Down load times out I have a NB 305 toshuba 32 bit

a box comes uo and says timed out. Internet Exployer say it blcoks foxfire.

errorwriting to file:c:\programfiles\itunes\itunes.resources\ru.|proj\storepreorderbutton.png
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
XP instructions in the following document: How to perform disk error checking in Windows XP
Vista instructions in the following document: Check your hard disk for errors
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Similar Messages

  • What makes down load time out

    Pogo.com game site says my flash player is outdated. tried several  times  to down load  new version, keeps timing out at 47%. I went into help and tried 2 different suggestion with no sucess. any suggestions

    Try the offline installer...
    Windows: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header
    Mac OS: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

  • Im trying to upgrade to the 4.3.4 but keep getting a error message 3259 down load time out ?? can any one help

    I'm trying to upgrade to the 4.3.4 when im downloading it states that it has 32 hours download time ( has Apple cheged this )  but keep getting a timed out error message err=3259, is there anything i can do  (beside buy a mac)

    You cant try this
    Slide to Unlock Several users have been able to fix this issue by simply sliding the “Slide to Unlock” button on their iPhones before attempting the update.
    Disable antivirus software. If you are using Windows, try temporarily disabling antivirus software before applying the update.
    Disable firewall. Instructions for Windows XP, Windows Vista and Windows 7.
    Update router firmware. Check your router manufacturer’s website, and download and install any new updates for your wireless router. Alternatively, try plugging the ethernet cable directly into your computer.
    As last resort download separately 4.3.4 http://appldnld.apple.com/iPhone4/041-1923.20110715.BnATg/iPhone3,1_4.3.4_8K2_Re store.ipsw and use Shift + Restore button on itunes. Then restore your settings and etc. from backup.
    Remember to Beackup first, because Shift + Restore will make factory restore.

  • I made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it

    i made a imovie project and it has many transitions and stills and music soundtrack and rolling comments and text embedded in it. . I try and export it and it wont prepare the project beyond 16 minutes and shuts down every time. I have tried exporting it to movies idvd itunes,and quicktime in a variety of sizes although not the smallest as I want to watch it on my computer and tv. All videos were recorded on an iphone. Apple store couldn't help me and suggested I redo part of the project. It is a really good project and would take hours to redo it . I just want to export it. Can any one please help???

    Hi
    Trying to get a picture of it.
    • Free Space on Your Start-Up (Mac OS) Hard Disk. How Much ?
    • Any other hard disks connected ?
    • If so - Formatted as ?
    Yours Bengt W

  • Airport times out and have to restart

    airport times out and have to restart constantly

    I have exactly the same problem.  It started a few weeks ago and the helpline could not work out the problem, so they sent me a new HUB 2.0.  Ever since, the broadband connection keeps stopping every day several times a day, which is a real pain as I work from home.
    I've just ran InSSider and there are two NETGEAR SSIDs on the same channel as mine (11). Would this affect / be part of problem? There are other SSIDs on channels 1,6,7 and 13.  Not very techie, so would appreciate very basic advice!

  • I have 10.5.8 can I down load Lion?, I have 10.5.8 can I down load Lion?

    I have 10.5.8 can I down load Lion?, I have 10.5.8 can I down load Lion?

    10.6.8 introduces the Mac Application Store, the only way to download Lion on the web. However, you can purchase Lion on a USB dongle for $69 US from Apple.
    Although you can't update Leopard from the dongle, you could clone the Leopard volume and erase and install Lion on the original partition and then use the Leopard compatible Migration Assistant. http://support.apple.com/kb/DL1434?viewlocale=en_US&locale=en_US
    All in all, cheaper to just buy Snow Leopard, and then buy Lion from the Mac Application Store.

  • How do i after down load creative cloud and have it in the tool bar , then click on it ,it brings up a box  called creative cloud then just rotates not bringing up any apps ?

    how do i after down load creative cloud and have it in the tool bar , then click on it ,it brings up a box  called creative cloud then just rotates not bringing up any apps ?

    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    -Similar in Windows https://forums.adobe.com/message/5853430

  • Tried to down load Mountain Lion  currently have OS 10.6.8. Said computer would not accept?  did I do something wrong?

    tried to down load Mountain Lion  currently have OS 10.6.8. Said computer would not accept?  did I do something wrong?

