Doubts on clearing line items in profit centre and deleting the profit cent

hello All
We are using ecc 5.0 and new g/l, document splitting is activated. We are not using classic profit centre accounting.
We have two accounts which has values for profit centre 1010219.
1. 228100 which is assigned in cross company code clearing account
2. 228200 which is assigned in cross business unit ( as a part of zero balance account) in documen splitting.
now i want to clear all he entries for this profit centre and transfer them to another profit centre 1010403.
I am unable to do so as everytime I try to pass cross profit centre entry, Account 228200 gets a balacing line item( as a part of zero balance). this way my profit centre trail balance will never become zero.
can some body help me with this,,,,
1. in classic profi centre we could use t-code ke90 just to pass a document entry in PCA, this is not possible in new g/l... is there alternative.....
please help....
thanks
sanjeev

Hi,
You can try Profit Center Distribution(both sender and receiver gets original account numbers) or Assessment(Assessment cost element shall be a bring in between) to transfer values from multi profit centers to one single profit center or multi profit centers. The cycle can be run on a periodical basis.
Trust this answers to your query!

Similar Messages

How to Close a Purchase Order line Item for GRN W/O Deleting the Line Item

Hi,
I want to Close a line item for Goods Receipt in a Purchase Order. How Do I do this?
My Requirement is that the system should not allow for Goods Receipt for the Line Item.
I know of 2 options which are difficult to Implement.
1) I delete the Line item
2) Put the delivery Completed Indicator - For this the system still allows for GR
any Other way of Closing the line Item
NS

Hi, you can close the Line item by, doing partial GRPO, i.e if u use the Copy From option in GRPO, there comes a Draw docuemnt wizard, there you can choose one line item, and then put GRPO for that line item,
The Wizard comes only in the Copy From option,
Close the Line item, by right clicking on that Line item and then 'close Row'
Edited by: Gayathri Panneerselvam on Dec 19, 2008 10:25 AM

How to clear line items..

hello friends,
I am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

Hi Vamshi,
please check the following:
1. In transaction F.13 (automatic clearing), check box "Special G/L transactions" for vendors
2. In transaction OB74, check that the associated G/L account for the special G/L indicator is included in the ranges of accounts to be cleared.
I hope it helps. Best regards,
Alvaro

Enhancement on F.13 to clear line items automatically

hello friends,
i am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

hi Vamshi,
chekc if on the selection screen of F.13 the special G/L transactions are properly selected. Also check the customizing for automatic clearing (i. e. which fields have to match).
ec

Clear line item number

hi experts,
My requirement is to clear line item number(zeili) so that it can't be seen in the form output.
but after clearing zeili in print program , it is showing '000' in print o/p.
I don't want to show anything in print o/p of the form.
Plz tell me how to remove this '000' from the output.
Replies will be rewarded.
Thanks in advance.
SM

Hi,
Use &itab-fld(I)& which suppresses the initial value of the field. Chk out, it may work.
Regards,
Narendra.
Reward points if helpful!!

Activity elements planned values not showing in profit centres and cc.

Hi,
i'm currently working on a project involving Co and PS. I'm in charge of the CO module and i've got a problem with planned values on activity elements and in PS. Planned values are calculated on activty elements and so are actual and they show in real time in profit centres and cost centres but not their planned counterpart values. i've absolutely nothing on profit and cost centres reports. Integrated planning is activated in PS and so is project in versions.
i've asked the PS "Expert" and he said it comes from the "plan cost calculation" tab in cj20n, which obviously isn't the cause.
Doesn't it come from the project profile or status profile customizing? (opsa or ok02)?
Can the problem come from CO?
any help appreciated
regards
xavier

Hi Sreenivas,
thanks for your help and sorry for my late answer.
what is the difference between FAGL_CO_PLAN and transaction 1ke0.
when i log on transaction 1ke0, i can see all my planned values.
wouldn't the issue be resolved by launching t-code faglgcle "fi-gl activate update of plan line items" ?
regards
xavier

Profit Centre and Plant

Hi,
What is the link between Profit Centre and a Plant on SAP?
Where are they maintained?
Please advise,
Thanks,
Themba

Hi,
I need to know the link when you doing a normal cost center planning(CCA) because when I look at profit centre line item, it looks like it derives a plant as well.
Please advise,
Thanks,
Themba

Line item Ship-to Info is not the same in Header Ship-to Party During Sales Order Creation via IDOC

