Doubts in Implementation project
Hi,
can somebody guide me for the following terms in implementation porject?
1. Function specification 2. Business blueprint 3. Functional design document
4.Technical design documnet 5. FD & Td's
can u explain me what is the sequence of documents in Imp project?.
Thanks in advance
VSM
Hi Subbu,
Functional Specification
Detailed information about our Report requirements,Sources Of data,Detail explanation from the key user of that particular area, About tables and fields .....This JOB is gennerally done by FUNCTIONAL people
Business Blueprint
Information Requirements Analysis
Multidimensional Data Modeling
Templates Business Blueprint
Sizing, Hardware Sizing
review BW System Lanscape & Transport
Authorizations
Functional design document
data flow about...Fuctionality
Technical Specification
Using FUNCTIONAL SPECIFICATION we r going to prepare an Design document of what are the objects you are going to use in the system and what type of Data Sources your are using and Targets etc.. This is nothing but an Technical Specification... and this also contains what type of the load is it...
For ASAP Methodology see the following link :
ASAP
Scenario bases doc:
http://help.sap.com/bp_biv335/BI_EN/documentation/SolutionScope_EN.doc
check in the following thread
SAP BI/BW Technical Documents
http://help.sap.com/bp_biv335/BI_EN/html/Business_Blueprint.htm
Hope it clarifies......U
Regards
chandra sekhar
Similar Messages
-
What are the roles in CRM implementation Project(all generic extractions)
Hi Gurus,
Now I am placed from a support project from BW (CRM) implementation project(all are generic extractions).
& I am also new to implementation project.
what are the neccessary steps to be taken when we are implementing BW for CRM.
Gurus please clarify my doubts.
1. what are the steps in implementation project in detail(as a developer).
2. what are the sizes of the cubes,ODS & How to decide them.
3. what are the neccessary steps for Master data & Transaction data.
4.How to make the functional specifications for Infoobjects,cubes,ODS,Remote cubes,Multiproviders.
5.can we change to delta loads to full loads if yes what happens to existing data.
6.How flat file extraction used in the case of crm& how to do ascii format.
7.What are the steps to be taken when we are creating Queries & Reports in BW CRM.
It's very urgent.
thanks = points.
Bwcheta.1. what are the steps in implementation project in detail(as a developer).
U have to basically to the techinal design after understnading the functional designs and implemnet the same( creating infoobjects, datatargets, datasources, queries etc.). Then u have to load data and do the unit testing on the same.
2. what are the sizes of the cubes,ODS & How to decide them.
Completely the business reqmnet and the data that the client wants to load.
3. what are the neccessary steps for Master data & Transaction data.
U have to understand ur master data and transaction data on the basis of whch u have create ur infoobjects and load data in them and finally in the datatarget.
4. can we change to delta loads to full loads if yes what happens to existing data.
Sure u can do that by choosing Full update in the infopkg. It will just load the complete data instead of changed records.
*Hope it helps. -
Role of a Functional Consultant in ESS/MSS in a implementation project
Dear Guru's,
Please help me understand what is the role of a Functional Consultant in ESS/MSS in a implementation project. would be great if any documentation is available. i have building blocks and other stuff which i got from this network, but iam confused looking at them, most of them talk about technical stuff. please give me a functional insight of a Functional Consultant in ESS/MSS.
Thanks,
vinayhi
the link above mentions the in general role of a functional consultant. But for Ess/Mss , First understand that the technical aspects are there as it would be for any other HCM module . Functional aspect comes into picture to show the functionality to the end user and also to modify the same as per business needs. Sap has given certain functionality which is common in case of few countries and common to the HR world in general. As a functional consultant your role would be to demonstrate and configure the needed functionality to the business.
A very simple example would be , talking about the who's who functionality. The output you see can be altered according to business needs by means of authoirization or customizing the columns which appear on the ouptut (e.g Change the columns as per business needs)
Hope this simple words make your doubt clear.
Regards
sameer -
How do SolMan identify development for which implementation project
Hello SolMan Experts,
I have the option to create many Implementation project for the same landscape and more than one Development(Implementation) Change Requests. My doubt here is how SolMan identifies for which implementation project, the Change request development should be created?
Please advise
Thanks
FarzanHi Farzan,
I am not deep into ChaRM; does it not work on the premise of 'IMG Projects' in the respective satellite systems ?
