Doubts about result table in endeca 3.1

Hi All,
I created the result table in Endeca 2.4 by using the checkbox for Use EQL query and entered the query but I cannot see the option of entering the eql in endeca 3.1.Has something changed or I have missed something?
and In order to enable drill down  in endeca 2.4 I added an action column to pick the event ID available on a particular row. Clicked on Add Action Column button under Configuration tab and added teh action but cannot see samething in endeca 3.1.
Can some one please let me know how can above things be achieved in endeca 3.1
Thanks in Advance.

In 3.1 for Results Table, you do not enter EQL. Instead, you set the table type to Analytics table, then add the metrics and dimensions. For simple metrics, you just add the attribute and select the aggregation method. For more complex metrics, you would need to add the metric as a predefined metric in the view. You could then add that metric to the table.
Here's a link to the section of the Studio User's Guide that talks about configuring a Results Table:
Configuring a Results Table
And here's a link to general information about adding data to components in 3.1:
Selecting and configuring the data displayed on a component

Similar Messages

  • Doubts about Temporary Table.

    Hi,
    I am using Temporary Table.
    But the insert command takes too much time compare to insert in Normal table.
    One more doubt about Temporary Table is:
    Suppose there are two different users. They connect and first insert rows of their use .Now they go for select.
    Does select of one user goes to check the rows of second user also or the temporary table treats 2 users data as inserted in 2 different tables?
    Help!!!

    Nested structure (not deep - deep means their a string or a table as a component)
    TYPES: BEGIN OF tp_header_type,
             BEGIN OF d,
               empresa TYPE ...
               num_docsap TYPE ...
            END OF d,
            awkey TYPE ...
          END OF tp_header_type.
    matt

  • Small doubt(about pivot table)

    while creating a report i am getting error in Table view,if i create a same report in pivot view it is working fine in pivot view.
    after this i want to add this view to the compound view then i will have to delete the table view from the compound view .but while adding the pivot view to the compound view it is throwing error because by default compound view has only table view and tital view.it is not allowing me to add pivot view to the compound view.
    can anyone suggest me is there any other way i can add the pivot view to compoud view i want to view the title view and pivot view only in the compond view.(here the problem is i am unable to add pivot view to the compound view because error in the table view)

    Actually i placed couple of column in the excluded. now its working fine. i just want to know how can i add pivot tabler to the compound view at this situation

  • Doubt about KONV table

    hi friends,
    i am selecting the sales order details and conditions from konv table but
    when i am checking the va03 my condition amount is 2.000%
    but in konv table it is 20.00 ,why is it so?
    how can i calculate it correctly?
    thanks & regards
    srinivas

    Yes it is you are using non primary key.. try to pass fiscal year and priod too .. you may get it bit faster.
    thanks
    mahesh

  • Doubt about FLASHBACK TABLE

    Dear Members,
    I am doing FLASHBACK TABLE as sys user. I know that FLASHBACK TABLE can not be used for user SYS ,
    still I successfully execute this command with to before drop clouse and
    when i execute this command with to timestamp clouse , I get error.
    Can some one please tell me why this is happening ?
    ORACLE : 11gR2
    OS : FEDORA 14
    $ sqlplus / as sysdba
    SQL> insert into t11 values('k');
    1 row created.
    SQL> !date;
    Wed May 30 15:45:13 IST 2012
    SQL> insert into t11 values('z');
    1 row created.
    SQL> drop table t11;
    Table dropped.
    SQL> select * from dba_recyclebin;
    OWNER               OBJECT_NAME          ORIGINAL_NAME          OPERATION TYPE               TS_NAME               CREATETIME     DROPTIME          DROPSCN PARTITION_NAME          CAN CAN     RELATED BASE_OBJECT PURGE_OBJECT SPACE
    SYS               BIN$wT5v1Gw96zbgQGSsOaoM4g==$0 T11               DROP     TABLE               NISHANT               2012-05-30:14:47:37 2012-05-30:15:45:36 17728226                    YES YES     85115 85115     85115     8
    SQL> flashback table "BIN$wT5v1Gw96zbgQGSsOaoM4g==$0" to timestamp to_time('30/05/2012 15:45:13','dd/mm/yyyy hh24:mi:ss');
    flashback table "BIN$wT5v1Gw96zbgQGSsOaoM4g==$0" to timestamp to_time('30/05/2012 15:45:13','dd/mm/yyyy hh24:mi:ss')
    ERROR at line 1:
    ORA-08185: Flashback not supported for user SYS
    SQL> flashback table "BIN$wT5v1Gw96zbgQGSsOaoM4g==$0" to before drop;
    Flashback complete.

