Doubts intalling Oracle 10G in Solaris 10.

Hi Buddies;
I'm installing Oracle 10g, in Solaris 10, first I uncompressed this file 10gr2_db_sol.cpio. Now, when I execute runInstaller I got this message:
Checking operating system version: must be 5.8, 5.9 or 5.10. Actual 5.10 Passed
Checking Temp space: must be greater than 250 MB. Actual 13289 MB Passed
Checking swap space: must be greater than 500 MB. Actual 13492 MB Passed
Checking monitor: must be configured to display at least 256 colors
>>> Could not execute auto check for display colors using command /usr/openwin/bin/xdpyinfo. Ch eck if the DISPLAY variable is set. Failed <<<<
Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,at which time they will be rechecked.
What I supposed to do? Thanks for your help.
Al

Hi,
look at:
Re: Problem in adding database
maybe it helps. It that thread I showed how I usually manage X11 window. Another way is to do everything silent with scripts as shown here:
http://www.oratoolkit.ch/knowledge/howto/installation/eeSrv-10g-R2-on-Solaris-10-sparc.php
That's my open source swiss army knife.
Cheers,
David
OCP 9i / 10g / 11g

Similar Messages

Error while installing Oracle 10g on Solaris 10.

Hi all,
I am trying to install Oracle 10g on Solaris 10 (x86). I did every thing that is given in the Installation manual
created user,group and directories. set all the env variables.
executing the runinstaller it throws error
error in writing to directory /tmp/OraInstall2009-04-06_07-14-09PM.please ensure that this directory is writable and has atleast 69MB of disk space.Installation Cannot continue.+
*:Error 0*
I have given recursive a+rwx permission to /tmp folder and /tmp has 3.2 GB free space. am i missing some thing??
I am very new to Solaris and Oracle;Please help me with this.
Thanks.
Regards
Akhilesh Bhale

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Error in Insallation of Oracle 10g in Solaris 5.9

Hi,
I am Installing oracle 10g in solaris OS.After completed the pre installation steps.I run the ./runInstaller command.But its showing error like this
bash-2.05# ./runInstaller
/export/home3/oracle10/install/.oui: syntax error at line 1: `(' unexpected
I open the Script file also ...
bash-2.05# cat runInstaller
#!/usr/bin/sh
# The environment variable $SRCHOME cannot be set during the installation
unset SRCHOME
AWK=/bin/awk
BUNDLE=db
OCR_LOC=/var/opt/oracle/ocr.loc
LOCALONLY=local_only
LOCAL=TRUE
CMDDIR=`dirname $0`
if [ "$CMDDIR" = "." ]; then
CMDDIR=`pwd`;
fi
# Replace relative path with fully qualified path.
if [ ! "`echo $CMDDIR|grep '^/'`" ]; then
CMDDIR=`pwd`/$CMDDIR;
fi
if [ x${PATH} != x ]; then
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin:$PATH
export PATH
else
PATH=$CMDDIR/install:/usr/bin:/usr/ccs/bin
export PATH
fi
if [ x${LD_LIBRARY_PATH} != x ]; then
LD_LIBRARY_PATH=/usr/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=/usr/lib
export LD_LIBRARY_PATH
fi
# Determine whether there is an existing CRS or not.
# Local is value of local_only in ocr.loc.
# False means there is an existing CRS installation on the system.
if [ -r $OCR_LOC ]; then
LOCAL=`$AWK -F= /$LOCALONLY/'{print $2}' $OCR_LOC`
fi
case "$BUNDLE" in
db)
# One-click: only if there is no cmd line argument and it's not on CRS node
if [ $# -gt 0 -o "$LOCAL" = "FALSE" -o \
! -r $CMDDIR/install/oneclick.properties ]; then
$CMDDIR/install/.oui $*
else
$CMDDIR/install/.oui -oneclick
fi
crs)
$CMDDIR/install/.oui $* -formCluster
$CMDDIR/install/.oui $*
esac
Please tell me the solution asap.

bash-2.05# ./runInstallerDon't install as root user.
Did you install all important packages (listed in installation prerequisities)?

Installation of Oracle 10g in Solaris 10 zones

Hi Everybody,
Is there any Documentation for Installation of Oracle 10g in Solaris 10 Zones.
I am having multiple zones shared by one common SAN Storage.
I want to install oracle 10g in one of the particular local zone.
Regards,
Prosenjit Mukherjee.

Last time I looked at metalink the documentation said zones and containers were not supported. That may no longer be true so you should check there first.

