involves creation of some z entries in some tables and some source code modification.
Please let me know if i use SNOTE for applying the note, will it create the table entries itself or will the entries have to be created manually first and then the note be applied for source code modifications.
ASAP plz....:-)
regards,
PJ

Hi Surajit,
Please make sure the below mentioned Notes are implemented in the sequence given in order to get the changes related to Budget 2011
SAP Note 1558475- Amendments to IT calculation notified undercircular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of invalid PAN.
SAP Note 1568264- Budget Changes 2011
Go through the text of the Notes for the pre-requisites and manual steps you need to perform.
Hope this help
Sarah

Regarding SAP Note

Hi all,
I want to see the SAP Notes(Ex: 870864). I saw so many sap notes but Iam not getting how to see those notes. Can anybody tell me how to see these notes?
Thanks & Regards,
Abdullah Shaik.

Hi,
This is the link to access SAP notes.
https://websmp203.sap-ag.de/notes
You need a service market place user id and password though.
Regards,
Bhavesh

Doubt regarding SAP WebAs

hi frds,
      1) what is the use of WebAs?
      2) All SAP Components can run in SAP WebAs?
      3) SAP System means SAP WebAS ?
      4) XI Components like IR,IDand SLD..etc reside on SAP WebAS...like this     other SAP Netweaver Components like EP Components also reside in 2 stacks of SAP WebAS?
      5)How the XI Message flows from sender Business system to Receiver Business system via WebAS ? plz give example?
      6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?

hi Murali
<b>1) WAS</b> : SAP Web Application Server is a scalable and reliable component platform. It supports the development and operation of J2EE-based and ABAP-based Web applications and Web services. SAP Web Application Server embraces native Web technologies while providing all the benefits of what has previously been referred to as SAP Basis including the benefits of the proven and scalable data, system, and software lifecycle management capabilities that SAP is known for.
2) The new release of SAP Web Application Server offers full compliance with J2EE 1.3 standard. A completely revamped load-balancing technique highly improves the scalability of the server. Internal persistent information that the system needs to access is now stored in a conventional relational database increasing the robustness and the reliability of the server.
3) SAP System not means SAP WebAS but other parts are also involved
4) yes XI Components like IR,IDand SLD..etc reside on SAP WebAS
5)To know about flow you go through a scenario from TBIT
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?
SAP Web Application Server adds business value because it
●     Allows customers
●     to run any 3rd party J2EE 1.3 compliant application
●     to develop and run their own J2EE 1.3 compliant applications
●     to easily extend SAP solutions on the basis of ABAP and J2EE technology
●     Offers an highly improved load-balancing which results in much better performance and, even more important provides much better scalability
so third party business system is party's own system which is being integrated by SAP XI
for more details on WAS kindly follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/92/7e63423dbc0e53e10000000a155106/frameset.htm
Thanks
sandeep
PS; if helpful reward points

Regarding sap.suspendable.application application property

Hi,
Can anyone help me on what is the purpose of "sap.suspendable.application" property.My problem is i have a webdynpro application with four views.When i integrate this application with portal,(as multiple iviews for a application i.e iview>page>workset-->role),on clicking the page link,all the iviews are getting reinitialized.i.e the application is getting reinitialized every time.How can i solve this problem.Does "sap.suspendable.application" solves this.

You should change the isolation level of your iViews (don't remember to what, but there are not so many options )

