Dowloading 2.0.2 update but errors out about netwok timeout
This has me frustrated tried several times but cant get 2.0.2 down at all, so i downloaded from server, installed through Itunes using shift restore pointed to version 2.0.2 and it killed my phone, had to restore back to 2.0.1, after reading the glowing reports about 2.0.2 I don't think I will bother, apple must get there finger out and do it right, paying top dollar for 3G and GPS and it doesn't work properly, failing that the phone goes back.
Pirrett,
It sounds like your connection to the server had gone out while trying to download the update. With a lot of apple updates, there are a ton of people trying to access the same server, and it might cause issues like you had. I would try it again now, or perhaps soon, as it may fully work this time. If you're still not able to download, you might want to reset your network, or see if you can download it from another network, to make sure that is not the problem
Hope you get it figured out!
-cody
Similar Messages
-
Updater software errors out...help!!
Pc is not seeing my shuffle. It's just flashing amber all the time. I want to run the software updater but i get the following error while the Install Wizard is running. Right at the very end a box pops up and says Error 1335 The cabinet file Data1.cab required for this installation is corrupt and cannot be used. Abort Retry Ignore. All you can do is hit Abort and it then says
I've downloaded it 3 times just in case. No luck. So i'm dead in the water right now.Some links to check:
http://support.microsoft.com/default.aspx?scid=kb;EN-US;310353
Also refer to this post:
http://discussions.apple.com/thread.jspa?threadID=438121&tstart=0 -
U need to update my Photoshop CS5 to get new camera raw capabilities. When I click on update in photoshop, I get error messages for some of the file downloads.
pixelator1 wrote:
I want to thank both of you for your help and thoughts. Yes I am a hobbyist, and photography is not one of my biggest hobbies. The possibility of an O/S upgrade breaking CS5 prompts me to think of another solution that has often been on my mind: Adobe could offer an alternative pricing model for the cloud service where I would pay per use rather than a flat monthly fee. "Per use" could be a coarse granularity such as "per day", in which case it would easily translate into dollars and cents, and to minimize credit card transaction costs it could be accumulated and charged once per month. It might also work like a prepaid phone service. Alternatively, "per use" could be finely granulated, e.g. as cpu milliseconds, maybe with micro-payments transacted many times per day using something like bitcoin. Being able to weigh cost vs benefit of what one is planning to do in the next few minutes is a wonderful way to achieve confidence in ones planned action and satisfaction in money well spent, which all encourages more business. Of course, there should be an option to lock the user interface from updating when new features are added, but that should be easy if the software is well structured to isolate the interface from the underlying capabilities.
The forthcoming Photoshop that runs on Chrome/Chromebooks might be something that Adobe might "meter" out to potential clients but right now, it's beta, is Windows-only and one still needs a Creative Cloud sub to join. Can't be out of the realm of possibility though since there's no software to install; it runs right in Chrome. It'd be perfect for the "run and gun" types that need Photoshop quickly...provided one knows how to use Photoshop. -
Workbook funs from Disco Desktop but errors out in PLUS
Hi,
Let me start by saying that I read the previous thread on this topic from September 2008 but have not yet found a solution.
There is an existing report of Unpaid Invoices that uses folders from Accounts Payable (AP Payment Schedules, Invoices, Suppliers, Supplier Sites) and another custom folder to get another field.
I was asked to add another worksheet that has several of the fields from the first worksheet, and in addition, to add bank information.
I did not have the Bank Branches folder available, but I found that when I added the Bank Code from the Bank Accounts folder, I can then access fields from Bank Branches. This is what I did and it all works in DESKTOP.
When I went to check the report in PLUS (from where the users will be working) I could not open the report (in either worksheet) but got an error "Join configuration cannot be resolved. Reason: more than 1 of the detail folders uses non-aggregated items so attempt to open workbook failed."
In reference to the previous thread, both AggregationBehavior in DESKTOP and PLUS is defined as 1.
As to fan trap, I can check it in DESKTOP (disabled) , but I don't know how I can check it in PLUS because I can't get into the report.
Any help would be appreciated.
Thanks.
