Down loading video from a canon vixia hf s 21 camcorder

I have a canon vixia hf s 21 camcorder and I can not figure out how to down load the videos to imovie.

To get answer faster, ask this question in iMovie community.
https://discussions.apple.com/community/ilife/imovie
Best,

Similar Messages

How do I import video from my canon vixia hv40 into imovie?

How do I import video from my canon vixia hv 40 into imovie?

First decide which editing program you intend to use; iMovie, FCE, FCP, Adobe Premier, etc. Read the user's manual or Help files for your chosen application to determine the steps needed: the procedure will vary somewhat from application to application.
Next, with the camera and the computer off, connect the Firewire cable to both units, then power up. Set the camera to VTR (play) mode. Open your editing program and follow the instructions provided in the Help files for capturing DV footage from tape.
Do NOT expect the camera to mount on your desktop as if it were a hard drive or optical disc.
-DH
Message was edited by: David Harbsmeier
Message was edited by: David Harbsmeier

IMovie "does not see" videos from my Canon Vixia HF M32 and shuts down. Any ideas?

Lately, I have not been able to download videos as I used to from my Canon Vixia HF M32. My iMovie would not see the camera and would often close unexpectedly. It then gives an incomprehensible error message. I have no idea why this is happening or what to do. I was able to dowload some videos using a pc and a different software. Any clue?
Thanks

iMovie HD (version 5 and 6) works only with Firewire cameras, DV or HDV.
Footage from other types of cameras can be converted for use. Try VoltaicHD and convert to Apple Intermediate Codec (1080i or 720p) for HD footage or DV for SD (Standard Definition) footage.
If all you want to do is creating a DVD, go for SD footage in the DV format. A DVD is always SD.

How do I extract video from my Canon Vixia HF M30 to my ipad2?

I'm having a difficult time trying to extract video from my canon HF m30 camcorder to my iPad2. Tried sd card and direct USB connect. Also downloaded iMovie but that didn't help either. Are these 2 compatible? Help please

Copied from this link.
http://www.apple.com/ipad/specs/
Video formats supported: H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format.
I believe your camcorder records video in AVCHD format. If so, you will need to import the video with your computer and use a conversion utility to convert the video into a compatible format for transfer to your iPad.

How can I download video from a Canon Vixia HF M30?

I just purchased a Canon Vixia HF M30. The salesman said I could download into iMovie, but nothing on the instructions say anything about Mac, only Windows. And the cable that connects the camcorder to USB has a message attached to it that says, “STOP! Be sure to install the software from the enclosed CD-ROM before connecting the video camcorder to your computer with this cable.” But the software is Pixela, only for Windows! Solution? (By the way, I have MPEG Streamclip and other converters if that is helpful...)

You don't need to install any software, all you need to do is insert either the SD card or connect the camcorder. I have the same camcorder and what I love most is its solid integration with Mac. My last camcorder did not integrate with FCE but did with iMovie.
These methods work with iMovie and FCE/FCP
Insert SD Card:
1. Just plug it in to the built in port or with a USB adapter.
2. Open the iMovie capture screen or the FC Log and transfer.
3. Select the clips you want and import them.
4. Your done.
USB Cable Method:
1. Plug the respective ends into the camcorder and the computer.
2. Put the camcorder into playback mode and select the Computer option.
3. Open the respective capture tools that were mentioned in the previous method.
4. Import the clips you want.
5. Your done.
Hopefully I was some help. The M30 is a great camcorder.

Down loading video with a Canon XHA1

I have a Canon XHA1 HD camcorder. I had the final cut pro on my I mac set to except the video. I was able to down load my footage. The system went back to standard settings. I don't know which code I put when I try to set the easy settings for downloading video. Does anybody know which video formate do I set in log and capture for me to download my video again?

If you've shot 1080i HDV, set the device control to HDV FW basic, and the capture preset to HDV 1080i...
Jerry

HT3290 how to down load video from sonys dcr trv27 , I hooked up the firewire , also tried connectinf usb at this same time my 2011 Mac doesnt seem to acknowlwdge me hooking up my camcorder , Help !!! stuck

I need help my Sony DVR TRV27 is hooked up to 2011 Mac w Firewire and in addition I also tried USB , I get no response !!! Iphoto , Movie maker I would like to download video to Mac and also be able to do a quick burn on a disk from the cam ! THXS

Hi
A. MUST be via FireWire - Nothing else will work
B. To just get material over to a Playable DVD - Then Use iDVD and Magic iDVD or OneStep DVD function
Else read on
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Capturing AVCHD video from a Canon VIXIA HG21 camcorder to FCE 4.01

Video captured at the highest resolution MXP i60 seems to stutter after importing to FCE 4.01. I know that playback on a computer monitor will show these signs but after burning with iDVD and played on a TV set, it still is jerky when panning a moving image.
I've read most of the posts concerning this. I have read that FCE will only accept 29.97 frame rates in several posts and other posts show "i60 presets support both 60i and 29.97 frame rates".
I read where I should reset my FCE preferences but I don't seem to have any. I looked in Library Preferences and could not find a "com.apple.finalcutexpress.plist" or the "final Cut Express User Data" folder.
Sure could use some help from those who use that camcorder and FCE.

