Doubts regarding the SDN BPM scenerio!

Hi Experts,
I was tryin on the BPM scenerio made my Murthy.
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
I have completeted all the steps.
The communication channels are up and running well. But I simply cant get to the last step.
In the last step:
"To monitor Integration process log, go to transaction SXMB_MONI_BPE ->Process Selection->Select corresponding integration process (in Service Field) ->Execute->Select work item."
I simply cant get to see ANY FIELDS in Process Selection. It is all blank . And when I am putting no selection criteria, and simply executing it, then also it is giving NO VALUES.
Experts, can u suggest, what step, am I missing, any settings, any step, that I hav skipped.
PS.
I hav checked each step thoroughly.
I hav avtivated all items.
Regards,
Arnab.
I am also getting an error in SXMB_MONI:
<SAP:Stack>No receiver agreement found for sender -BS_FILE_BPM to receiver -IP_File_to_File,urn:bpm_am.MI_FILE_to_BPM_ABS</SAP:Stack> .
Pls comment Experts:
Regards,
Arnab
Edited by: Arnab Mondal on Jan 6, 2009 7:14 AM

>
> "To monitor Integration process log, go to transaction SXMB_MONI_BPE ->Process Selection->Select corresponding integration process (in Service Field) ->Execute->Select work item."
> I simply cant get to see ANY FIELDS in Process Selection. It is all blank . And when I am putting no selection criteria, and simply executing it, then also it is giving NO VALUES.
You will see that only if the BPM was executed. Seems your BPM is not executed yet. In SXMB_MONI, for the entry of your process, do you see a column with PE ? if so try clicking and drilling down
> I am also getting an error in SXMB_MONI:
> <SAP:Stack>No receiver agreement found for sender -BS_FILE_BPM to receiver -IP_File_to_File,urn:bpm_am.MI_FILE_to_BPM_ABS</SAP:Stack> .
have you created the receiver agreements?
there will be two receiver agreements;
1. from sender system to BPM.
2. BPM to receiver system.

Similar Messages

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Doubts regarding the CTTYP field after a PU12 run

Hi Everyone,
I had some doubts regarding PU12. When I maintain the IT16 data for an employee belonging to Employee Group/Subgroup E/52, I want to keep the contract type blank. However, when I do this, CTTYP is not sent through in the IDoc after PU12 processing. I would like to know if this is standard behaviour. (If it is maintained as say unlimited contract, the field is sent through with the value 01) If I would like to send CTTYP through as 00, can I do it? Would I have to maintain a conversion? As of now, this field is configured as a key field in my system.
Regards,
Alpana.

I presume that you cave a template for your documents with unsigned signature fields. Add a text filed (or other field type that you wish to use) to this template. Then you will be able to fill in this field after signing.

Basic doubts Regarding the RFC to File scenario.

Hi All,
I'm doing a RFC to File scenario, so before starting the development i went through many blogs and sites to know more the about scenario. I'm confused in the step where we have to create a RFC (type TCP/IP) in sm59.
I have the following doubts :
1)whether to create the RFC in sender (which will be ECC system) or XI.
i.e., RFC in sender (ECC) pointing to xi system in sm59 of Sender(ECC)
or
in XI pointing to sender (ECC) system.
2) the program id maintained in RFC.
the program id is any name or the FM which is being imported in XI system.
Thanks in Advance,
Kind Regards,
Lalitkumar.

Hi Lalitkumar,
1)whether to create the RFC in sender (which will be ECC system) or XI.
i.e., RFC in sender (ECC) pointing to xi system in sm59 of Sender(ECC)
or
in XI pointing to sender (ECC) system.
It should be in sender ECC.
2) the program id maintained in RFC.
the program id is any name or the FM which is being imported in XI system.
It can be any name but should be same in RFC destination and RFC adapter.
As stefen mentioned use ABAP proxy inspite of RFC as its better performance wise.
Regds,
Pinangshuk.

