Doubt with k7t turbo 2 and xp2600 +

Hi I have a K7T Turbo2 (MS-6330 Ver5.0) i've upgrade bios with ver. 3.60. My choice i to upgrade from xp2000+ to xp 2600+ but in amd website i've read that xp 2600+ support fsb 333. We known that turbo 2 have fsb 266. Mounting xp2600+ this can cause of a low performances? What powersupply wattage suggest?
Thanx in advance for answer
George

2700 is a 166 fsb 2600 is 133
http://www.msi.com.tw/program/support/cpu_support/cpu/spt_cpu_detail.php?UID=24%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20&NAME=MS-6330%20Ver5.0
antec enermax 430 watts,qtec 550 watt

Similar Messages

K7T Turbo LE and problems with IRQ routing Win98SE

When I boot my machine (AMD 1600+ on an MSI K7T Turbo Limited Edition), the BIOS reports me the following:
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Startech NIC in slot 2: IRQ 11
D-Link DFE-538 TX in slot 3: IRQ 10
Echo Mia soundcard in slot 4: IRQ 5
Onboard Promise ATA100 controller: IRQ 11
2x USB controllers Via 3038: IRQ 3 for each one
IDE controllers: IRQ 14 and 15
In "Settings - Control Panel - System - Device Manager", there's one big difference:
The two USB controllers (Via 3038 PCI to USB) are on IRQ 10!!! The only way for Via USB controllers to be on their real good one IRQ (3) is to completely disable "IRQ Steering" in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus".
To resolve this, I tried:
- different Via 4 in 1 (4.32, 4.35, 4.36): no changes
- Via IRQ miniport uninstalled: no changes
- Enable "PnP OS" and "ACPI" in the BIOS: no changes
- Tried all the combinations in "Settings - Control Panel - System - Device Manager - System Devices - PCI Bus - IRQ Steering" (except disabling IRQ Steering because like I said, it resolves the bug. Though, I want IRQ Steering to be enabled AND the bug resolved).
So, if anyone have a clue, it will be really appreciated.
Thanks in advance.
gugusse
- MSI K7T Turbo Limited Edition
- Athlon XP 1600+ (1.4ghz)
- Win 98SE with all the patches
- NIC Startech (Realtek 8139 chip) in PCI 2 (IRQ 11)
- NIC D-Link DFE-538 Tx in PCI 3 (IRQ 10)
- Echo Mia in PCI 4 (IRQ 5)
- SiS 6326 AGP card (doesn't take an IRQ!)
- HDD Quantum Fireball Lct-10 20 GB 5400 rpm on IDE 1
- HDD Maxtor 6 L080J4 80 GB 7200 rpm on second IDE of the Promise controller (running in standard IDE mode, not RAID)
- Plextor 8/4/32 (master) and CD-ROM 56x Affrey (slave) on IDE 2
- 4 in 1 v.4.35

Quote
SiS6326 AGP card: NA (no IRQ even if I enable "Assign IRQ to VGA" in BIOS, but that's not my problem)
Just thought that I would let you know that I have the same troubles with no IRQ being assigned by the BIOS and due to this I am having troubles getting a DUAL monitor set up running!
--David

K7T Turbo-R Limited Edition and USB

After doing whatever research I could in these forums, I really couldn't find solid answer so I'm posting my questions.
I have recently ordered a new case for my K7T Turbo-R Limited Edition (it's the red one) which has additional USB connections in the front of the case.
Am I going to be able to connect the board to the case so I can use those USB slots?

Hi Gregthos,
I remember there was something with these connections - I think they will only work with the bracket and for the PC2PC connection ...
There is at least 1 thread on this in the forum ... here
Hans

Problem with memory in k7t turbo limited ed.

serious problem!! i've got mainbord k7t turbo limited edition with vhipset via vt82c686b. untill now i had one 128 MB memory installed. I want to extend my memory but when i insert another memory to another slot computer does not start... (led status i all red!) no metter to with slot i insert new memory (its the right pc133 memory type) and no matter if it's 128 or 256 MB. Witho only one slot used it work properly even with 256 MB. Problem occurs only with 2 or more slots sed... this memory works with no problems in other computer (different mainboard)
PLEASE HELP!!!!
thanks in advance

Most times is due to incompatibility between memory modules. Best way to avoid it is to buy 2 modules same brand, or one bigger module.

