Doubts about Hibernation Mode in imac

Hi!
I have some doubts about hibernation modes in my imac.
Some times the hibernation led pulses, sometimes just stays on.
Can anyone explain if there are any diference between this two hibernation modes?
Thanks a lot.
Vidal

If it is in hibernation, it should pulse. If the machine has got to the point where the screen has turned off but the computer has not gone to sleep yet, the light will not pulse. Check your energy saver settings in your system preferences.
Some applications can prevent a proper hibernation and while the screen will turn black, the system will not sleep properly and the light will not pulse.
Karn.

Similar Messages

Doubt about uses of OBIEE

I have some doubts about the possible uses of OBIEE. It happens that using OBIEE sometimes users demand report of an "analytical" type, that is aggregated analysis through OBIEE’s Answers, selecting data from dimension tables and measures from fact tables. That’s the ordinary purpose of business intelligence tools!!!
Some other times though, users demand to perform through Answers analyses of an "operating" type, that is simple extractions of some fields belonging to dimension tables, linked between each other through joins, (hence without querying fact tables): that happens because some of the tables brought in the datawarehouse are not directly linked to any fact table. In this way users want to use Answers to visualize data even for this kind of extractions (or operating reports).
Is this a correct use of the tool or is it just a “twisted” way of using it, always leading eventually to incorrect extractions? If that’s the case, is it possible to use instead BI Publisher, extracting the dataset through the "Sql Query" mode in a visual manner? The problem of the latter solution, in my case, relies in the fact that users are not enough skilled from the technical point of view: they would prefer to use Answers for every extraction, belonging both to the first type (aggregations) and the second one (extractions), that I just described. Can you suggest a methodology to clarify this situation?

Hi,
I understand your point... But I think OBIEE doesn't allow having dimension "on their own", they must be joined to a fact table somehow. This way, when you do a query in answers using fields of two dimension tables a fact table should be always involved. When dimensions are conformed, several fact tables may be used, and OBIEE uses the "best" one in terms of performance. However, there are some tricks that you can do to make sure a particular fact table is used, like using the "implicit fact column" in the presentation layer.
So back to your point, using OBIEE for "operational" reporting as you call it is a valid option in my experience, but you have to make sure that the underlaying star schema supports the logic that your end users expect when they use just dimension fields.
Regards,

Doubt about Tunning View Objects

Hi !. I have the following doubt about tunning View Objects:
If I have the following configuration on a VO:
All Rows
In Batches Of: 11
As Needed
Access Mode: Scrollable
Range Size: 10
Total Records On The Table: More than 100
What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.

I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
So if the cursor is already open, no need to issue another query.
You can use the HTTP Analyzer to watch network traffic
Monitoring ADF Pages Round-Trips with the HTTP Analyzer
And you can use the logging features of ADF to see the queries being executed.
Declarative View Objects (VOs) for better ADF performance

Hibernation Mode problems!

Hi,
I've had a PowerBook G4 for a good few years now and the sleep mode on it was great, close the lid, it's in sleep, safe to throw in a bag without risk of scratching the hard disk. I've just purchased a MacBook Pro and it takes 10 seconds to sleep!
After some research I found that the MacBook Pro's default option is to SafeSleep, meaning everytime I ask it to sleep it writes the RAM to disk before actually sleeping, this is what takes the time!
I found a solution on Macworld,
Using these four commands I was able to check, change, and then remove the hibernation image from the disk, freeing up 2GB of space.
$ pmset -g | grep hibernatemode
sudo pmset -a hibernatemode 0
cd /var/vm
sudo rm sleepimage
All great, the computer went to sleep virtually instantly, and woke up instantly too. However, it keeps changing back to option 3, rather than 0. Here is the link to that page incase i've not explained very well, http://www.macworld.com/article/53471/2006/10/sleepmode.html .
So in short, my problem is that I can't get the computer to stay in Hibernation Mode 0!
Any help at all would be greatly appreciated.
Thanks
Wilko

