Doubts on IDOC Scenarios

Hi Experts,
1) How many Business/Technical Systems created for IDOC to File and
File to IDOC?
2) Is it necessary to create Business systems while doing above scenarios (both cases) ?
3) Is it necessary to create RFC Destination (like R/3 to XI and XI to R/3) while doing above scenarios (both cases) ?
4) What is Partner profiles? Is it necessary to choose the type while doing IDOC configurations?
Regards,
YRaj.

Hi refre this link
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
File to IDOC************************************************************
/people/shabarish.vijayakumar/blog/2006/11/26/adapter-scheduling--hail-sp-19-
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/fileToIDOC&
Any flat file to any IDoc
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Pls reward if useful

Similar Messages

Doubt in idoc scenario

hi,
We need to send the application acknowledgement to OTM system with out using BPM. If we needed we can split the scenario. Please suggest
from sap sending (ALEAUD01 idoc id :abc ,ref to 123 for SAP PI) and receiving SAP is (idoc id :123)
then from sap pi sending(xml-ack ref to :xyz?) to otm and receiving from otm to sap pi is (xml msg id:xyz)
this is the scenario
plz suggest some idea
regards
rsk

Hi,
Go through this blog.
How To Handle Acknowledgments for IDoc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
I hope this will solve your problem.
Regards,
Sarvesh

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

Error/Doubts in Idoc-XI-File scenario

Dear All,
I am doing one scenario in which DELIVERY idoc is posted from R/3 to XI and then from XI that idoc is to be sent as flat file to one local folder.
For this scenario, I have done all ALE settings and I am able to see the idoc in XI in cXML format.Now I want to sent it as flat file.
Now, for doing this I created 2 BS & 2 TS. 1 BS & TS of type Third Party for receiver & 1 BS & TS are of type Web as ABAP for sender. Then I have created one namespace in IR. I have not created any DT, MT, MI, MM becoz the structure of source and target file are same. Now, I created one IM in which I specified specified Type as "ABAP Class" & Mapping program name as one of the Z function module as specified in one of the SAP Guides.
Then in ID, I created 2 Parties ie. one for Sender & one for receiver. Sender is having a communication channel of type Idoc & receiver is having communication channel of type File. And thn further Receiver Agreement, Inetrface Determination, Sender Agreement & Receiver Agreement are configured.
In my system there is one scenario already configured which is using Delivery idoc so I have used party in my scenario for both sender & receiver.
Now, when I am sending the idoc from R/3, I am able to see cXML in SXMB_MONI but it is taking receiver as the one which is defined for the already existing scenario but not the receiver defined by me.
Can anybody guide if I have followed the correct steps & where I am doing the error.
Warm Regards,
N.Jain

Hi ,
Plese refer the following blogs ,
IDoc to File
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters
You have to do all this settings mentioned in the docuemnt:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/sapR3%28Idocs%29ToXI--Steps+Summarized&
Also can you check this weblogs on the same:
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
/people/michal.krawczyk2/blog/2005/03/29/xi-error--unable-to-convert-the-sender-service-to-an-ale-logical-system
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/saravanakumar.kuppusamy2/blog/2005/01/20/configuration-tips-for-a-business-serviceintegration-process-to-send-back-ale-audit-idoc
Thanks ,
Suvarna
Award pts if it helps .

Doubt in fields - message mapping (file 2 idoc scenario)

while doing message mapping in file 2 idoc scenario, i could not able find the values for some field names
( i am following this wiki help
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC& )
cremas04 idoc
vendorNo LIFNR
vendor name Name1
Pur_org ? ( I could not able locate field with the similar desc in idoc MT side)
Company code ?
Acc_Grp ?
Search term MCOD1
Address ADRNR
City ORT01
Pin_code PSLTZ
could you help me out with this?
Message was edited by: praba
praba

hi,
I got the answer.

Doubt in file 2 idoc scenario

hi,
I am trying to execute to file 2 idoc scenario.
I created DT,MT for XML file outbound system.
After importing idoc
how can i create DT, MT for idoc to connect oubound DT,MT (file side)?
I am following this wiki guide
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&

hi Raj,
It means in Idoc, for each field Mesage type, data type are defined, no need to create to once again here in XI.
plz if i understood wrongly means correct me.
ONE MORE THING
i imported cremas04 idoc,
in that EDI_DC40 contains control record
E1LFA1M contain data record
is it correct?

