Down loaded 802.11n enabler now loading pages are at a crawl

Down loaded 802.11n enabler now loading pages are at a crawl? Have a Linksys wrt160n what should be my settings to get speeds at least back to before the down load.
Now at WAP personal, mixed, 20-40 on the Linksys
saw this after the down load when trying to load
Aug 20 01:24:49 my-name-computer-2 mDNSResponder: Repeated transitions for interface en1 (192.168.1.102); delaying packets by 5 seconds
Aug 20 01:24:52 my-name-computer-2 mDNSResponder: NOTE: Wide-Area Service Discovery disabled to avoid crashing defective DNS relay 68.238.64.12.

Meant WPA

Similar Messages

  • How to install AirPort Extreme 802.11n Enabler?

    I just bought the Airport Extreme and I have the CD that came with it loaded. I'm installing the package that is on the CD and it reads that the following items are available for installation and one of them is the Airport Extreme 802.11n Enabler. I "continue" and it only allows me to do a basic upgrade. How do I know that the Enabler was correctly installed and I can now access using 802.11n?
    I have a MacBook Pro Core 2 Duo 2.33Ghz

    Steve, fire up your Network Utility. You can find it in your Utilities folder. From the row of tabs across the top of the window select "Info" - the first option on the left. Nxt select the "network interface for information". You'll be wanting "(en1)". At the bottom of the info you'll see an entry for "Model Wireless Network Adapter". In parenthesis under this title will be "802.11" and some letters. If you see a letter "n" then it means the enabler did its thang!
    To actually select how your computer will communicate with that little white box with the green light on the front (um...it is green, isn't it?) then fire up your Airport Utility. Select "Manual" setup. Make sure you have the Airport icon highlighted at the top of the window then select the "Wireless" tab. The "Radio Mode" entry is where you do your bit to select "g", "n" or whatever in 2.4GHz or 5GHz.
    I find it best to do one thing at a time. Slower but at least I can undo the mess easily.
    See also http://discussions.apple.com/thread.jspa?threadID=1126076

  • 802.11n Enabler for MacBook Pro not included

    Apple's page about the Airport Extreme Base Station says, "Most new Mac computers ship with built-in 802.11n wireless support that can be easily enabled with the installation of enabler software included with new AirPort Extreme wireless base station (see sidebar)."
    Yesterday I purchased the Airport Extreme 802.11n WiFi Wireless Base Station (Model MB053ZA/A A1143). I have installed it OK and it is running fine. But I now want to "enable" 802.11n on my MacBook Pro but can not figure out how to do it.
    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo. The en1 page in Network Utility shows Model: Wireless Network Adapter (802.11 a/b/g).
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    Regards
    Peter

    I have searched everywhere through the box and looked everywhere on the one install disk (disk version 2.1 2Z681-6107-A) but I can not find anything that looks like enabler software for the WiFi network card in my MacBook Pro 2.16 GHz Intel Core Duo.
    There were several MacBook Pro models with 2.16 GHz Intel Core Duo processors. Your computer must be have a Core 2 Duo processor to qualify for the enabler.
    How is the enabler normally shipped in the AirPort Extreme wireless base station package? On a separate disk? On the install disk? As a free download?
    There is only a single installation disk that is provided with the base station. The enabler software is located within the AirPort.mpkg package. There is a download, but it is not free. (ref: AirPort Extreme 802.11n Enabler for Mac)

  • 802.11n Enabler Software on an Older iMac

    I hope someone will help me here. I have a 17-inch, 1.83GHz iMac and it is apparently only supports 802.11g, accoding to the Network Utility and accordinat to this on the Apple Store site which explains that you can enable certain Macs to support 802.11n with their Enabler software.
    Here's the thing. Like an idiot I paid for and downloaded the Enabler software and...you guessed it...it wouldn't load (saying my hardware wasn't correct for the software.
    Yet, I have a Gigabit Netgear Switch which reports with a green light when it is negotiating at a Gig and an orange light when negoitating lower than a Gig. My Mac is negotiating at a Gig, according to the green light on the Gigabit Netgear Switch.
    Can anyone tell me if this Mac is really enabled for a Gig negotiation (802.11n) or is my switch not reporting correctly?
    Here is the quote from the Apple Store for the Enabler software.
    "If you have a Mac with an Intel Core 2 Duo processor (except the 17-inch, 1.83GHz iMac) or a Mac Pro with AirPort Extreme, you can enable it to access an 802.11n wireless network using the AirPort Extreme 802.11n Enabler software."
    If someone could shed some light on this, I truly would be appreciative.
    Charles

    Thanks Niel,
    That really helps me out. Do you know if I were to purchase the newest Airport Base Station Extreme, would it show up as a Gigabit device if I connected to my home network via an ethernet cable? I only need it for a hub in a remote part of my home, and I can easily get an ethernet cable to it.
    It's a related question to my first question, since I'm really trying to understand the speed differences in wired versus wireless networks.
    Thanks again for you quick reply,
    Charles