Looks like you missed setting it in non-volatile RAM ...
$ sudo pmset -a hibernatemode 0
$ sudo nvram "use-nvramrc?"=false
$ sudo rm /private/var/vm/sleepimage
The other way to get 2 second sleep is to hold down Command-Option and then press the Eject button for about 2 seconds
See: http://www.apple.com/pro/tips/quicksleep.html

Doubts about performance:

Doubts about performance:
Hi:
In my work we have performance problems with the database (Oracle 9i v. 2), we have said that the TOAD consumes a lot of resources.
I know how to affect the performance of the database using a tool such as the toad.. ?
It is true that the use of inner join and left join instead of = and (+) is better?
Thanks

This is too broad a question.
Toad can fire random sql.
sql*plus can fire random sql.
Why would Toad be the problem?
You would need to gather statspack data to demonstrate this.
Sybrand,
Agreed on it and its a relevant point.But I guess he is not worried about the db performance.Anyways lets see what OP says.
Inner join and left join will always use CBO (Cost Based Optimizer) instead of RBO.
I am not sure that I have read that anywhere. They came into Oracle in 9i where optimizer mode was choose as the default one. Just by the syntax, oracle would push them to use CBO as the default one,I am not sure about this. Even if we are having + symbol and have the stats,Oracle wold go for CBO right?Can you please point me to some where in the docs where it is mentioned that using this keywords,Oracle would use only CBO?
Aman....

Laptop not responding after hibernation mode is set off

I had kept my laptop in hibernation mode before going out..After coming back when i pressed a key, the screen remained blank..i doubted if battery was down so plugged it in too, but no change. I can only see the green light for battery on and also the sign just near the power on button showing green light..the sign is a circle with a slanting z .. please help

Clear out the cache memory.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.com/blogspot.com

There is a lot of talk aout there about using a 27" iMac as a display with the mini displayport to displayport cable. It is so exciting! I am trying to connect a PC laptop with a VGA port to a 27" Dell Latitude D620?

In 2010 there was a question about using a 27" iMac as a display with a Dell laptop.
I am trying to connect a work Dell laptop Running Windows XP via a VGA cable to my personal iMac 27"
running iMac 27", Mac OS X (10.6)
Has anyone tried this or know if imac 27" Mini port with a VGA adapter can work?
I apologize if I missed this discussion already
Kind Regards
Gilly

Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

Doubt about a null value assigned to a String variable

Hi,
I have a doubt about a behavior when assigning a null value to a string variable and then seeing the output, the code is the next one:
public static void main(String[] args) {
        String total = null;
        System.out.println(total);
        total = total+"one";
        System.out.println(total);
}the doubt comes when i see the output, the output i get is this:
null
nulloneA variable with null value means it does not contains a reference to an object in memory, so the question is why the null is printed when i concatenate the total variable which has a null value with the string "one".
Is the null value converted to string ??
Please clarify
Regards and thanks!
Carlos

null is a keyword to inform compiler that the reference contain nothingNo. 'null' is not a keyword, it is a literal. Beyond that the compiler doesn't care. It has a runtime value as well.
total contains null value means it does not have memory,No, it means it refers to nothing, as opposed to referring to an object.
for representation purpose it contain "null"No. println(String) has special behaviour if the argument is null. This is documented and has already been described above. Your handwaving about 'for representation purpose' is meaningless. The compiler and the JVM don't know the purpose of the code.
e.g. this keyword shows a hash value instead of memory addressNo it doesn't: it depends entirely on the actual class of the object referred to by 'this', and specifically what its toString() method does.
similarly "total" maps null as a literal.Completely meaningless. "total" doesn't 'map' anything, it is just a literal. The behaviour you describe is a property of the string concatenation operator, not of string literals.
I hope you can understand this.Nobody could understand it. It is compete nonsense. The correct answer has already been given. Please read the thread before you contribute.

