Down graded from windows 8 to 7

hey
recently burned out my hard drive so i had to install a new harddrive and os on my laptop and only had windows 7 (32-bit) on hand. installed it but it is only saying 929 MB of RAM is useable. i had 8 GB before and even swtiched them out for 4 GB and still reads 929 MB useable. the drivers
Ethernet controller
PCI Device
SM Bus Controller
Universal Serial Bus (USB) Controller
are also missing. i tried downloading them from the website but no go.
any help?

Hi:
You can use all of the drivers and software from the dv6t-7000 except the BIOS and firmware files.
SM Bus Controller:  Install this first and reboot. That might fix the memory issue.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-102471-1&cc=us&dlc=en&lc=en​...
Ethernet controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-102459-1&cc=us&dlc=en&lc=en​...
PCI Device:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-102462-1&cc=us&dlc=en&lc=en​...
Universal Serial Bus (USB) Controller:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-103655-1&cc=us&dlc=en&lc=en​...
If after you install the above drivers you still have the memory issue, see if this is the problem.
Run 'msconfig', go to 'boot' tab, click 'advanced options', and untick 'maximum memory'.  After restarting, see if the memory issue is resolved.
If the box is already unchecked, then I won't be able to help you with that problem.

Similar Messages

  • Up graded from Windows XP to Windows 7

    I have Photoshop Elements and Photoshop Premier Elements.  I upgraded from Windows XP to Windows 7 and the programs are not compatible with the W-7.  Is there any way to run them on W-7 or is there an upgrade available without purchasing complete new programs?

    Hi BillFinn,
    Welcome to Adobe Forums.
    Which version of Premiere and Photoshop Elements are you using?
    Try to run the program in compatibility mode by right clicking on the application
    and then go to properties and choose compatibility tab and choose windows xp
    in there and try to launch the applications.
    Thanks

  • How to re-install Adobe Acrobat Standard 9, from disc, after up grading from windows xp to windows 7

    I installed windows 7 on an XP lap top using a clean install.  When trying to re-install Acrobat standard 9, the install wizard gets along for a bit then i get the following message "Error 2755. Server returned unexpected error 3 attempting to install package D:\Adobe Acrobat 9 Standard\AcroStan .msi"  I don't want to buy a new version because Standard 9 meets my needs well. 

    install using compatibility mode.

  • Black screen on reboot from windows to mac?

    Hello,
    A black screen is stalking me... I'd be much obliged if anyone can help.
    The problem:
    I have Windows 7 installed with Bootcamp. Every time I shut down / restart from  Windows  to get to the Mac side, the chime rings, but the screen stays black. I can tell the Mac is running though, because of the sound I hear when I press the volume up/down keys on the keyboard. Then, at some point (5 - 30 - 60 mins later) the computer decides out of nowhere it's time to unveil the desktop... This never happens when I reboot from the Mac side (unless I force shutdown while the black screen is still there).
    Things I tried that didn't work:
    - Command-Option-P-R to reset NVRAM (worked once but didn't fix it, and now when I try the screen stays black)
    - Resetting SMC
    - Apple Diagnostics came back with no issues found (when I restarted after the diagnostics, I got hit with the black screen again...)
    - Erasing the Windows partition and reinstalling it.
    Things I should probably mention:
    The mac is a late 2013 iMac, Intel Core i5 with NVIDIA GeForce GT 750M, running OSX 10.9.1
    I apologize if this has an obvious solution I somehow missed, or if it was answered in another post.
    Thanks for your time.

    One way is to wipe the iPod clean and use it as a hard drive to carry the files over to the new comptuer. You must format the iPod in what's called Fat32, the older formatting for DOS. If you do this on a Mac, you use the Disk Utility to Erase the disk, and you choose MS-DOS for the format.
    Then you plug in the iPod to the Mac, drag the iTunes Music folder to the iPod disk. Then you plug it into the Windows machine and drag the files to your iTunes folder there. See some instructions here:
    http://docs.info.apple.com/article.html?artnum=300173
    On the other hand, you might try using a 3rd party program that takes songs off the iPod. But Windows doesn't read the Mac files, I bet they won't help you move the music cross-platform.
    Hope this helps...

  • Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down.  The window will not close ever, just keeps spinning around...help!

    How can I stop the 'Adobe Reader Update' from constantly trying to download?  It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!

    Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously! 
    I did what  you said now and it has worked, thanks so very much for getting back to me.  I really appreciate your help!!
    Can I ask you questions in the future or do I just do that through the forum?\
    Thanks again, Jennie 
          From: Anubha Goel <[email protected]>
    To: rubyrose1950 <[email protected]>
    Sent: Sunday, April 26, 2015 10:42 PM
    Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
    |
    You have been mentioned
    by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you  Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha 
    Participate in the conversation by replying to this email
    To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

  • I have de-graded my system from Windows 8.1 to Windows 7,

     I have de-graded my system from Windows 8.1 to Windows 7, I'm unable to find drivers for this, can you please provide it  USB Mass Storage Device DriverUSB Composite Device DriverHigh Definition Audio Control DriverEthernet Controller DriverAMD Radeon HD 8210 DriverRealtek PCE Card Reader DriverPS2 Composite Device Driver  

    Hi: See if this graphics driver works... http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6709373&swItemId=ob_135683_1&swEnvOid=4063 Ethernet:  Download and install the second driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTypeID=3&GetDown=false Card reader:  Download and install the first driver on the list. http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownTypeID=3&GetDown=false Did you install the USB 3 drivers?  If not, here they are.  Install both and reboot. http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=4058 http://h20566.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=4058

  • Firefox 13.0.1 windows -problem resizing - restore down minimizes the window - same from commandline - can't resize

    firefox 13.0.1 on windows xp
    the window is always maximized - no possibility to resize anymore - restore down minimizes the window - also tried from command line and height.. window appears but immediately minimizes
    any idea ?

    Try:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/Troubleshooting+plugins
    See also:
    *http://kb.mozillazine.org/Corrupt_localstore.rdf
    You can check for problems caused by a recent Flash 11.3 update and possibly downgrade to Flash 11.2 or 10.3.
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *https://support.mozilla.org/kb/flash-113-crashes
    *http://blogs.adobe.com/asset/2012/06/inside-flash-player-protected-mode-for-firefox.html

  • Trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. I have use all the suggestion including unistall and reenstall a new down load from appl

    I'm trying to get my itunes to go back to english but is coming up Russian on windows 7. I initally installed English version and about 6 months ago it came back Russian. It was English for over 2 yrs. I have use all the suggestion including unistall and reenstall of a new down load from apple.

    I copied the iTunes file from the external drive and it's in both places.  I thought all I would need is the iTunes program (which I downloaded to new computer) and my iTunes library file.  There must be something else that's missing.  My iTunes library looks the same on the new computer as it does when I open it on the external drive.  If I click on an iTunes library song from my new computer, it will only play if I have the external drive plugged in.
    My back-up drive is a mess.  I have multiple copies of music, video, photo, and document files and I don't know how that happened. ={  Obviously, I don't know how to back up stuff properly and there are back-up files extending over a 6- to 8-year period.  I think all I did was just drag and drop the main folders from the back-up drive to the same main folders on the C: drive.  Also (and I'm kind of fuzzy on this) Windows used to automatically save music files in a folder within my document files (which makes no sense to me).  As my Jewish friends would say, "Oy Vey!" 

  • Help!! Down grade from 64 bit Vista to XP Pro x64 Edition

    I am in need of down grading because of driver issues for this equipment that I've purchased and it will not currently run on 64 bit Vista.  Can someone give me the simplest step by step way to make this happen?  I am not knowledgeable in this area so please keep it as ABC as posssible for me. 
    I have the HP Pavilion dv4 Notebook PC
    AMD Turion X2 Dual-Core Mobile RM-72 2.10 Ghz
    4.00 GB
    64 Bit Operating System
    Windows Vista Home PremiumService Pack 1
    This question was solved.
    View Solution.

