Down and menu button stopped workin !

Hi i was using my phone the other day and all of a sudden the menu button and down button stopped working ! i dont have a clue whats going on ! i have a n80, ive tried reinstalled my firmware but there seems to be a problem with the nokia updater it keeps saying network connection lost but i used it last night and the program worked prefectly ! Anyone got any idea's for why these 2 buttons would all of a sudden stop working?

Hi... i have an N80(1gb card)... its 20 months old...
i also have a very weird prblm.. wen ever i slide up or down the fone... the whole screen either goes completely white.. or completely blank.. for 3 secs.. and comes bak to normal...
my selections keys, directions keys... stop working.. and after lots of retries they start...
now my red button has completely stopped...
i thot its s/w issue.. formattd mem card...and reinstalled firmware.. but both prblms still persist...
tat button prblms may be coz of rust or dust below the keys.. but donno wats causing the whole screen to go white / blank wen slided up or down... will take it to nokia care.. hope they figure out sth..
if any1 knows the soln.. pls help...
thnx...
www.chandrubs.co.nr
http://www.youtube.com/Chandrubs
http://www.ChandruBS.co.nr

Similar Messages

Clickwheel/Menu buttons stopped working + ASP/Warranty question

Today, my year old 2nd gen nano's clickwheel and menu button stopped working. The hold button works, Itunes sees the thing, disconnecting the headphones does what it supposed to do and everything appears to be in order, except for the buttons. Neither resetting, nor restoring the software did resolve the issue and I am left with a small, elegant, brushed aluminium finished brick with music in it.
Luckily, an Apple ASP isn't particulary far from where I live and I could and probably should bring it there. However, I am currently in a country that is not the one I bought the Ipod in and my purchase receipt and anything else that might have came with it is some 3000 km away.
Does anyone know if bringing just the player to an ASP (it does have a serial number) has any remote chance of getting a warranty repair? And, if not, is it worth it even bothering with the repair, in terms of cost?

Hi Kevinsen and welcome to the BlackBerry Support Community Forums!
I would suggest performing a backup of your BlackBerry® smartphone then reloading the software as shown in the article below:
KB11320 - How to perform a clean reload of the BlackBerry Device Software using BlackBerry Desktop M...
or
KB19915 - How to perform a clean reload of BlackBerry smartphone application software using BlackBer...
Thanks
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

HT1320 Hello! My name is Ed. I'm having trouble with my Ipod classic, it keep freezing up on me and i can't unfreeze my Ipod. I hold down the menu button on the wheel and still won't do anything. All my Ipod classic do this. But my Ipod Touch, I don't hav

Hello, my name is Ed. I'm with all my Ipod, I have (4) they all keep freezing up on me when I play my devices. But my Ipod Touch I don't have this problem. On my classic I'll hold down menu botton on the wheel. But thing happen, I'm tired of letting battery go dead and recharge it, just to freeze up again. I made it work one time by holding down the menu button. That's about it. I need help.
Ed Shelton
PS I don't know operation system on my ipod classic, but on my mac book pro i am using (11.0.2) my mac os x (10.6.8). So, I try to take a quess at my os my classic

Holding down the center/select button and the menu button will reboot your ipod. See if that helps. Also, I'd recommend something else- I had nothing but trouble with my ipod classic until I spent $20 to get Mac OS Mountain Lion. It did what you said and sometimes wouldnt play, or wouldnt power on...
Try rebooting your ipod and let me know what happens and maybe in the future obtain Mountain Lion to aide your ipod in functionality.
Good luck!

HT201274 what should i do if i interrupted the erase all content process from my ipod i pressed sleep button and menu button for 10 seconds

please help here i just interrupted the process of erasing all content from my ipod it took almost 10 hours then i got worried from waiting i pressed both sleep button and menu button for 10 seconds while in process what should i do?