Doubt in the Oracle BPM Tutorial

Hi All,
Iam new to this Oracle BPM..
Moreover i have installed the studio and other files... But at the point of working with the TUTORIAL iam getting an error as...
All arguments must be fulfilled when defining the incoming argument mapping of a screenflow invocation task *(Activity:Create Expense Report, task: Create Expense Report).*
In the Expense Report Process of ACTIVITY 3... At Designing a Screen flow...I cannot understand the steps from 16 to 18..
Moreover at the step 18 in Designing a Screen flow i.e. Add an entry to the Submit Report Out page
On clicking on OK button after this step. It is retuning an error with the UNABLE TO FIND THE VARIABLE ReportSfArg...
Can any one pls help me out in this issue...

Take a look at this link: Re: the project publication has failed
The tutorial takes you through argument mapping in a very obtuse manner. After looking at the above link if you still have not found the problem, share a copy of an export of your project and we'll help you debug it.
Dan

Doubts regarding the filters

Hi All,
      I am creating a qurey in the BEx Analyzer in BI 7.0 which consists of some dropdown boxes for materials and sales organisation.
      My requirement is this:
             If I select the particular material (Ex: M100), only the sales organisations which are availble for the material should have to be displayed.
     Pls give me ur valuable suggestions regarding this problem.
With Regards,
Yokesh.

Dear Yokesh,
Restirct the Material with the particular Material number (Ex: M100).
or
Restrict the Material with a Variable.
Create a Char variable on Material : Give value (Ex: M100), only the sales organisations which are availble for the material would be displayed.
Regards,
Ram.

Doubts regarding the 'Append Row' button

Hi Experts,
I have created one ABAP screen. In this ABAP screen I can see 'Append Row' button. I want to know what code is executed after this button is clicked.
Answer of this question is very important. As it will help me in resolving one important query.
The query is mentioned in my other two threads that I have created today.
Thanks in advance
Smith

Hi Vijay,
I have used class CL_GUI_ALV_GRID for creation of the screen. I can see that function = '&LOCAL&APPEND' of method handle_toolbar_set is responsible for creation of this push button.
Regards,
Smith

I have doubt regarding the byte to integer conversion.

In java card epurse application the output we see is in bytes.to convert this byte to integer which is understandable by the end-user what should be done?

809295 wrote:
In java card epurse application the output we see is in bytes .
to convert this byte to integer which is understandable by the end-user what should be done?What do you mean by we ?
How many bytes ?
On a java card platform support for integer is optional, you may only have short.
I assume by understandable by the end-user you mean display as a sequence of decimal digits ?
So two bytes 0x04 0xd2 (combined to a short 0x04d2 which is 1234 decimal)
should be presented to the user as 0x31 0x32 0x33 0x34 (ascii values for '1' '2' '3' '4').

A doubt regarding the usage of Reflection

There are several classes A, B, C, D,.... in a package.
A, B, C & D are generic names given to the java files inside the package.
They actually indicate files selected by the user during run-time.
A a = new A();
B b = a.getB();
C c = b.getC();
D d = c.getD();
int count = d.getCount();
a.getB() returns an instance of B.
similarly with getC() & getD() too.
The classes indicated by A, B, C & D are selected by the user.
So, I need to use reflection to implement the above 5 statements.
How do I go about doing this?
Thanks