    Hi,
    As far as i know, recyclebin doesn't work for SYS schema. The same i have tested on my 11.2.0.3 test database -
    18:12:22 SQL> select * from dba_recyclebin;
    no rows selected
    18:12:23 SQL> show user
    USER is "SYS"
    18:12:27 SQL>
    18:12:28 SQL> create table a (x number);
    Table created.
    18:12:35 SQL> insert into a values (1);
    1 row created.
    18:12:36 SQL> insert into a values (2);
    1 row created.
    18:12:36 SQL> insert into a values (3);
    1 row created.
    18:12:37 SQL> select * from a;
             X
             1
             2
             3
    18:12:38 SQL> commit;
    Commit complete.
    18:12:39 SQL> drop table a;
    Table dropped.
    18:12:46 SQL> select * from recyclebin;
    no rows selected
    18:12:48 SQL> select * from dba_recyclebin;
    no rows selected
    18:13:00 SQL>Can you please check back again.
    Edited by: Anand.. on May 30, 2012 6:19 PM --> Update --> It was my mistake, didn;t check the ts_name column. The object is created in non-system tablespace.

  • Doubt  about COEP table

    Hi ,
       I was looking at table COEP by objnr_n1 and kstar fields and found that it is taking almost 5 to 10mins to execute.
    Is it the general case with this table or is it only with my sap system.
    thx
    Raghu

    Yes it is you are using non primary key.. try to pass fiscal year and priod too .. you may get it bit faster.
    thanks
    mahesh

  • Doubts about a table.

    Hi guys , i have the follow.code  that a  friend of mine gave me  ,  but i ´ve never seen before code like this gs_hd-d-empresa, it has two hyphens !!! , how should I declare tp_header  ? is not declare in the code  anywhere. Is a special type of table ?
    DATA: gt_doc     TYPE TABLE OF zcmest_prvconf,
            gt_hd      TYPE TABLE OF tp_header,
            gs_hd      TYPE tp_header,
            lv_belnr   TYPE belnr_d,
            lv_gjahr   TYPE gjahr,
            lv_hkont   TYPE hkont,
            lv_bvorg   TYPE bvorg.
      SELECT  bkpf~bukrs     bkpf~belnr    bkpf~gjahr
              bkpf~blart     bkpf~budat    bkpf~cpudt
              bkpf~cputm     bkpf~xblnr    bkpf~bktxt
              bkpf~waers     bkpf~hwaer    bkpf~bvorg
              bkpf~xreversal bkpf~stgrd    bkpf~stblg
              bkpf~awkey
        INTO (gs_hd-d-empresa,   gs_hd-d-num_docsap, gs_hd-d-exercicio,
              gs_hd-d-tip_doc,   gs_hd-d-dt_lanc,    gs_hd-d-dt_dia,
              gs_hd-d-hr_ent,    gs_hd-d-ref_sap,    gs_hd-d-txt_cabdoc,
              gs_hd-d-moeda_doc, gs_hd-d-moeda_emp,  gs_hd-d-num_intemp,
              gs_hd-d-ind_est,   gs_hd-d-cod_est,    gs_hd-d-doc_est,
              gs_hd-awkey)
        FROM  bsis
        JOIN  bkpf
          ON  bkpf~bukrs = bsis~bukrs
         AND  bkpf~belnr = bsis~belnr
         AND  bkpf~gjahr = bsis~gjahr
    Thank you very much.

    Nested structure (not deep - deep means their a string or a table as a component)
    TYPES: BEGIN OF tp_header_type,
             BEGIN OF d,
               empresa TYPE ...
               num_docsap TYPE ...
            END OF d,
            awkey TYPE ...
          END OF tp_header_type.
    matt

  • Doubtful about security of oracle's Wrap code!