LeahHi Tamir,
Okay. Things are working now. When you had mentioned that a custom folder defined with a 1-1 join was a possible solution, I, once again, checked out what existed.
In Accounts Payable there exists a join between Bank Accounts and Bank Branches that is 1-1.
In our company's BA, there also exists a folder based on Bank Accounts and another one based on Bank Branches. The join is also 1-1 BUT the master is the Bank Branches rather than the Bank Accounts (which actually seems more logical to me).
What I did was to join our company's Bank Branches (as Master) with Accounts Payable's Bank Accounts (as Detail) and everything works.
Of course I would never change the already existing join in Accounts Payable although I don't really understand the choice of master-detail. I'm sure there was a reason for the decision at the time.
Thank you very, very much.
Leah -
Webutil runs in my Dev env but errors out in my Prod env
I have the Webutil demo working fine in my Dev environment, but I keep getting errors in my production environment. Here is the output from the java console.
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainInvalidErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache https://NHR.sec.navy.mil/forms/java/frmwebutil.jar
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainInvalidErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache https://NHR.sec.navy.mil/forms/java/frmall_jinit.jar
java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainInvalidErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at oracle.jre.protocol.jar.HttpUtils.followRedirects(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.download(Unknown Source)
at oracle.jre.protocol.jar.JarCache$CachedJarLoader.load(Unknown Source)
at oracle.jre.protocol.jar.JarCache.get(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.connect(Unknown Source)
at oracle.jre.protocol.jar.CachedJarURLConnection.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.getJarFile(Unknown Source)
at sun.misc.URLClassPath$JarLoader.<init>(Unknown Source)
at sun.misc.URLClassPath$2.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getLoader(Unknown Source)
at sun.misc.URLClassPath.getResource(Unknown Source)
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
WARNING: Unable to cache https://NHR.sec.navy.mil/forms/java/jacob.jar
load: class oracle.forms.webutil.common.RegisterWebUtil not found.
java.lang.ClassNotFoundException: java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainInvalidErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
load: class oracle.forms.engine.Main not found.
java.lang.ClassNotFoundException: java.io.IOException: javax.net.ssl.SSLException: SSL handshake failed: X509CertChainInvalidErr
at oracle.security.ssl.OracleSSLSocketImpl.startHandshake(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.net.www.http.HttpClient.<init>(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.<init>(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsClient.New(Unknown Source)
at oracle.jinitiator.protocol.https.HttpsURLConnection$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at oracle.jinitiator.protocol.https.HttpsURLConnection.connect(Unknown Source)
at sun.plugin.protocol.jdk12.http.HttpURLConnection.getInputStream(Unknown Source)
at java.net.HttpURLConnection.getResponseCode(Unknown Source)
at sun.applet.AppletClassLoader.getBytes(Unknown Source)
at sun.applet.AppletClassLoader.access$100(Unknown Source)
at sun.applet.AppletClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at sun.applet.AppletClassLoader.findClass(Unknown Source)
at sun.plugin.security.PluginClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.applet.AppletClassLoader.loadCode(Unknown Source)
at sun.applet.AppletPanel.createApplet(Unknown Source)
at sun.plugin.AppletViewer.createApplet(Unknown Source)
at sun.applet.AppletPanel.runLoader(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)You get the same error for all jar-files, not only for the ones regarding WEBUTIL. Does any form run with the specified config-section you use for webutil?
-
Trigger compiles but errors out during execution
You guys wouldn't like this. Its about a trigger !
