Down convert from LabView 9.0 to 8.6

I would greatly appreciate it if someone could convert the attached file from LabView 9.0 to 8.6.
Thank you.
Solved!
Go to Solution.
Attachments:
Read_Value_From_Excel_LM6.vi ‏26 KB

Once again, saved in 8.0
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Read_Value_From_Excel_LM6_nijams.vi ‏36 KB

Similar Messages

  • Convert from LabVIEW 2011 to LabVIEW 9.0

    Please convert from LabVIEW 2011 to LabVIEW 9.0
    Attachments:
    Watlow Vis.zip ‏76 KB

    Looks like somebody forgot to attach the zip file.  Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Watflow.zip ‏57 KB

  • Converting from LabView 4.0 to 8.5

    I have a Pico Technology TC-08 thermocouple datalogger (RS232). It has drivers for Labview 4.0 but I use Labview 8.5, which says it can't convert the drivers. From the help pages I have understood that there is separate software that can convert from Labview 4.0 to 8.5. Can anyone tell me where I can download or otherwise obtain this software?

    Hi EKY,
    converted to LV7.1 - should be ok now
    But: there's a "missing dll"-error. You have to check this in LV8.5.
    There is also no guarantee the dll will work with LV8.5 or maybe new operating system (from Win95 to WinXP or Vista?)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome
    Attachments:
    TC081_LV71.LLB ‏29 KB

  • FM down converter in LabView. How?

    Hello NI Developers!
    I have Frequency Modulated (FM) Signal, with carrier frequency 1000Hz and message signal frequency 20Hz. I want to downconvert FM signal frequency to 200Hz. I searched through the forum and google and didn't find anything where would be at least algorithms or Math equations. How to downconvert FM signal?
    The aim is down convert signal to low frequencies where it is easier to filter from noise.
    Thank you in advance! 
    Solved!
    Go to Solution.

    Hello,
    You could try using the Scale Delta t VI (Functions >> Programming >> Waveform). As the help says, "Multiplies the delta t component of the waveform by the specified scale
    factor. Generally, this lengthens or shortens the sample rate of the
    waveform." 
    You could also take a look at the  Resample Waveforms (continuous) VI (Functions >> Signal Processing >> Waveform Conditioning. 
    I hope this helps.
    Vivek Nath
    National Instruments
    Applications Engineer
    Machine Vision

  • Converting from LabView 4.0 to 9.0

    I also need to convert this llb from LabVIEW 4.0; to 9.0. Anyone willing to do this for me? see attached and thanks...
    Attachments:
    gj18i.llb ‏247 KB

    Hey!! Could somebody help me?? I have an labview 2009 and it would be nice if somebody could convert these files (version 4.0.1)  for me! Thx
    Attachments:
    lgy1m.llb ‏73 KB

  • Convert from Labview 5.1 to labview8.6

    Hello Everyone,
    Can any one please convert this vi from labview 5.1 to labview 8.6 or labview 2009
    Thanks in advance
    Nadim
    [email protected]
    Attachments:
    4-Channel Power Spectrum with estimate.vi ‏750 KB

    Hi,
    Here it is in LV 8 but there are some VI's missing (DAQ)
    Kees
    Attachments:
    4-Channel Power Spectrum with estimate.vi ‏402 KB

  • Overscanning issue when down converting from 720p to PAL SD DVD

    Hi, I recently made a SD DVD in DVDSP, to be shown at an upcoming festival. Test screening the DVD, I noticed that the edges of the frame had been cropped on both top and bottom and sides - but not by very much. After checking the DVD on another computer as well as adjustimg the projector settings, the problem seems to have been at least in part inherent to the DVD itself and I am wondering why?
    The workflow I used was to edit in AIC in FCP, then write an uncompressed HD master (1280x720)- which was then run through After Effects to put the title sequence on (with the same settings), and then I used compressor to make a MPEG2 - tweaking the settings slightly from default. The end result was then imported to DVDSP, and written - with the resulting cropping problem.
    Any thoughts where I went wrong, and how I might get the rest of my picture back for screening purposes?
    Much obliged for any and all input,
    -Tom