    Dears
    I am little bit doubtful about security of oracle's own Wrap code like package "sys.utl_smtp" .
    Someone can easily Unwrap it without source code?
    How it possible? whats your opinion about this? please can anybody clear me.
    Regards
    Abdul Halim
    Edited by: Abdul Halim on May 31, 2013 8:14 PM

    Halm, you are operating under the mistaken belief that your code deserves hiding from the customer and competitors to begin with. Why? All you are doing in the code is performing DML. It is not like your application is the only one in the world that performs its function.
    If someone really wanted to they could figure out what your code is basically doing just by looking at the table and file data before and after running the code. By careful manipulation of the data and studying the results they can figure out what is being done and then develop their own specific of the how it is done. One can also look at Oracle's internals as the code is being processed both using Oracle provided views and direct peaking at Oracle's shared memory. Then there are tools like sql trace which will captute the SQL, waits, and binds for the process.
    But all of this is kind of mute in that most shops do not have the talent to write their own unwrapper nor has the shop purchased an unwrapper so if you wrap the code it is going to be secured from most users and competitiors. I would just recommend that potential customers not purchase your product becuase the customer is going to need access to the code either for debugging (bugs will exist in the code) or tuning. Likely both.
    IMHO -- Mark D Powell --

  • How to control selected row in result table on a search page?

    Using JDeveloper 10.1.3.2.0
    I have attempted to create an ADF page that contains a search and result table in the same page.
    I have questions related to the result table. Let's say the result table shows 10 rows per page.
    If I page forward there is no default selected row "clicked" on the page. Only if you return to
    the very first 10 rows do you see a default selection in row number one of the results.
    How would I go about making the first row of each page the default selection?

    You'll need to code this into the RangeChangeEvent event of the table.
    http://www.oracle.com/technology/products/jdev/htdocs/partners/addins/exchange/jsf/doc/apidocs/oracle/adf/view/faces/component/core/data/CoreTable.html
    That said - I'm not sure this will be very helpful for the end user - after all in any case they'll need to first select a row before doing an operation on it.

  • Doubt about Select statement.

    Hi folks!!
                 I have a few doubts about the select statements, it may be a silly things but its useful for me.
    what is   difference between below statment.
    1)SELECT * FROM TABLE.
    2)SELECT SINGLE * FROM TABLE
    3)SELECT SINGLE FROM TABLE.
    Hope i will get answer,thanks in advance.
    Regards
    Richie..

    Hi,
    try this and if possible use sap help.i mean place the cursor on select and press F1.
                 Types of select statements:
    1.     select * from ztxlfa1 into table it.
                 This is simple select statement to fetch all the data of db table into internal table it.
       2.   select * from ztxlfa1 into table it where lifnr between 'V2' and 'V5'.
            Thisis using where condition between v2 and v5.
      4. select * from ztxlfa1 where land1 = 'DE'. "row goes into default table work Area
      5. select lifnr land1 from ztxlfa1
            into corresponding fields of it   "notice 'table' is omitted
             where land1 = 'DE'.
              append it.
               endselect.
         Now data will go into work area. and then u will add it to internal table by     
            append statement.
      6.   Table 13.2 contains a list of the various forms of select as it is used with internal tables and their relative efficiency. They are in descending order of most-to-least efficient.
    Table 13.2  Various Forms of SELECT when Filling an Internal Table
    Statement(s)                                   Writes To
    select into table it                                    Body
    select into corresponding fields of table it   Body
    select into it                                    Header line
    select into corresponding fields of it           Header line
    7. SELECT VBRK~VBELN
           VBRK~VKORG
           VBRK~FKDAT
           VBRK~NETWR
           VBRK~WAERK
           TVKOT~VTEXT
           T001~BUKRS
           T001~BUTXT
        INTO CORRESPONDING FIELDS OF TABLE IT_FINAL
        FROM VBRK
        INNER JOIN TVKOT ON VBRKVKORG = TVKOTVKORG
        INNER JOIN T001 ON VBRKBUKRS = T001BUKRS
        WHERE VBELN IN DOCNUM AND VBRK~FKSTO = ''
       AND VBRK~FKDAT in date.
    Select statement using inner joins for vbrk and t001 and tvkot table for this case based on the conditions
    8. SELECT T001W~NAME1 INTO  TABLE IT1_T001W
    FROM T001W INNER JOIN EKPO ON T001WWERKS = EKPOWERKS
    WHERE EKPO~EBELN = PURORD.
    here selecting a single field into table it1_t001winner join on ekpo.
    9. SELECT BUKRS LIFNR EBELN FROM EKKO INTO CORRESPONDING FIELDS OF IT_EKKO WHERE     EBELN IN P_O_NO.
    ENDSELECT.
    SELECT BUTXT   FROM T001 INTO  IT_T001 FOR ALL ENTRIES IN IT_EKKO WHERE BUKRS = IT_EKKO-BUKRS.
    ENDSELECT.
    APPEND IT_T001.
    here I am using for all entries statement with select statement. Both joins and for all entries used to fetch the data on condition but for all entries is the best one.
    10. SELECT AVBELN BVTEXT AFKDAT CBUTXT ANETWR AWAERK INTO TABLE ITAB
                 FROM  VBRK AS A
                 INNER JOIN TVKOT AS B ON
                 AVKORG EQ BVKORG
                 INNER JOIN T001 AS C ON
                 ABUKRS EQ CBUKRS
                 WHERE  AVBELN IN BDOCU AND AFKSTO EQ ' ' AND B~SPRAS EQ
                 SY-LANGU
                 AND AFKDAT IN BDATE AND AVBELN EQ ANY ( SELECT VBELN FROM
                VBRP WHERE VBRP~MATNR EQ ITEMS ).
        Here we are using sub query in inner join specified in brackets.
    Thanks,
    chandu.