    Does your iMac meet the system requirements as set forth on this web page?
    http://www.apple.com/osx/how-to-upgrade/

  • VI loading times-out for 50 seconds when another networked PC is shut down

    I'm moving my LabVIEW 4.0.1 VIs from an "old" Win95 PC to a "new" Win95 PC.
    All of the VIs were copied from the old PC to the new PC.
    The VIs load and run just fine on the new PC when both PCs are alive on the network, but LabVIEW experiences a 50 second time-out delay at the beginning of VI loading on the new PC when the old PC is disconnected from the network.
    The VIs eventually load and properly execute after the delay on the new PC (while the old PC is disconnected from the network), but the delay is a nuisance.

    The paths to one or more of your VIs still point to your old computer. Only if it can't find the original does LabVIEW start to look for them locally. Once you've loaded everything with the old pc off the network, you should save every VI and the next time you do a load, it should automatically load everything locally because the paths have been updated. You can verify this by displaying the hierarchy and turning on the display of the full path in label.

  • Slow page loading / Time outs

    Hi guys,
    I am getting very slow page loading times. This only started to happen today, before this my connection has been solid.
    I have reset the router, all the other PCs in my house are having the same problem. I am not running any P2P/Downloading software.
    Speedtest says I am connected at 12MBPs. It takes me a very long time to load a page and most of the time they just time out.
    Router stats -
    ADSL settings
    VPI/VCI 0/38
    Type PPPoA
    Modulation ITU-T G.992.5
    Latency type Interleaved
    Noise margin (Down/Up) 3.6 dB / 5.7 dB
    Line attenuation (Down/Up) 29.5 dB / 12.7 dB
    Output power (Down/Up) 0.0 dBm / 12.9 dBm
    Cheers

    Keith_Beddoe wrote:
    There appears to be a problem with the BT DNS servers at the moment. They keep going offline.
    Hopefully someone is aware and dealing.
    Which ones are you using ?  BT have LOTS of machines providing DNS services
    I'm currently using:
    Primary: 194.72.9.38
    Secondary: 194.72.0.114
    ...and haven't really noticed anything untoward all day, and I've been online and active for most of the day. Not much longer though - soon finished, then it's beer
    I have seen quite a few reports of slow loading pages etc elsewhere though.

  • I need to know how to down load movies, that I have on DVD, on to my hp computer then down load it to my ipad

    I need to know how to down load movies,from my DVDs, onto my hp computer and then down load them onto my iPad

    I read the thread question differently than you did I think.  I did not think the DVD in question was a commercial DVD.  However, you have much more experience in this discussion board than I do.  You probably have seen this question many times and assumed (apparently correctly) that it was a commercial DVD.
    I was answering the question based on it being a DVD created within a work/home environment that is needed to be put on the iPad.  I have been toying around with that exact process in the past week.  Work training videos etc, that I have created, put on DVD then downloaded to my iPad for travel and display.
    My bad!

  • Side loaded "time-out" app

    I installed a side loaded app called android "time out" to fix my problems with instagram , which didnt want to work, it was giving me an error: camera is too low for this app, or smtgh like that,whatever, that app fixed it. But after that my phone started to restart by itself, and also while i'm browsing internet it get locked by itself. Could this be because of this side loaded apps ? Thanks in advance, be aware of my grammar mistakes.

    Having problem with internet connectivity on WIFI - anything that depends on DNS for data whether it is a web browser or an app while using WIFI.  I call this problem "WIFI Lockout".
    This happens on iphone 4, ipad 2 and ipad 3 that has been updated to iOS 6.
    I am not talking about the issue of the missing apple page (day 1) or the inability to turn on/configure WIFI after updating to iOS 6.
    This is what i have discovered so far.
    You could be in the middle of surfing or using any app that makes data calls based on DNS (when you type google.com that is translated in the background so your device knows where to go - summary only) and suddenly you can go no where or do nothing!
    Sometimes conectivity goes trouble free for long periods, other times it is repetitive "WIFI Lockout".
    Yea sure, you can restart the WIFI connection, but WHO wants to CONTINUALLY do that?
    Interestingly enought the device is still successfully connected to the internet via WIFI, but DNS request fail to pass successfully from the iOS 6 device.
    Apple (or any curious iOS 6 user that wants to see my point), when this happens "WIFI Lockout" open up a browser before you reset the WIFI  connection and type type 74.125.227.144 (google) and then “go” (I tried both safari and chrome).  A google search page will come up and you will be able to execute a search (of course any link you click on will not work as it is dependant on DNS resolution).
    The above IP connection to google proves NON DNS traffic works, so the issue is not the WIFI connection to the access point that is the problem.  It is not an access point configuration/firmware or security protocol issue either because data does pass when the above steps are followed.
    I KNOW THIS IS NOT ALL OF THE PROBLEMS WITH iOS 6, BUT THIS IS A HUGE PROBLEM NOT BEING ABLE TO SURF OR GET DATA THE iOS 6 DEVICE IS REQUESTING WHILE ON WIFI.

