Doubts while transporting objects into QA

Hi,
I has completed the Development and need to transport it to Quality.
Here i has written 4 UDFs based on the conditions on Mapping.
Could you please let me know while transporting the objects from DEV to QA ...shall i need to take extra care on UDFs.
Pls let me know the process if i really need to transport UDF's also into QA system.
Thanks & Regards,
Y.Raj.

Hi,
In addition to the functional implementation like mapping hard-coded values specfic to landscape, you must take an extra care on the following scenarios
1. If you are implementing any RFC look up - connection parameters may change
2. If you use value mapping - value group names may change
3. Enhanced receiver determination - receiver business system names may change
No extra care is needed if its a simple code that maps fields without expecting any runtime variations.
Thanks,
Karthik

Similar Messages

  • Issue while transporting objects

    Hello Guyz
    I am having problems while transporting transformations, DTPs and other objects in BI. We are using BI 7.0 by the way.
    The problem is, when I re-transport a few of these objects, I get 2 sets of transformations and DTPs instead of the new one overwriting the already existing one in Quality. Do we need to set 'Overwrite Property' on the transport or somewhere else before re-transporting objects from dev to (qa or prod).
    I have the same question regarding Process Chains: is there some type of 'Overwrite' property that we need to set before we re-transport a Process chain into Quality for a second time? Do we end up creating 2 PCs if we dont have this property ON??
    Please advise.
    Thanks.

    HI,
    You need to select all the options when importing the TR in qualtiy system.excpet the one which says leave the TR in the queue for later import.
    when importing requesting in STMS_IMPORT it will give you a pop up on how you want to import it.
    There are option for overwrite mode.
    Select all the option which says overwrite and then do the import.
    Thanks
    Ajeet

  • Error while transporting objects:Internal error during pvc call: Parameter

    Dear all,
    We are facing the following error while transporting the individual configuration objects from our PI development system.
    Export failed: Internal error during pvc call: Parameter versionSpecifier or version has the invalid value null .
    However, it works fine when the complete configuration scenario is transported.
    We tried to transport the objects with different user id's, even then the issue still exists.
    Any inputs to resolve this will be highly helpful.
    Thank you,
    Younus

    Hi Mohammed,
    Answer is inside this oss [Note 1554387 - Error during export from Integration Directory|https://service.sap.com/sap/support/notes/1554387]. In this oss note, solution is to apply a patch (just a patch, not a SP). as it's a litle sap bug...
    Note: your issue is also explained with picture in this one "1550549 - PI transport: Internal error during pvc call" (sorry for this one I cannot insert a link)
    regards
    Mickael
    Edited by: Mickael Huchet on Jan 26, 2012 2:50 PM

  • Source System mapping while transporting objects from Q to P

    Hi All,
    I have moved all my transports from BW DEV to Q twice with different source system mappings, say R3D to R3Q and again R3D to R3X, as I have to do testing from both the source systems.
    Now, I have to move all those transports to PROD and I found out that they will be moved from Q to P and not from DEV to P. In such case, what source system mapping should I maintain in P? Is that R3Q to R3P or R3R to R3P?
    Hope I am clear with my question. Please let me know if it is not clear.
    Thanks,
    RPK.

    Hi Nasiroddin,
    Itseems I am not clear with my question. Let me put it in another way.
    My BWQ is connected to two R/3 source systems, say R3Q and R3X where as my BWP is only connected to R3P. While transporting the requests from BWQ to BWP, I know that I have to maintain the source system mappings(Tools->Mapping of the source system names). Now I am in doubt about what mapping do I need to maintain(either R3Q->R3P or R3X->R3P)? Which source systems transfer rules etc.(all source system dependant objetcs) will be transported, either R3Q or R3X?
    Thanks,
    RPK.

  • Error while Transport objects from DEv to QA-File transport

    Hai Experts!
    While exporting objects from Dev to Quality using File Transport. it taking long time and no erro msg is thown and it is not getting end .Did any face this problem. Can any one help me to solve this.
    Regard's
    Preethi.

    Hai!
    Issue is solved.
    I try to export the Individual object -->Message mapping.
    While exporting i unchecked the Option With software component version Defenition.
    Now it is success. Thanks all replies.
    Regard's
    Preethi.

