Dowloading Many Podcasts at once
Is there way of seleceting many podcasts and using the get command for all of them at once?
iPod Windows XP
Refresh works once one has subcribed and "Got" all the episodes that one wants. It does not apply when one first subscribes.
At that point in time, one has to use the GET button for every single episode (Zencast for example means having to press the Get button over 100 times).
My question refers to the first time that one subscribes and want to download all back episodes.
iPod Windows XP
Similar Messages
-
How do I change permissions on many files at once?
Hello!
I recently had a large hard drive crash, and, long story short, I got all my data back but now have a different user account on a new hard drive. The permissions on all the files on the computer are fine.
However, I am a recently graduated film student and use an external drive to edit video. When I tried to open up Final Cut Pro and work on a project, I was told that the program couldn't work because I didn't have "write" access to my scratch drives. I changed the permissions on the relevant folders and can now open the application fine, but can't actually edit because ALL the medi files don't give me full read/write access.
I can change them all one at a time, which requires I enter my password for each one, but this would take a few days of work to complete.
My question is: how can I add my user account with read/write permission to many files at once? I've heard this can be done with Terminal, but I'm not sure how.
Please give me step-by-step instructions if you can! I have never used Terminal before! I am not a techie, but I want to be, and I learn quickly!
My computer specs:
15in Macbook Pro, early 2008.
System 10.5.8In the Finder's Get Info window, under permissions, you can click the little gear icon and set the "Apply to encoded items" flag. Then when you change permissions, it will apply to everything underneath the selected folder.
-
When I upgraded the software on my ipod touch4, many podcasts were deleted from itunes. Of course, when I synced the ipod, they were deleted from the ipod as well. Apparently the current version of itunes will not let me go back to these earlier episodes (just a few months), in a podcast that I have been subscribed to, and re-download them. Is there a way to do that? and, how can I prevent this from happening again?
Hey! I had the same problem you did just today when I was trying to get my second iPhone to sync. What you need to do with music or anything extra that you doing you have to creat a second playlist or picture or anything that you would like to use, so that you can add to the second device that you are going to be using. I am not sure if that will help but it helped me out a lot!! Good luck!
-
help, tryed to down load to many Apps at once, ipad froze. dealeted Apps, no longer got internet connection. help
What's your problem is 1) your ipad froze or 2) you now have no internet connection?
Have you restarted/reset your device?
http://support.apple.com/kb/HT1430
https://discussions.apple.com/message/19521062#19521062 -
I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore. I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module. But this cannot be used to apply the preset to multiple images. For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected. This worked well for me in my workflow. But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC. ManiacJoe's solution above works - but it's accessed from the Library module. That's kind of counter intuitive. I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module. it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images. Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems. -
Export of many Baselines at once
Hello guys,
i want to export many Baselines from one repository user to other one. Is there a possibility to use the commandline for this job? How? Or is there an other possibility to export many BASELINES at once?
I use DB 9.2.0.7 withs OEM 9.2.0
thanks for responseHi,
There is no other way, you have to save it one by one manually.
Regards,
Kams -
LK6.5 Modbus read/write to many addresses at once
LK6.5 Modbus read/write to many addresses at once. What happens as example; I have address 100 to 150 and 180-200. Addresses in between doesn't exist. Not all are connected. The modbus (Ethernet master) driver reads in a single command (in order to optimize) address 100-190.
That is a nice feature, but the result is a reply like "not existing" because between 150-180 are not existing. No error is shown in lookout (communication works OK).
I know I can do a workaround by setting maximum value per message to 1 or 2, but the project has 140 modbus objects with a total of around 4000 connections. I would like to use a big range in one command, but no addresses that are not existing. Beside of that, it looks like this is a problem that let the driver and/or lookout crash.
Any one knows a fast solution? Is there another updated modbus driver?more inputs:
The response from Modbus device actually doesn't specify which address has the problem if you read a range.
When you read a range, and a certain address in this range doesn't exist, do you get no data in lookout?
It depends on the Modbus device whether lookout gets error response or the good response. I don't see detailed definition in the Modbus specification. So, if a certain address in a range doesn't exist, the device may either return error or good response. But the problem is that the error reponse is just an error code. Lookout doesn't know which address has the problem. It may be a problem that you don't see alarm in Lookout.
I don't see a way on lookout side to get a better behaviour. Maybe you can consult the device provider for any advice, such as what should the modbus master do, is the range read expected?
