Doubt with applying RUP 6 - running the Technology Stack Validation Utility

Hi.
I am following note 444524.1 in installing the RUP 6.
On page 39, Section 5 Step 4, we are told, under "Applying this patch" :
Oracle Applications Technoilogy Updates for 11.i.ATG_PF.H.delta.6 (RUP 6) contains a unified patch driver to be applied with AutoPatch. Please apply the driver file on all application tier server nodes"
Then we are given the name of the driver.
I am a little lost here - how do we verify we have this driver applied ? Do we apply this after the RUP ?? ? ?
EBS 11.5.10
AIX 5.2
Oracle 9.2.0.8
Well, it appears that this is part of the adpatch utility, though there is no mention of this in the document. With other patches, when adpatch is not required there is no mention of it. In this document there is no mention of it, and yet we need it.
Edited by: Dan A on Dec 1, 2008 10:43 AM
Edited by: Dan A on Dec 1, 2008 10:48 AM

Dan,
Simply, use adpatch to apply 11i.ATG_PF.H.delta.6 (RUP6) patch driver "u5903765.drv".

Similar Messages

  • 11.5.10.2 Technology Stack Validation Patch - Database validation report

    Hi all,
    I am trying to upgrade Oracle EBS 11.5.10 to 11.5.10.2. As per the Oracle instruction i am running 11.5.10.2 Technology Stack Validation utility. For Node Type admin, Conc, Web, Forms its working fine. But when i run this for Database, its giving me same report as for both the Node Type. So i am not able to know whether database is compatible or not. Even though i have done all the steps as mentioned in the README for 4318672.
    Please advice.
    Regards,

    What about the report header? Does it show same info (node type, node name, context file, ..etc).
    Did you source the Database Oracle Home environment file on database server node as the owner of database server oracle home file system before running the technology validation utility?

  • Key board hangs up randomly with 8155B controller while running the application.

    Key board hangs up randomly with 8155B controller while running the application.

    Roopal,
    This question has too much parameters. In order to help you out, I need to know more information. For example:
    1) Is this a new issue? Has your keyboard worked fine before?
    2) Is you keyboard hanging up when you run a specific application? Does it hang up at boot up?
    3) What operating system are you running?
    Regards,
    Claudia Lorente
    Applications Engineer
    National Instruments
    http://www.ni.com/ask

  • Error message when run the Cisco CRS Serviceability Utility on UCCX 4.5 server

    Hi,
       Everytime i run the Cisco CRS Serviceability Utility from the UCCX server, this message always appear "Error reading System Parameters" before the interface appear.
       After that, when i click the "System Parameters" tab and there were no any information displayed.
      So, i would like to know if there were any way could fix this problem.
      Thanks for any suggestion.
    B.rgds,
    Tong

    Tong,
    The description that you are ginving us sounds preaty much like this bug : CSCsi25913
    This is the link with the informatio:
    http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?caller=pluginredirector&method=fetchBugDetails&bugId=CSCsi25913
    HTH
    Please rate this post if was helpful
    Walter Solano
    CCNA Voice
    Cisco UCCX Specialist

  • Doubt with creation of Model in the application Webdynpro Java

    Good Morning,
    I have the following doubts with the fields when i am creating a models in WebDynpro Java
    Model Package
    Source Fólder
    Default logical system name for model instances
    Default logical system name for RFC metadata
    Logical Dictionary
    Dictionary Type Package.
    Can Help me?
    Kind Regards

    Hi,
        Please check this link:
    [https://wiki.sdn.sap.com/wiki/display/WDJava/FAQ%20-%20Models%20-%20Adaptive%20Web%20Service]
    Thanks and Regards

