Down-loading software upgrades is being limited by "server timed out"
My broadband connection is of modest speed as I live many miles from the Telephone Exchange. When I attempt to download Apple software upgrades, say of 50 mb, I get cut off after about 12 mb with a message" sever timed out code -1001". When I make a second attempt, I have to start again "at the beginning" rather than continue at the point where the last attempt failed.
Grateful for any advice (apart from being told to move house nearer the Telephone Exchange!) I am only just computer literate.
regards
Hi,
Make sure that the software while upgrading and downgrading was from your service providers official site. If not, go to the following link :
http://in.blackberry.com/support/apps-and-software/desktop-and-device-download-sites.html
Now, if you have already upgraded and downgraded the software, and tried battery pulls. The only problem that i can think of for browser time out's could be with the service books.
Open the link and follow the instructions:
http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=FAA7D6BA303A725FD73A92C596891272?...
If your query is resolved then please click on - 'Accept as Solution'
Thank You.
Similar Messages
-
Having problem down load software off the internet
having problem add down load software off the internet
Adding to Jon, that single /20 block is a huge block , you could brake for example to 16 /24 networks, 254 ip host per /24 network.
Example :
175.106.16.0/24
172.106.17.0/24
x.x.18.x/24
x.x.19.x/24
x.x.20.x/24
x.x.21.x/24
and so on...
The key to keep in mind is how you would want these blocks be announce, I suggest you do thorough analysis of your company internet architecture , present and future and come up with proper allocation of your blocks to minimize the re-addressing and re-advertizing nightmares.
another example could be out of a /24 off your /20 block say 175.106.18.0/24 can be further brake down to smaller blocks to be announced in various sites , again , like Jon indicated in his post, it all depends on your company's requirements for example such as branch offices having their own internet ISP where you may have public web servers requiring public IP addresses, or even requiring public IP pool blocks for various purposes etc..
Another example of further braking down your /24 you can have two /26's off that 175.106.18.0/24 that is still part of the /20 network , which could be 175.106.18.0/25 and 175.106.18.128/25 allowing 126 public IP addresses per network , and have these blocks being announced by different office branches that have their own ISP , this is just an example , or announce both and separate the routing at the perimeter device, there are so many variables in allocating and braking down that huge /20 block.
Here is a freeware subnet cal if you are still looking for one.
http://www.solarwinds.com/register/registration.aspx?program=92&c=70150000000CcHV&INTCMP=DLIndexA_FreeTools_freeSubnetCalculator
my 2 censt
Regards -
Where to down load Software or driver for NI PCI-8430/16 (RS232)
where to down load Software or driver for NI PCI-8430/16 (RS232)
Try here:NI-Serial 4.0
I just did a search from ni.com for "ni-serial download" and that was the first link.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Why can't I update my iPhone 4 to iOS 5.1? Every time I try it gets all the way done downloading it; however when it's processing the file the page tells me "There is a problem downloading the software for the iPhone. Network connection timed out. Make sure your network settings are correct and your network connection is active. or try again later." and next to the file it has err = -3259. I have tried this 17 times and it won't work. My iTunes is completely up to date. I have made sure that my connection is fine and I have tried turning my firewall off with no avail. This has happened to me before but usually the update will go through after 2-3 tries, never to this extent. I don't know what to do. Help!
Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799 -
Unable to update software 4.3.5 server timed out?
When I attempt to update my iphone with new software update 4.3.5 on itunes, system will attempt to download and after at least an hour it states "There was a problem downloading the software for the iphone. Network connection timed out. Make sure your network settings are correct and network connection is active or try again later". There is no problem with the connection - my internet is clearly connected throughout the process; I have tried again at least 5 or 6 times; I even uninstalled itunes and reinstalled - so no problem with itunes and I know its the latest version. Never had any trouble updating before - any suggestions??
This is asked and answered often.
Disable your firewall/security software and try again. -
'408' error server timed out because of added software?
i get a '408' error--server timed out when i try to download from iTunes--this is straight after installing legit rosetta stone software--a windows site mentions this as a possible cause--and the timing points to it--other songs downloaded--but pretty sure it stopped after the software finally got properly installed--any ideas? Thanks.
You are welcome.
There is a contact link if you want to try it.
iTunes -
There was a problem downloading the software for the ipod. Network connection timed out
There was a problem downloading the software for the ipod. Network connection timed out. This is for the latest ios for the iPod touch. Already walked through the steps to validate that all settings were correct with the firewall, Windows defender has been disabled. This has not been an issue with previous ios updates. Not sure what the issue here is.
Hi,
You might have to place your iPod in Recovery Mode: http://support.apple.com/kb/HT1808.
Hope this helps!