After charging the iPod for at least an hour try:
- Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Connect to computer and restore via iTunes
- Next see if placing the iPod in Recovery mode will allow a restore.
- Then try DFU mode and a restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Back and Menu Button

My back and menu button on my Galaxy S4 just randomly stopped working yesterday and haven't worked since. I've tried turning my phone off for a while and turning it back on, but still nothing. Everything else on the screen works except the back and menu button.Can anybody help with this?

diap225, YIKES! That seems to be very odd! I want to make sure all features of the phone are working correctly for you. When you had the device powered off did you also remove the battery? Once your battery is out can you please remove the sim card for a few seconds and then place the phone all back together again. Then go ahead and power the device back on. Once the device is up and running please test out your back and menu button again.
Was there any new applications that were downloaded when this started to happen? Is there any kind of physical or liquid damage to the device? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

I press the swtich off and menu button together, but still can't on and sync my phone! can anyone help me? please...

I was prepare to update the latest facebook app, but on the half way suddenly stuck... i can't press any button! i can only press the swtich off and menu button together for restart my phone, and of course turn into full black screen and the apple comes back again to the screen and for a really long time. I did try to sync to my laptop but it can't work, the apple stay there forever. Can someone help me?

OR RECOVERY MODE
Recovery Mode
1. turn off the iPhone.
2. connect the USB cable to the iphone.
3. press the home button (the large round), and press and hold connect the other end of the USB cable to your PC.
4. continue to hold pemuto the home button.
5. within about 8/10 seconds will appear on the screen of the phone USB cable + iTunes.
6. your iphone is now in recovery mode.
7. will open automatically iTunes you will detect an iPhone in recovery mode.
To return to normal mode you just hold the home button + shut down: the Apple logo in about 1 minute and the iphone will reboot.

What makes the Print Screen and End Buttons stop working?

I am 3 weeks into the trial period. Twice before, the Print Screen (manual capture) and End buttons stopped working. The only way I found to correct this is to uninstall and reinstall the application. Am I doing something wrong, or is this a bug?

More information on this issue: When I start recording in any mode, one screen is captured. No other screens are captured during execution on program functions, menu selection, navigation, etc. Once again I removed and re-installed the application. This time it made no difference.

My profile only- Brightness and volume buttons stop working (+)

I am having intermittent problems with my profile in OS X. It's the latest update, which I can't check (More on that in a minute).
At random intervals of more than one week, my MBP's brightness and volume buttons stop responding. As soon as I notice that, I try to open system prefs. One bounce on the dock, then nothing. Console: one bounce, then nothing. Terminal: same thing.
This only applies to Apple software, and only some Apple software. "About this mac" doesn't work. Same applies to Safari, Disk Utility, App Store, Activity Monitor, Quicktime, etc. Chrome, Firefox, Pandora, Adium, et al function normally. For some reason, iPhoto and Garageband do start and run normally.
I just tried restarting Finder (shift + Apple menu, selected 'Force quit Finder' with Finder in the foreground). Now Finder won't start. Spotlight runs, but you can't use it to open anything that won't open via the dock or Finder.
My trackpad settings have changed as well- it no longer recognizes 'tap to select'.
I tried logging into my 'safe' troubleshooting account (untouched settings, nothing installed). Everything works fine under the safe account; the only trouble I could spot was that the cursor wouldn't change from an unmoving pinwheel. I could still click on things, open apps, etc.
I'm 99% sure that a simple restart will cure everything but I'd like to solve the problem. It's kind of a big deal when my primary machine gorps up for no reason.
Thanks for any help you can provide.
-b

Thanks for writing back.
Here's another thing I found.
1/28/11 1:13:50 PM com.apple.launchd[1] (at.obdev.littlesnitchd[675]) Exited with exit code: 1
1/28/11 1:13:50 PM com.apple.launchd[1] (at.obdev.littlesnitchd) Throttling respawn: Will start in 10 seconds
1/28/11 1:14:00 PM com.apple.launchd[1] (at.obdev.littlesnitchd[681]) posix_spawn("/Library/Little Snitch/lsd", ...): No such file or directory
Apparently, part of an old install of Little Snitch persisted when I upgraded machines. The above example repeats itself over and over in my console messages, hundreds of times.
EDIT: I forgot to mention that I just did a clean uninstall using the latest Little Snitch installer- no more console messages about it.
And I found about 20 instances of this crash under /library/logs/diagnostic reports (all within the same 5-minute window)(also, /Library, not ~/Library):
Process: Finder [55244]
Path: /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
Identifier: Finder
Version: ??? (???)
Code Type: X86-64 (Native)
Parent Process: launchd [147]
Date/Time: 2011-01-28 12:43:23.213 -0600
OS Version: Mac OS X 10.6.6 (10J567)
Report Version: 6
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x000000011af59800
Crashed Thread: 3
The drive checks out OK, permissions check was unremarkable. Tons of drive space available.
Right now, all I can do is wait for the problem to happen again.
The 'stuck spinning cursor' problem that I ran into in my backup account went away after a reboot, as predicted.
-b
Message was edited by: Benjamin Riordan