  • How run the wsh and consperf utility

    Hi,
    I installed Mobile Server on IAS 10.1.2.0.2 and I am reading a white paper called "Oracle Lite In Depth", and I would like to know how can run the utilities of Oracle Lite: wsh and cosperf.exe.
    What I intended is:
    To start the wsh utility:
    C:\>wsh -L system/x@webtogo
    OKAPI error: okConnect=-3023
    WTG-10017: Failed to mount file system on WEBTOGO
    Respect to the consperf, the document mentions that I need to connect to the Repository and run the next select to get information that I requiered to use for the consperf. However, I execute the sentence in my the Database central and the result is: table or view doesn't exist:
    select publication
    from applications,
    app_publication
    where name=PUBSCOTT
    and app_id=5;

    for the consperf utility, the best way is via the mobile manager if you are on 10.2 (did not use to work correctly). as part of the details you will need to specify which publication items you want to analyse.
    In mobile manager go to data synchronisation>repository>publications>your pubplication>publication items. You will see a list of all the publication items part of the publication. column 1 is the internal name (begins WTGPI_ followed by a number), column 2 is the owner, column 3 the object name etc.
    take a note of the WTGPI numbers for the objects you want to analyse
    go to data synchronisation>performance>users (hidden in the text on the left)
    pick a user and press subscriptions.pick the application and press consperf performance analysis and then the link to set the parameters.
    You can leave the pubitem parameter with the default of <ALL>, but this make take a LONG time to run. Better to type into the field one or more WTGPI numbers seperated by commas (eg: WTGPI_10260,WTGPI_10261).
    I would also advise setting the tolerance to 1 rather than the default 20. First time leave everything else and press OK.
    You will get a spinning clock whilst it works. It sometimes does not return correctly, so press refresh from time to time.
    Once finished you will see links to 2 filestiming and execution plan. timing will compare execution of the different execution templates for sync, and MGP processing. In each set there will be a value with < > around it - this is the rtemplate being used. If there is a significantly smaller value in the same set, then you will be able to improve performance.
    to change the template being used, run consperf again with the same parameters and set AUTOTUNE to YES.
    There is a table in the mobileadmin schema c$consperf that will show publication items with specific templates rather than the default.
    NOTE i would suggest that the best approach to tuning is to set up the application and users and then run a couple of MGP apply/compose cycles. Look at the user details and you will see the execution time in milliseconds for each publication item. anything less than 1000 is probably not worth the effort, anything over 5-7000 definitely is. You may be able to get some improvement via consperf, but you will also need to look at the execution of the underlying query for the problem publication item. NOTE subsetting parameters as VARCHAR2, so check for typecasting if you use them, otherwise normal Oracle tuning techniques

  • Doubt with applying receipt

    Hi all,
    When we try to apply receipt for our transactions using receipts window,we have the option to apply the receipt to Credit Memos,*Debit Memo's* and our Invoice. Now,my doubt is.Is there any way where we could limit this so that i can apply my receipt only to Debit Memos.
    Navigation:
    Receivables Manager-->receipts-->Receipts
    Before this i have created Credit Memo and Debit Memo for this Invoice.
    Hope i am clear enough.
    Any help is appreciated,
    Thanks in advance!!

    Hi.
    Well, one way of achieving you goal is to use Forms Personalization. Each time a user chooses a transaction different from Debit Memo to apply the receipt, raise an error message and clear the record from the form. This is only one approach. Forms Personalization allow you to use different ways of achiving the same result using different methods.
    Octavio

  • Exclusion of BP, with TRM function when running the TCOD FDM_COLL_SEND01

    Hello Friends
    At the time of executing the FDM_COLL_SEND01 TCODE to all debtors, the system excludes all BP, which have different functions to UDM000 And FLCU00, excluding BP with TRM functions as TR0152, TR0151, TR0150, TR0100.
    But if these borrowers selected in the selection parameters, the PA seamlessly transferred these BP.
    Someone knows why this happens? and how do we solve?
    thank you very much
    Carolina

    Hi there,
    That gives me details of the error message and the configuration behind it but not how to resolve how to get the customer to create a BP?
    Thanks for your response.
    Regards,
    Corina.

  • If I create a document in pages 5.5 can I share it with someone who is running the previous version?

    I have upgraded to Yosemite and to Pages 5.5.  Now, it appears that every time I edit a Pages document using my new 5.5 version, that document cannot be opened by any of my colleagues who have not yet updated their OS and Pages software.  Is this correct?  If so, is there any way to save it as the previous version?