---likeabird--- -
I'm using Entourage 2008 v 12.3.5 and lost ability to SEND. Tried many small email tests. Server continues to leave time out message. "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic." Comcast tells me server is not down all other network activity is fine. WHat's up with this?
Starting earlier today, this also became my problem - can receive but not send in Entourage. The account settings are correct in Entourage - I even created a new account. My Mac running 10.7.5 won't read the original Office : MAC 2008 disk, so I can't do a fix or reinstall from the disk.
This is not an issue if I log onto the Comcast site.
And so, I started using Mail but, unlike Entourage, Mail won't import my Entourage info.
Argh... :-( -
Connection server timing out during software update?
my itouch is stuck on version 2.2.1 and every time I try to update it to the newer versions, an error message pops up saying that the conncetion server timed out. my network connection is active, i can download apps and music and stuff i just cant get this software update for some reason, any ideas?
I had little problem downloading the update for my iPad. However, it took about a day to download the the update for my iPod. It kept timing out.
-
There was a problem downloading the software for the iphone.The network connection timed out. Make sure the network settings are correct
I just had the same problem updating my iPhone 4. I found out by turning my Kaspersky virus protection OFF, then everything worked out, and I was able to update my phone.
Virus protection programs can cause alot of problems sometime, so it's worth a try if you haven't already tried. -
im getting a error message (320) when i try down loading my software for my wrt160n any help
Don't run the CD if you getting error messages while installing it...
Follow the link here if your Internet Service Providor is Cable...
If your Internet Service Providor is DSL follow this -
HT1904 iTunes money ran out on my 4s now I can't down load or upgrade
iTunes money ran out on my 4s now I can't down load or upgrade
Have you added a new payment method onto your account e.g. added your credit card or, if they are available in your country, redeemed an iTunes gift card ?
-
try to down load app keep getting message apple id not verified no email sent to in box for verifcation please can you help me
Hi Bob..
Try resetting your Apple ID using the iforgot link here > Apple ID: "This Apple ID has been disabled for security reasons" alert appears
If that doens't help, try here > Associating and verifying email addresses with your Apple ID -
CIFS AO down after software upgrade
Hi all,
i'm currently starting software upgrade procedure in my WAAS environment.
I'm upgrading from 4.1.5b to 4.2.3c
after rebooting my WAE's i'm having the following alarm:
Critical Alarms:
Alarm ID Module/Submodule Instance
1 cifs_ao_down wafs WAFS
Major Alarms:
None
Minor Alarms:
None
nkrwa222#sh licens
License Name Status Activation Date Activated By
Transport active 06/22/2010 guf
Enterprise not active
Video not active
nkrwa222#
However even if i start the CIFS Accelerator the alarm still persists.
nkrwa222(config)#accelerator cifs ena
Enabled windows-print accelerator
Enabled cifs accelerator
WARNING: Accelerator doesn't optimize the traffic until license is configured.
It takes up to 2 minutes to start the traffic optimization after the license is activated.
nkrwa222(config)#
nkrwa222(config)#
I'm running no application accelerator cause i'm using transport license. And so i do not really need CIFS AO however i need to clear the alarm especially on CM.
Any ideas how i can fix this?
thanks for your inputDieter,
Correct, you can not enable any accelerators if you only have the Transport license.
I'd suggest you execute the following commands to see if the alarm clears.
pdi-7341-19(config)#no wafs edge enable
pdi-7341-19(config)#no wafs core enable
pdi-7341-19(config)#no accelerator cifs enable
Regards,
Mike Korenbaum
Cisco WAAS PDI Help Desk
http://www.cisco.com/go/pdihelpdesk -
Long time to load a first page, get "the connection has timed out" frequently.
Frequently takes a long time to get to first page. Even a "speed test" to check my DSL connection. Usually can get to "google.com" quickly but it did come up slow today (just a test for a simple page).
I have a wireless N router with it's own Firewall (which I didn't want) and I think I've turned it off. Symantec firewall, don't think WinXP firewall is on.
Tried refresh of Adobe Flash Player per suggestion in this forum, no help.
Would like to have a tool to see how long each step of getting to the web takes so I can see if there's a bottleneck.
Occasionally "try again" button works on the "connection has timed out" message.
My PC is 6 yr old. xp-home, lots of ram, HDD available. Run Symantec AV/MBAM frequently. Ran Housecall and Dr. Web- no problems.
Talked to my DSL provider and Symantec in depth. Similar lethargy when I get IE running but not as frequent as under FF. Measured my DSL speed - 5MB as promised.
When the lag occurs, Task Manager does not show FF taking a lot of processor time.
Have done the things suggested in FAQ to help with performance.
Also going to bleepingcomputer.com to see if there are suggestions there.