Ryan Shi
National Instruments -
Improvement: Delete many messages in once time
WHy aren't we able to remove many messages in once time. The only way we can do on latest iOS is to Delete one by one, it takes much time to do for all conversasion that we want to swipe out!!
Good question, but since this forum is user to user, I'm sure no one knows what Apple designs things exactly this certain way, so good luck getting an answer
Apple's feedback website may help you voice your concerns: http://www.apple.com/feedback/ -
Export / save many workbooks at once on local disk
Hello Experts,
we are working with BI 3.5 . My client wishes to save many workbooks of one role at once on his local disk.
He doesn't want to open every single workbook in the BExAnalyzer and save it on the local disk.
Is there a report or a transaction or something else to save many workbooks at once?
Thanks for your help.
Regards
FrederikeHi,
There is no other way, you have to save it one by one manually.
Regards,
Kams -
As of today, many podcasts no longer available on Apple TV. Why?
As of today, many podcasts no longer available on Apple TV. Why?
The offering list does not look any different to me. The 15 or so I have flagged are all still there. You would need to contact the pod caster and ask why they stopped distributing their pod cast via iTunes.
-
Is there a limit to how many Podcasts you can post to iTunes
I've been trying to post our most recent podcast to iTunes, and I haven't been able to. I've checked everything over and over and tried to repost, and have not been able to. I'm wondering if iTunes has a limit to how many podcasts you can post. Currently there are 83 podcasts that we' ve put up to iTunes. Each one is about 5-6 MB in size.
Does anyone know if I've reached my max and need to remove old podcasts to make space for the new one?
thanks. collintowneThanks for the info. You're right. I never thought about it. That's what the whole RSS feed is all about. Telling iTunes where to get the info it needs. So iTunes doesn't store the actual files. Got it!
I will try out that link you gave me. What I've been doing in the past to update my RSS/XML feed is just simply copy/paste the previous weeks info, update the new info, post it, and that's it. I never changed any of the information on the top part before you get to all the weekly posts. I did however for the first time attempt doing all of this on my Mac rather than use the PC that I have always done the Podcasts on and RSS feeds. So that must have caused a problem somewhere.
collintowne -
I have downloaded many podcasts but cannot get any to transfer to my iPod or iPad. I have followed all the directions and am getting nowhere. There has to be an easy way to download these to either device. Suggestions?
http://support.apple.com/kb/HT3281
Peace, Clyde -
How to switch off 'crop' edit in many images at once?
I know how to lift and stamp to apply edits to several selected images at once. However, if I have cropped many images within a project in different ways, then want to switch off the crop on all of them, is there a way? Without laboriously going through one-by-one and un-checking the 'crop' box?
Likewise is it possible to apply auto-exposure to many images (batch process)? When stamping, it applies the exact same exposure change from the lifted version, but different images require different exposure compensations of course.1 - yes, on one image leave the crop box checked and click the circular arrow (reset) ... this has the crop enabled but no crop ... then L&S that adjustment to all the ones you want, you just reset the crop on all of them ...
2 - no ... with the auto adjustment it creates an adjustment ... when you L&S that adjustment, that is what you get, that specific adjustment ... you are one of hundreds that want that and ask for it here ... use the feedback menu option to send feedback to dev team ... or use http://www.apple.com/feedback/aperture.html -
Can't save too many pdfs at once, hitting memory limitation?
Hi,
I work for a publishing company and we use an Acrobat Pro plugin that lets you process hundreds of scanned pages at once in order to create a finished pdf ready to be printed to offset presses.
My problem is that if we scan at 600dpi or in color then we have to work in smaller sections because it seems that Acrobat hits a memory ceiling.
My workstation runs XP Pro and we have 4GB's of RAM and hundreds of GB's of available disk space. I've upped the VM and that doesn't help.
I was told by the plugin developer that the problem is that Acrobat isn't 64bit and can't take advantage of additional available memory.
So does anyone know if there's a possible workaround for this or if Acrobat 10 will be 64bit and resolve this issue?
Thanks,
MitchI have been having this problem the moment that I upgraded to Itunes 11.3 it was working previously fine on 11.2. I am running this on my Toshiba satellite running windows 8.1. Is this inherit to the 32bit limit that was mentioned or is this a huge bug that should have never made it into the final build? it seems to me that every-time there is a new update things go haywire. maybe this is a bad rush job due to the new phones coming out this fall but I would like to see a fix or i will downgrade back to the previous version. Right now I am editing out the podcast streams that have become outdated due to mevio shutting down so I hope that might stop some of the freezing when I delete.