Below is a trigger i've found in OTN. I've a similair requirement. The below trigger will compile . But, during execution i get
ORA-00936: missing expression during executionI have this feeling that the last line in the INSERT statment is causing the issue.
create or replace trigger trg_test
before insert or update on central_dtls.emp_config
for each row
declare
v_schema varchar2(100);
v_sql_stat varchar2(32767);
begin
select schema_name into v_schema from central_dtls.master_config where company_id= :new.id;
v_sql := 'insert into ' ||v_schema||'..emp_config_local
company_id,
values
||:new.col1||', '
||:new.col2||', '
||:new.lastcol|| ')'; ----- Potential issue in this line
exception
when others then ......;
end;
/I've tried the below things.
||:new.lastcol ');'; --- Trigger Will not compile
||:new.lastcol|| ')'; --- Trigger Will compile , but, will get "ORA-00936: missing expression" during execution
||:new.lastcol|| ');'; --- Trigger Will compile , but, will get "ORA-00936: missing expression" during executionYou have:
v_sql := 'insert into ' ||v_schema||'..emp_config_local Try with:
v_sql := 'insert into ' ||v_schema||'.emp_config_local (only one dot between schema and table name :) ) -
BI 7.0 Installed but errored out during DDIC password check !!!!!!!
Guyz,
i installed nw04s system with AS ABAPBI JAVAEP+EPC on MS SQL server ....its IDES software btw...
everything went fine till 'Import ABAP' and even 'Running ABAP Reports' proces.... but while running the process 'Check DDIC Password', it popped a window with OK and Cancel saying that
test logon to SAP system SID failed .Make sure that the system is started that the user DDIC exists and the password of user DDCI is correct
I dont udnerstand why it would fail to logon to DDIC on client 000.... becoz i set the master password and SAPInst should remember the password in some encrypted form and use the same for logging .!!!!
anyways after this error, i started SAPMMC and logged into the system and tried DDIC in 000, 001 with master password and default password (19920706) as well with no luck...but worked fine in client 800 with my master password....
What should i do now ? any suggestions would be highly appreciated....
ThanksActually SAPInst is trying to connect to client 001 with DDIC...so I deleted SAP* from 001 client in sqlplus and restarted the server and tried logging with ddic in 001 with my master password, PASS, pass, and even with 06071992 with no luck...
any other suggestions ?
Edited by: Kasu on Mar 27, 2008 5:18 PM -
I downloaded the new Itunes version. During installation, there was an error message that said no Mobile access. After installation, Itunes would not open. Gave an error message that a DLL file was not found. Removed itunes from computer and initiated new download. Same problem with new download. Still does not open. I'm stumped. I have over 30,000 files in itunes and use it every day HELP
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
I get a message that my network connection has timed out while trying to update my iPhone on iTunes. Has anyone else had that problem and if so what solutions have you found? I was told to turn off my firewall and/or virus protection while updating but am nervous about doing that for obvious reasons. I'm also disgusted with Apple not providing free tech support.
See this article about the ports that have to be open during the update process. iTunes has to contact Apple during the download. iTunes for Windows: Troubleshooting security software issues
-
Execute custom SQL in DB Adpater errors out in Production - urgent please.
Hi,
I get this error when running the process in PROD at invoking delete operation that I'm doing by selecting the execute custom SQL option while defining the DB adapter. It worked fine in TEST environment but errors out in PROD env.
Any suggestions on why? Its urgent.
Thanks
-Prapoorna
The state of this instance is Faulted
<messages><input><InvokeDelete_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="DeleteDataInput_msg"><DeleteDataInput xmlns="http://xmlns.oracle.com/pcbpel/adapter/db/DeleteData"/>
</part></InvokeDelete_InputVariable></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="code"><code>17410</code>
</part><part name="summary"><summary>file:/prod/app/bpel/as/bpel/domains/verint/tmp/.bpel_SynchOTLLoad_1.0_0259c5f142631959ec0fb067d23fe98e.tmp/DeleteData.wsdl [ DeleteData_ptt::DeleteData(DeleteDataInput_msg) ] - WSIF JCA Execute of operation 'DeleteData' failed due to: Pure SQL Exception.
Pure SQL Execute of delete from xxhxc_timeattend_to_otl where report_date >= TRUNC(ADD_MONTHS(sysdate, -1),'MM') failed. Caused by java.sql.SQLException: No more data to read from socket.
; nested exception is:
ORABPEL-11633
Pure SQL Exception.
Pure SQL Execute of delete from xxhxc_timeattend_to_otl where report_date >= TRUNC(ADD_MONTHS(sysdate, -1),'MM') failed. Caused by java.sql.SQLException: No more data to read from socket.