Complexities of Migrating Oracle 10g from Solaris to HP-UX Itanium

Can anyone share their experiences with regards to migrating Oracle 10g from Solaris on a Sun platform to HP-UX 11i v3 (Itanium) on HP Integrity servers. We are trying to consider all the risks associated with such a move. How much time delay did you experience in resolving unexpected issues along the way? How complex is the process? If you had to do it all over again, would you?
In addtion, we will also be migrating Oracle eBusiness Suite 11i (11.5.10.2).
We appreciate your helpful feedback.
Thank you.

Here is more information:
- the database size is currently about 500GB
- our ASP allows us to be down as much as we want however the company's own needs can only allow a downtime window of two days (over the weekend)
- i presume further that RMAN might be an option to use to backup the database and instance to some transportable media
- it would take about four days to get that media from the ASP to our facility so durign that time the instance at the ASP would have to be used
- after we get the backup media and load everything into our in-house site, our last step would be to find a way to migrate all changes over the WAN. I am told that unless the platforms are the same on both ends, mirroring will be extremely difficult or impossible. If we have a platform that is different from the ASP platform, then the migration of all changes will require conversion and other mechanisms. I am told that HP-UX has so much complexities that this will be a daunting task to accomplish.
Do you have any opinions and recommnedations?

LRM -00109:could not open parameter file Oracle 10g in Solaris 10

Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Thanks

4joey1 wrote:
Hallo! I have just installed Oracle 10g in Solaris 10.When I logged into sqlplus / as sysdba if found that I was connected to an idle instance. When I tried to startup open the db, the following error appeared
Connected to an idle instance.
SQL> startup open;
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/export/home/oracle/product/10.2.0/db_1/dbs/initsolaris.ora'
My pfile has the name init.ora and not initsolaris.ora.How can I change the settings to make the Oracle database start via pfile init.ora.
By default, oracle will look first for a spfile named "spfile<ORACLE_SID>.ora". Lacking that, it will try to find "init<ORACLE_SID>).ora.
Eventually,I would like the db to read the spfile spfileorcl.ora during the startup.How can I achieve this?
Once you have started the db (I believe a startup nomount will be sufficient) you can issue CREATE SPFILE ... Details are in the fine SQL Reference manual found at tahiti.oracle.com
BTW, "open" is the default behavior of "startup", so no need to specify it. A simple "startup" does the same thing.
Thanks

[Beginner Oracle 10g on Solaris 10]Script Root.sh asking road

Hello,
Need help please, Iam near the end of my installation Oracle 10g on Solaris 10, Oracle installer ask me to execute Root.sh, he ask me a path, suggesting me this road /usr/local/bin
The message is Enter the full pathname of the local bin directory : usr/local/bin/ ?
my path is
$PATH=/usr/bin:/usr/dt/bin:/usr/openwin/bin/:usr/ucb
$ORACLE_HOME=/export/home/oracle/oraInventory.
This message follow after I executed orainstRoot.sh successfully.
Thx for any help.
Edited by: user583169 on Feb 24, 2009 1:41 PM

This script asks for path where oraenv, coraenv and dbhome scripts should be copied/created.
Default (suggested) path (full path to directory) is /usr/local/bin directory but you can specify your own directory.
So you have at least two options:
1. Use default location and put /usr/local/bin to your $PATH environment variable
2. You can specify your own path which exists (is set) in $PATH variable (for example /usr/bin)

Oracle 10g on solaris 10 : kernel parameter warning

I am installing oracle 10g on Solaris 10.
I have a warning on kernel parameter missing (shminfo_shmmax for example) during the system check.
I understood that with the 10 version of solaris these parameters are replaced by ressources control and I have checked them. They are correctly setted.
Need I do something before continue the install to release the warning or can I bypass this issue and continue the install as I have no warning ?
Thanks for your answers.
Sorry for my english.

You are right. Since Solaris 10 kernel parameters settings in /etc/system is obsolete and some parameters are deprecated.
The steps how to configure required parameters you can find in my paper (step #1.): http://ivan.kartik.sk/oracle/install_ora10gR2_solaris.html
I bypass this issue and continue the install as I have no warning You can safely bypass this issue during installation process but you should set these parameters after installation.

How to install Oracle 10g on Solaris 10 non-global zone.

Hi,
I want to install Oracle 10g on Solaris non global zone with ASM.
I need complete doc for doing the same.
REgards
S.Ali

Check Oracle® Database Installation Guide 10g Release 2 (10.2) for Solaris Operating System.

Question on migrating oracle 10g from solaries to linux?