I also shoot and edit with the HG21 but haven't experienced any such problems. Do your sequence settings match your clip settings in every regard? You definitely shot in 60i and not 30p? Did you fully render your sequence before exporting?
I've found there's a lot of interlacing when panning quickly, but it hasn't been jerky for me. Does it appear this way on the camera too? It may have been that you did not pan smoothly enough (such as with a good tripod).

I can no longer import videos from my canon vixia HFS100 into imovie 09

I have had my canon HFS100 for about 6 months. It is listed in the camcorders supported by imovie 09. It worked great but after the last imovie update the camcorder is no longer recognized by imovie. APPLE please fix this bug now!!!! It worked before the update now it doesn't ***. APPLE support please respond to my post with a status on what to do. I see many post about this similar problem.

I strongly believe your AVCHD file structure is corrupt. Or at least no longer compatible with iMovies understanding of how the structure should be. The camera will continue to work, but iMovie will no longer recognise it. I dont think this is a bug in imovie, iMovie is just not user-friendly in this respect, as it does not to tell the user about the problem.
http://discussions.apple.com/message.jspa?messageID=11531525#11531525
After salvaging your footage, you should re-format your memory card to make iMovie accept it again.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

Will imovie 11 (version 9.0.8) be able to import the MP4 files from the Canon Vixia HF R 400?

I realize the camcorder is just available now but I assume the MP4 files are the same as in the R300 from last year. I just want to be sure that imovie 11 will be able to import andedit the MP4 files from the canon Vixia before I purchase the camera.I understand that imovie has trouble with some MP4 files and works fine with other ones. I don't want to transcode into another format and generate gigantic files of data. I also understand that the videos with AVCHD has better video but I prefer a easier workflow. I imagine one day Apple in it's infinate wisdom will eventually support AVCHD.

jerry kaplan wrote:
… I would love to see an article explaining these real world differences and suggestions on which to use. …
two options:
• not exhausting - go to
http://help.apple.com/imovie/cameras/en/index.html
these devices are tested by Apple 'bout functioning with iM
choose one = works. guaranteed.
• exhausting - learn about codecs, containers, bitrates .....
in short: AVCHD is a standard, details e.g. here at wiki
standard means: some settings are conform, some not. example: no 120fps in AVCHD.
note: there's vers1 and there's a new vers.2 .......
mp4 - just a container, or 'wrapper'.
means: like a box of chocolate, you could never know what's inside. example: 120fps in mp4.
but ........
AVCHD nor mp4 are 'codecs'.
here comes h.264 - could be in a AVCHD/mts, could be in a mp4.
iMovie: respects standards.
does NOT import non-standards-conform files/videos/datas.
encode a 1080video as 30p/h264 = would 'fit' into AVCHD
encode a 1080video as 60p/h264 = would 'fit' into AVCHD2 (=not supported by iM11), would 'fit' into mp4 (= iM11 supported) ...
mp4 is more ... 'open minded', more general; lacks therefor stuff like gps location data and other meta-tags.
the next iM13 should support AVCHD2, it's bigger brother FCPX does .....
last word:
iMovie is NO general 'cuts all movin' pictures'-app!
it is meant for consumer convenience with consumer devices.
=> supports the most 'popular' standards. not anything.

Can't Import video from my Canon Z25

Hello experts, thanks if you read this! I'm new to iMovie HD, and I just bought a 4 to 6 firewire to try and import some of my video from my Canon Z25. But of course iMovie won't recognize it (no camera attached).
Is there anything to be done, or is my camera simply incompatible?
Thank you!!!!
--Brian S.

Hi -- thanks for all the responses so far, everyone!
First of all, my camera is a Canon ZR25MC. I didn't get the model number right the first time.
Second, I still can't get iMovieHD to recognize it. I've done everything -- sut everything down and start up again, reset the clock on my camera, check to see if it's listed in Apple System profiler. Nothing changes. I dunno -- maybe my firewire connector is bad -- but it's brand new, from Apple.
Any suggestions? Maybe I'll call Canon.
Thank you!

How do I down load pictures from Camera Roll that were

How do I down load pictures from Camera Roll on my iPhone to my Mac Pro that were taken prior to iCloud?

Photos/videos in the Camera Roll can and should be imported by your computer as with any other digital camera. This was the same prior to photo streaming with iCloud and remains the same since.
With a Mac, you can use iPhoto for the import which also supports iCloud photo streaming, or the Image Capture application.

How do I down load video I shot with my iPhone to my computer

How do I down load video I shot with my iPhone to my computer

iOS: How to transfer or sync content to your computer
"You can import photos or video taken or saved on the iOS device. Information on importing photos and videos is available in the iPhone User Guide. You can find additional information on importing your photos from your iOS device in this article.
Note: You cannot transfer photos that you synced to your iOS device from another computer. You can only transfer photos or videos that you took or saved on the iOS device."

My down loaded videos only have sound on my car player

MY DOWN LOADED VIEDOS FROM I TUNES WILL NOT SHOW A PICTURE ON MY CAR VIEDO PLAYER, ONLY SOUND . BUT THE VIEDO
PLAYS OK ON THE I POD TOUCH.

How are you outputting the video to the car player?
Did it work before?

Down loading video from a canon vixia hf s 21 camcorder

Similar Messages

Maybe you are looking for