Basically to create an instance of a dynamic class:
Class cl = Class.forName(myClassName); // get class
for name
Object o = cl.newInstance(); // create an instance
the above code works fine, if Iam dealing with a single class.
But my problem is Class A returns an object of Class B
which I need to use to get an Object of class C and so on until I get the required data to be parsed form the XML document.
When I invoke a method in Class A, it returns an object(of class B, which I need to use to invoke a method in class B) and so on to get the final value.
I have a large XML document as shown below, which I need to parse.
!-- an xml document -->
<Element A>
   <Element B>
      <Element P>
         Some data for Element P
      <Element Q>
         Some data for Element Q
      <Element R>
   </Element B>
   <Element C>
   <Element D>
   <Element E>
</Element A>I have a class that represents the whole document with the main elements in it. (Class A representing the whole document along with objects representing the main Elements B, C, D & E)
Each element in turn has its own class which are necessary to access the sub-elements of it. (Class B representing Element B and also including Element P & Q)
If I want to parse a specific part of the document(if i need to get the data in Element P), I need to get the Element B from a Class A and use that Object representing Element B to get Element P and then use it to get the required data.
Each class returns a part of the document and as you use the classes(and the returned part of the document), we narrow down to the required region to get the data.

Doubt's regarding the Hierarchial Queries in Oracle

Hi,
i have a doubt regarding the Hierarchial Queries in Oracle.
SELECT * FROM TMP_TEST;
ID     NUMVAL     STRVAL
1     100     Hello
1     -100     World
2     1     Concatenate
2     2     In String
2     3     using Connect By
2     4     Using SYS_CONNECT_BY_PATH
i am clear with my execution of IN_Line view (mechanism how it work's) .
But i have also read about the Hierarchial queries in the Oracle product documentation's. i am also aware of the
SYS_CONNECT_BY_PATH , LEVEL & START WITH , CONNECT BY Keywords.
But i couldnot able to Manually work out as how this below Query works.
Can you please explain me how this Hieracial query works ?
SELECT ID, (SYS_CONNECT_BY_PATH(STRVAL,',')),LEVEL
FROM
SELECT ID,STRVAL,ROW_NUMBER() OVER(PARTITION BY ID ORDER BY ID) RNUM,
COUNT(*) OVER(PARTITION BY ID ORDER BY ID) CNT,NUMVAL
FROM TMP_TEST
START WITH RNUM = 1
CONNECT BY PRIOR RNUM = RNUM - 1
Many Thanks,
Rajesh.

Hi, Rajesh,
My first message was in response to your first message.
In your latest message, the query is:
SELECT ID, (SYS_CONNECT_BY_PATH(STRVAL,',')),LEVEL
FROM    (
        SELECT ID,STRVAL,ROW_NUMBER() OVER(PARTITION BY ID ORDER BY ID) RNUM,
                COUNT(*) OVER(PARTITION BY ID ORDER BY ID) CNT,NUMVAL
        FROM TMP_TEST
WHERE   RNUM = CNT
START WITH RNUM = 1
CONNECT BY PRIOR RNUM = RNUM - 1;It looks like you lost the second CONNECT BY condition:
AND PRIOR ID = IDPut it back: it's important.
Now you're confused about the output row:
2    ,Hello,World,using Connect By,Using SYS_CONNECT_BY_PATH   4It doesn't seem to correspond to anything results that you got when you ran the sub-query alone.
That's because the resutls from your sub-query may change every time you run it, even though the data doesn't change. The ORDER BY clauses in both of the analytic functions do not result in a complete ordering. In fact, they're completely meaningless. It never makes any sense to PARTITON BY and ORDER BY the same value; "PARTITION BY id" means that only rows with the same id will be compared to each other; you might as well say "ORDER BY 0" or "ORDER BY dmbs_random.value".
The ORDER BY clause of ROW_NUMBER whould reflect that way in which you want the results to appear within each id, for example:
ROW_NUMBER () OVER (PARTITION BY id ORDER BY UPPER (strval))Note that this is very similar to what was in my first reply.
In the COUNT function, why do you want an ORDER BY clause at all? Just say:
COUNT (*) OVER (PARTITION BY id)

Doubt regarding SHDB transaction

Hi All,
            I have a doubt regarding the Process Tab in the application tool bar of SHDB transaction. What is the use of the following check boxes?
1)       Default Size
2)       Cont.after commit
3)      not a batch input session
4)      END: Not a Batch Input session
5)      Simulate Background mode

Hi,
Basically these are the properties for CALL TRANSACTION using. You need not worry about these unless you really need those.
1) Default Size: it will set the Default screen size for CALL TRANSACTION USING...
2) Cont.after commit : it will set indicator that CALL TRANSACTION USING... is not completed by COMMIT. after commit also the process will continue
3) not a batch input session: sets indicator that present session is not batch input
4) END: Not a Batch Input session
5) Simulate Background mode : session will be run in foreground. but similar to back grpund
you can see the documentation by placing the cursor on these and click f1.