K7T Turbo Limited Ed. and problems :(

Hallo
I have MSI K7T Turbo Limited Edition mobo (on KT133A). Yesterday something strange happened. I was surfing the net and suddenly my PC rebooted. After reboot I saw that in BIOS test, BIOS didin't detect my hard drives connected to first controller. CD-ROM and CD-RW were properly detected on the second controller.
I turn the PC off....waited about 30 seconds and turn it on. And everything was fine again. But in a short time it happened again. But now I heard something strange. I heard that both drives are stopping...slow down wnd stop. After a 1-2 sec. windows XP freezed and PC rebooted again :( And again there was no drives detected on first controller :(
I checked:
1. viruses - system is clean. I checked it with NAV2003 (within windows and dos - from bootable disc)
2. I tried to plug those 2 drives (15 GB Caviar and 15 GB Fujitsu) to the second controler (first was empty).
I asked some friends about it and one said that it could be power supply (maybe there is some instability or something).
Someone else told me that it could be a battery on the mobo (I have has this mobo for 2 years).
Or maybe it is a problem with motherboard? Maybe controller is damged....but...from the other hand when I restar the PC everythin works fine....some time :(
System: AMD XP1700+ (not overclocked), mobo as I said above, Radeon 8500, CD-ROM and CD-RW (pluged to second controller), Caviar 15 GB and Fujitsu (pluggeg do first controller), Windows XP with SP1.
I had no problems with that system befere.

Hi
I must check the type of that battery...but from the other hand if the battery was the problem it wouldn't keep all BIOS settings. Am I right? But it keeps.
Power supply is 300W - it is a kind off no-name (I bouhgt it with case 3 months ago and there was no problems befere :( )
I've already borrowed one - I'll check it later today (after work).

K7T Turbo and Windows XP shutdown issues

I have just finished building a machine and installing Windows XP. When I choose "shutdown" from the "start" (whose idea was that anyway?) menu it gets to the screen that says "It is now safe to turn off your computer" (or something to that effect) but all the system fans are still running. How do I get the system to shutdown completely?
The configuration:
MS Windows XP Professional with SP1 and ALL updates from windowsupdate.com
No other software installed (except for the drivers needed for the M/B)
MSI K7T Turbo with the latest BIOS from MSI's site
AMD 1400 Thunderbird w/PAL 8045 heatsink and fan
512 PC133 SDRAM
WD 40Gb HDD (set as master on IDE1)
Sony CD-RW (set as master on IDE2)
GeForce 2 MX 64Mb video
3Com 3c905 10/100 NIC
Integrated sound
Generic Modem
Generic floppy drive
I am going to be giving this system to my mother to use and want to make sure that it will turn off when she hits shutdown.
Any help/assistance would be greatly appreciated.
Thanks

Have you enabled ACPI?
http://support.microsoft.com/?kbid=810903
Are all devices acknowledged without errors in Device Mangaer?
Hope things work out! Send my best to your Mother, will you.

K7t turbo won't boot with xp1800+

I'm tyring to do an upgrade from my 1.4 tbird to a xp1800+ palomino. I have 2 sticks of pc133 crucial ram and a 300W sparkle psu. I've been running at 133 the entire time i've had the 1.4 cpu.
the bios will detect the 1800+ fine, but the computer always reboots when it gets to the "Starting windows xp" screen
what could be the problem?