    Thanks Harm...
    1. Don't uprez SD material.
    Not optional here...this is NTSC SD 4:3 legacy footage that is integral to the content...however there are many stills and animation of stills that can be created HD rez, then incorporate the SD footage at full rez as a scaled/vignette at 720x480/1440x1080i?
    2. Instead shoot HD, so get another camera.
    See above
    3. Second, lose the Matrox.
    Matrox seems to do a fairly descent job or down rezzing from 16:9 to 4:3 ...with Pan & Scan I could keyframe the scan and pan...any specific reason you have not to use RT.X2?
    4. Third, maybe forget about NTSC if you shot PAL. The time it takes and the inherent quality hit are not worth it, IMO
    All acquistion done in NTSC 4:3 DVCAM
    5. BR PAL does not support P.
    Ahhhh...thanks for that....I was not aware of this...i(interlaced only) in UK... eh? I'll research this further...both for UK broadcast and DVD home video
    Again...many thanks for taking the time to respond...anyone else?
    Best,
    Mick

  • Please Convert from LabView 2013 to 2011

    Hello, Could someone please convert these VIs from LV13 to 11 please?
    Thanks, 
    Laura
    Solved!
    Go to Solution.
    Attachments:
    Syringe Pumps New.zip ‏953 KB

    Here you go.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines
    Attachments:
    Syringe Pumps New.zip ‏364 KB

  • Convert from LabVIEW 5 to LabVIEW 2014

    hi,
    I could not open VI. Could you convert this vi to LabVIEW 2014
    Attachments:
    mslumsrs.vi ‏432 KB
    mslumsrs.vi ‏432 KB

    That's okay.  You can't.
    The message about the duplicate post is some forum housekeeping to save people's time responding to this message in the event the other message is already answered.  It just directs everyone to the first thread in case they stumble across this one first.

  • Errors with VI after down converting from 2009 to 8.x and porting from Windows to Linux

    Hi All,
    I'm pretty new to Labview so I've been trying to learn along the way. I've been tasked with porting a .VI that my supervisor developed on Windows to a Linux machine. The ultimate goal would be to build an executable that would be able to run on Linux based VMEs. The .VI was developed on Labview 2009 and the Linux machine has Labview 8.2. From what I understand I would need to downconvert the .VI in 2009 to be compatible with 8.2, then from there I would compile the .VI on 8.2 in Linux and create the executable.
    After having downconverted the .VI I tried to run the .VI to see if the program still worked/if any parts were broken. Unfortunately, it seems like after having downconverted and porting to Linux the program is unable to communicate over TCP/IP with the module that the program was designed to work with. My supervisor ran the debugging application where it showed the progress of the data as it travelled along the block diagram and it seems to break at the TCP write blocks.
    The error that I've recieved was Error 56 at TCP Read in WriteThenReadRegister.vi->E_LINAC_BPM_REV.1.0.vi
    Possible reasons: labview: the network operation exceeded the user-specified or system time limit.
    We've tested the connection outside of Labview and the Linux VME can definitely communicate with the module in xterm.
    Can anyone point me in the right direction to start trouble shooting this? 
    When I performed the downconvert operation I recieved a bunch of warnings that stated:
    C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\E_LINAC_BPM_Rev.1.0.vi (E_LINAC_BPM_Rev.1.0.vi)
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Multiply" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Divide" does not support output configuration in the previous version.
    The object "Boolean Array To Number" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Multiply" does not support output configuration in the previous version.
    The object "Boolean Array To Number" does not support output configuration in the previous version.
    The object "Boolean Array To Number" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    The object "Increment" does not support output configuration in the previous version.
    C:\BPM_Labview_Files\My_LabVIEW\New folder\E_LINAC_BPM_Rev.1.0 Folder\PowerScan.vi (PowerScan.vi)
    The object "Multiply" does not support output configuration in the previous version.
    The object "Multiply" does not support output configuration in the previous version.
    The object "Multiply" does not support output configuration in the previous version.
    The object "Multiply" does not support output configuration in the previous version.
    The object "Subtract" does not support output configuration in the previous version.
    Thanks in advance,
    Jason.