  • Getting Error While Transporting object

    Hi Experts,
    While Releasing the Transport Request Im getting the Following error how can i resolve it,
    Not all objects in the request could be locked.
    Do you want to release them anyway?
    Awaiting for your replies.
    Thanks
    Vijay.R

    Hi,
    The following options can be tried:
    1)Try to transport the cube once again with option "before data Target" and manually collectinng all the objects.
    2)Transport the Update Rules once again
    3)Activate directly once again in Test system.
    Hope this helps.
    Venkat

  • Error while transporting objects using FIle system

    Hi All,
    I am getting the following error when I try to transport Repository or Directory objects from Development to quality.
    Internal error during pvc call: No space left on device.....
    But when I checked there is ample of space on the disk. Can anyone help me in resolving this issue.
    Also I am trying to set up CMS for PI7.0. Can someone please mail some good document or suitable links which can guide me for setting up the same.
    mail id [email protected]
    Regards
    Vinay

    Hi
    just to add
    Note :859465  addresses a different problem which is as follows. So I think it wont help here.
    Certain operations fail in DTR or in XI with a NullPointerException.
    regards
    krishna

  • Error while transporting objects from one package to another

    Hi Everyone,
    I am using a FM 'HR_INFOTYPE_OPERATION' to update a value into a table pa0584 table.
    If i try to upload all the values i am getting a return value like " No of Entries exceeds more than 20".
    So please help me out.
    Thanks
    Vijay

    Hi,
    You can merge your different requests into a single request. goto se09  select any one of your request and in menu,
    Utilities -> Reorganize -> Merge Requests. or press CTRL + F12.
    hope this helps u.,
    Thanks & Regards,
    Kiran

  • Error while transporting Datasources in Production

    Dear All,
    I have facing a problem while transporting objects pertaining to BI Cockpit in Production.
    Earlier I had transported all the obects (in more than one transports) in Quality (from Development). After testing the objects, I had imported the same number of transports (and in the same order) to Production and now some of the requests have ended in errors like:
    DataSource 0TCTWHMTFM_TEXT does not exist in source system PW1CLNT003 of version A
    Such errors have occured for most of the Datasources.
    Can anyone let me know
    1) Why the transports have failed while importing in Production when similar requests have been transported successfully to Quality.
    2) The possible solution to correct the error.
    Request your kind help to overcome this problem.
    Regards
    Shalabh

    Dear All,
    Thanks for your kind reply.
    There are no R/3 Datasources involved. Our BI Cockpit landscape is based upon only BI system. No data transfer to take place between R/3 and BI.
    Secondly, you mean to say that I need to replicate my Source system in Production and then proceed with the transporting of the requests from Dev to Prod.
    But I never did the same in Quality while transporting from Dev. Is it that it might have been done in Quality beforehand by someone ?
    Also, when the Datasources have not been transported to Production (resulting in error) then how can i replicate these datasources in Production ???
    Let me know if I have not understood correctly.
    Many thanks again for your efforts.
    /Shalabh

  • Error while transporting into qty

    dear all,
    Am facing the followingproblem
    while importing Developed  objects into qty,
    am facing the folowing error,
    am impoting Infoarea,infoabject catalog infoobject collected in one request
    datasource,Ipac, transformation ,DTP and its aplication component in ine request
    process cahin and query in another req
    in ECC qty all the datasourcesare imported suuceesully which i replicated and now all the extractors are in active in BI qty..i can get the data in rsa3.
    in Bi while importing the first time ,am getting rc 8 error even all my infoobjects are imported successfully.
    even my objects and all(infoob,infocub,DSO,infosource,multiprovider pchain and query) in active but am getting following error,
       Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation Mode)
       Activation of Objects with Type DataStore Object
       InfoObject REBATE is not available in version A
       InfoObject REBATE is not available in version A
       InfoObject REBATE is not available in version A
    No rule exists
    Source RSDS /IRM/LIS_RM_IPCRASP D10CLNT730 does not exist
    Checking Transformation 07RWPZMURGYR4NOOESP84LMUF993OFUG
    No rule exists
    Source RSDS ZBI_FM_VISTEX D10CLNT730 does not exist
    Target ODSO /IRM/IP_DSO does not exist
    Checking Transformation 096YTZBE05RPV4XSTTC6ZOZ9O98JUDSN
    No rule exists
    Target CUBE /IRM/IP_CUB does not exist
    Checking Transformation 09HAVZLDPAD8VPWYFGTHZ5QYJAP2KW7A
    No rule exists
    Source RSDS /IRM/IPCRASP_ATTR D10CLNT730 does not exist
    Checking Transformation 0EG24KMMNN8FMYQT3OWP2PUKZQ6HMIFN
    No rule exists
    Transformation 0KXRJTIOY2M1H0JOJD1F8M1UF8U7KVPX is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_4O3IJQ7KMTO9KIX6TVOZNOEGN
    Transformation 0IRQPACYJ28A1K7TYDTWDHFPOZ9B88SN is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_4O3IJTMH27BLUJKDF8QG4JTX3
    Transformation 096YTZBE05RPV4XSTTC6ZOZ9O98JUDSN is inactive (cannot be executed)
    Error saving Data Transfer Process DTP_4O3IJU1U44J0VSN9QWV4ONRCN
    plz guide me how to solve
    Thanks in advance
    Edited by: gadhatharan thirunavukkarasu on Dec 14, 2011 2:40 PM