  • Doubt about Bulk Collect with LIMIT

    Hi
    I have a Doubt about Bulk collect , When is done Commit
    I Get a example in PSOUG
    http://psoug.org/reference/array_processing.html
    CREATE TABLE servers2 AS
    SELECT *
    FROM servers
    WHERE 1=2;
    DECLARE
    CURSOR s_cur IS
    SELECT *
    FROM servers;
    TYPE fetch_array IS TABLE OF s_cur%ROWTYPE;
    s_array fetch_array;
    BEGIN
      OPEN s_cur;
      LOOP
        FETCH s_cur BULK COLLECT INTO s_array LIMIT 1000;
        FORALL i IN 1..s_array.COUNT
        INSERT INTO servers2 VALUES s_array(i);
        EXIT WHEN s_cur%NOTFOUND;
      END LOOP;
      CLOSE s_cur;
      COMMIT;
    END;If my table Servers have 3 000 000 records , when is done commit ? when insert all records ?
    could crash redo log ?
    using 9.2.08

    muttleychess wrote:
    If my table Servers have 3 000 000 records , when is done commit ? Commit point has nothing to do with how many rows you process. It is purely business driven. Your code implements some business transaction, right? So if you commit before whole trancaction (from business standpoint) is complete other sessions will already see changes that are (from business standpoint) incomplete. Also, what if rest of trancaction (from business standpoint) fails?
    SY.

  • Conditional formating in result table

    i am working on Endeca 3.1 version
    How to do conditional formating in  result table for string metric?
    is there any way available to achieve this?

    I have a different status value . Like Cancel,work in progress, Revision etc...
    Have to highlight the each status in different colors.
    is there any way available?

  • Doubts about BP number in SRM and SUS

    Hello everyone,
    I have some doubts about the BP number, especially for Vendors.
    I am working with the implementation of SRM 5.0 with SUS in an extended classic scenario. We will use one server for SRM and other for SUS. We will use the self registration for vendor (in SUS). My questions are:
    - Can I have the same BP number in SRM and SUS?? Or is it going to be different??
    - When a vendor accesses at the site to make a self registration in SUS, the information is sent to SRM as prospect (by XI) and there the prospect is changed as vendor? After that, is it necessary to send something from SRM to SUS again? (to change the prospect to vendor)
    - When is it necessary to replicate vendors from SRM to SUS??
    Thanks
    Ivá