We have observed that during creation of sales order using idoc, the line item ship-to party is not the same with header ship-to. The ship-to party info in line item is equivalent to the header's sold to party. To give you a quick background, Sold to party info is given in idoc and ship to party is being determined using table EDPAR. In this specific scenario, sold to customer is not the same with ship to customer.
Initial checking on the code leads us in function module VIEW_KUAGV. This FM populates partner details of sales order header and line item in program LVEDAF1Z
Below is the code for Sales order Header. Notice that WE_INPUT parameter which contains Ship to party is passed as exporting parameter in FM VIEW_KUAGV. This is the reason why Ship to Party is populated correctly in sales order header but not in sales order item.
Initially, it first set to Sold-To Party. However, if WE_INPUT is given or provided, partner details is set to Ship-To Party.
Please advise on how we can make the ship to party info in header and line item be consistent. This is SAP Standard program which why we are hesitant to make change on the program. If there is a configuration to make this happen, kindly advise.
Regards,
Rommel

Hi Jayesh,
If I understand you correctly, you want that when creating SO from Quoatation
the Ship to Party also follow/copy Ship to Party from Quotation, right?
Just to confirm with you, when you creating SO reference from Quotation, you
use copy/follow-up function, am I right?
You can do this by setting in configuration of Copy Control (like mentioned by Hui).
Step as follow :
1. Go to IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions
2. Create your BAdi (Business Add-In for Copying Control), such as get Ship to
    Party value from source document and use it in current document
3. Use this Rule you have created in BAdi (no. 2), in copy control transaction type
    IMG->CRM->Transactions->Basic Settings->Copying Control for
    Business Transactions-> Define Copying Control for Transaction Types
4. Here you set Copying Routine for your transaction types (put name of your Badi
    created in step no. 2)
Or alternatively, you can set it on access sequence in Partner Function
Ship to Party in configuration. You can define access sequence the Ship
to Party is taken from Preceeding Document -> Ship To Party
1. Go to Partner Function access sequence :
    IMG->CRM->Basic Functions->Partner Processing->Define Access Sequence
2. Create new access sequence with following entry :
    - Source COM_PARTNER_A (PrecedingPartner)
    - Check Mapping for Partner Being search
    - Partner Function in Source = Ship To Party
3. Assign this Access Sequence in you Partner Function used in Sales Order Transaction
   Type.
Tell me if this is what you looking for
Gun.

How to delete the Cost center line item data

How to delete the cost center line item data of particular cost center and only one cost center is exisiting for that company code.
Is there any way to delete the line items in that cost center.
Can data archiving & deleting can help us..........
does it have any effect over other cost center data....
any input needed.........
regards
rajesh

Hi,
i found 2 reports for you:
1) CO_TOTAL_WRI - Archiving CO Totals Records
2) RKCOITW1 - Archiving CO Line Items: Write Program
from 2) is a linlk to customize archiv-parameters
-> start it with transaction se38 / sa38
A.

PO line item details from BAPI_PO_GETDETAIL1 and append to BAPI_PO_CHANGE

Hi,
The requirement is to get PO line item details from BAPI_PO_GETDETAIL1 and save it in the internal table and append that internal table into the BAPI_PO_CHANGE.
But i am getting dump in this program.
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE BAPIMEPOITEM. "Include the structure of Dictionary Reference.
data: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details like line of it_po_details.
data: it_po_details1 like standard table of po_details,
wa_po_details1 like line of it_po_details1.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '4500000016'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    PURCHASEORDER = p_ebeln
TABLES
    POITEM        = it_po_details.
loop at it_po_details into po_details.
read table it_po_details into wa_po_details with key PO_item = p_ebeln.
move-corresponding po_details to po_details1.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      PURCHASEORDER = p_ebeln
    TABLES
      POITEM        = it_po_details.
append po_details to it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-PO_item,
       wa_po_details1-MATERIAL,
       wa_po_details1-SHORT_TEXT,
       wa_po_details1-PLANT.
ENDLOOP.
endloop.

HI,
1st you check for the following following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
and to change the PO below is the eg for changing the short text:-
TABLES: ekpo.
DATA: BEGIN OF po_details.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details.
DATA: BEGIN OF po_details1.
        INCLUDE STRUCTURE bapimepoitem. "Include the structure of Dictionary Reference.
DATA: END OF po_details1.
DATA: it_po_details LIKE STANDARD TABLE OF po_details,
wa_po_details LIKE LINE OF it_po_details.
DATA: it_po_details1 LIKE STANDARD TABLE OF po_details,
wa_po_details1 LIKE LINE OF it_po_details1,
poheader LIKE bapimepoheader,
return LIKE STANDARD TABLE OF bapiret2 WITH HEADER LINE,
poitemx LIKE STANDARD TABLE OF bapimepoitemx WITH HEADER LINE.
PARAMETERS: p_ebeln LIKE ekpo-ebeln DEFAULT '5600010646'.
CALL FUNCTION 'BAPI_PO_GETDETAIL1'
EXPORTING
    purchaseorder = p_ebeln
IMPORTING
    poheader      = poheader
TABLES
    poitem        = it_po_details.
LOOP AT it_po_details INTO po_details.
READ TABLE it_po_details INTO wa_po_details INDEX 1.
MOVE-CORRESPONDING po_details TO po_details1.
MOVE: po_details-po_item TO poitemx-po_item,
        'X' TO poitemx-short_text.
APPEND poitemx.
CALL FUNCTION 'BAPI_PO_CHANGE'
    EXPORTING
      purchaseorder = p_ebeln
      poheader      = poheader
    TABLES
      return        = return[]
      poitem        = it_po_details[]
      poitemx     =
      poitemx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
APPEND po_details TO it_po_details1.
LOOP AT it_po_details1 INTO wa_po_details1.
    WRITE:/ wa_po_details1-po_item,
    wa_po_details1-material,
    wa_po_details1-short_text,
    wa_po_details1-plant.
ENDLOOP.
ENDLOOP.