    Hi,
    This is a guide for XP 32 bit version. I think then after this what Huffer wrote You will want to try this system.
    First make Vista backup. Here You've got all informations how to do it.
    You have a folder with drivers & programs that may prove very helpful after XP downgrade. Copy folder C:\Swsetup to DVD Before formatting your hdd.
    Now You need to slipstream Your Sata drivers win nLite.
    Here is guide how to do it and here are AMD SATA AHCI Controller for You. Just unrar this drivers with winrar.
    Be sure also that You are using WinXP SP2 version. If you haven't got SP2 version here you can download this service pack
    and here You have got guide how to slipstream this file with Your system again by nLite.
    In this program You can even burn Your new XP cd with this driver.
    Drivers for Your model:
    First You must install .Net Framework  here (You need it for Catalyst software and  HP Quick Launch Buttons)
    How to install HD 3200 Graphics/Video for XP
    For this video graphic, ATI do NOT release XP drivers due to some agreement with HP that backed by Microsoft.
    However, you may utilize Mobility Modder by driverheaven.net.
    Download these files
    1. Download MSXML 6.0 from Microsoft, here
    download msxml6_x86.msi --> 1.5MB
    2. Download Mobility Modder, here
    Do the following steps
    1. Please make sure you had install .Net Framework,
    2. Download newest desktop drivers, here
        Run Catalyst Software Suite but cancel the installation once the driver is extracted.
    3. Run Mobility Modder, browse to the driver in C:ATI/SUPPORT/xxxxx/ --> hit modify. Wait until driver is modified.
    4. Wait until Install is finished and reboot
    Further detail can be found in here
    MS-UAA for SP2 (required with a reboot before Audio, Modem and ATI HDMI Audio) here
    MS-UAA for SP3 (required with a reboot before Audio, Modem and ATI HDMI Audio) here
    Please check first this link written by Joshua Wood and concentrate in it on problems that may appear when You will be installing sound card. I know then this is guide for dv5 but many hardware and drivers are the same for both models.
    IDT High-Definition Audio CODEC Driver,
    1. sp41698, vista driver, reported work in XP here
    2. sp41693, vista driver, reported work in XP here
    3. sp39671, vista driver, reported works in XP here or here
    4. Find Your Vista audio driver on this DVD where You burned C:\Swsetup folder. It may also work under XP.
    When You will install any audio driver with success check is Your sound working.
    If there will be no sound after restart check this thread. There are informations how to solve this.
    High-Definition Audio (HDA) Modem Installer and Driver here
    ATI HDMI Audio here
    HP Quick Launch Buttons here
    Broadcom Wireless here
    Realtek RTL8102E Family PCI-E Fast Ethernet here
    ALPS Touchpad here
    JMB38X Card Reader  here
    ENE CIR Receiver (your Vista driver) here or from Intel here
    If you had for 7 unknown devices (buttons drivers), here (New link)
    Do manual installation
    Go to device manager, right click unknown device,
    Choose to update driver, No to connect,
    Choose install from a list or specific location, Don't search, Have disk,
    Browse to the location of machine.inf.
    Do it for the rest of unknown devices.
    Message Edited by Daniel_Potyrala on 09-12-2009 03:51 PM
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Windows 7 x64 can't read/install any printer drivers from Windows Server 2003 x64 (AMD64 folder and HP Deskjet 855c)