Bex Analyzer - Selection criteria missing after SAP Note application

Good evening,
I have this problem with my BeX Analyzer.
I have import a Sap Note number 0001072913 to resolve a problem. To implement this note the SapNoteAssistant downloads these list of notes :
1061607
1066988
1083328
1086902.
I have applicate these list of notes, after the system doesn't make me anymore the popup to insert the selection of criteria filter of query.
My system information:
- OS - Windows XP sp.2
- Excel 2003
- SapGui 710 Final Release - Version 7100.1.5.1033 - Level Patch 5
- Sap System - SAP NetWeaver 2004s with SAPBW 700 Patch Level 7
- Database - Oracle 10.2.0.2.0
When I execute sapbexc710.xla in my local directory C:\Program files\Sap Shared\BW the system give me this result :
BI 7.10
AxInterop.SHDocVw.dll     7100.1.300.1
BExAddin.dll     7100.1.300.949
BExAnalyzer.exe     7100.1.300.949
BExAnalyzer.xla     7100.1.300.21
BExApi.dll     7100.1.300.949
BExCAControls.dll     7100.1.300.132
BExCommon.dll     7100.1.300.132
BExCommunication.dll     7100.1.300.132
BExControls.dll     7100.1.300.132
BExControls2.dll     7100.1.300.132
BExDialogOpenSave.dll     7100.1.300.132
BExDiffViewer.dll     7100.1.300.132
BExFormulaParser.dll     7100.1.300.132
BExGeneratedAll.dll     7100.1.300.132
BExInstaller.exe     7100.1.300.949
BExOpenSaveServices.dll     7100.1.300.110
BExQueryDesigner.dll     7100.1.300.519
BExQueryDesignerFormulaParser.dll     7100.1.300.2
BExQueryDesignerStarter.exe     7100.1.300.519
BExRDRuler.dll      7100.1.300.366
BExReportDesigner.dll     7100.1.300.366
BExReportDesignerStarter.exe     7100.1.300.366
BExSelectorAPI.dll     7100.1.300.230
BExSelectorDialog.dll     7100.1.300.230
BExSharedImageList.dll     7100.1.300.132
BExThemes.dll     7100.1.300.132
BExVariableScreen.dll     7100.1.300.949
BExWebApplicationDesigner.exe     7100.1.300.387
BExXMLControls.dll     7100.1.300.132
BExXMLServices.dll     7100.1.300.132
Interop.MSXML2.dll     3.0.0.0
Interop.SAPLogonCtrl.dll     7100.1.300.1
Interop.SHDocVw.dll     7100.1.300.1
SAP.Connector.dll     2.0.0.23
SAP.Connector.Rfc.dll     2.0.0.23
sapbwwmd.ocx     7100.0.4300.0
SAPWADMXHTML.dll     7100.1.201.2
WADBackendServices.dll     7100.1.300.387
WADBExData.dll     7100.1.300.387
WADBISPParse.dll     7100.1.300.387
WADChartControlHost.dll     7100.1.300.387
WADConst.dll     7100.1.300.387
WADControllib.dll     7100.1.300.387
WADConversion.dll     7100.1.300.387
WADHTMLEditHost.dll     7100.1.300.387
WADHTMLEditing.dll     7100.1.300.387
WADLowLevelServices.dll     7100.1.300.387
WADMain.dll     7100.1.300.387
WADMapControlHost.dll     7100.1.300.387
WADMetadataGeneration.dll     7100.1.300.387
WADMXHTML.dll     7100.1.300.4
WADPageobjects.dll     7100.1.300.387
WADPropertiesctl.dll     7100.1.300.387
WADRDHost.dll     7100.1.300.387
WADRDLoader.dll     7100.1.300.387
WADRTFIntellisense.dll     7100.1.300.387
WADRTFIsRegEx.dll     65176
WADServices.dll     7100.1.300.387
WADSnapShots.dll     7100.1.300.387
WADStyleSheetServices.dll     7100.1.300.387
WADTagLocator.dll     7100.1.300.387
WADTokenSearch.dll     7100.1.300.387
WADWizTemplate.dll     7100.1.300.387
sapbexc710.xla     7100.1.300.004
BW 3.5 Components
sapbex.xla     3500.11.051