-
Few Questions About Migrating Site & Editing Many Pages at Once
OK. First things first. My manager doesn't want me listing
our company name in this post since we are currently trying to get
out of our hosting contract and she doesn't want to jeapordize
anything in case someone stumbled across the post by a search or
anything. FYI: I have Dreamweaver CS3.
So here's the deal. My company would like to move our site
away from this proprietary WYSIWYG online editor we have. The
current setup locks us into to this silly online editor for our
site and doesn't allow access to our files on their server. This
means that if I want to simply change the file name of a picture on
our site, I have to log in to their editor and go through about ten
stupid steps. The problem is, the site is dynamically generated.
Every page on the site looks something like this at the end:
default.aspx?pageid=9. Those links are permanently attached to
specific pages and the content on the individual pages rarely
changes. I tried using some offline downloaders to grab every page
of our site in case we move it elsewhere. When these pages are
downloaded, though, the file names change and it breaks all of the
links.
If I go into the code and change every individual link to
other pages and style sheets I can get it to look good.
So my first question is: is there a way to easily allow
Dreamweaver to import a couple hundred dynamically generated pages
and make them into static pages so that they just look like
"xyz.com/products.html"? Fortunately, our site is not extremely
large (maybe 250+ pages) so in an absolute worst case scenario I
could post a lot of the pages by hand.
My second question regards changing specific items across many
pages. Our current site contains the ability to place little
widgets into pages. This means that if we want a navigation bar on
a hundred different pages, we just edit the one entry for the
widget and every page changes. I'm sure this is possible in DW, but
I spent an hour trying to search online yesterday trying to find
info and didn't answer my question. Is this what templates are for?
I saw people mentioning Find All, but this didn't seem like a
perfect solution. I apologize if this is a very stupid question. No
one needs to take the time to explain the exact process to me, but
if someone could just tell me the name of the functionality and if
they know a specific resource to learn more about it, that would be
wonderful.
Whatever this functionality is, would I have to start over from
scratch with the pages? Or could I implement it with the current
site that's already put together? I'd be happy to convert the
site to static HTML if there's an easy way to change multiple pages
at once other than Find All and Replace.
Thank you so, so much for any help. I appreciate it. I just
want to make sure these things are possible before we start the
ball rolling down that path.I think I could answer your questions with just one answer so
here it goes.
What you need to do when making this type of mass move from
an online editor to DW would be to first download a copy of
everything you have just so you have a backup in case any mistakes
are made.
Next with the downloading of the files. You will need to log
in via FTP in Dreamweaver or via your file manager on the control
panel of your website. If you are unsure of where this is or how to
log in via FTP, you may need to contact your host for the login
information. Even though the files appear to be dynamic I do
believe that most editors would just store the pages separately and
just uses includes to make that work. However, if this is not how
it appears, post back with the name of the editor that you were
using.
Next, take one of the files you have. Based on the
description you are giving me it sounds as if they all look the
same just with different content (nav bar aside). If this is the
case you can create a template file in Dreamweaver. Within that
template you should place the content that is the same for all of
your pages. Then make one editable region for your content to go
into. These links can be found from the main toolbar for creating
editable regions and other template functions (which I believe
includes the navbar).
Also one thing to note with templates is that they will
automatically fix links on the pages when you save the template to
include new files via links. So you don't have to worry about
updating all of the pages all of the time. The only thing you would
need to update the individual pages for would be for the content on
those pages.
Hopefully this will get you started in the right direction.
But as I said in the beginning if you have trouble getting the
files off of the site post a bit more information about what you
have and hopefully someone here will be able to point you in the
right direction.
Maybe you are looking for
-
How to capture the current info in the top-of-page event in Reuse block dis
How to capture the current info in the top-of-page event in Reuse block dis
-
Purchased used G3 Vigor; SIM not recognized at all?
This is my first time ever using a wireless forum to ask a question, but I figure since it's a Sunday evening and all the stores are closed, it's worth a shot asking for advice here before tomorrow! Yesterday I bought a used LG G3 Vigor (model D725)
-
after installing camstudio i'm stuck with this. although my Firefox isn't disturbed i wanna rid it asap.help!
-
Pdf converter only makes thumbnail file
I'm working with Photoshop CS4 & Acrobat 8 and trying to create a pdf by using the Adobe pdf converter print driver. I print the PS file to the Adobe printer and many times only get a thumbnail file. Sometime I get a full size file - other times just
-
I don't have a preview tab in my Visual Composer storyboard. I also don't have a Debugger task panel. Can someone tell me how these options are activated? Thanks.