Some doubts regarding sorcing cockpit in EBP

Hi all,
This is sankar bhatta , working in IBM . I am new to the EBP module. I got few doubts regarding the sourcing cockpit.
When a shopping cart comes to the sourcing cockpit of the purchaser. I mean in what cases??
i am listing some of the cases where i have doubts.
1) A user creates a SC , but he doesn't assign any vendors. in that case it comes to the sourcing cockpit of the Purchase . is it right??
2)A user created a shopping cart ( with more than one item) without vendor and it has gone to SOCO of purchaser . he has assigned the vendor and orders it. the PO is created in the Backend. now because of some reason ( for example the vendor is not able to supply the item ) the purchase deletes one item from the PO in EB. In this case is the SC comes again to SOCO of the Purchaser???
3) the user created the SC without vendor.The SC goes to the SOCO of the purchaser. The SC is in approval process. Now the user deletes one item and orders it again. In this case whether the SC goes to the SOCO again???
4) User created a SC ( with more than one item) and approval is over. PO is created in the backend. Now, if the user or somebody who has the authorisation deletes the item in SC , does the SC goes to the SOCO of the purchaser??
5)According to SAp standard functionallity, PO can be deleted only by one in purcasing organisation. Is this person person csn be a purchaser (or) some other person in the Purchasing organisation??
Please answer these questions and if you know any other case where a SC comes to the SOCO of the Purcher please include that also.
Thanks and regards
Sankar Rao Bhatta.

Hi Sankara,
The Sourcing cockpit is much more simple than that. Your questions show you'rre very confused in this.
There is only one customizing point used : SAP Reference IMG -> SAP Implementation Guide -> Supplier Relationship Management -> SRM Server -> Sourcing -> Define Sourcing for Product Categories
If Sourcing for Product Categories is not configured, the system creates purchase orders in the local scenario for all requirements; these are incomplete if the source of supply is missing. If you require additional control options, for example, the facility to control processing at product level, you can use the following BAdI: Define Execution of Sourcing.
The diferent options you have in the customizing point are:
-Sourcing is never carried out: This is the default setting. Enterprise Buyer does not transfer any items to the purchaser's sourcing application ¨C independent of the status of the shopping cart.
-Sourcing is always carried out: Enterprise Buyer transfers each item to Sourcing ¨C independent of the status of the shopping cart.
-Sourcing is carried out for items without a source of supply: Enterprise Buyer transfers all requirements that have multiple sources of supply of which none is assigned, or if there is no source of supply for the requirement, to Sourcing.
-Automatic requirement grouping; sourcing for items without assigned source of supply:
If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
-Automatic grouping; sourcing is never carried out: If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, an incomplete PO is created.
-Automatic bid invitation for items without a source of supply: Enterprise Buyer creates a bid invitation for all requirements that do not have any source of supply.
So for your questions:
1)depending on your customizing, this SC will lead to:
-Backend PR (classic scenario)
-Local incomplete PO (standalone or extended classic without soircing)
-Requirement in the Sourcing cockpit (if customized)
2)The modification of a PO will never change the initial document (SC and/or requirement), nothing 'comes back' into the sourcing cockpit
3)If you customized the sourcink cockpit, the SC line goes into it only after the approval process
4)This has nothing to do with the sourcing cockpit
5)The POs can be deleted by people who have correct authorizations (that is purchasers of the document purch. org. in standard). Be careful the POs cannot be deleted as soon as they have been edited (as of R/3).
Regards.
Vadim
PS: Please don't forget to reward points for helpful answers on your threads.