    A file format that is perpetually churned and incompatible with everything else?
    You do realise Apple is going to keep on doing this to you?
    All for something that is essentially crippled.
    Peter

  • Any way to run the airport ex. admin utility on OSX 10.3.9?

    Does anybody know a way to install the admin utility on OSX 10.3.9? All I want to do is confiugre the AEBS. I can live without the printer and disk sharing.
    I see there are some third party scripts for talking SNMP to the Airport. Are any of the third party apps a reasonable alternative?
    Thanks,
    Bill
    mac mini   Mac OS X (10.3.9)  

    I found this suggestion:
    As an option, here's a workaround...
    - Download the AirPort Base Station Update 2007-001 file from: http://www.apple.com/support/downloads/airportbasestationupdate2007001formac.htm l
    - Double-click AirPortBaseStationUpdate2007001.dmg to mount and display it's contents.
    - From the AirPortUtilityUpdate window, right-click on "AirPortBaseStationUpdate2007001.mpkg."
    - Select "Show Package Contents" from the pop-up menu.
    - In the "AirPortBaseStationUpdate2007001.mpkg window, double-click on the "Contents" folder to open it.
    - In the "Contents" window, double-click on the "Packages" folder to open it.
    - Right-click on "AirPortUtility.pkg."
    - Select "Show Package Contents" from the pop-up menu.
    - In the "AirPortUtility.pkg window, double-click on the "Contents" folder to open it.
    - Double-click on "Archive.pax.gz." This will create a new folder on your Desktop, named "Applications." The AirPort Utility will be inside this new folder. You can copy or move it to your Applications folder.
    However, I just wind up with a file called archive.pax on my desktop. Stuffit expander says it doesn't know how to open it.
    mac mini   Mac OS X (10.3.9)  

  • While running the cost : No valid source of supply could be found

    Hi Friends,
    When we have doing the  ck11n i got the this error meassge.
    No valid source of supply could be found , could u please give me clarification where i can fix this issue.
    Regards
    Mastan Reddy N

    Dear,
    F means Externally Procured Item, so system will not allow you to create Cost Estimate.
    Please change it to E and then create Cost Estimate, it will work.
    Br,Vivek

  • Technology Stack Inventory Validation Report r12.1

    How do you run the Technology Stack Inventory Validation Report on R12.1?
    I knew how to run it in 11i but it is not in the same place on R12.1

    Thanks,
    That provided some of what I was looking for but the Technology Stack Inventory Validation Report used to be
    $ADPERLPRG $ORACLE_HOME/appsutil/bin/TXKScript.pl
    -script=$ORACLE_HOME/appsutil/bin/txkVal11510MP.pl
    -txktop=$ORACLE_HOME/appsutil
    -appspass=<apps_password>
    -outfile=$ORACLE_HOME/appsutil/temp/txkVal11510MP_DB.html
    and the output looked like this:
    Technology Validation Utility report for 11.5.10 Maintainance Pack.
    ===================================================================
    The latest version of the Technology Validation Utility and instructions
    are available in Oracle MetaLink Note 259484.1 .
    Date :Mon Jun 28 16:19:52 2004
    Hostname :apposf45.us.oracle.com
    Node Type :Admin,Conc,DB,Web,Forms
    Instance :PROD_apposf45
    Platform :OSF1
    DB Host :apposf45.us.oracle.com
    Context File :/scratch/apps/disks/disk3/_apps_11510_ab_apps_prodappl/admin/PROD_apposf 45.xml
    Report File :/scratch/disk1/_apps_11510_ab1.5/temp/txkVal11510MP.txt
    Validation of Administration Server Node (apposf45):
    [PASS] Database version from dbms_utility 9.2.0.3.0
    [PASS] JOB_QUEUE_PROCESSES in parameter table 2
    [PASS] Undo management in parameter table AUTO
    [PASS] Database check confirms the fix for
    materialized view
    bug 2328821 has been applied.
    [PASS] Amount of temporary tablespace in MB 1500
    assigned to Apps Schema (determined
    by querying DBA_TEMP_FILES and
    DBA_USER)
    [PASS] UTL_RECOMP package is found in the
    database.
    [PASS] The patch 2949941 for UTL_RECOMP has
    been applied.
    [PASS] The parallel_max_servers parameter is 8
    set to
    [PASS] Your Applications database contains 3.0.9.8.4
    Portal version
    [PASS] Your Applications database contains 3.0.9.8.4
    Login Server version
    Validation of Concurrent Processing Server Node (apposf45):
    [PASS] 'X11 DISPLAY' parameter from the fuji01.us.oracle.com:35.0
    Applications Context file
    [PASS] JDK on Concurrent Processing node 1.3.1
    [PASS] AF_JRE_TOP, AF_CLASSPATH and AFJVAPRG
    variables are correct.
    ....