No commitment line item in Purchase requestion after deletion .

Hi SAP FICO experts
Please provide solution for the issue .
User created a line item 20 in the purchase requestion with account assignment u2018Fu2019 (orders ) and deleted this Item 20, usually when deleted ,the line item will be there with deleted symbol, but the line item was not there in the PR
But commitment values for item 20 are shown in PR menu (Environment -> AC Commitment documents ) and in T.code KOB2 (Commitment line items for orders )and in report S_ALR_87013019 (budget/actual commitments)
So user was not able to process new PR with reference to their own budget.so i want to make the commitment value to zero .
one more thing our client has upgraded to ECC6.0 ,will it be the problem for this .

In most of the cases Problem with Commitments are expected for no valid reason. I suggest you to run Program RKANBU01 to fix incorrect commitment. If this is not solved check If you have program ZKAOIDE0 in your system. You can run this program to solve the issue.
You can check Note [152571|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=152571]

Sales Documents and Profit Centre and GL Accounts

Currently a when we create a sales document for a plant, that document is posting to a specific GL account (Cash on Hand account) and profit centre. In VKOA, the Account Assignment Group is assignment to a GL Account, and that AAG is assigned to the material master. I want to find out how SAP is currently determining to which profit centre and GL Account it is posting to. The only thing that I can get is the Plant and sales office in the Sales document. I want to know the determination factor

I want to know the determination factor
Have you checked in OKB9 ??
thanks
G. Lakshmipathi

Merge several PR line into into 1 PO line item with ME57-Assign and process

Our process is run MRP to generate Purchase requisition, system generate 1 PR number for each materials. Happening that there are multiple PR for a same material number and same delivery date. When we convert PR to PO using tcode Me57 - Assign and Process PR, system always generate different line item for each PR even the materials and the requirement date is the same.
How to merge 2 or a few PR line items for a same material and same requirement date into 1 purchase order line item?

Hi,
You should use the "shopping cart'' in the "Delivery Schedule" Tab page of the PO to achieve your requirement. Basically, in this case, you should use ME21N transaction with ''Document Overview" feature to select related PR line items and drag them into this shopping cart.
Cheers,
HT

Line item problem in FBL3n and FS10n

Dear ALL FI expert
In my one G/L account(WIP) I do not see any line item data using FBL3n, FS10n.
But the transaction is made in period jan ~ march/2009.
Can anybody tell me why the problem happend?
Note: Actually I can see last year data and it is okay.
Thanks & B.Rgds
Bishnu
23/04
Edited by: Bishnu Dey on Apr 23, 2009 11:08 AM

Hi Bishnu,
For the said GL, check in FS04, whether the line item mgmt tick was changed?
If changed do the following:
Activation of Line item management
For the same a GL had been created with no tick in 'Line item display'. Documents were posted.
Now the line item Display is to activated in the above GL.
For the same for the following process:
a)Tick the line item display in the GL master and save
b)The GL has to blocked for posting
In FS00, Click on the block button and tick the Block for posting button and save.
c)After the blocking of the GL, go to SE38 and enter RFSEPA01 as the program and press execute
d)Enter the Company code and the GL
e)Press Execute.
Now the line items were generated for the GL. Table BSIS was updated. Unblock the GL for further postings
Deactivation of line item management
Now for deactivating line item in a GL the following process should be followed.
a)Untick the line item display in the GL master and save
b)Block the GL for postings (as shown in 1.2.1)
c)Go to SE38 and enter RFSEPA04 as the program and press execute
d)Enter the Company code and the GL
e)Execute
After the execution of the program all the line items of that particular GL will be deleted from BSIS table. Unblock the GL for further postings
Regards,
Kiran

How do I grey a bubble on a line item that I don't want the user to be able to input, but leave the others active in a form?

How do I grey a bubble on a line item that I don't want the user to be able to input, but leave the others active in a form?

I may be missing something here, but can't you just set the item to "Read Only" in the general preferences for that item?

Doubts on clearing line items in profit centre and deleting the profit cent

Similar Messages

Maybe you are looking for