    I read the thread Widows 7 printer
    HP deskjet 855c driver about possible installation of HP855c drivers onto Windows 7 x64 from "Windows Server 2003 x64" CD but I didn't have enough luck to succeed with doing it on my laptop. That thread appears to be dead now
    as it is marked "Answered", so I'm asking for help here. I have Toshiba Satellite P500 with Windows 7 Home Premium 64-bit (http://i55.tinypic.com/2zgth6v.jpg). 
    Let me tell you first that I don't have access to Windows Server 2003 x64 or XP Pro 64 CD's. However I did some research online, which eventually forced me to learn about the "file sharing". After extensive search I was able to get the copies
    of AMD64 folders from Windows Server 2003 R2 Standard x64 with SP2 and
    XP Pro 64. The reason that I went also after XP Pro was because I thought that the extra wording "R2 Standard x64 with SP2" in description of "Windows Server 2003" did not reflect the exact name provided by poster
    Alan. I couldn't find just "Windows Server 2003 x64" (does it matter?).
    Anyway, I followed first the drill with running "printui /s /t2" and disabling UAC, and then in both cases I was able to locate the
    NTPRINT.INF file (http://oi51.tinypic.com/9qwvt2.jpg - this image is from XP Pro AMD64 folder) but each time when I
    attempted to install the driver, I got the same message stating:
    "The folder you specified doesn't contain a compatible software drive for your device. If the folder contains the driver, make sure it's designed to work with Windows for x64-based systems." (http://oi53.tinypic.com/27yveiw.jpg)
    Why aren't there x64 drivers?
    During several installation attempts I had the printer connected to or disconnected from my laptop. It didn't make any difference. I must add that for this purpose I had to use different cable than the original one designated only for the
    Parallel port in my old desktop with Windows XP. My new laptop with Windows 7 x64 came only with 3 USB ports (plus 1 HDMI and 1 Serial). Because of that situation I bought in advance a new printer cable called “USB to 36-pin Parallel Port Adapter
    Cable” (http://www.amazon.com/gp/product/B003A8I75E). I'm not sure, if it will work until I can install the printer.
    Besides, nobody talked about this issue yet. I was also playing with the port choices in "Add printer" step; changing from default LPT1 to USB001 with the same negative results.
    I don't know what I'm doing wrong. I was very hopeful after reading positive "case closed" notes there.
    Can anyone help me here, maybe by making the necessary files available for download? I'm willing to pay for such assistance or make a donation, if necessary. Seriously. Judging by the large number of views of the original
    thread, one could assume that there is a potential demand for such service. It would be more human to pay few bucks for a few driver files than $900 for the whole Windows Server 2003 x64 CD, no? Can Microsoft accomodate me/us, please? :)
    Andrew*
    P.S. I was advised to come for help here from
    http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/windows-7-x64-cant-readinstall-any-printer-drivers/4e7d06e1-33a5-4597-be70-4fdc087a63a7?msgId=9a045994-0d31-4d40-b17d-dba372393ee4

    I have my HP 855c/driver working on Win 7 Ultimate x64. I used the 'printui /s' procedure and 4 files described above with some minor changes.
    I pulled WindowsServer2003.WindowsXP-KB914961-SP2-x64-ENU.exe down from the Microsoft website. Running the file causes the exe to unpack into a temp folder at the root drive. A 'Setup Error' message box is displayed once the file is run. I left this
    message box up until I copied ntprint.inf, ntprint.cat, and sp2.cab from the temp folder.
    I copied driver.cab from a Windows XP Pro disc. I also needed amd64\stdnames.gpd which was already in my Windows 7 c:\windows\system32\spool\drivers\x64\3 folder.  
    I created a folder with the 5 files (ntprint.inf, ntprint.cat, sp2.cab, driver.cab, and amd64\stdnames.gpd). This is my 'Have Disc' folder. 
    I followed the 'printui /s' instructions, first changing the permissions mentioned above and then installing the driver. Next I followed the instructions to add a printer from Control Panel 'Devices and Printers' - 'Add Printer', choosing to 'use an existing
    driver' when installing the HP 855c.
    I used a slightly different ntprint.inf, size 1570418. The readable contents of ntprint.inf is as follows. Notice the line 'CatalogFile=ntprint.cat' is not included. I tried using the 1570468 version of ntprint.inf; when I did I received an incompatibility
    message (probably the same one mentioned above).
    ; NTPRINT.INF (for Windows Server 2003 family)
    ; List of supported printers, manufacturers
    [Version]
    Signature="$Windows NT$"
    Provider=%MS%
    ; LayoutFile=layout.inf
    ClassGUID={4D36E979-E325-11CE-BFC1-08002BE10318}
    Class=Printer
    DriverVer=10/01/2002,5.2.3790.4533
    [ClassInstall32.NT]
    AddReg=printer_class_addreg
    [printer_class_addreg]
    HKR,,,,%PrinterClassName%
    HKR,,Icon,,"-4"
    HKR,,Installer32,,"ntprint.dll,ClassInstall32"
    HKR,,NoDisplayClass,,1
    HKR,,EnumPropPages32,,"printui.dll,PrinterPropPageProvider"
     Good luck

