Doubts on SAP@WEB studio

Hi guys,
we are using integrated ITS. I am using SAP2@web studio for developing templates. I am trying to create a site in this it is asking for host and instance details. I am not quite sure where can i get these data from the R/3 system. I have checked in SE80 > utilities> ITS--> test services. I got the below information.
HTTP : gbdci550.in.cox.com:8011
standard path : /sap/bc/gui/sap/its/
Please let me know what needs to be kept in the host and instance details..
thanks in advance
sankar

Hi Raj and Michael,
Thank you very much for your replies.
We are having an external ITS also. In that case what do I put in the host and instance details of the SAP@webstudio in the site definition.
In the path SE80 > utilities> ITS--> test services., in external ITS i find the below details..
server : esealnt868-869
path : /scripts/wgate/
the url we use for EBP is as mentioned below
http://sapebp.al.sw.setintifv.se/scripts/wgate/bbpstart/!?~language=en
Please let me know what should i use in host and instance details. Also let me know if you need any further information from my side.
thanks
sankar

Similar Messages

Download SAP@Web Studio?

Hi
I need to make some changes to a couple of old ESS ITS based applications. For that I need SAP@Web Studio.
Where can I download that from?
Regards,
Jacob Vennervald

Hi Jacob,
SAP@Web Studio can be downloaded from the Service Marketplace http://service.sap.com/patches. It should only be used with systems older than 46C.
I would recommend you to upload the services to the SE80 and work with Web Application Builder.
Best regards,
Klaus

Doubt regarding SAP WebAs

hi frds,
 1) what is the use of WebAs?
 2) All SAP Components can run in SAP WebAs?
 3) SAP System means SAP WebAS ?
 4) XI Components like IR,IDand SLD..etc reside on SAP WebAS...like this other SAP Netweaver Components like EP Components also reside in 2 stacks of SAP WebAS?
 5)How the XI Message flows from sender Business system to Receiver Business system via WebAS ? plz give example?
 6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?

hi Murali
1) WAS : SAP Web Application Server is a scalable and reliable component platform. It supports the development and operation of J2EE-based and ABAP-based Web applications and Web services. SAP Web Application Server embraces native Web technologies while providing all the benefits of what has previously been referred to as SAP Basis including the benefits of the proven and scalable data, system, and software lifecycle management capabilities that SAP is known for.
2) The new release of SAP Web Application Server offers full compliance with J2EE 1.3 standard. A completely revamped load-balancing technique highly improves the scalability of the server. Internal persistent information that the system needs to access is now stored in a conventional relational database increasing the robustness and the reliability of the server.
3) SAP System not means SAP WebAS but other parts are also involved
4) yes XI Components like IR,IDand SLD..etc reside on SAP WebAS
5)To know about flow you go through a scenario from TBIT
TBIT40:
https://websmp109.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT40
6) What is Difference between SAP System and SAP WebAS and 3rd Party Systems?
SAP Web Application Server adds business value because it
● Allows customers
● to run any 3rd party J2EE 1.3 compliant application
● to develop and run their own J2EE 1.3 compliant applications
● to easily extend SAP solutions on the basis of ABAP and J2EE technology
● Offers an highly improved load-balancing which results in much better performance and, even more important provides much better scalability
so third party business system is party's own system which is being integrated by SAP XI
for more details on WAS kindly follow this link
http://help.sap.com/saphelp_nw04/helpdata/en/92/7e63423dbc0e53e10000000a155106/frameset.htm
Thanks
sandeep
PS; if helpful reward points

Trial version of SAP Web Dynpro Developer Studio.