  • Not able to run the job with user id - is

    Hello experts,
    We have problem.
    Every day we run the job.
    ( the job contians two programs called  ZTIBCOPRG  and J_5HJSTP  )).
    I would like to know why the above job is running with the user ID TIBCOADM.  Because this user has German settings for the size conversion in program ZTIBCOPRG and we are having some issues.
    We changed the user to TIBCOUSA and the job would not run. 
    We have changed the user back to TIBCOADM.  It is running.
    KINDLY HELP ME WITH YOUR VALUABLE inputs.   YOUR HELP WILL BE HIGHLY APPRECIATED.
    I have checked for both users in AGR_USERS  table.
    The AGR_USERS is the old user and have many roles compared to userid TIBCOUSA.
    WHERE WE NEED TO SEE . IS it authorisation problem or the other user with whom unable to run the job ?
    or is this the error in the program ZTIBCOPRG which is not able to do size conversion and causing some issues.
    Thanks and Regards,

    Hi,
         after running the job with user id TIBCOUSA, it should be in cancelled state as per your comments.
    you just select the cancelled job and type JDBG in command box and enter it takes you to Debug mode.
    There you may get some information where it is failing.
    Sudheer. A

  • Doubt with index hint

    I have a doubt with applying the index hint to fire for multiple coulmns in a query.
    For a single column, it is ok like:-
    select /*+ index( ppbS_inv_sim_serial iss_status) */ item_type_id, status, city from
    ppbS_inv_sim_serial where status='IT';
    there is a problem with indexes firing in our database so this way, using hint, the
    indexes fire.
    But, what, if i want all 3 indexes in the query to fire like
    select count(1) from
    ppbS_inv_sim_serial where status='IT' and item_type_id='A2' and city='USA';
    I hope, my question is clear. Please, help i solving my doubt as it is urgent.
    regards.

    Fix the problem. Not the symptom.
    Using hints in SQL, especially production SQL, is a very poor way to address the problem and only fix the symptom for a period. Until the problem rears its head again and bite you in the butt - a lot more painful this time around.
    Solving performance problems start with Rule #1.
    RULE 1#. IDENTIFY THE PERFORMANCE PROBLEM
    Saying that something is slow, is not identifying the problem. The only way a problem can be solved is if you have at least some idea what the actual problem is.
    Identifying the problem will point to issues like:
    - database schema(s) not being analysed or analysed correctly
    - poorly designed and written SQL (often the case)
    - poorly configured Oracle instance
    - problem/bug(?) with the Oracle CBO
    And depending on the problem analysis, the problem can be CORRECTLY and COMPREHENSIVELY and PROPERLY addressed.
    Fixing symptoms? That is only moving the brick wall a bit further away. Allowing you to run even faster into it the next time around.

  • Could not run the web browser

    I've installed Reader 7.0.9 in order to read ebooks. When I try to activate the mobile device, reader responds with "Acrobat could not run the web browser. Unknown error. (0)". Is there a plug-in missing or corrupted control somewhere. Any suggestions. This is XP SP2 (and SP3) on a Dell Precision.
    Any suggestions.

    Let me amend my comment. Reader 7 might have been tested with XP SP2,
    but with all the changes in the OS due to security changes, OS changes
    and browser changes, Reader 8.1.3 or Reader 9 would be a better match to
    your software.
    Mike

Maybe you are looking for