Doubt in idoc 2 file scenario

Hi,
I want to create idoc 2 file scenario with out any Transformation.
In that case how/what to create Data type for receiver.
I want to receive the same idoc in the receiver folder/Directory (like XML file) with out any transformation.
Thanks
Ruban

Hi,
For this scenario you need to create the Data type structures as similar to IDOC type and just have to transfer to file without FCC.
It will transfer the IDOC data as it is in XML format
refer
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/error%2bhandling%2bin%2bfile-idoc%2bscenario
(Just avoid using FCC conversions on receiver file adapter in above scenarios)
Thanks
Swarup
Edited by: Swarup Sawant on Mar 24, 2008 6:15 PM

File to IDOC Scenario - Doubt in RFC Destination

Hi all,
I m working on a File - IDOC Scenario. I got a IDX1 error Also when I try to import IDOC in IDX2, I got I:000 error message(No more information was given) . When I checked the RFC destination, Test Connection works fine. But Remote Logon didnt work, since the target system is not a Trusted System
Is it necessary to make the Target System, a Trusted System ? (For enabling Remote Logon)

Hi ,
There might be some problem with the R3 user that u r using...
For some versions of R3 it is required that the password be in CAPS for making an RFC connection...
I knw this sounds weird but even i had this problem....
Also chk if the XI user has RFC priviliges..
reward points if helpful
PrashANt

Issue in IDOC-XI-IDOC scenario

Hi,
We are facing a strange issue in an IDOC-XI-IDOC scenario. We are using a SAX parser to parse the code here.
The error we are getting in 'sxmb_moni' is
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/abc/def/dev/sapxi/clfmas/Idoc2IdocMapperCLFMAS</SAP:P1>
<SAP:P2>java.lang.RuntimeException</SAP:P2>
<SAP:P3>For input string: ""</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>During the application mapping com/abc/def/dev/sapxi/clfmas/Idoc2IdocMapperCLFMAS a java.lang.RuntimeException was thrown: For input string: ""</SAP:Stack>
The strange thing is, when I restart the message, it gets processed successfully. Also, when I copy the payload, and test the same on a different environment, it gets processed successfully.
Would really appreciate some pointers here!
cheers,
Prashanth

Hi,
This related to mapping error check it once again.Check in Interface mapping Test tab.see the result.check the sxmb_moni and get the source of mapping come back to interfcae mapping and test .
See the below links
Hi I got EXCEPTION_DURING_EXECUTE in RWB->Message Monitoring
I am getting MAPPING EXCEPTION_DURING_EXECUTE
EXCEPTION_DURING_EXECUTE- Error in Mapping. Doubt about IE and AE
EXCEPTION_DURING_EXECUTE
Mapping problem - EXCEPTION_DURING_EXECUTE
ERR: EXCEPTION_DURING_EXECUTE while using FILE CONTENT CONVERSION
Regards
Chilla..

Where to define third party logical system name in file to idoc scenario

Hi Friends,
I am shalini shah.
I have one doubt, where I can define the logical system name in File to Idoc scenario.
I created Logical system for R/3 system in SALE t.code, but where to define the Third party logical system ,
In SALE or any where.
Please give me solution.
Warm Regards,
Shalini Shah

Hi Shalini,
You need to create Business system in SLD and import the business system in ID.Then u will start with the configuration.
Just refer the below link for configurations with step by step solution.
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
Thnx
Chirag

File to Idoc Scenario. Pls advice

Hi All,
I have implemented File to Idoc Scenario and it worked fine.
I have 2 doubts:
My Scenario: File -- XI -- R/3 system named D01
1. In Configuration: In Receiver Aggrement why we put
    XI Business System name in Sender Service?
2. In Configuration when I open my R/3 Business system
    (D01CLNT100) and click on Adapter Specfic Identifiers I can
    see my Logical System Name as D01CLNT100.
    When I use SALE tx. in D01 R/3 system I can see
    D01CLNT100 as logical system
    Question: If I use SALE transaction and change my
    logical system name to "test" , do I need to change the
    name "test" in SLD and then for R/3 Business system
    (D01CLNT100) in Adapter Specfic Identifiers I will see new
     Logical System Name as test.
Regards