Doubts regarding WAN Network sizing formula parameters

Hi
We have used the following SAP document - Front end requirements for SAP Business solutions
We have some doubts regarding the formula. Sometime we have the feeling it does not address very well issues as user's concurrency, WAN Optimization and contingency. However, it might be only that we are not using correctly the formula, so we would like to confirm some information regarding the parameters.
C = X * N * D * 0.25
The parameters are as follows:
C: Bandwidth in kbps that is needed for the SAP GUI
X: Amount of data per dialog step in kilo bytes
N: Number of active users (independent of the number of sessions)
D: Average number of dialog steps per minute per user7
Numerical factor: ~0.25 = 8 (kb/kilo bytes ) * 1.25 (protocol overhead) * 1/60 (min/s) * safety factor
1.58 (response time, peak load, different technologies)
The number of active user is the average number of concurrent users (from the total number of users) which are using the network? Therefore, we should calculate first the concurrent users number?
Does any body knows what is the reasoning behind the Numerical Factor and the safety factor? It is a contingency factor? It is related with a network bandwidth contingency?
Has anyone apply WAN Optimization?
Has anyone apply any additional contingency measure additional to the safety factor?
Kind regards
Gonzalo Pérez-Prim

Hi Gonzalo,
As you said, the number of active users is the mean number of concurrent users, since idle users don't normally need bandwidth.
I think that safety factor is an estimated number provided by SAP engineers to increase the final amount, just in case you have different issues that could lead to a lower network transmission rate. As it's a general estimation, please take into account that the particular issues of your network can have some influence in the speed calculation.
Please take into account that maybe you want to switch the option "slow network connection" in SAPGUI, just to decrease the ammount of traffic between frontends and server.
Hope this helps
Best Regards
Francisco

Small doubts regarding devices and permissions

Hill all,
Continuing with my experiences with Oracle 11gR2 and Solaris 11, i came up with some "small" doubts regarding the permissions and owners of the devices to be used as ASM diskgroups. I was able to install Grid and the database, both 11.2.0.3.0, in a single-instance configuration, but i had a small issue when creatind the diskgroup for the database data (+DATA). I created 3 devices (VirtualBox) to be used in the +DATA dg, and gave the the "oracle:dba" owner, with the permission 660. My doubts are:
1) It wouldn't be more correct to make the owner of the device the user grid? (grid:dba)
2) The permission 660 to the devices is the correct, or recommended permission? It did work with this permission.
Thanks in advance.

It depends on the user and group that runs the ASM instance. It can be oracle/dba, but can also be a different user, e.g. grid/asmadmin
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CHDFAGJD
660 means rw. That should be ok. No other user/group than the ASM instance needs to access the devices.