My on/off button and volume buttons stopped working.

For no apparent reason, the on/off button and volume buttons stopped working. iPod touch 4th gen with 4.3.3 installed.

You can try a couple of things.
First a hard reboot: hold the sleep/wake and home button down until the unit shuts off and boots back up to the Apple screen.
Second restore the device py plugging it into iTunes and under the device summary screen click restore. You want to restore from backup to make sure all your info is synced back to the iPod at the end. Depending on how much stuff is on there this can take a while.
Thrid, take it to the Apple Store and have a Genius look at it. Depending you how bussy your local Apple store is you probably want to make a reservation first.

5th Gen iPOD has white screen and beeps when center and menu button is held

My ipod was perfectly fine until I downloaded iPod Updater 2006-01-10...now, my ipod has a white screen, won't turn off (white screen stays on) and when I hold the center and menu button down, it does a 3 syllable beep. I've done the switching the hold button back and forth; resetting my ipod; restarting my PC; un-installing and re-installing both the itunes software and the ipod updater and still no working ipod. I am atleast trying to restore it to factory settings, but, I get an error message on the iPod updater screen. Can anyone help? Thanks!

everybody listen to babara hall, genius, it takes a while but reset it one more time using menu and selct and while its off for a few seconds push selct and play/pause, hold it for a long while, then let go and you'll see the apple logo and everything will go back to the way it was before.
p.s. thank you so much, ipods working great now, glad someone knows what there doing instead of apple,lol

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

- Let the battery fully drain. After charging for at least an hour try here:
iOS: Not responding or does not turn on

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

My ipod has a black screen. I have tried to hold the sleep/off button and menu button at the same time with no luck. I connected to my computer and tried restore on itunes - still with a black screen a voice said "screen locked' code 542

Is the iPad charged? Plug it in with the charger/wall outlet for half an hour and try again to reboot by holding both the power and home buttons until the apple logo appears.

My sleep button and volume button stop working. what shall i do?

my sleep button and volume button stop working. what shall i do?

Try to restore "as new ipod" without using the latest backup, in case it contains corrupt data causing your problem. How to back up your data and set up as a new device

IPhone 4 home and lock button stopped working

I have an iPhone 4 and my home and lock button stopped working today randomly at the same time. I have had assistive touch set up for a while but that also won't work. Is there anything I can do to fix this?

I only got it Febuary/March this year.

Volume and Lock buttons stopped working after new iOS 4.3.3 update (ipod 4th gen)

After I updated my ipod with the iOS 4.3, the volume and lock buttons stopped working.
This has happened before and it'sprobably one of the most annoying problems ever.
The lock button tends to stop working but then works again only when it wants to, but the volume buttons dont work at all.
When the locked button worked again I turned it off and turned it on again, but it didnt fix the problem.
I've pretty much tried everything that I've read and nothing seems to work.
So now, I don't know what to do.
Should I take it to a random apple store or to where I bought it from?
It seems that it's happening to almost everyone, so at least I'm not the only one and maybe someone can help me out

If you have restored in iTunes on a computer and the problem remains then it's a hardware fault and it needs to be repaired. When you update the iOS version on an iOS device it checks the hardware components, this is when it'll detect un-diagnosed hardware faults and the components will stop working... even if they were working previously

Down and menu button stopped workin !

Similar Messages

Maybe you are looking for