I'm hoping someone has experienced an analog to this and has a suggestion to diagnose and solve. Thanks - Mike.Here's your sign! This is my problem and its solution. Let me know if someone needs help to interpret.
If you frequently get "connection timed out", go to your ISP and get Manual DNS addresses. Then beat them till they put a real fix on their system.
Problem is in the DNS server service provided by my DSL provider, Bell South/AT&T. Result of a poor performing DNS is that one can't get thru to the selected site.
If you do a web search +dsl +"time out" you will see the history with Windstream. THEY finally issues a system-wide fix which, it appears, flattened the issue. Then add +AT&T to see that experience. I did not read it all thru, I'm wasted chasing this problem. I don't give AT&T ANY credit for customer service or heading off problems for their customers on this one.
AT&T support offers me:
==================================== start quote.
How do I check and update my DNS settings, if my DNS settings are not "server assigned"?
When you visit a Web site, your browser sends the site's alphabetic domain name to a DNS server. The DNS server translates the domain into a numeric IP address, then responds to your computer with the Internet location of the Web site. Incorrect DNS settings on your computer can disrupt this information flow and cause your Internet browsing to slow down or fail.
If you have trouble browsing the Internet, check your DNS settings. You likely have your DNS settings as "server-assigned." This allows DNS information to be automatically sent to your computer, which may improve your browsing experience. However, you may need to have your DNS settings manually entered
Note: If you are using a router to connect to your Internet service, check with your manufacturer's web site for instructions on updating your DNS settings with the following information:
Primary DNS: 68.94.156.1
Secondary DNS: 68.94.157.1
1. Click the Start button and select Control Panel from the menu.
2. Select Network and Internet Connections.
3. Double-click the Network Connections icon at the lower right.
4. Under the LAN or High-Speed Internet section, right-click the Local Area Connection icon and select Properties.
5. From the "Components checked are used by this connection" list, select Internet Protocol (TCP/IP), then click the Properties button.
6. Read the current DNS setting on the lower half of the TCP/IP properties screen. If the radio button Obtain DNS server address automatically is selected, you do not need to update your DNS settings. Otherwise, please continue.
7. Input the new Preferred DNS server of 68.94.156.1 and the Alternate DNS server of 68.94.157.1.
8. Click OK.
9. Return to the Network Connections screen. If you have a DSL Connection icon in the Broadband section, proceed to next step otherwise you have completed updating your DNS settings.
10. Under the Broadband section, right-click the DSL Connection icon and select Properties.
11. Select the Networking tab.
12. From the "This connection uses the following items" list, select Internet Protocol (TCP/IP) and click the Properties button.
13. Read the current DNS setting on the lower half of the TCP/IP properties screen. If the radio button Obtain DNS server address automatically is selected you do not need to up date your DNS settings. Otherwise, please continue.
14. Input the new Preferred DNS server of 68.94.156.1 and the Alternate DNS server of 68.94.157.1.
15. Click OK.
================================= end quote.
So it appears I can't put screen shots in here. Well I hope you get the gist.
In fact this is a bit hosed up.
It says if you user "automatic dns" you're OK, that's opposite of my experience.
I changed to the specified DNS addresses and things seem 99.9% fixed.
I also changed my Router (wireless) settings.
If there's a survey of my experience here I'll take it.
Mike Hardy
Maybe you are looking for
-
Here is the error message when I open up Firefox and it tries again to install the Zotero integration app: (I only have Word 2011) Installation could not be completed because an error occurred. [Exception... "'Neither Word 2004 nor Word 2008 appear t
-
Wirelessly bridge AEBSn and D-Link (DIR-655)
Hi, I'd like to use an AEBSn to extend the range of my existing 802.11n network (DIR-655 [Draft-N]) AP. I'd like to configure the AEBSn to use the same ESSID and WPA2-AES key as the D-Link and obtain the pertinent IP configuration from a server I've
-
Two copies of the same mail folders / Problem with TimeMachine backup
I have two copies of the same IMAP mail folders in my library 1. ~/Library/Mail (actual version) 2. ~/Library/Mail/V2 (old version) I guess this is the reason why my TimeMachine does not backup the emails (it only backups the folder with only one ver
-
I have two G4 Emacs, both running 10.4.8 The only difference is that Emac 1 has a 1 ghz processor and Emac 2 has a 1.25 ghz processor. Both have 1 GB of ram. Surprisingly, Emac 1, the slower 1 ghz processsor, actually works much better with Final Cut
-
IMac Airport continues to drop connection
I seem to be having the exact same issue that many of you have. My iMac is the only piece of hardware in my house that has this issue. The iMac will randomly drop its internet connection. If you turn off airport and back on it will reconnect just