Hi
I have also bought a new cpu (XP1800+) for my K7T Turbo and the day before I upgraded the cpu I updated the bios from 3.2 to 3.6
Then I upgraded the cpu, and have a lot of trouble!
The machine stops all kinds of places, it is very hard/tricky to turn it on, some times I need to restart it serveral times.
The led displays (D-LED) comes with different failure from stopping at early chipset initialization to testing vga bios and initializing keyboard controller.
I found that the default VCore is not the 1.750V as required by the XP1800+ and that the motherboard only supports VCore = 1.700V, set this by manual.
Then remember to remove the jumper on the board to work with cpu's at 133FSB.
These things helped me a lot, but my machine was still very unstable.
I have now downgraded my BIOS to ver. 3.2 and testet it for one day, and have not experienced any kind of problem, except that it does not recognize my cpu as a XP1800+ but runs at 1533 MHz
I think, that theres a bug in the BIOS ver. 3.6 for the motherboard! ??
This is also showed by the problems did'nt stop when I changed my cpu back to the old TB1000, and had the same problems as with the XP1800+
So my advise:
- set the VCore manually
- remove the jumper
- downgrade your bios
I have plans to upgrade my bios 0.1 version at a time, until it becomes unstable, and then go 0.1 version back.
Im writing a new thread on this subject to, where I will also write about my experince about the bios upgrades.
Good Luck!
Regards
Ronni

K7T TURBO and GeForce 4600

Hello all,
I am having trouble trying to put together my K7T TURBO MS 6330 with an ASUS V8460 (Ti 4600 Ultra Deluxe).
Specifically, I just replaced my old Oxygen card with the GeForce 4 one, and as soon as I installed the SmartDoctor 2 utility, I got the message (in red flashing text) :
" Your VGA card voltage 1.5 is out of safe bound. Motherboard doesn't supply with reliable
1.5 voltage.
Please contact with motherboard manufacturer for help."
(I've allready sent an email to MSI support, and still waiting.)
Furthermore, I've been experiencing sudden crashes (i.e. when I am using 3d applications) followed by a blue screen reporting an error message about a file that seems to belong to SmartDoctor folder.
I've read that ASUS vga cards are rather demanding as for power and voltage. Anyway, I'd like to ask everyone in the forum, if there is a safe and reliable way for the
K7T TURBO and the Ti 4600 to work together, perhaps with a motherboard BIOS update (I am still using ver. 2.7 since there was no need to flash it till now) or something...or maybe it would be a better thing to do, to install on my machine an MSI 4200 8x AGP card that is available, instead... or ... go back to my oxygen thingie... :(
My PSU is 420 Watt, and my cpu is Athlon 1200 with 768 mb ram.
Well, I just hope someone could help...
Thanks in advance

Hi all,
I forced my AGP bus to x2 a couple of minutes ago, and now I got a message from Smart(...) Doctor that my voltage is out of 3.3 V bound etc.. and a blue screen reporting UNEXPECTED KERNEL MODE TRAP (?).So, the situation is not improved...
I also put my sound card to another PCI slot, but I still had no luck at all. The thing is that unfortunately I have IRQ 11 being used by 6(!) devices: my gfx card, my scsi controller, my soundblaster, 2 VIA USB controllers and Microsoft ACPI Compliant System.Not very nice indeed.
I wonder if updating the motherboard's BIOS would do any good; btw, mine is ver.2.7, while the latest is 3.6 (!), but since I was ok till now, why bother flash it?
For the time being, I am not able to run 3D Mark 2k1 beyond benchmark #3, since it stops, leaving me on the desktop, while whenever I run Maya, winamp 3 and ACDSEE 4 simultaneously,after a while I get the blue screen of death, saying something about anvioctl.sys file - a SmartDoctor file hiding into system32/drivers. ?(

Blank screen after installing K7T turbo and AMD 2000+ chip

Hello, I got a problem, can anyone help me figure this out.
Currently I changed my old motherboard and replaced it with a K7t Turbo2 Motherboard and I also bought a AMD Xp 2000+ processor chip to go with it.
After installation, I encountered numberous problems like:
1. The computer will only turn on and off by the power source box at the back of the computer.
2. The reset button doesn't reset the computer at all.
3. I keep getting a blue screen when entering windows xp (forgot what the message said, but said something like, it did that to help windows or something).
Anyways after that, I formatted the hard drive. Re-installed it with Windows XP. Once the installation was completed, it automatically reset, the computer. BUT insatead it just gave a blank black screen while the computer is still on(I can tell because I can still hear the heat sink fan blowing).
Next, I turned the power switch (on the back) off and on again. The computer did successfully booted and it brought me to the windows xp's Window. I then logged off from windows and now I have this problem:
When turning the computer back on, the computer will boot up, then a few seconds later (about 3 to 5 seconds) the computer will shut right off.
Any questions or answers will be great appreciated.