    Dear Ivan,
    Here is answer to all your questions. Follow these steps for ROS configuration:
    Pls note:
    1. No need to have seperate clients for ROS and SUS. Create two clients for EBP and (SUS+ROS).
    2. No need of XI to transfer new registered vendor from ROS to EBP
    Steps to configure scenario:
    1. Make entries in SPRO --> "Define backend system" on both clients.
        You will ahev specify logical systems of both the clients (ROS as well as EBP)
    2. Create RFCs on both clients to communicate with each other
    3. In ROS client create Service User for supplier registration service with roles:
        SAP_EC_BBP_CREATEUSER
        SAP_EC_BBP_CREATEVENDOR
        Grant u201CS_A.SCONu201D profile to the user.
    4. Maintain service user in u201CLogon Datau201D tab of service : ros_self_reg in ROS client
    5. Create Purchasing and vendor Organizational Structure in EBP client and maintain necessary
        attributes. create vendor org structure in ROS client
    6. Create your ROS registration questionnaires and assign to product categories- in ROS client
    7. To transfer suppliers from registration system to EBP/Bidding system, Supplier pre-screening has to be
        defined as supplier directory in SRM server - EBP client.
        Maintain your prescreen catalog in IMG --> Supplier Relationship Management u2192 SRM Server u2192
        Master Data u2192 Define External Web Services (Catalogs, Vendor Lists etc.) 
    8. Maintain this catalog Id in purchasing org structure under attribure "CAT" - in EBP client
    9. Modify purchaser role in EBP client:
        Open node for u201CROS_PRESCREENu201D and maintain parameter "sap-client" and ROS client number
    10.Maintain organizational data in make settings for business partner
    Supplier Relationship Management -> Supplier Self-Services -> Master Data -> Make Settings for the Business Partners. This information is actually getting getting stored in table BBP_MARKETP_INFO.
    11. Using manage Business partner node with purchasers login (BBPMAININT), newly registsred vendors are pulled from Pre-screen catalog and BP is created in EBP client. If you you have SUS scenario, ensure to maintain "portal vendor" role here.
    I hope this clarifies all your doubts.
    Pls reward points for helpful answers
    Regards,
    Prashant

  • Doubt about uses of OBIEE

    I have some doubts about the possible uses of OBIEE. It happens that using OBIEE sometimes users demand report of an "analytical" type, that is aggregated analysis through OBIEE’s Answers, selecting data from dimension tables and measures from fact tables. That’s the ordinary purpose of business intelligence tools!!!
    Some other times though, users demand to perform through Answers analyses of an "operating" type, that is simple extractions of some fields belonging to dimension tables, linked between each other through joins, (hence without querying fact tables): that happens because some of the tables brought in the datawarehouse are not directly linked to any fact table. In this way users want to use Answers to visualize data even for this kind of extractions (or operating reports).
    Is this a correct use of the tool or is it just a “twisted” way of using it, always leading eventually to incorrect extractions? If that’s the case, is it possible to use instead BI Publisher, extracting the dataset through the "Sql Query" mode in a visual manner? The problem of the latter solution, in my case, relies in the fact that users are not enough skilled from the technical point of view: they would prefer to use Answers for every extraction, belonging both to the first type (aggregations) and the second one (extractions), that I just described. Can you suggest a methodology to clarify this situation?

    Hi,
    I understand your point... But I think OBIEE doesn't allow having dimension "on their own", they must be joined to a fact table somehow. This way, when you do a query in answers using fields of two dimension tables a fact table should be always involved. When dimensions are conformed, several fact tables may be used, and OBIEE uses the "best" one in terms of performance. However, there are some tricks that you can do to make sure a particular fact table is used, like using the "implicit fact column" in the presentation layer.
    So back to your point, using OBIEE for "operational" reporting as you call it is a valid option in my experience, but you have to make sure that the underlaying star schema supports the logic that your end users expect when they use just dimension fields.
    Regards,

  • Doubt about Tunning View Objects

    Hi !. I have the following doubt about tunning View Objects:
    If I have the following configuration on a VO:
    All Rows
    In Batches Of: 11
    As Needed
    Access Mode: Scrollable
    Range Size: 10
    Total Records On The Table: More than 100
    What would happen is that while the initial render, the view cache is fetch with 11 rows from the table and the ui table shows 10. In subsequent scroll events, more queries again will be done but not when the user scrolls back. My doubt is this one: Why, while the initial render If I put a breakpoint in this overrided method executeQueryForCollection, the execution reachs there but in subsequent scroll events (forward) the execution doesn't reach there ?. I understand thast this should happen as the required rows are not yet in the cache. I would like to know a way to test this access mode and what method is executed in every roundtrip to the DB. Thankx !.

    I don't think ADF needs to execute the query again - it just needs to fetch the next set of records.
    So if the cursor is already open, no need to issue another query.
    You can use the HTTP Analyzer to watch network traffic
    Monitoring ADF Pages Round-Trips with the HTTP Analyzer
    And you can use the logging features of ADF to see the queries being executed.
    Declarative View Objects (VOs) for better ADF performance

Maybe you are looking for