sapbex0.xla     7100.0.300.525
wdba.dll     3500.11.0.58
wdbbapp.exe     3500.11.0.53
wdbbctrl.ocx     3500.11.0.139
wdbbwait.ani     6836
wdbcbexc.dll     3500.11.0.106
wdbdadpt.ocx     7005.11.0.202
wdbfodlg.dll     3500.11.0.128
wdbmbm2.ocx     3500.11.0.89
wdboobjb.dll     3500.11.0.39
wdbpwpub.exe     3500.11.0.341
wdbranim.exe     3500.11.0.5
wdbrlog.ocx     3500.11.0.596
wdbrlog.exe     3500.11.0.6
wdbrtre2.ocx     3500.11.0.11
wdbrprn.ocx     3500.11.0.1
wdbspres.dll     3500.11.0.151
wdbtask.exe     3500.11.0.23
wdbvVed.dll     3500.11.0.83
wdbwpub.exe     3500.11.0.131
wdbwwiz.dll     3500.11.0.78
wdbz.ocx     3500.11.0.14
bwcrw32.exe     1.0.0.4
MapObjects
af20.dll     2.0.1.0
aiimage20.dll     2.0.1.0
dforrt.dll     6.0.612.101
efileio.dll     6144
elib.dll     8.3.1.0
ergxlib.dll     9728
ethrlib.dll     8704
iso8211.dll     131072
libtiff.dll     352256
memfile.dll     1.0.0.1
memtable20.dll     2.0.1.0
mo20.ocx     2.0.1.0
mo20.lic     391
mobase.dll     2.0.1.0
mofeat.dll     2.0.1.0
mogridio.dll     2.0.1.0
mtch.dll     8.0.185.0
pe.dll     4.0.0.0
sg.dll     3.0.2.1
shape20.dll     2.0.1.0
OLE for OLAP
mdrmdlg.dll     3.6.0.1
mdrmsap.dll     3.6.0.1
mdxpars.dll     6405.5.23.15
saprfc.ini
scerrlkp.dll     3.6.0.1
SAP GUI core components
chart.ocx     3.80.6.87
icdataflow.ocx     2.0.0.23
icjoin.ocx     1.0.1.35
sapgradp.ocx     7100.1.5.479
sapcalen.ocx     7100.1.5.126
sapchart.ocx     7100.1.5.810
sapbtmp.dll     7100.1.0.1309
librfc32.dll     7100.1.81.5615
wdtlog.ocx     7100.1.5.71
wdttree.ocx     7100.1.5.286
wdtaocx.ocx     7100.1.5.61
sapdatap.ocx     7100.1.5.255
sapfctrl.dll     7100.1.5.320
sapfcust.exe     7100.1.5.410
sapfdraw.dll     7100.1.5.256
sapfewrm.dll     7100.1.5.337
sapfhook.dll     7100.1.5.206
SAPCHARTCONTROLLib.dll     6405.5.28.7809
AxMAPCONTROLLib.dll     1.0.0.0
AxSAPCHARTCONTROLLib.dll     6405.5.28.7809
MAPCONTROLLib.dll     1.0.0.0
Additional components
awkone.ocx     7.0.0.1
formx.ocx     2.0.30.1
sizerone.ocx     7.0.0.16
otxrt.dll     2.0.30.1
vsflex7l.ocx     7.0.0.112
vsocx32.ocx     5.0.4.50
vsocx6.ocx     6.0.0.52
Synfusion components
Syncfusion.Core.dll     4.402.0.51
Syncfusion.Grid.Base.dll     4.402.0.51
Syncfusion.Grid.windows.dll     4.402.0.51
Syncfusion.Shared.Base.dll     4.402.0.51
Syncfusion.Shared.Windows.dll     4.402.0.51
Syncfusion.Tools.Base.dll     4.402.0.51
Syncfusion.Tools.Windows.dll     4.402.0.51
Microsoft core components
dhtmled.ocx     6.1.0.9232
mfc42.dll     6.2.4131.0
msflxgrd.ocx     6.0.84.18
msvcp60.dll     6.2.3104.0
msvcrt.dll     7.0.2600.2180
msvcrt40.dll     5.1.2600.2180
oleaut32.dll     5.1.2600.3139
olepro32.dll     5.1.2600.2180
stdole2.tlb     3.50.5014.0
scrrun.dll     5.6.0.8820
triedit.dll     6.1.0.9227
richtx32.ocx     6.1.97.82
ADODB.dll     7.10.3077.0
dte.olb     7.10.3077.0
EnvDTE.dll     7.0.9466.0
Microsoft.mshtml.dll     7.0.3300.0
Microsoft.StdFormat.dll     7.0.9466.0
Microsoft.VisualBasic.Compatibility.Data.dll     7.10.3077.0
Microsoft.VisualBasic.Compatibility.dll     7.10.3077.0
MSDATASRC.dll     7.0.9466.0
MSO.DLL     10.0.6714.0
msoutl.olb     10.0.2607.0
Office.dll     11.0.5530.0
stdole.dll     7.0.9466.0
VSLangProj.dll     7.0.9466.0
Help me, please.