Hi Experts,
I have downloaded and installed the trial version of Java SAP NetWeaver Application Server.
I now need to download Java SAP Web Dynpro Developer Studio.
Can any one tell me where I can download the trial version of SAP Web Dynpro Developer Studio?
Thanks,
Anna

Hi,
I think u can find n/w developer studio in the service market place. http://service.sap.com/swdc
In the left panel go thorugh :-
Downloads > Support Packages and Patches > SAP NetWeaver > SAP NETWEAVER > SAP NETWEAVER 7.0 > Entry by Component > Developer Studio
Rgds
Radhakrishna

System Refresh Process of SAP Web AS 6.20 in BW env

We are in the process to refresh our BQA system from the offline backup copy of BPR(Production server). We did it number of times in 4.6 R/3 server successfully in past. We used the oracle backup/restore method for refresh process in R/3. The same oracle backup/restore method we used for BW refresh. But this method is not able to change the schema name in tablespace (in BQA system, tablespace are like PSAPBQAFACT and in BP1 , it is PSAPBP1FACT). Seems to me this is not the right method to refresh SAP Web AS 6.20 and above systems.
Could anyone pls suggest the right documents or if someone has the procedure for refresh process of SAP Web AS 6.20, pls confirm.

Hi Reiner! Thanks for your reply!
- I want to create a secure connection between the .NET client and the SAP Web AS 6.20 Web Service, and HTTPS would be great. Is there any documentation regarding this issue?
- No, I don't want to provide the result of a Web Service as a Web Service. Maybe I was quite unclear... :/ What I meant was:
I want my Web Service to return a table (the result comes in the structure of a table). How do I define the Out-parameter in transaction se37 to accomplish this? Right now the best solution I got was to construct an array of strings (like the ZZVALUES int array in the example) where each position of the array, is a string that has the various fields of the table i want to return concatenated.
I'm able to retrieve the array in Visual Studio .NET 2003 client, and separate the fields (to fill a table again with them). If I could just return the table from SAP and receive it in .NET would be much more simpler.
Thanks again.

Have installed SAP webAS 6.2

hello,
I have installed a CD named SAP WEB AS Rel.6.2.
And I dont know whethear it is WEBAS or not.
Infact It has loaded SAP J2EE engine.
Is this SAP J2EE Engine is SAP WebAS?
Please let us know whethear both are same or not?
And also let me know how to connect this WebAS with R/3?
I have successfully installed the SAP J2EE Engine and I dont know how to work with that also..Infact I dont have the Administrator password also.
Can anyone help me in configuring this WebAS?
and I didnt get the NetWeaver Development Studio-An IDE for Web based Application Development in the tools given by the SAP?
How can i get that IDE?
Please help me in configuring all these?
Am really in need of HELP ...
Regards,
Raja

Hi Raja Shekhar,
People on this forum generally post questions that are specific to a particular problem they face while using SAP.
If you need help getting started on SAP Web AS, have a look at
http://help.sap.com
Also sdn.sap.com has good content on SAP Web AS.
one such good document for beginners is available at the link below:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e1515a37-0301-0010-b2bb-99780cb4cafa
Also you can find the administration manual for SAP WebAS on help.sap.com
http://help.sap.com/saphelp_nw70/helpdata/en/1a/819d42449b0731e10000000a1550b0/frameset.htm
Hope that helps and good luck with your learning.
Regards,
Siddhesh

Query Service in SAP WEB AS 6.20

Hello everybody,
I want to use Object Services at a SAP WEB AS 6.20 system. In the SAP help documents I have read that a Query Service is part of that Object Service. Generating a Persistence Class and the Class Actor (CA-Class) at a WEB AS 6.20 System I cannot find this Query Service. There is no method called IF_OS_CA_PERSISTENCY~GET_PERSISTENT_BY_QUERY in the Class Actor (CA-Class).
Is there a possibility to add this service to version 6.20?
At SAP WEB AS 7.0 the Query Service is available.
Can anybody help me?
Thanks and Regards,
Georg

Hi Reiner! Thanks for your reply!
- I want to create a secure connection between the .NET client and the SAP Web AS 6.20 Web Service, and HTTPS would be great. Is there any documentation regarding this issue?
- No, I don't want to provide the result of a Web Service as a Web Service. Maybe I was quite unclear... :/ What I meant was:
I want my Web Service to return a table (the result comes in the structure of a table). How do I define the Out-parameter in transaction se37 to accomplish this? Right now the best solution I got was to construct an array of strings (like the ZZVALUES int array in the example) where each position of the array, is a string that has the various fields of the table i want to return concatenated.
I'm able to retrieve the array in Visual Studio .NET 2003 client, and separate the fields (to fill a table again with them). If I could just return the table from SAP and receive it in .NET would be much more simpler.
Thanks again.