Time Machine stops due to computer going into Sleep/Hibernation Mode

Time Machine stops due to computer going into Sleep/Hibernation Mode then restarts to try to start the Back up process again and again vicious cycle. I have made sure all settings are turned off. I have done one or two backups since the initial first backup. My HDD is almost full and I want it backed up before I try to clone/mirror the drive to upgrade it to a 1TB HDD. Thank you in advance.

Set the Energy Saver (in System Preferences) to Never. Then reset the NVRAM, as follows:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the third time.
Release the keys.

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

Hi, I loaded Windows 7 Pro w/XP mode and iMac USB show working properly in device manager, but i cannot see a USB flash drive, or my Mac Superdrive. Does anyone have a suggestion? Thanks!

MacDrive to provide better HFS support.
And to acces and write.

What can I do about my 20 inch iMac (Core Duo) doing a LOT of disk activity?

What can I do about my 20 inch iMac (Core Duo) doing a LOT of disk activity?
I have iStat and can see the disk activity which halks other operations till it finishes.
Is there some built-in Optimization software I should use?
Thanks,
Tom

Please carefully read Pondini's Time Machine Troubleshooting guide.

About to Buy The iMac (Stop Me?)

I am about to buy the iMac, possibly today. I was wondering a couple of things.
-Should I wait for 10.5 to come pre-installed on them?
-How are they, work wise, look wise, function wise (for the owners)?

*Hi CA..., Welcome* to Apple's Users Help Users Forums.
*Francine Schweider* a |||| bar poster in these forums has what I think is an excellent thought.
"I plan to buy my next computer before Leopard comes out. Why? Because generally new Mac computers will not run any system older than the one they ship with, I want to be able to use the fully mature Tiger system, rather than having to rely entirely on Leopard. Who knows whether the software I own will be fully compatible with Leopard? Or how long it will take for developers (think Adobe) to update if there are incompatibilities with Leopard. Or even just how stable and reliable and all like that Leopard will be.
Francine"
Enjoy your new Mac, JP
*The specifics:*
http://www.apple.com/macosx/uptodate/
Enjoy

Doubt about Select statement.

Hi folks!!
             I have a few doubts about the select statements, it may be a silly things but its useful for me.
what is   difference between below statment.
1)SELECT * FROM TABLE.
2)SELECT SINGLE * FROM TABLE
3)SELECT SINGLE FROM TABLE.
Hope i will get answer,thanks in advance.
Regards
Richie..