Can some one tell the exactly what is the advantage of migrating oracle 10g from solaries to linux?
Thank you,
hb

call me
[email protected]

Oracle 10g on Solaris 5.10 x86

Hi,
I just tried installing oracle 10g(10.2.0.1) on my new machine(Sun solaris 10 x86) Intel 915 GAG with 512 RAM and 120GB SATA drive.
After I started running ./runInstaller the following message came on console......
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6 , 5.7 ,5.8 or 5.9. Actual 5.10
Failed <<
I think , if Oracle 10g is not yet certified to run on solaris 10x86.
Please help me to proceed.
Regards
Deepak

you have to try this:
start ./runInstaller with option -ignoreSysPrereqs;
you have also to choose: 'Do not create a starter database' by intallation;
I think this will help you.
wbr
hans

Install oracle 10g on solaris 9 platform without setting noexec_user_stack

Hi,
I'd like install oracle 10g software on solaris 2.9 platform without setting noexec_user_stack parameter to 1.
The problem is that i need install software before, for migrating product environment.
I can write /etc/system file but i can't reboot system until several days.
I will not start migration process until i reboot the system and parameter definitely set.
Do you know if we will can have any kind of problem???
Thanks in advance.

Thanks for your answer FZheng. But i will just install software. I will not start any oracle 10g process until i reboot the machine.
I think that oracle software installacion should not be affected. Do you know if this parameter affect to compile softwere during OUI wizard progress???.
Before going on migration process and start database i will sure that this parameter is correctly fixed.
PD.: I couldn't read metalink reference that you've suggested becouse my metalink account have problem access in this momment. During all day i've been reeding metalinks docs without any problem until this momment, bad luck.
In test environment i've installed oracle without this parameter and i've never had any problem. But this installation is more important than others becouse i ask you in this specialist forum.
Thanks again !!!

Memory issue, Oracle 10g in Solaris 10 zone

I know many memory questions have been asked, but I couldn't find any similar to the problem I'm seeing.
Starting from a fresh server boot, I have 12G of available memory, or nearly that anyway. Oracle 10g is installed with no databases created.
After creating a database and running a few sql scripts to create tablespaces and users, my available memory is down to 3.5G.
Rebooting the solaris zone containing Oracle does not restore any available memory. Shutting down the database does not restore any available memory.
Why does Oracle seem to absorb so much available memory and not release it? I created the database from scripts and restricted the overall sga by a good bit over the defaults and while this did reduce the memory the oracle processes use, I'm still seeing this continual absorption of memory to the point where running any imports takes forever because my memory seems to bottom out. I saw it go down (using top, and vmstat) to about 500M at one point.
Is there any utility that I can use, either solaris or sqlplus that will free up system memory?
Message was edited by:
tsmori

After creating a database and running a few sql scripts to create tablespaces and users, my available memory is down to 3.5G.
What are your settings fpr SGA_MAX_SIZE, SGA_TARGET and PGA_AGGREGATE_TARGET?
Shutting down the database does not restore any available memory.
Hmm that's really strange. We are running Oracle 9i on Solaris 10 Containers and didn't have any problems with memory leaks.
Dim

Can't install oracle 10g on solaris v10 X86!!!

Hi everybody, I got error messages below:
====================================================
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be 5.6, 5.7, 5.8 or 5.9. Actual 5.10
Failed <<<<
=====================================================
Does that mean there is not Oracle 10g for Solairs 10 X86?
Where can I find Oracle 9i for Solairs x86?
Thanks advance!

10g on Solaris 10 needs special handling:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Oracle 10g under solaris 10.

Hi people, i have installed a Oracle 10g under a solaris 10 zone.
The installation was completed sucefull.
but when i will try to startup the instance ...
[ @ORCL]: ./sqlplus "sys/secure as sysdba"
SQL*Plus: Release 10.2.0.1.0 - Production on Thu Sep 22 10:24:03 2005
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup nomount
ORA-32004: obsolete and/or deprecated parameter(s) specified
ORA-00600: internal error code, arguments: [keltnfy-ldmInit], [46], [1], [], [], [], [], []
SQL> Disconnected
I also have Oracle 10g installed an running, but under GLOBAL zone.
There is any kind of restrinction ?
Thanks !

No, i couldn�t do this procedure.
I installed the product using a custom response file.
I have those vars.
ORACLE_SID=ORCL
ORACLE_HOME=/oracle/10.2.0/
i already have a initORCL.ora
My file contains:
db_name=SOLARIS
db_files = 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 123232153 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (oradata/ora_control1, oradata/ora_control2)
The error that i posted in first post ocurrs when i try to startup the instance.
Until now, i never ever saw a detailed document with a how to install Oracle 10g UNDER zones.
In global zone, there are now problem :))
Please, help-me :)
Regards !

Doubts intalling Oracle 10G in Solaris 10.

Similar Messages

Maybe you are looking for