  • 802.11n Enabler-States I do not meet the h/w req. but I do... Pls look

    Good day.
    My mac book 13" is a core duo, I purchased the 802.11n enabler and now getting an alert stating the computer does not meet the hardware requirements for this update.
    Does anyone know what I'm getting this. based on the spec that apple give on the enabler page this should work.
    Thank you for looking.
    Tom

    auriburu, Welcome to the discussion area!
    Please don't post your email address in a public forum. You never know who is going to pick it up.
    First use KB 301724, How to identify your iMac to identify what type of iMac you are having a problem with.
    Then click on the appropriate icon below to visit the area for that iMac and post your question there.
    iMac (CRT) G3 iMac (Flat Panel) G4 iMac G5 Intel-based iMac Aluminum Intel-based iMac

  • 802.11n enabler not installing on Leopard

    MACBOOK PRO getting error (after re-purchasing the 2 dollar 802.11n enabler) on Leopard
    Tried to install and it tells me cannot install on this hard drive
    Help!!!!!

    If you have Leopard installed, the enabler must be included in the install because I followed the directions listed on that page...
    +Before purchasing the 802.11n Enabler software, please check to make sure that your Mac does not already have the 802.11n enabler already installed.+
    +Open Network Utility (found in the Applications > Utilities folder)+
    +Under the Info Tab, choose Network Interface (en1)+
    +In the section "Model: Wireless Network Adapter," if it says (802.11a/b/g/n), you already have the 802.11n enabler installed. If it says (802.11a/b/g), you do not have the 802.11n enabler installed.+
    I looked and mine says a/b/g/n so its already installed and I didn't download that enabler. You may way want to try uninstalling it. Hope that helps, good luck
    edit: i have leopard installed as well, forgot to mention that.
    Message was edited by: vinyl313

  • 802.11n enabler won't install on 10.5.3

    Greetings,
    I just did a system re-install (upgraded my HD) today. When I was still running Tiger, I bought and installed the 802.11n enabler. Today, the enabler won't install. I am now running OS 10.5.3. I made sure the appropriate Airport Extreme updates are applied.
    The error message I get is "You cannot install AirPort Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
    Any ideas?

    Very simple, thanks very much.
    A nicer error message could have been "enabler not necessary, 802.1n is functional under Leopard."
    Thanks again!

  • AirPort Extreme 802.11n* Enabler for Mac 4 use with Touch?

    Hello,
    I have a 2nd Gen Touch with the latest updated software. I use Airport to connect to the internet on my new iMac 24". Will the AirPort Extreme 802.11n* Enabler software now offered in the Apple store($1.99) for Mac improve communications between the Touch and my iMac?
    Thanks

    Nope. Your touch is still limited to b/g mode wireless. In fact, if you have an all n network, your touch won't even know that it exists.
    Most of your Mac to iPod communication is via the USB cable unless you are using Remote or other applications that can move files on and off.
    BTW, that software is to enable early intel Macs to use N wireless. If your Mac is relatively new, you won't need it.
    Message was edited by: luvlabs

  • AirPort Extreme 802.11n* Enabler

    The Apple Store page for this 'Enabler' says it comes included with the latest AEBS. If this is so, how do you access the update to install it on your machines? There seems to be a complete lack of information on this.
    Any help greatly appreciated...

    I've purchased the update and i am not able to install it. I get as far as to the point where you have to choose the HD where you want to install it in. I get a red exclamation mark saying "You cannot install Airport Extreme 802.11n Enabler on this volume. This volume does not meet the requirements for this update."
    I have installed all the software updates and still getting this message....Can anybody help me/tell me what i'm doing wrong?
    Thanks for any help!!

  • AIRPORT EXTREME 802.11N ENABLER-ZML

    I just recently purchased the AIRPORT EXTREME 802.11N ENABLER-ZML, and it says it was 'Electronically Delivered', what does that mean and how do I install it?

    Click here and follow the instructions at the bottom of the page.
    (29492)

  • Airport Extreme 802.11n Enabler wont install

    hi,
    i just bought the Airport Extreme 802.11n Enabler for my MacBook Intel Core Duo. when i opened the disk image and tried to install, i got an alert saying my computer does not meet the hardware requirements - even though it is a MacBook Intel Core Duo.
    i followed all instructions on the Apple Store page before purchasing, including checking my Network Utility to verify whether i needed the software. currently i only have the 802.11 a/b/g adapter. see:
    http://store.apple.com/1-800-MY-APPLE/WebObjects/canadastore.woa/wa/RSLID?mco=B4 8E8262&nplm=D4141ZM%2FA
    any suggestions? my MacBook is a week 25 model.
    thanks,
    gimiwan

    Your computer needs to be a Core 2 Duo-based Mac for the enabler to install, as the necessary hardware isn't present on an older processor or a 1.83GHz 17-inch iMac. If your computer supports the enabler, install this software and try installing the enabler again.
    (19825)

  • 802.11n Enabler does not work!