If so, your two implementation proejcts will in turn, lead to two IMG projects in those satellite systems and thus, ChaRM can keep a track as to which CTS falls under which IMG Project.
Please let me know if this is the case. I'll get back if I have a more definitive answer.
Regards,
Srini -
Change Request Management in Implementation projects or not?
Hello guys,
We are starting a Change Request Management project at a customer. We discuss in the blueprint phase whether we should be using it only for maintenance activities, and not for implementation projects. We have some people that can be working both in maintenance and also in projects at the same time.
We want to understand whether that scenario is possible and also whether is advisable. We want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
What are the drawback, difficulties, considerations you may consider in making that decision? Is it logic to work that way or is it better just to implement it for the whole installation, including implementation projects?
Esteban Hartzstein
Edited by: Esteban Hartzstein on Jan 20, 2010 3:37 PM
Edited by: Esteban Hartzstein on Jan 20, 2010 3:39 PMWe want to have control over the process, and therefore we should be restricting the creation of Transport Orders through SE01 so that we know that transport requests are created only by change document action.
this you can do either via SE03 / Display/Change Request Attributes / SAP_TMWFLOW Request created using Change Manager X X / Defaul for all client = Mandatory
or
you can achieve this by just activating the CHaRM in SolMan ( solar_project_admin / system landscape / CHARM)
Nesimi -
What are the Things required for BI 7.0 Implementation project
Hi Friends,
Can any one suggest me
1.What are the Things required for BI 7.0 Implementation project?
2.System Configurations & Hardware Components?
3. Any additional steps...
plz suggest me.
RegardsHi lakshmi,
http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
https://wiki.sdn.sap.com/wiki/x/JYk
Check the following links.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
check the following
http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
business content
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
https://websmp203.sap-ag.de/co
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm -
Errors while configuring Implementation Project
Hello!
I have installed BI APPS 11.1.1.7 on AIX 6.1 64x (also I have done it On CentOS Linux 64).
I have installed latest BI EE Bundle Patch and Latest weblogic Patch (10.3.6.0.6)
I am facing problems while configuring implementation projects in Functional Setup Manager when I open implementation project itself or any element in it:
An application error occurred. See the incident log for more information.
An application error has occurred. Your help desk can use the following information to obtain a more detailed description of this incident: 4, Server Domain: bifoundation_domain, Server Instance: bi_server1, Application Name: FunctionalSetupAppLite
I can see this errors in server log:
java.sql.SQLException: invalid name pattern: CENTOS_BIACOMP.FND_TABLE_OF_VARCHAR2_255
and
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1491)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
<Nov 4, 2013 11:33:11 AM EET> <Emergency> <oracle.dfw.incident> <BEA-000000> <incident 4 created with problem key "DFW-99998 [oracle.jbo.NoDefException][oracle.jbo.mom.DefinitionManager.findDefinitionObject][FunctionalSetupAppLite]">
<Nov 4, 2013 11:33:14 AM EET> <Warning> <oracle.adf.controller.faces.lifecycle.Utils> <BEA-000000> <ADF: Adding the following JSF error message: <html>An application error occurred. See the incident log for more
information.<br><br>An application error has occurred. Your help desk can use the
following information to obtain a more detailed description of
this incident: 4, Server Domain: bifoundation_domain,
Server Instance: bi_server1, Application Name: FunctionalSetupAppLite.</html>
oracle.jbo.JboException: <html>An application error occurred. See the incident log for more
information.<br><br>An application error has occurred. Your help desk can use the
following information to obtain a more detailed description of
this incident: 4, Server Domain: bifoundation_domain,
Server Instance: bi_server1, Application Name: FunctionalSetupAppLite.</html>
I founded this
We saw this error in log, this is not hampering anything, but any suggestion for this.
post and added this option to JAVA arguments of every weblogic server (Admin, bi and odi)
-Doracle.jdbc.createDescriptorUseCurrentSchemaForSchemaName=true
After that I have restarted bi_server1 and I am still havinf this error.
Is there any way to fix it?
Ths.Hi, Fesenko.
I have the same problem and FSM Task List is not showing all tasks available to Functional Developers (like Common Tasks Folder).
Any suggestion?