New features provided by SAP Web AS 7.00 and 7.10

Hello!
I am interested, which features are provided starting with Sap Web AS 7.00 and 7.10, generally as well as special for both runtimes
in ABAP-area (e.g. VM in ABAP, Code-completion)
in Java-area (e.g. J2EE 1.4/1.5, Portlets, Comunication mechanisms JRA/JCO, bgRFC)
DB-API-???
Thank You in advance!
Regards
A. Henke

hi
new features added in WAS7.0 for ABAP stack
1.Webdynpro for ABAP
2.New Enhancement Framework
3.Switch Frame Work
4.Adobe Forms integeration
5.New features added to ABAP Editor.
Also note that MySAP Business Suite is also the part of WAS7.0 release.
For Java stack new features have been added to Netweaver Developer Studio,EP and KM areas.Also BI-Java is also the part of WAS7.0 Release.
Cheers,
Abdul Hakim
Mark all useful answers..

Error while installing SAP Web AS

Dear all,
   We had already installed SAP NetWeaver Developer studio 2.0.11.
   Now, we are trying to install SAP Web Application Server 6.40 in Default Mode As Java in windows using Oracle database.
    Please assist me in solving the following error :
WARNING 2008-05-29 18:33:45
Error 2 (The system cannot find the file specified.) in execution of a 'CreateProcess' function, line (271), with parameter (C:\oracle\ora92/bin/oradim -DELETE -SID J2E).
Thanks in advance,
Vijay.

Hi Usha,
          Very thanx for the help. but there is no such folder(SAPINST_INSTDIR) created in Program Files.
          For your info, SAP Web AS 6.40 Installation teriminated in half the way.
          Please help me with other solution. Its very urgent.
Regards,
Vijay.

Not able to install SAP Web Application Server -6.40

iam running on SAP NETWEAVER Studio 6.0.21 in Windows XP operating System , not able to install SAP Web Apllication Software -6.40 .
iam not sure what to choose(while Installation) central system or distributed System ,i have tried in either way but
still not able to install the software .
If i go with Sap System Installtion>Java System >Distributed system>Java Central Instance installation ,it throws me getJavaHome was executed with status error ......
then ,
what is the version of Sap Web Application Server to be installed if my system runs on
SAP NETWEAVER Studio 6.0.21 or 6.0.11
cheers
Sundar

Hello,
What do you want to do exactly?
You speak about SAP Netweaver Studio? I suppose you mean Netweaver Developer Studio?
Do you want to install a complete SAP System on your windows XP?? or only the Java part?
Thanks to give us more info
Olivier

Implementaion of ADS on SAP Web AS ABAP

Dear All
We have an ECC6.0 setup on Oracle Solaris as SAP Web AS ABAP only. We now want to install & configure ADS (Adobe Document Services) on it. Is it possible to do so on ABAP only system or do we need to have ABAP + Java system. In case, we can, can someone provide me link for the same.
Thanks
Lokesh.