Help needed regards the usage of STL.....with CC

Hi All,
I am relatively new to SOLARIS. I am trying to figure out the options for using the STL components in the project.
The project needs to be compiled with both CC ang g++, should support both SOLARIS and LINUX systems. That's why i am going for STL components rather than using the RW-Components of Tools.h++.
I have the following doubts regards the usage of STL.
CC provides the -library option to link the libraries we require.
The following is what i understood from the documentation:
No ( -library ) option provides - default libraries included -lCstd -lCrun -lm -lw -lcx -lc+
-library=iostream+ - libraries included -liostream -lCstd -lCrun -lm -lw -lcx -lc+
-library=iostream,no%Crun+ - libraries included -liostream -lCstd -lm -lw -lcx -lc+
-library=stlport4+ - libraries included -lstlport4 -lCrun -lm -lw -lcx -lc+
-library=iostream,no%Cstd+ - Invalid combination, some header files missing [[ *iostream, sstream* ]]
When we try to make a new project, which of the following is recommended?
#! - Use libCstd suppplied along with solaris package.
When solaris makes a new release, is it always guaranteed that project is compatible with new libCstd ? (Is there a backward compatibility?)
The STL components which can be used in the project are limited. i.e we can use only those that come along with libCstd.....right?
Might not be compatible with other c++ compilers. ( Not compatible with g++ ) Right?
#2 - Use libCStd along with libiostream
Can we use STL (supported by libCstd ) + Classic-iostreams and still have the backward-compatibility?
Compatible with other C++ compilers....provided care has been taken of the CC STL Specializations. ( Compatible with g++ ) Right?
#3 - Use stlport4. Is it stable and backward-compatible ?
We can exploit usage of STL to the maximum.
Is it guranteed that the project (using -library=stlport4 ) will be backward compatible ?
Can the SunStudio (ORACLE) organization gurantee that stlport will take care of the changes in the CPP standards ?
i.e Is it guranteed that STLPORT and SUN-STUDIO packages will always be in sync?
Among the above three which is preferred method to go ensuring stability and backward-compatibility.
Thanks in advance.
Cheers,
Sreekar
Edited by: 855323 on 20-Oct-2011 04:04
Edited by: 855323 on 20-Oct-2011 04:04
Edited by: 855323 on 20-Oct-2011 04:06

In general, you don't need any options to use the C++ Standard Library (which includes what is sometimes loosely called the "STL"). Consider this toy program:
// file vec.cc
#include <vector>
#include <iostream>
int main()
    std::vector<int> vi(10);
    vi[1] = 1;
    std::cout << "vi[1]=" << vi[1] << '\n';
}You can compile and run the program as either
CC vec.cc && a.out
g++ vec.cc && a.outWith CC, by default you get the original libCstd. You use the -library option to select STLport or (on or selected versions of Solaris) Apache stdcxx instead. With g++, you just get the g++ library libstdc++, which should be suitable for all purposes.
For a discussion of which library to select with CC, see this thread:
Differnce between LibCstd and LibStlport
The optional libiostream is provided to provide support for programs written for the very old version of iostreams that was provided with the original AT&T Cfront compiler in the 1980's and early 1990's. There is usually no reason to use this obsolete library with code written after 1998.
The Solaris libCstd.so.1 (and libCrun.so.1) is always compatible with various releases of Studio, with one caveat: Each Studio release specifies the minimum patch level of Solaris libraries that is required to run programs created by the compiler. Any newer version of the library is guaranteed to be compatible. Thus, it is always safe to update the library, and an update might be required when using binaries created by a newer compiler.
A version of the STLport library ships with the compiler. C++ binaries created by an older compiler that link to libstlport.so.1 should still work when linked into a program created by a newer compiler. Use of the static libstlport.a is generally not safe when mixing binary code from different compiler releases.
Binaries created by Studio CC in default mode are not compatible with binaries created by g++. Even if you can get a program to link, which is doubtful, the program is not likely to run correctly.
Studio CC does provide a g++ compatibility mode as follows:
On supported versions of Linux with Studio 12.2 (C++ 5.11).
On Solaris/x86 and supported versions of Linux with Studio 12.3 (C++ 5.12).
In this mode, CC uses the g++ headers and the g++ runtime libraries.
Refer to the -compat=g option in the C++ Users Guide for details.
We plan to support the new C++ Standard, C++11, in a future compiler release. Because the ABI (binary interface) used by the current compilers is not adequate to support all the new features in C++11, we expect binaries built in C++11 mode to be incompatible with binaries created by earlier compilers. None of the existing C++ support libraries will be used in C++11 mode. A new library that provides full C++11 support will be used instead. We expect the new compiler to continue to provide the current C++03 mode as an option, being source and binary compatible with our earlier compilers.
Edited by: Steve_Clamage on Oct 20, 2011 10:00 AM
Edited by: Steve_Clamage on Oct 20, 2011 1:29 PM

Doubts regarding the SDN BPM scenerio!

Similar Messages

Maybe you are looking for