HI. What version bios are you running? If its 3.0, you need to update your bios in order to run the 2000XP. Are you sure that your case wires for the switches are in the right place? One way you might try to test the psu, is to close jumper j17, This will make the cpu run at 100fsb. If it boots ok at 100 fsb, Then your power supply is probably the culprit.With j17 open, the cpu runs at full power,133fsb, and it takes more power to run. BIGDADDY51 CT.USA J17 is located just under the memory slots. edit: you mean power off and on by power supply switch? This is normal. Then you should be able to push the case switch and have the computer restart.Check your case wires again.

Doubt with Windows and Oracle Forms 10G and 11g

Hi
I have some doubts in installing Oracle Client on Windows.
a)Can we install Oracle Forms 10g and Reports 10g client on Windows 7?
b)Can we install Oracle Forms 11g and Reports 11g client on Windows XP?
c)If we have an Oracle Forms 11g and Reports 11g, can it connect to a 10g Server?
d)If we have an Oracle Forms 10g and Reports 10g Client, can it connect to an 11g Server?
Please, Can any one help me in this????

a)yes it can be installed on win7, may have some issues on 64bit systems but they're solvable
b)11g had some problems with windows 2000, but didn't see mention of any problems on XP
c)if you mean a database server then yes - i managed to connect 11g to an 8i database, so v10 should not be a problem. If you mean a forms/reports server..well newer forms/reports builder might not want to run old forms/reports and vice versa, but I don't see the point of operating on the same files from different versions. You can still load old form/report source files with a newer builder and recompile them to run on the new server.
d) the "client" is effectively your web browser with a java plugin, unless I misunderstood your question. What version was a form/report compiled with should not be an issue.

New duron 1300s and K7T Turbo 2

The only 200mhz FSB chips available from AMD seem to be duron 1300s. They are using this huge die, it looks like a palomino die.
When installed into a K7T Turbo 2 board they are detected as "Uknown CPU Type 1500+". Other then that they work just fine, they run at 1300mhz.
Is there going to be a BIOS update that will correctly identify these chips as duron 1300s?

I have a Duron 1300 on the same board....
But it's a 100FSB CPU and shows correctly....
Maybe you need to close J17?
As for a new BIOS, don't count to much on that....

Big problem (and doubts) with binding performance

In a JavaFX mobile application I'm developing, I have a sequence of objects and a simple form with a text field and a list of items. The list of items must be populated with the sequence; as the user types in the text field, the list gets filtered properly.
This worked perfectly with some mock data (a handful of items), but it's really a disaster after I've tried to throw in real data (1000 - 2000 elements). I don't know whether it's a bug of JavaFX, a bug of mine, or if binding must not be perused. Before posting the code, there's some guideline I should be aware of, such as the max. feasible size of a sequence?
BTW, I must say that I'm not even able to get a JSON file through a parser, instantiating objects and adding them to a sequence. It's painfully slow and basically I can't even see its going on after about 100 elements.