Fernando dRG. -
How to represent and document BI, SBOJ in an implementation project
Hello
We are working in an implementation project modeling all the scenarios, proceses and process steps. We want to represent as well all the BI, SBOJ and BPC information. We are thinking of creating specific scenario for those. We would like to get inputs about best practices regarding representation of BI and so on in Solution Manager, how to prepare the blueprint, what type of "functional" documentation, technical one, etc.. Then, how to manage the different objects in SOLAR02, what is available in config tab, development tab, only documents or we can have access from SOLAR02 to the different objects, and then navigate? I would like to have your view on this subject.
Regards
Esteban HartzsteinYou might get better help asking on [email protected]
-
Charm in implementation project
Hi All,
Iam currently configuring charm in implementation project. We do not have QA and PRD systems build yet.
I have created transport routes DEV>VQA>VPR ie with QA and PRD as virtual systems.
Now how do I add this as virtual systems in logical component. If I create entry in SMSY manually, tomorrow when my QA and PRD systems are available, how do I change it?
Regards,
SHi,
For demo system you can create three additional clients say 100>dev, 100> QA, 300> PRD and 500> solution manager ( that will be your original client).
you can create logical component for the same in SMSY and also you need to set up the transport route accordingly.
you can test the entire charm functionality this way.
When you would be having your actual systems you can create another logical component and project for the real scenario in solution manager and adjust the transport routes and you can still keep the demo system active alongwith real system scenario in case you want that.
Regards,
Sarita -
Not able to see General Documentation in Implementation Project
Hi All,
I've created one Template Project and one Implementation Project. Now I've added some documents to Template Project - General Documentation Tab. Ideally this newly added documents should be appeared in Implementation Project - General Tab. But in my case I am not able to see this newly added documents. Is there any reason behind this? What should I do to make them visible in Implementation Proj - General Documentation tab?
Another question is, If a document from Project Documentation tab is deleted by pressing 'Delete Row' button (not actual 'Delete' button), how can I retrieve that document? How can I see the list of all deleted documents?
Thanks in advance!
Shaun
Edited by: shaun99 on Feb 16, 2012 4:28 PMHi Shaun,
For the implementation project, please read the session "USING THE TEMPLATES" in the wiki page for template projects, where it explains how to update your project with the changes made in the template project.
-http://wiki.sdn.sap.com/wiki/x/gRkMDg
regarding the download, I'm not aware of any easy way to do mass download of the documents. Maybe in SI80 you could do such thing but I believe you would only be able to filter by the folder where the documents are phisically stored and as you're using a template project, all the documents are stored in the folder SOLAR00, shared along with solutions and etc..
more info about this in the wiki page for documents in solar01 and solar02:
-http://wiki.sdn.sap.com/wiki/x/rBoMDg
Kind regards, Fabricius -
How to transport Implementation project template changes?
Hello All,
I have made changes to the project template (added doc types, assigned status schemas) for Implementation projects in my dev system by going to SOLAR_PROJECT_ADMIN > Goto > Project Template > Implementation projects. I want these values to be the standard values whenever I start a new Implementation project.
When I save my changes, I am not prompted for a transport request, nor can I find any transport option in the menu. Do these project templates need to be manually configured in my test and production systems, or is there another way of assigning the changes to a transport that I cannot figure out?
Thanks in advance,
MicheleHi,
Just enable the GLOBAL field for the values which you want to be available for all the implementation projects.
e.g
You created a documentation type which is having global field tick so it will be available for all
Hope it helps
Regards
Prakhar -
How to connect Template project and Implementation project
Hi Experts,
I would like to know how to connect Template project and Implementation project
in Solution maneger. Please help.
Best regards,
GaitoHey Gaito,
great. Now that you have a template project, you need to create one or more templates within the project template.
Go to tab Templates (of your Templ Proj) and activate 'Global Rollout Functionnality' to be able to use the templates.
Create a new template thanks to button create. Visibility will be set to red 'private'. You ll have to set it to visible so it becomes visible from your implementation project.
You ll see when trying to do that next message 'No scenarios/configuration structures assigned to the template XXXX'. That means that in SOLAR01 you did not define a scenario that ll be used in template you re trying to create
In order to do that go to SOLAR01 for template project, select/create scenarios in tab structure and set in column template value of your template (the one you re creating in SOLAR_PROJECT_ADMIN) and in Global Attribute set value t Global
You l definitely find more info on this in sap document SMI310 (course). I don t know if you can find it on internet
Hope this helps
Regards
Khalil -
Copy teammembers and keywords from template to implementation project
Hello All,
When adding structure elements (business scenarios, etc) from a template project to an implementation project, the data on the administration tab is not copied with it.