Is it just for one query or for all of them...(for all them)
If allowed in the system create a new one and check...(yes but the query don't work).
If it has effected all of them you can revert back the note changes.. Check again..
(to revert back the note is a disaster. There are more notes one above the other... I should set all the objects modified to original version one to one)
If it works now issue a message to SAP (I think it's a good idea)

Regarding SAP note 546256

Hi
This note implements a BADI so we can modify the log files of the SNP Opimizer.this Badi is for for adapting input log and results log of the optimizer.
When the Badi is active, a message is displayed in the input log, results log and message log.
but the above note is already implemented in our system,but user unable to change logs according to business need,?
basically this note helps to define user constraints in the log
Thanks
Poorna

Hi Surajit,
Please make sure the below mentioned Notes are implemented in the sequence given in order to get the changes related to Budget 2011
SAP Note 1558475- Amendments to IT calculation notified undercircular:08/2010.
SAP Note 1572614- Tax calculations inconsistent for emp. without a vaild PAN.
SAP Note 1575366- HINCALC0:Tax calculation inconsistent in case of invalid PAN.
SAP Note 1568264- Budget Changes 2011
Go through the text of the Notes for the pre-requisites and manual steps you need to perform.
Hope this help
Sarah

Regarding SAP notes for Budget-2007

Hi all
can anybody tell me the sequence the sap notes for budget 2007
as our client using 4.6 C version of SAP
helpful answer will get awarded
Thanks in Advance

hi Santosh
thanks for reply really valauable answer u have given
actually we r going to implicate the CIN for Budget -2007 and the current pacakge they r using is SAPKIPNG07
could u tell me please how to upgrade the Patch level actually i didn't do any upgrade but i will have to do
please give me the response of this
thanks

Regarding SAP Note implementation

Hello Friends,
my BW system was in SP4 so there were some NOTEs which were require to be implemented and related to SP5. so I had implemented those Notes and collected in TR, TR was in test system and now we are in SP05 so we have deleted the TR from test system buffer coz these NOTEs are not required now. now my doubt is as I had applied NOTE in development system so do i need to reset it or not, coz if I reset it then whatever the code changes done by NOTE will be removed. It may delete the code which might come with SP05(I mean, SP05 should have all the changes which we have applied when we r in SP04). so do i need to reset the NOTE or just leave it.
Regards,
Vijay

You can leave it there and then reset to orignal when new SP is implemented.
SAP will take care of it technically.
Regards,

Doubt regarding SAP Certification.

Hi Experts,
Iam new to this forum as well as SAP.
I have 3 years of experience in Microsoft ERP. So can i go for sap certification without any coaching in siemens.
Please suggest me the way to get the certification in my own.
I will be thankful if any one suggest me the links for applying directly for the exam.
Thank you.

Hi
Last time I checked with Siemens, they were very strict on the policy of ONLY SAP related work experience of atleast 2 years ONLY with a SAP customer / partner.
I doubt your case is such. Still, as mentioned before, go through some threads on this forum and also contact the SAP Education partners for more information. No one can be more accurate than them.
All the best !!
Regards
Z

Regarding SAP Note 410799 - Enhancement of line item extraction FI-GL, FI-C

Please read this note on this part:
.... Therefore you have to program a function module that reads the customer master in the R/3 system (table KANN1) and fills the ORT01 field of the customer enhancement. In the changing parameter C_STRUCTURE the filled fields of the extraction structure DTFIAR_3 are available to you. With the KUNNR field of extraction structure DTFIAR_3, you can select the respective master data record from table KNA1 and determine field ORT01 of the customer enhancement.....
How do I get access to the fields in C_STRUCTURE?
How do I fill fields in C_STRUCTURE?
thanks!

Hi,
This error due to that you are inserting duplicate records into DSO Key fields.
Check your record in PSA and remove duplicate reocrds from PSA and try to run transformation again or you need to change primary key of your DSO to fit PSA data.
Thank you,
Regards,
Govind.

Doubt regarding SAP Note application

Similar Messages

Maybe you are looking for