Thanks Markus. I am now trying to implement ADS in another server which ahs ABAP+Java installation in same box with SAP Netweaver 7.0.
I have done all the steps as per the configuration guide and am detailing teh same here. However, I am unable to run the application. Please help.
I am detailing the steps taken as per the configuration guide.
1. Checking the IIOP service - This is working fine as per the guide.
2. I have chosen to use Basic authentication
3. Executing FP_TEST_00 fails
4. Executing FP_PDF_TEST_00 did show me the version infomation initially but after changing the
ADSUSER password in SU01, it has started showing a username and password box which doesnot accept
ADSUSER and the new password.
5. I have created a user ADSUSER as system user and assigned a password to it. I have created
ADSCALLERS role and assigned it to ADSUSER.
6. I have created an ABAP connection as per the guide. However, in test connection, I am prompted for
a user and password. Specifying ADSUSER doesnot work. However specifying j2ee_admin user gives the
test result as Found.
7. On running Test for user in http://<server>:50000/AdobeDocumentServices/Config in browser, the
ADSUSER or ADS_AGENT password doesnot get accepted. j2ee_admin user and password gives the error
"User J2EE_ADMIN does not have access to method rpData."
8. Even in Visual Administrator, I have checked the ADSUSER to be under ADSCallers group. Also the
ADSUSER is mapped to ADSCaller security role. However, one point noticable is that when I try to
change the password of ADSUSER in user management under ADSCallers, it doesnot allow me to do so.
Here I am in doubt as in SU01, I have changed the password while in Visual Admin, it is still the initial
one. Is this conflicting.
9. In the link http://<AS Java Server>:50000 ->User Management, I am unable to set Security policy
field to Technical user and it is grayed out even after clicking modify. Am also not able to delete the
ADSUSER from it.
10. In visual administrator, I have setup the basic authentication too in web services security node and
have activated the service throught the deploy node
11. I have created a user ADS_AGENT as service user through SU01 and defined password for it and
assigned role SAP_BC_FP_ICF & SAP_BC_FPADS_ICF to it.
12. I have activated the fp & fpads service through SICF ->default_host ->sap ->bc ->fp. Right Click &
Activate
13. The checking of destination service through FP_CHECK_DESTINATION_SERVICE prompts for a
username and password and doesnot accept ADSUSER or ADS_AGENT and j2ee_admin user is giving
error of rpdata authorization.
14. The ICF service through web browser using link
http://<server>:8000/sap/bc/fp/form/layout/fp_test_00.xdp accepts ADS_AGENT user and displays an
XML code.
15. The test of changing of Destination Service to
http://<server>:8000/sap/bc/fp/form/layout/fp_test_00.xdp through Visual Admin results in HTTP GET
response code 200 Content type text/html
I have worked my brains out on this but unable to understand the problem. I think it is because I am not able to change the password of ADSUSER things are not working.
Please help me out.
Lokesh

SAP netweaver studio requirements

Hello ,
i have installed SAP NetWeaver Developer Studio Version 2.0.4 at my system which comes with the SAP web application server . I am remotely connecting to a 4.6c .
The IDE cant find any J2EE engine running ,
What do i need in order to test/deploy a J2EE appl. ?

I also have access to an IDES 4.7 system , can i use it to develop the j2ee applications .

Installation of SAP Web A S Java 6.40 SP3u0092 at u0091Logon Information' pane

I am trying to install the following evaluation softwares in bold letters from http://sdn.sap.com on my computer. The installation notes comes with the package SAP Web Application Server when I download it. I am following the installation notes as guided. The hardware/software requirements before installing the following are
·     A Windows PC with at least 1Gb of memory and at least 6Gb of free disk-space
·     Microsoft Windows 2000 (at least SP3) or Windows Server 2003
·     Installed Microsoft SQL Server 2000 with all updates that are explained here
·     Installed Sun JDK 1.4.2_04 (Note that there are some known issues with this version. Please use 1.4.2_05 as soon as it is publicly available)
·     Installation target must be a NTFS drive (FAT won't work)
Except for Microsoft SQL Server 2000 I have everything. I am using a Microsoft SQL 2005 Evaluation edition in place of SQL 2000.
1. SAP Web Application Server Java 6.40 SP3
2. Patching of SAP Web Application Server to SP5
3. SAP NetWeaver Developer Studio SP5
4. SAP Enterprise Portal 6.0 SP3
5. Patching of SAP Enterprise Portal to SP4
The URL for Quick Installation Notes is
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/installation guide ep sneak preview sp4.pdf
I get this error when I am trying to run Installation of SAP Web Application Server Java 6.40 SP3 at Logon Information pane.
ERROR 2004-09-03 10:39:35
MDB-05043 Script "->srv_j2ee.sql" not found
ERROR 2004-09-03 10:39:35
MDB-05034 Call to a threaded function returned "1".
WARNING 2004-09-03 10:39:35
The step dAskForConnection with step key J2EE_EngineEnterprise_OneHost|ind|ind|ind|WebAS|630|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|J2EE_Engine|ind|ind|ind|J2EE_Engine|630|0|MssJ2eeDatabase|ind|ind|ind|ind|ind|0|MssLoginInfo|ind|ind|ind|ind|ind|0|dAskForConnection was executed with status ERROR.
Any ideas on how do I fix this. Do I need a Microsoft SQL 2000 server? Please help me.
Thanks
Rakesh