When selecting a specific scenario from the template we need to be able to also copy the keywords and team members to the implementation project.
1) Is this possible without custom development
2) If we use custom development. How can I link a structure element to its Administration tab data (keywords and team members) in ABAP?
Thanks
JurjenIf you copy the entire project using SOLAR_PROJECT_ADMIN, and then delete out of scope scenarios using SOLAR01, then the administration data can be copied over. Note, however, that this only works for the initial project copy. Subsequent changes to the information on the Administration tab in the Repository cannot be carried over to the projects using SA_PROJECT_UPGRADE. Another restriction is that you can't copy a template project to an implementation project. Also, if you want to use further template functions such as the Global Attributes, then you have to bring scenarios in using the template functions, where this data is not copied over.
-
How to Get in to Implementation Project
Hi all,
Iam R.Chaitanya, working in Capgemini support and one rollout project for the last 3.5 yrs. In view of saturation (from various points like financial growth, skills growth, insecure future... ), iam looking for change in project. As per my assumption, if i can get in to an implementation project then it will be good enough to continue further. Iam strong in MM configuration, but on simply applying to Jobs, iam not getting reply as i dont have implementation experience earlier.
Can any one please let me know the way to get in to Implementation project. Any kind of help
1) How to design the resume
2) Showing Implementing oppurtunities
3) Skills to be developed.
Please advise accordingly.
thanks & regards
Chaitanya RayaproluHi,
Till now i have not taken part in any implementatio project and i donot feel any diificulties. As far as i know support is much more diffcult than implementation and you can learn more in support projects.
iam not getting reply as i dont have implementation experience earlier.
This is not because of this reason . Nowadays all the requirement has this credential ( Implementation experience) . Dont give much importance to this . Try searching , finally calls will come . Having 3.5 years od experience you should be able analyze and do this yourself
keshav -
CTS Mgmt in SolMan for an Implementation Project?
Hi,
In an Implementation Project, if we need to use Solution Manager for CTS, is there any pre-requisites?
To be more clear, the project is still in the development stage and has not gone-live. The SolMan project type will be "Implementation" project(not a maintenance project). In this scenario, how the development/customization request will be moved across the landscape?
What are the steps to be followed?
Any inputs in this regard will be greatly appreciated.
Thanks a lot in advance.
best regds,
Alagammai.Hi Avinash,
Again thanks a lot for your timely help.
So, all transports relating to an implementation project can be moved using the CHARM feature of SolMan. Nice )
(ii) Whenever I create Implementation or Maintenace project in my SolMan system, I am not finding this "Change Request" tab under "System Landscape" tab. What could be the problem? Is that becos CHARM is not configured in my system?
(iii) As you told while we create the transport route in the satellite systems, do we do it in the regular way? Or is there any modifications need to be done as we have to use it with CHARM? (sorry, might seem to be a silly question... but, as I am not aware of it...)
(iv) Also, you have listed a number of steps to be done. Are these steps to be done in the SolMan system?
(v) Is there any link or document describing this process? Do you have any document of your own? If so, can you pls send the same to my email id [email protected]?
Thanks & Best regds,
Alagammai.
Maybe you are looking for
-
How do I get my iMac AirPort to only lock onto my wirless router and not others?
Everytime I power up my iMac I have to use the AirPort drop down menu to select my Wi-Fi network from a long list. Is there a way to set my Air Port Preferences so that it always only picks up my Wi-Fi signal automatically? Saving me the time form al
-
How to Modify the Selection Screen in Report Painter
Hi All, I am working on Report painter and writer, can any body helpme how to change the selection screen i.e i want add some more select options to the exisiting roport . how can i add more select options to the exisiting one please let me know th
-
I cant recieve messages via bluetooth on my nokia ...
hi hopefully you can help me i can sent but cannot recieve messages via bluetooth on my nokia 6230i ive had the phone about 2 months ,ive phoned the phone company i got the phone from and they said they dont deal with bluetooth its a free from the ph
-
I have a huge amount of duplicate photos in my libraries which are stored on an external hard drive(MyBook). For some reason every verticle photo has at least one duplicate. Is there a fast way to delete all duplicates or does this have to be done ma
-
I did not know where to send a suggestions, so am posting it here. Please redirect this to the appropriate place. When I shut down windows and firefox is running with multiple tabs, it pops up a dialog box and prevents windows from shutting down. Las