    I guess I should also post the .VIs in case someone could give some insight as to what's breaking.
    Again, I need to downconvert this from 2009 to 8.2 to run on a linux machine.
    In the mean time I'll be playing around with the "save as previous version" and the tool kit options.
    Thanks again in advance.
    Jason.
    Attachments:
    E_LINAC BPM 2009.zip ‏266 KB

  • Shutting down PC from LabVIEW

    In my application i want to shut down the PC Automatically when i press certain button provided on the user interface how can i achieve it.

    There isn't an independant one, so far as I know...but there may be.
    What you could do is use System Exec and the "ver" command, to get
    the version, and from there use the appropriate command.  Windows
    XP uses "shutdown -s", while for 2k it's a little more
    complicated.  See here.
    I've never had any experience with 2003 server myself, so I can't help you there.
    Message Edited by Novatron on 08-31-2005 08:19 AM

  • I need a vi converted from LabVIEW 9.0 to 8.6 or 7.1

    I have a few vis that need to be saved to an earlier version. These are in version 9.0 and I need them in 8.6 to open them. It would be better if I could get them in 7.1.
    Solved!
    Go to Solution.
    Attachments:
    Grab_continuously_new.vi ‏380 KB
    Mikrotron.llb ‏337 KB

    I converted them into 8.6, I was missing a few dependancies (mvfgi5.dll) so I just ignored them.
    Attachments:
    Grab_Continuously_New_86.zip ‏390 KB

  • Convert from LabView 6.1 to LabView 6.0

    Can anyone kindly save this VI's in 6.0 version. I do not have LV 6.1 and these VI's are written in LV 6.1 version.
    Thanks,
    Kishor
    [email protected]
    Attachments:
    High_Speed_Data_Logger.llb ‏154 KB

    It appears to be one of the example programs provided and as far as I know, it's there in 6.0 (it's a lot older than that I believe). From the help menu, select Find Examples and then go to Hardware Input and Output>DAQ>Solutions. High Speed Data Reader and High Speed Data Logger should both be there.

  • Downconver​t from Labview 8.0 to 7.1

    Hi!
    I need these files down-converted from Labview 8.0 to 7.1. Thanks in Advance!
    Solved!
    Go to Solution.
    Attachments:
    Fast_Scan_CV_8_0.zip ‏159 KB

    attached
    Attachments:
    Fast Scan CV 7.1.zip ‏149 KB

  • Need to convert to labview 11 from labview 12

    hello
    I need to convert the following Labview 12 VIs to Labview 11.
    thank you in advance
    Attachments:
    QAM Demodulation.vi ‏30 KB
    QAM Modulation.vi ‏30 KB
    rx QAM.vi ‏57 KB

    The conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

Maybe you are looking for

  • SAP EarlyWatch Alert in SAP ECC and SAP PI

    Hi Experts, Every week in SAP EarlyWatch Alert report in PI as well as SAP ECC, shows PI consuming highest resource in SAP ECC by the SAPMHTTP. Example as below: Initial System Initial Action Total Resp. Time in s % of RFC Load Avg. Response Time Avg

  • How to connect two monitors using macbook pro?

    Hi, I have a Macbook Pro through which I want to extend the displays to two individual monitors. The two monitors should show two different windows which is opened through my macbook. I have observed that macbook has only one mini display port throug

  • CRM service order - Follow on processing in ECC

    Dear Experts, We create a service order in CRM. It contains service items as well as spares in it. If I configure the same order type and item category in ECC, would this replicate as it does not at the moment. What needs to be done to make it reflec

  • When I click on text in a page, an I-bar appears where I click which then can be moved with the arrow keys, just like a Word document.

    I have reinstalled Firefox twice, each time downloading a new installer exe from the website. I have also updated all plug-ins. This is a continual problem, as this makes normal scrolling impossible because the arrow keys move the I bar.

  • Plot chart in this way

    Hi EveryOne, I need some help ,i want to get chart in this way , me not getting the idea how to do it. me giving the url please check it out . Thanks in avance. http://www.profiler.noaa.gov/npn/servlet/TimeSeriesServlet?beam=1&bgndColor=-w&blpprofile