Now, the relevant part of the controller.
package it.tidalwave.bluebillmfx.taxon.controller;
import javafx.animation.Timeline;
import javafx.animation.KeyFrame;
import it.tidalwave.bluebillmfx.taxon.model.Taxonomy;
import it.tidalwave.bluebillmfx.taxon.model.Taxon;
public class TaxonomyBrowsingScreenController
    public var selectedTaxon: Taxon;
    public var taxonomy: Taxonomy;
    public var filter: String = "";
    var leading = "";
    function matches (taxon : Taxon, string: String) : Boolean
        def m = (string == "") or taxon.displayName.toLowerCase().startsWith(string.toLowerCase());
        println("matches({taxon}, *{string}*) => {m}");
        return m;
    public var filteredSpecies = bind taxonomy.species[species|matches(species, filter)] on replace
        println("trigger begins");
        leading = commonRoot(filteredSpecies);
//        println("Selected {userInput} -> {filteredSpecies}");
        if ((leading != "") and (filter != leading))
            println("ROOT: {leading}");
        if (sizeof filteredSpecies == 1)
            selectedTaxon = filteredSpecies[0];
            println("SINGLE SELECTION {selectedTaxon}");
        else
            selectedTaxon = null;
        println("trigger ends");
}Edited by: Fabrizio.Giudici on May 21, 2009 1:42 AM

Doubts with the renditions for the new ipad and ipad 1 and 2.

Hi,
I will start doing a layout for a publication with two renditions (for Ipad1 and 2, and for the new ipad).
I have read the document
"Best practices for using Adobe DPS to publish to the new iphone"
http://blogs.adobe.com/digitalpublishing/files/2012/03/DPS_iPad3_bestp ractice.pdf
It recommended creating an Indesign document of 1024x768 pixels and working with images in high and low resolution in different layers to then pass them to Folio builder for renditions of 2048 with high ones and 1024 with the low ones.
I just worry about making two versions of the named "pass-through overlays"? (video, image sequence, panorama and pan / zoom).
And what about the slideshows? This content is resampled although you use the PDF image format.
If I'm working on a document of 1024x768, and the states of object include text, will be pixelated when fit to the 2048 size in the rendition?
I would greatly appreciate a response as soon as possible. I do not have one of the new iPads and am afraid I will not be able to see the result.
Thank you.

What is your worry about making two versions of the pass-through overlays? As long as you put each version (SD and HD) on a separate layer, and then turn the layer off/on appropriately when adding the InDesign document to the appropriate SD or HD folio you'll be fine.
Similarly, with the resampled overlays, you can if you choose make two versions of the overlay on separate layers, one for SD and one for HD, to ensure the resolution image you want is used for each version. In practice you only really have to do this if you have text in the image somewhere. For straight image content without text you can, generally speaking, put the high-res asset in and let InDesign resample it down to SD for you when adding the InDesign file to the SD folio.
Neil

Getting K7T Turbo limited edition what is the fastest processor it will run

As the subject sugests my friend is about to give me his motherboard, ram and cpu the motherboard is a K7T Turbo-R (I'm assured this is the limited edition one) but he only has a slow old 1ghz processor on it. I've looked at the bios upgrades and I'm not sure what the fastest chip is that I can fit with the latest bios upgrade as it's written in funny english. It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only) does this mean both chips are only supported on the turbo 2 or just the 2600+. My educated guess tells me that I would be able to fit a 2400+ as this is a 133/266 FSB processor but not the 2600+ as this is 333mhz. Please can someone help me I'm just starting to learn about computers and I don't really know what I'm talking about!

Hello,
If you are sure it is the limited edition then
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=25&kind=1
"It says: Support AMD XP 2400+ & 2600+ (K7T Turbo2 only)"
That lines means only the K7T Turbo2 supports the XP2400 and XP2600
(non 166FSB versions )
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_cpu_support_detail.php?UID=24&kind=1
See they are 2 different boards?

K7T Turbo Limited Edition + Raid

Im Planning to upgrade to a K7T Turbo Limited Edition + Raid (MS-6330 3.0) with an XP 2000.... are there any issues with the board with this CPU? According to the bios updates theysupport up to XP2600+'s... im not going ddr yet, prices are WAY to high.
Just need somethin a bit faster than this Duron 900

LOL
Ok... check here:
link
only one K7T Turbo2 : link
And here : link
there have a lot of MS-6330's, don't buy any of them as those are obsolete model. Go for K7T Turbo2.

Doubt with k7t turbo 2 and xp2600 +

Similar Messages

Maybe you are looking for