The Pure SQL option is for border use cases only and provides simple yet minimal functionality. Possibly try the "Perform an operation on a table" option instead.
</summary>
</part><part name="detail"><detail>No more data to read from socket</detail>
</part></remoteFault></fault></messages>Looks like in production you have much more data than you do in your test environments.
It could be something wrong with your rollback segments. Is there any other activity happening when this is running?
What happens when you run this command inside SQLPlus?
cheers
James -
Embedding a report designer query into a template - errors out
In a template i want to include the report designer query, with the web item type - report, when i drag the report item into the template and try to edit it, it takes me to the report designer, there I'm able to open my report designer query - then when i go to - menu - transfer to web apllication designer - it takes me back to WAD but errors out saying it encountered a problem. Did anyone come across this issue? And how did you overcoem this? Any help or pointer would be appreciated and rewarded.
Please find the error log below:
3:45:25 PM.686 ########## END ##########
3:45:25 PM.686 ########## --> com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:45:25 PM.686: For Info: WAD Start. Revision: 7005.5.1100.277
GetSystemInformation
SUNI Const: 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 1)): 1.602272
CommunicationFactory.GetSystemInformation (Setting Conn 2)): 7.110082
CommunicationFactory.GetSystemInformation (Setting init Propties)): 7.110082
CommunicationFactory.GetSystemInformation (SUNI.FUNCTION_EXISTS)): 7.710934
RSR_XLS_RFCtrc: 8.51207
CommunicationFactory.GetSystemInformation (RSR_XLS_NET_INTERFACE)): 18.02556
CommunicationFactory.GetSystemInformation (XML Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Prop Stuff)): 20.0284
CommunicationFactory.GetSystemInformation (Version)): 20.0284
CommunicationFactory.ObtainSystemInformationandCheckVersion (GetSysInfo)): 20.128542
BExTextPool.New1: 0.300426
BExTextPool.New2: 0.400568
BExTextPool.New3: 0.400568
BExTextPool.New2: 0.400568
CommunicationFactory.ObtainSystemInformationandCheckVersion (CheckAfterLogin)): 1.00142
CommunicationFactory.LogOnUsingComConnection (ObtainSystemInfo)): 21.129962
CommunicationFactory.LogOnUsingComConnection (MainConnectionChangedEvent)): 0
CommunicationFactory.LogOn: 21.730814
3:45:41 PM.458: Connected. System: BID
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
RSR_XLS_RFCtrc: 0.700994
BExThemes.LoadFromBackend: 2.50355
BExThemes.LoadFromBackend: 0
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
<?xml version="1.0" encoding="utf-16"?>
<I_T_SEARCH_ATTR xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" />
BExThemes.LoadFromBackend: 0
Vert
BExThemes.LoadFromBackend: 0
3:47:41 PM.198 ########## END com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main ##########
3:47:41 PM.198 ########## --> com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem ##########
-EXCEPTION-START- 3:47:41 PM.198: External exception in Report Designer (execution) ---
Exception Message: Specified cast is not valid.