    Hi,
    Is that all the object that you trandfer are active ??
    i can see above showing Dev-clnt source sytem doesnt exist...
    Some time when u transport the transformation to targets system then u may have the two transformation there one active in Quality with Q- ECC source system and one inactive with dev-source system (i.e. the system from where your transported). There is nothing to worry in this case. Things like this do exist in prod as well.
    Thanks,
    Deepak
    Edited by: Deepak Machal on Dec 14, 2011 2:54 PM

  • Doubt regarding Transporting Design Objects

    Hi all,
    While transporting the design objects from DEV to QAS, iam doing in the following way
    1) i am doing transport Namespace wise individually and exported one by one.These all interfaces involved with IDOCs
    2) When i import into Quality Design, i am not able to see the  IDOCs under Imported Objects.
    How to proceed further??
    Regards

    Hello Arpil,
    Now to itroduce this SWC dependencies is too late for le, because we have UK & North America objects also.
    If i introduce this Dependencies concept now, i have to change for those UK & North America things too.
    Is there any other way for this??
    Importing the IDOC Definition again ???
    any how i have to change the Control record values in QAS system to point QAS control record detail
    Regards

  • Error while transporting database index into quality system

    Hello,
    I am getting an error while transporting a new index in quality system.
    I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
    While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
    I retransported the objects using a new request. However I still got the same error.
    Please help.

    Navin,
    No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
    K.Kiran.

  • Error while Importing Integration kit  Transport Requets into SAP ECC 5.0

    HI ,
    1.  AT BO side -> I can see the many roles, but under 'role import tab'  in CMC  when i add any 'role' and click on update button,
         system showing an  error as below .
       "Failed while trying to get user list using class CSecRfcRemoteUsersActGrp in method CSecSAPR3Binding::GetUsersInternal(). Error code: 3. Description: Syntax error in program /CRYSTAL/SAPLSECURITY .. "
    2. After successfull installation of integration kit on windows 2008 server, i have imported the transport request into SAP ECC    
       5.0 When i  imported open sql connectivity transport request, i got error mesage . The error message number is 8 and it came
      for Generation of programs and screens. i have installed sap gui 710 ( verion : 7100.1.0.1027).
      I also transported remaining transport request (infoset, row level, cluster definition, security functions) but all these request
      contain similar error. Now when i try to login into sap  its going dump.Is there any possibility of reverting back the transport
      requests.
      Pls help me to fix these issues.
    Edited by: sheshikanth reddy on Apr 14, 2010 2:15 AM

    Hi ingo,
    Now i can able to transport successfully after following the order.
    Thank you very much
    Edited by: sheshikanth reddy on Apr 14, 2010 11:46 PM
    Earlier i have imported non unicode request numbers into sap unicode system.
    tats why i got error.
    Now i have imported unicode request number to unicode sap system with sequence.
    Edited by: sheshikanth reddy on Apr 15, 2010 12:19 AM

  • Error while Importing SYSTEM objects into 9.2.0.6

    HI,
    I got the following error while importing data into 9.2.0.6 DB .
    It is related to a SYSTEM object.
    . importing SYSTEM's objects into SYSTEM
    IMP-00017: following statement failed with ORACLE error 2270:
    "ALTER TABLE "DEF$_CALLDEST" ADD CONSTRAINT "DEF$_CALL_DESTINATION" FOREIGN "
    "KEY ("DBLINK") REFERENCES "DEF$_DESTINATION" ("DBLINK") ENABLE NOVALIDATE"
    IMP-00003: ORACLE error 2270 encountered
    ORA-02270: no matching unique or primary key for this column-list
    Constarint exists on Composite Primary Key on the parent table.
    Can anybody help me out on this.
    Regards,
    Sumit Singh Chadha

    Hi,
    don't mentioning why are You importing SYSTEM objects, the error that You have, just looking the message, is due to an export done without the clause CONSISTENT=Y (so all relations parent/child preserved) having the replication (the table in error is one of the replication dictionary table) active (not quisced)
    Repeat the export operation using CONSISTENT=Y an stop replication activity.
    Hope this helps
    Max

  • While transporting the objects from dev to q or production what are the err

    Hi all,
    While transporting the objects from one system to another what are the errors we get?
    Thanks
    Kiran Kumar

    Hi Kiran,
    The purpose of the Forums is to help people with problems, not to "fish" for answers to what appear to be interview questions. There are many ways to become educated in SAP Administration, such as training classes and help documetnation. Please choose these avenues for your questions instead of making these kind of posts in the Forums.
    Best Regards,
    Matt

Maybe you are looking for