Hi,
It is always good to go with whatever is specified in the installation guide. So ideally, i would suggest you to go for MS SQL Server 2000, its patches and hotfixes.
But yes, if you want to play around with it, you can just copy srv_j2ee.sql file from a system where SAP WAS 6.30 is already installed and place it exactly where it is required.
Secondly, there are some patches and hotfixes that needs to be applied when working with SQL Server 2000. I am not sure if you have the similar patches and hotfixes for your evaluation version too. Just check up on that at SDN. I am sure, it wont work without the patches and hotfix.
At the end, i would again like to add that this is just a work around and not an appropriate solution. Just give it a try. If it doesnt work you need to use SQL Server 2000 as documented in the guide.
Mark it as answered if this answers your question.

Installation of SAP Web Application Server Java 6.40 SP9 (SAP Press)

I wanted to install the Net WeaverDeveloper Studio and Development Infrastructureprovided on the CD (SAP PRESS) SAP Web Application Server. After starting the installtaion prcedure from the CD I get following message:
An Error occured during the installation of MaxDB > CentralSystem > Migration - Target System Installation. After pressing TheLogViewButton I get the LogBrowserInformation:
1.
WARNING 2006-08-15 12:47:25
Error 5 (Zugriff verweigert
) in execution of a 'RegOpenKeyEx' function, line (67), with parameter (SYSTEM\CurrentControlSet\Services\EraserUtilDrv10620).
2.
WARNING 2006-08-15 12:47:25
The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EraserUtilDrv10620' does not exist on the 'localhost' host.
3.
WARNING 2006-08-15 12:47:25
The step setDefaults with step key Development_Workplace_SAPPress|ind|ind|ind|WebAS|640|0|J2EE_SystemCopy|ind|ind|ind|ind|ind|0|J2EE_EngineEnterpriseDialogs|ind|ind|ind|WebAS|630|0|setDefaults was executed with status ERROR.
It's impossible for me to install this release. Could anyone help me to get the Product installed?????????
Thanks

Halo Mikael,
I haven't installed anti-virus functionality. In the meantime I could install the DB as well the NetWeaver seperately which doesn't help me further because I don't get any conection to the WebAs fro deployment. I get following message while trying to deploy:
Deployment exception : Cannot determine sdm host (is empty). Please configure your engine/sdm correctly !
I don't know where the engine has been installed and how to configure it.
If Itry to configure the eingine via WIndow>Preferences> SAP J2EE engine : engine installed on localhost ; then I get the following message:
No local engine could be found.
No systemcould be found under
Pal-Singh
sapmnt.
It's realy very frustrating. Could you please help me to get further?????????
Thanks with best regards.

SAP Web AS for CE 7.1

Hi all,
I have installed SAP Netweaver Development Studio CE 7.1. Now, can I install SAP Web AS in my system? If yes where can I find the software? What version should I install?
Are there any servers where I can connect from CE 7.1 and work?
Regards,
lohit

Hi Lohit,
The CE server name should be the hostname of the server the Composition Environment is running on. So, if the CE is installed on a server called "yaddayadda", the URL should be <a href>http://yaddayadda.yourdomain.com:50000</a>.
But do I see it correctly that you only have installed the Developer Studio? In that case you don't have a Composition Environment installed. The Developer Studio needs a running CE to connect and deploy to.
If I'm mistaken, then be sure to use as CE server name the fully qualified domain name of the server the CE is running on, not the machine you run Developer Studio on (unless they are the same...).
I hope this helps,
Henk.

Doubts on SAP@WEB studio

Similar Messages

Maybe you are looking for