Exception at com.sap.bi.et.ReportDesigner.RDbReportDesigner.getCookies()
at com.sap.bi.et.ReportDesigner.RDbReportDesigner.RunFromWAD()
at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement iItemTagNode, XmlElement iLibItemTagNode, IWADHostServicesProvider iServicesProvider, Boolean iIsLibItem)
Full Stack:
at com.sap.bi.et.wad.Debug.WriteTraceToFile(Level, String, Exception)
at com.sap.bi.et.wad.Trace.Exception(Exception, String)
at com.sap.bi.et.wad.RDHost.WADRDHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
at com.sap.bi.et.wad.rdcontrolhost.WADHostFactory.MaintainItem(XmlElement, XmlElement, IWADHostServicesProvider, Boolean)
at com.sap.bi.et.wad.wiz.WADsF4GUIServices.CallCustomItemDialog(XmlElement, Form)
at com.sap.bi.et.wad.man.WADfrmMainWindow.mnuCTXTEditTagCustom_Click(Object, EventArgs)
at System.Windows.Forms.MenuItem.OnClick(EventArgs)
at System.Windows.Forms.MenuItemData.Execute()
at System.Windows.Forms.Command.Invoke()
at System.Windows.Forms.Control.WmCommand(Message&)
at System.Windows.Forms.Control.WndProc(Message&)
at System.Windows.Forms.ScrollableControl.WndProc(Message&)
at System.Windows.Forms.ContainerControl.WndProc(Message&)
at System.Windows.Forms.Form.WndProc(Message&)
at System.Windows.Forms.ControlNativeWindow.OnMessage(Message&)
at System.Windows.Forms.ControlNativeWindow.WndProc(Message&)
at System.Windows.Forms.NativeWindow.Callback(IntPtr, Int32, IntPtr, IntPtr)
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&)
at System.Windows.Forms.ComponentManager.System.Windows.Forms.UnsafeNativeMethods+IMsoComponentManager.FPushMessageLoop(Int32, Int32, Int32)
at System.Windows.Forms.ThreadContext.RunMessageLoopInner(Int32, ApplicationContext)
at System.Windows.Forms.ThreadContext.RunMessageLoop(Int32, ApplicationContext)
at System.Windows.Forms.Application.Run(Form)
at com.sap.bi.et.wad.BexWebApplicationDesigner.Launch.Main()
-EXCEPTION-END----Hi Voodi,
I have the same problem too. Worked fine in SP 9 . Now we are in SP11 with FEP also in SP11 revision 277.Did you resolve the issue if so how?
Thanks,
Karthik -
I am running Acrobat X Pro on Windows 7 in Parallels. I have tried to install the Acrobat updates, but they won't install. Today I tried to create a pdf from a Word 2013 document and it crapped out. I tried to uninstall Acrobat and got Error 1310. Error writing to file: c:\Config.Msi\feea.rbf. What do I do?
Hi Beverly ,
Please refer to the following and see if this helps.
https://helpx.adobe.com/creative-suite/kb/error-1310-error-writing-file.html
Regards
Sukrit Dhingra -
I need to update my ARD admin from 3.6 to 3.7 but client is at 3.8 and it errors out. How do I work around this?
This is a concern amoung many corporate users. It's going to take somekind of policy change with apple.
Enterprise support:
Call enterprise support (866) 752-7753 to create a case ID number -
I keep getting updates for my itunes for 11.0.2 but it errors out.
I keep getting updates for my itunes for 11.0.2 but it errors out every time. Can you help.
You don't have to update to iOS 6.0.1. A few iOS 6 users have reported problems, but most have not. However, for my iPad 2 I'm waiting until iOS 6.1 is released. iOS 6 doesn't add that much for the iPad 2, and it subtracts YouTube and Google Maps apps.
Cheers, Tom -
My iPad says it has to restore to update, but it will not. It is caught in a cycle of not being able to restore but needed to restore. I keep getting error code 3014 but I can not figure out what this means! nor can I do anything about it! So Frutrated!
Also...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work.
Maybe you are looking for
-
After installing snow leopard successfully I found out that my internal and external microphone does not work and I can't figure out how to fix it. Anybody have any ideas?
-
Firefox has to be reset every time I reopen it
Just went to Win 7 Home Premium x64. I set up Firefox with Google as home page and all the bookmarks transitioned. However, every time I reopen Firefox it comes up in Safe mode and I have to redo things to use it. I get a window with several blocks t
-
Hello guys, I have printed a pdf from a program, but it isn't editabl the thing is i don't know exactly what am i doing wrong, but I have realized that some pdf's when u right click on them u get the option to insert text at cursor. while other's don
-
PO Workflow for sending mails to outlook
Hi Guys, When a PO is created or changed it will send a notification to the default inbox in ECC as the workflow is being triggered, I need some information like if the workflow is triggered it will send mails to 5 different persons on there outlook.
-
IOS App Crash on regular basis
Hi I have an APP(Mobitest Agent) which does performance testing Mobile based Web. It is an APP which should run continuously on a Mobile Device to Run Performance Tests. We have a lab where we set this up. This APP works fine for some hours some