Hi,
try this and if possible use sap help.i mean place the cursor on select and press F1.
             Types of select statements:
1.     select * from ztxlfa1 into table it.
             This is simple select statement to fetch all the data of db table into internal table it.
   2.   select * from ztxlfa1 into table it where lifnr between 'V2' and 'V5'.
        Thisis using where condition between v2 and v5.
4. select * from ztxlfa1 where land1 = 'DE'. "row goes into default table work Area
5. select lifnr land1 from ztxlfa1
        into corresponding fields of it   "notice 'table' is omitted
         where land1 = 'DE'.
          append it.
           endselect.
     Now data will go into work area. and then u will add it to internal table by
        append statement.
6.   Table 13.2 contains a list of the various forms of select as it is used with internal tables and their relative efficiency. They are in descending order of most-to-least efficient.
Table 13.2 Various Forms of SELECT when Filling an Internal Table
Statement(s)                                   Writes To
select into table it                                    Body
select into corresponding fields of table it   Body
select into it                                    Header line
select into corresponding fields of it           Header line
7. SELECT VBRK~VBELN
       VBRK~VKORG
       VBRK~FKDAT
       VBRK~NETWR
       VBRK~WAERK
       TVKOT~VTEXT
       T001~BUKRS
       T001~BUTXT
    INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
    FROM VBRK
    INNER JOIN TVKOT ON VBRKVKORG = TVKOTVKORG
    INNER JOIN T001 ON VBRKBUKRS = T001BUKRS
    WHERE VBELN IN DOCNUM AND VBRK~FKSTO = ''
   AND VBRK~FKDAT in date.
Select statement using inner joins for vbrk and t001 and tvkot table for this case based on the conditions
8. SELECT T001W~NAME1 INTO TABLE IT1_T001W
FROM T001W INNER JOIN EKPO ON T001WWERKS = EKPOWERKS
WHERE EKPO~EBELN = PURORD.
here selecting a single field into table it1_t001winner join on ekpo.
9. SELECT BUKRS LIFNR EBELN FROM EKKO INTO CORRESPONDING FIELDS OF IT_EKKO WHERE     EBELN IN P_O_NO.
ENDSELECT.
SELECT BUTXT   FROM T001 INTO IT_T001 FOR ALL ENTRIES IN IT_EKKO WHERE BUKRS = IT_EKKO-BUKRS.
ENDSELECT.
APPEND IT_T001.
here I am using for all entries statement with select statement. Both joins and for all entries used to fetch the data on condition but for all entries is the best one.
10. SELECT AVBELN BVTEXT AFKDAT CBUTXT ANETWR AWAERK INTO TABLE ITAB
             FROM VBRK AS A
             INNER JOIN TVKOT AS B ON
             AVKORG EQ BVKORG
             INNER JOIN T001 AS C ON
             ABUKRS EQ CBUKRS
             WHERE AVBELN IN BDOCU AND AFKSTO EQ ' ' AND B~SPRAS EQ
             SY-LANGU
             AND AFKDAT IN BDATE AND AVBELN EQ ANY ( SELECT VBELN FROM
            VBRP WHERE VBRP~MATNR EQ ITEMS ).
    Here we are using sub query in inner join specified in brackets.
Thanks,
chandu.

Podcasts are no longer being automatically updated after hibernation mode

Heeello to you all!
I noticed that after going to hibernation mode (the motherboards suspend to disk functionality) the schedule for my podcast updates is messed up. For example now is Feb 22nd 2007, 21.14 and my iTunes says that it wants to search for new episodes on August 13th 2006, 23:57. This means that the podcasts are not being updated automatically after hibernation. How to reproduce this bug in iTunes:
1.) Start iTunes
2.) Set up: Search for new episodes hourly in Podcasts settings.
3.) Close the settings window.
4.) Leave iTunes running.
5.) Go to hibernation mode (This mode may need to be activated in the system settings: System Settings -> Engergy Options) by klicking Start -> Turn off Computer -> holding shift while clicking on Standby ("Standby" changes to "Hibernate")
6.) Turn the computer back on and have a look in the iTunes settings: In my case you find senseless time and date for the next podcast-update.
Is anyone able to reproduce this error?
And is Apple please able to fix this if this is truly a bug?
Regards,
Asks always good questions
P.S.: The english terminology differs most probably from the reality because I happen to use a german language system.
PPS: Yes i use the newest iTunes and Windows xp updates
Super Windows Computer! Windows XP Pro

I tried this on several other computers and I was able to reproduce this bug on every single one. Very amazing that I am the only one complaining.
Regards,
Asks always good questions

Doubt about Bulk Collect with LIMIT

Hi
I have a Doubt about Bulk collect , When is done Commit
I Get a example in PSOUG
http://psoug.org/reference/array_processing.html
CREATE TABLE servers2 AS
SELECT *
FROM servers
WHERE 1=2;
DECLARE
CURSOR s_cur IS
SELECT *
FROM servers;
TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
s_array fetch_array;
BEGIN
OPEN s_cur;
LOOP
    FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
    FORALL i IN 1..s_array.COUNT
    INSERT INTO servers2 VALUES s_array(i);
    EXIT WHEN s_cur%NOTFOUND;
END LOOP;
CLOSE s_cur;
COMMIT;
END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
could crash redo log ?
using 9.2.08

muttleychess wrote:
If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
SY.

Doubts about Hibernation Mode in imac

Similar Messages

Maybe you are looking for