  • Problem in down loading Grid out to Excel

    Hi all ,
    when i down load grid output into excel using list->export->localfile ->spread sheet,
    Some columns headings are down loaded with medium texts and some with short texts (seltext_s) .The same is displayed in default output(with out dragging) .  I found that fields with short texts are because of field  data length is less than 10 char .customer is asking to  medium or long texts in excel when down loaded..
    1)Hence i expanded fileds and then down loaded , same short texts are down loaded to XL.
    2)I incresed output length for those  fields so as to take medium or long texts in default output of report(no need of dragging ) and then  down loaded to excel .Still it is taking short texts only in XL .
    Will there be any default settings to consider text to considered while down loading or do ineed to set explicitley .Please advise me ..
    a bit urgent .
    I constructed fieldcat  as follows
    ls_fieldcat-fieldname    = c_cname.
      ls_fieldcat-seltext_l    = text-004.
      ls_fieldcat-seltext_s    = text-004.
      ls_fieldcat-seltext_m    = text-004.
      ls_fieldcat-reptext_ddic = text-004.
      MODIFY p_fieldcat FROM ls_fieldcat TRANSPORTING seltext_l seltext_m
    seltext_s reptext_ddic WHERE fieldname = ls_fieldcat-fieldname.
    Many Thanks
    Dharma P

    Hi  A. Caglar Ozkor,
    Basically the parmeter layout-colwidth optimization  is set to  'X'. I tried out to increase outputlength after setting it to '   '  , then down loaded to excel .In that case also it picked only short texts , Hence I thought there would be  some settings  to decide what text to be picked while down loading  in to excel .
    Guys , Any ideas to solve this problem   ...
    Dharma P

  • Where do I put the conversion license key to down load this. I have chaged computers and i am looking to add this thank

    I have changed computers and would like to add the converter to my new computer, I have the key code, just not sure where to go to input it to add it to the down load helper

    Brent -
    Loose class files should be installed under the WEB-INF/classes directory - in a subdirectory which corresponds to your Java package. So, for example, the class com.foo.MyTest would need to be installed in the WEB-INF/classes/com/foo directory. You can also package your classes up in a JAR file and install the JAR in the WEB-INF/lib directory. Classes in either of these locations will automatically be available to the web application.
    Note that this behavior is actually defined by the Servlet specification (see section 9 "Web Applications" in the Servlet 2.3 spec). You can grab the spec from:
    http://www.jcp.org/aboutJava/communityprocess/final/jsr053/
    Andy

  • My files did not down load properly do not have two files zip or second folder help

    files did not down load properly need help need to build website for class do not have the zip file or second folder new to this

    Hi
    could you tell, does it gives you any error when you try to download raw files
    and i would recommend you do update the camera raw plugin
    Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.2

Maybe you are looking for

  • Kernal Panic Airport?/Bluetooth to blame?/Wifi?

    Hi, i have already asked this question before on the hardware forum however as it seems more like a kernal problem i thought i might as well post it in here and see what the community thinks. I had a kernal panic error code which caused the problem m

  • Create Item Category

    I have to create new item category. Is there any TCode or Path to create new item category

  • Exception during room creation

    Hi everybody, First time I'll use collaboration.  I'm using EP 6.0 sp9, I just applied patch 3 for KMC. I'm trying to create a collaboration room, but the last step (finish button) gives me this error: "Error: Room MyRoom has not been created Excepti

  • Lookup server address

    I enter the vCenter Server's IP address into the Lookup service address:  https://10.10.15.40:7444 It re displays as https://10.10.15.40:7444/lookupservice/sdk When I click Show Details I get this: Certificate details Issued to Common Name vCenter51.

  • HT1766 Are notes saved in a backup?

    Are notes saved in a backup?