Hi,
Question: If I use SALE transaction and change my logical system name to "test" , do I need to change the name "test" in SLD and then for R/3 Business system (D01CLNT100) in Adapter Specfic Identifiers I will see new Logical System Name as test
Yes , you need to Update the name in SLD and just Do SLD Data Cache in ID-- Environment to reflect the same name in Identifiers place.
>>1. In Configuration: In Receiver Aggrement why we put XI Business System name in Sender Service?
You might have used XI as Sender and you might have placed the file in XI Server to pickup.
Thats why you are using Xi's Business System name as Sender Serveice.
Regards
Seshagiri

Regarding File to Idoc Scenario

Dear Friends,
I am performing File to Idoc Scenario in XI 3.0. Here I got struck, I am not able to see my sender file in SXMB_IFR. It is saying that no messages availabe for selection. The file was picked up successfully from the souce. Please help me.
Thanks in advance.

check the error/ warning message that would be available at the end of the page (in RWB....where you see th yellow triangle)......even my IE is showing a yellow triangle but none of my interfaces are facing a problem.....just check for the status of the Communication channel in AE.....since your message is not transferred to SXMB_MONI confirm that the channel log is showing successful.....also can you tell what is teh status of other interfaces?.....are they running fine?...if yes then there seems to be problem with the sender channel......are you using any FCC?
One such situation where IE is showing yellow status is mentioned here: RWB Integration Engine status yellow
Just one doubt to ask...are you using the required Sender channel in the Sender Agreement?...hope there is no mismatch here....
Regards,
Abhishek.
Edited by: abhishek salvi on Jul 14, 2009 11:38 AM

JMS to IDOC scenario...

Hi,
I am doing an JMS to IDOC scenario...
where will i mention saying there is a logical system in R3(Partner profile).The IDoc should reach that Logical system only.I have a doubt on this....Because we are disabling the IDOC EDIDC segemnt in Recever segment.so.
Please guide me.

You fill the mandt field like SNDRPRT, RCVRPRT and others in the mapping and you can take care of rest in the R/3 side.
You could fill up it in mapping and apply the Check box as mark for considering the control record from Payload in communication channel. Just pass the mandatory fields as you have used the details to configure the prtner profile and port.
You could also specify the Adapter specific attributes with the same logical system name in Busines system or service that could fill-up the control records internally.
Refer
http://help.sap.com/saphelp_nw04/helpdata/en/13/95244269625633e10000000a155106/frameset.htm
SAP Network Blog: Manipulating Idoc Control Records from Payload
Manipulating Idoc Control Records from Payload
changing IDOC control record by XSL Mapping

Error while executing a JDBC to Idoc scenario : No standard agreement found

Hello SAP PI Gurus,
I am having a JDBC to idoc Scenario .And the interface is running at 10 min of duration.
<SAP:AdditionalText>No standard agreement found for ,
BS_EXT_CTBSREPDB, , BS_ERPQAS_QE1_320, http://XYZ.com/FI/FI_FI_01/Charges, FIDCC2</SAP:AdditionalText>.
While i test the configuration...i get an error in reciever agreement as mentioned above.
Can you pls help me in resolving this issue.
Regards,
Ravi

Hi,
I think the problem is with namespace....for IDOC the namespace will be "urn:sap-com:document:sap:idoc:messages"...but in your case it is different.....i.e http:....etc.....please check whether you 've used the same IDOC withe above mentioned namespace in all the configuration objects like interface determination, receiveragreement etc.....
Thanks
Priyanka

Idoc-XI-Idoc Scenario

Dear All,
I am working on Idoc-XI-Idoc scenario in which I am getting ORDRSP Idoc in input. In one of its segment I am getting value as either A or B. If value is coming as A in input then in the output we want PORDCR101 Idoc but if we have B as value in the source idoc then we should have multiple PORDCR102 Idocs ie for each line item there will be different idocs.
Please guide me on how we can implement BPM in this scenario as required two MM i have created and they are working fine.
Regards,
NJ

Hi,
If value is coming as A in input then in the output we want PORDCR101 Idoc but if we
have B as value in the source idoc then we should have multiple PORDCR102 Idocs ie for
each line item there will be different idocs.
For Source = A:
SourceField----
-----equalS ----ifwithoutElse ----then Constant(blank) ---> PORDCR101
Constant(A)---
Assuming that A in input then in the output we want PORDCR101 Idoc means that you need only one occurence of the IDOC
For Source = B:
SourceField----
-----equalS ----ifwithoutElse ----then LineItem ---> PORDCR102
Constant(B)---
Regards,
ABhishek.

Doubts on IDOC Scenarios

Similar Messages

Maybe you are looking for