  • Can not reboot into OSX from Windows using Bootcamp assistant

    I'm having a bit of a problem with rebooting into OSX from Windows on bootcamp. Clicking on the icon in the system tray produces a message that Windows can not find the OSX disk. Trying to open the Bootcamp preferences also generates an error. I have no problem getting back into OSX if I shut down Windows and restart the MacPro while holding down the option key. This is with a Windows 7 install on Bootcamp, but I had the same issue with a previous install of Win XP. I nuked and paved OSX and the WIndows disk between installs so my current problem is not carry over from the XP install.

    My bad I should have been more clear. The problem is actually with a XP install via bootcamp, my Win 7 install is in VM Ware Fusion.
    The XP install is on a second drive. Since you asked about this I'm assuming it may be the reason Im having problems.
    The error is I get when trying to access bootcamp via the Windows control panel or by right clicking the sys tray icon is - "An error occured while trying to access the start up disk settings. You may not have privileges ...blah, blah, blah. I only created one account and I have enough privliges to change admin stuff in windows so I cant see privliges being the issue. I reassigned the OSX partition a new drive letter and rebooted windows but this didn't help.
    The only drivers I installed, other then updating the video driver, are the bootcamp drivers
    Sys tray icon - small diamond shapped icon in systray for accessing bootcamp functions.

  • Downgrading from windows 8.1 single language to windows 8

    Hi, i want to downgrade my laptop pavilion g6 2231tx from windows 8.1 single language to windows 8 which came in default with my laptop.
    My question: since my lappy came pre installed with the windows 8 (64bit) and then got upgraded. So if i refresh my pc via the recovery partition on my HDD will it revert back to win 8 or do i have to use the recovery discs i made and will i lose my entire data on C: 
    Reason :  i am facing a lot of issues with my laptop recently specially while gaming i never faced any issues with gaming earlier when my lappy was running win 8 no lag or drop in fps as such but since i upgraded (which was against my will as microsoft one fine day decided to throw win 8.1 down on my face) . Some how was able to get the amd radeon switchable graphics back up and running but it seems it has no practical use over there  as such
    apart from that my computer  has degraded in performance since i have upgraded i tried to use win 8.1 since the past 1 year just coz it had all my programming IDE loaded and removing it would just be all the more hassel but even those applications have started responding really slow now most just take up hell  lot of load time. 
    my system specs are :
    2.4 GHz Intel Core i3-3110M processor 
    4 GB 1600 MHz DDR3 RAM
    AMD Radeon HD 7670M (1 GB DDR3 dedicated)
    Looking forward to your early replies. thanks in advance 

    aakash_dhar
    Welcome to the HP Community Forum.
    I am not going to try and talk you out of doing this -- you are the administrator.
    You might be in for a rough ride regardless of which path you take back to Windows 8.
    Standard Refresh removes your installed programs and your installed Browsers -- the security programs -- everything that is not "bare bones" -- and that assumes that it will work. 
    READ please and know what you are trying to do:
    HP PCs - Refresh Your PC to Resolve Problems (Windows8) - c03538721
    The Recovery Partition may -- or may not -- still be in working order.  The Upgrade to Windows 8.1 may have destroyed the Recovery Manager.
    Before you do ANYTHING, please back up all your data to an external drive -- back up your most critical data to more than one place, perhaps to a USB drive or to Cloud >> somewhere so you can get to it.
    What if your home made Recovery Disks do not work?
    You might call HP and see if you can purchase a Recovery Set.  Because you have a working computer right now, you might make the call BEFORE you take apart your Operating System.
    Contact HP – USA - Phone Assistance
    List of
    HP tech support/ Customer Service Phone Numbers – Some English Speaking Countries
    Including UK and Europe
    Something nice to know:
    Boot / Startup Options for Windows 8
    Safe Mode can easily be added to the boot screen!
    How to Add "Safe Mode" to Windows Boot Manager in Windows 8 and 8.1
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • ITunes library xml from windows to mac using external drive.