    I have a MacBookPro with Core Duo. I bought an AirportExtreme Basestation and installed the software... it showed me that it also installed the 802.11n Enabler. BUT: when I go to the network utility program and select "en1" it still only shows a/b/g compatibility. I re-installed a few time, but it wouldn't change.
    This, of course, has also the effect that when selecting the 5GHz 802.11n at the basestation, my computer wouldn't find the basestation at all (have to reset it afterwards).

    The 802.11n enabler works in Macs with the Core 2 Duo processors, not the Core Duo. I understand that you can upgrade the wireless card by buying a replacement from Apple.
    There are other threads here that describe doing this.

  • 802.11n* Enabler will not install

    hey guys.
    I have purchased my copy of the 802.11n* Enabler for my 20" iMac Core 2 Duo 2GHz, but I keep getting a message saying "Your computer does not meet the hardware requirements for this update.".
    My iMac meets all of the requirments as far as I know (Leopard 15.5)
    I also tried installing it on my Macbook (Tiger 14.9) but I get the same message.
    any thoughts as to why this is and how I can fix it??
    thanks
    GK

    Airport Extreme refers to my wireless card build it right, and not my router (which is not an airport, but is an "n").
    Apple uses the term "AirPort Extreme" for the built-in wireless on the newer Macs so it tends to get confusing when they use the same term for their base stations. In this case, the "n" enabler is a firmware update to the built-in AirPort Extreme in your iMac. Similarly the "AirPort Extreme Update 2007-002" is a software update for this same built-in device. All firmware updates to the base station itself are done through the AirPort Utility.
    I'm not sure why you are having difficulty updating your iMac as it appears, according to your description, to be eligible. To double-check, that it may already be installed take a look at this Apple article: How to tell if 802.11n-enabling software is installed

  • 802.11n Enabler Doesn't Want To Install

    I have a new MacBook 2.0 GHz Intel Core 2 Duo and when I downloaded the new Airport Extreme 802.11n Enabler it tells me that my computer doesn't have the correct hardware. I am missing something here? Everything I have read tells me that this should work and this hardware should be built in. Let me know if you have any insights...thanks

    Grahamstine, Welcome to the discussion area!
    Are you certain that your MacBook has the 'Core 2 Duo'? There are 2 different 2 GHz MacBooks. One has a 'Core Duo' processor and the other has a 'Core 2 Duo' processor.
    Go to the Apple menu and select "About this Mac". It will tell you what type of processor your MacBook has.
    If your MacBook does have a 'Core 2 Duo' processor, ensure that you have installed the AirPort Extreme Update 2007-001.

  • Aiport extrem 802.11n enabler doesn't work

    Hi everybody
    I purchased a belkin N1 Wireless router. This allows the n connection and therefore I also purchased the 802.11n enabler.
    The problem is, that this enabler says that I doesn't have the required hardware.
    I have a MacBook Pro (Intel CoreDuo). What did I wrong?
    Can anybody help me there?
    Thanks in advance
    PS: I also installed AirPort Extreme Update 2007-002

    MacBooks with Core 2 Duo processors are eligible for the 802.11n update, but not the earlier MacBooks with the Core Duo processors.

Maybe you are looking for

  • Problem with Jabber and file transfers WAN - LAN-Users - a solution!

    Hi, I read a lot of messages about problems with file transfers between iChat-Users, if one (or both) are behind a NAT. I had this problem to and found an easy solution: My situation iChat-Server behind a Netgear ProSafe FireWall. I opened the needed

  • Ora-01403 no data found cursor error - Please help.

    DECLARE name1 talent.candidate_name%TYPE; -- Declare variables name2 long; -- Declare variables emp_id talent_id.emplid%TYPE; NO_DATA_FOUND EXCEPTION; CURSOR c1 IS select candidate_name,(''''||trim(upper(candidate_name))||'''') as tst from talent ; B

  • Chinese characters in reports 6i

    Hello all, I am working on some chinese reports.. when i open RDF report in Report Builder 6.0.8.11.3 and save it with out modification the lables in chinese characters are missing when i port in run inthe application.. the data from the dtabase is d

  • NOT IN clause in CASE statement condition not working

    Dear Friends, I want to use below condition in WHERE clause of my SELECT statement. WHERE <...........> <...........> AND eihf.exr_aip_asset_sid NOT IN (CASE when safa.fund_relation = 'C' and safa.fund_account_code != vFundAccount THEN (37874,37909,4

  • SharePoint 2013 - BranchCache

    Hello! I have a problem and need some help. Our branch office is connected to the main office via a really bad WAN connection. Due this fact, our SharePoint 2013 system works very slowly for our collegues from the branch office. So we decided to esta