    Hi there!
    I'm a newbie on mac computers.. I've recently purchase a macbook pro retina.
    So, I used to use iTunes in windows XP. My old computer crashed and I can't re-open it and save files...
    Now, the only file I have from my windows library is an "library.xml" file.
    The mp3 files that I had in previous iTunes playlists are in my external I: Drive. (not in Itunes folder).
    I was searching in apple communities to see how I can transfer playlists in my new iTunes on mac.
    But I can't find a solution to my problem... and unfortunately I don't know if there is...
    I've try to set the iTunes media folder location my external hard drive, from Preferences-->Advanced-->iTunes media folder location.
    Then I go to file-->library--> import playlist and I open the "library.xml".
    The result is that I have all my playlists in tact, like it was in my previous iTunes.... But THERE IS NOT ANY FILE ON THEM!!!
    So, I have only the playlists... Could you help me to set my I: drive as default path of itunes library, to get my playlists WITH the mp3s?
    PLEASE HELP!
    Thank you in advance.

    Should I change the Preferences-->Advanced-->iTunes media folder location back to default folder?
    That should be set to wherever you want iTunes to store media in the future (though it sounds like you are planning on keeping this unchecked anyway).  It has no effect on where iTunes looks for existing files.  That is already determined when you first add the file to iTunes or through later consolidating.
    In theory you should be able to start iTunes with a blank library, use the import function to add that .xml file and it should still point to the files on the external.  If that is not working then I guess it is possible all those %20 space designations may be causing problems.  It's strange you are seeing those coded that way but  it is likely some carry-over from Windows.  The purpose of adding a test file to the external, then adding it to iTunes, then looking at the .xml is to see how Mac iTunes lists the path for a file on the external added when using the Mac so you can use that as a model for changing other paths if necessary.
    Holding down the option key while starting iTunes (make sure you are using the correct key) or immediately after starting it should invoke a screen asking if you want to make a new library.  If this is not working for you then I have no idea why because it works for hundreds of other people I have told to do this.

  • How do I get downloaded CD's from Windows vista to my Ipod touch 5th gen?

    I bought an ipod touch 5th gen and have itunes on my computer , but I can't get my down loaded cd's from windows media player to itunes or my ipod. Please ask me more questions if you can help me.

    Adding music and other content to iTunes - Support - Apple

  • Can I use OS 9 printer from Windows XP? Software needed?

    I have a printer that I have been using from Windows XP by use a program called PC Maclan, but this computer went down and I found out that they make that software anymore. This program was great because it allowed me to browse the Mac network when adding a printer, but for some reason it doesn't do that anymore when I installed it on other XP computers. The replacement software for PC Maclan does not work on OS 9, does anyone know of a program that will?

    Is it a USB printer perchance? OS9 at the very least has USB Pinter Sharing available.

Maybe you are looking for

  • New Realplayer 10.5 with Harmony Technology supports Zen produ

    hi, not sure if anyone knew about this but the New Realplayer 0.5 with Harmony Techology supports Zen products. It's a free download as well. It even works with my zen micro. Just wanted to share this information. Maybe it might help those having tro

  • Opening an HTML file in Edge - timeline

    I wrote an HTML page using CSS animate rules then opened it in Edge, hoping that I could link it to the CSS file and have revealed for me a Timeline ... is there a method for acheiving this goal?

  • ITunes Store does not support my country

    I live in Georgia,Tbilisi.iTunes Store does not support my country.Does that mean that I cannot enter my credit card information and I wont be able to buy apps for my iphone 4s?

  • Calender for dates in parameter Form!!

    Can we show calendar object on dates in Parameter Form in Reports6i. Please advise. Thanks a lot. Kind Regards Sarda

  • Combining GarageBand files?

    I recorded a number of of voice tracks in separate GB files. I now want to put sveral into one file and have them play consecutively. How do import a GB file into an existing GB file?