Down loading video to iMac
Hi
This is a bit hard to explain but I have an old Sony camcorder with video out and I want to get it into my iMac. The iMac has firewire but the camcorder only has a connection that looks like end on a oblong box with one side (one of the longest sides) slightly bent in, I hope you understand, and would you know if a cable called "9Pin to 4Pin IEEE 1394B Bilingual Firewire " will work?
I live out in the sticks in Spain and it is impossible to get any sort of cables so I have to sen away for them, so I need to know I am sending for the right ones.
Thanks
Amazon UK ships to Spain.
Take a look at this cable for £3.62
http://www.amazon.co.uk/IEEE1394-FireWire-Digital-Camcorders-Cameras/dp/B002S4OH OG/ref=sr13?ie=UTF8&qid=1290355203&sr=8-3
Similar Messages
-
How do I down load video I shot with my iPhone to my computer
How do I down load video I shot with my iPhone to my computer
iOS: How to transfer or sync content to your computer
"You can import photos or video taken or saved on the iOS device. Information on importing photos and videos is available in the iPhone User Guide. You can find additional information on importing your photos from your iOS device in this article.
Note: You cannot transfer photos that you synced to your iOS device from another computer. You can only transfer photos or videos that you took or saved on the iOS device." -
Got a new video camera for Christmas, Samsung HMX-F80, it down loads pictures just fine, but videos I just can't get it to down load. I was able to down load to my PC part no problem.
MY Imac, System 10.5.8, Imovie 8 (7.1.4). Do I need to upgrade? Or what.
Any help is appreciated.Is it listed here?
iMovie 8 Camcorders supported:
http://support.apple.com/kb/HT1014 -
Down loading video with a Canon XHA1
I have a Canon XHA1 HD camcorder. I had the final cut pro on my I mac set to except the video. I was able to down load my footage. The system went back to standard settings. I don't know which code I put when I try to set the easy settings for downloading video. Does anybody know which video formate do I set in log and capture for me to download my video again?
If you've shot 1080i HDV, set the device control to HDV FW basic, and the capture preset to HDV 1080i...
Jerry -
Down loading video from a canon vixia hf s 21 camcorder
I have a canon vixia hf s 21 camcorder and I can not figure out how to down load the videos to imovie.
To get answer faster, ask this question in iMovie community.
https://discussions.apple.com/community/ilife/imovie
Best, -
I Cannot down load movies off the net, why is that
Download from where to where where on the iPod?
What exactly happens when you try to play them?
What is the format of the videos?
What did they come from?
iTunes: Frequently asked questions about viewing and syncing videos
iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
Yo are really not giving enough info to help you. -
I have down loaded finding nemo and monsters inc as a bundle but the nemo is coming up saying "could not load video" can someone please help thanks
Hello Amanada,
Thank you for contacting Apple Support Communities. Without knowing exactly what happens when you are trying to play Finding Nemo, I would suggest starting by redownloading the movie, something might have been damaged during download.
iTunes 11 for Mac: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12283
Regards,
Jeff D. -
My down loaded videos only have sound on my car player
MY DOWN LOADED VIEDOS FROM I TUNES WILL NOT SHOW A PICTURE ON MY CAR VIEDO PLAYER, ONLY SOUND . BUT THE VIEDO
PLAYS OK ON THE I POD TOUCH.How are you outputting the video to the car player?
Did it work before? -
How to down load videos on file on my comuter to my ipad using itunes
with the new itues,how do I down load movies on file in my computer (which I got from Grabiod) down to my ipad?
Nothing to download.
Import the content to iTunes and sync it to the iPad, this assumes the media is in a format supported by iTunes and the iPad. -
I need help my Sony DVR TRV27 is hooked up to 2011 Mac w Firewire and in addition I also tried USB , I get no response !!! Iphoto , Movie maker I would like to download video to Mac and also be able to do a quick burn on a disk from the cam ! THXS
Hi
A. MUST be via FireWire - Nothing else will work
B. To just get material over to a Playable DVD - Then Use iDVD and Magic iDVD or OneStep DVD function
Else read on
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited. No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W -
Down loading video into photoshop elements 9
I'm all set to do this just how
is this done? I have the camera beside me, a USB
cable set to go. How do I set this up??I guess you are trying to import the videos from the camera into Elements.
Just connect the camera to the PC using the USB cable. From the Windows Autoplay Entry, select the Photoshop Elements. In the resultant Downloader window click Get Photos.
This will get your photos and videos in Organizer.
BTW, can you please confirm the version 9 of PSE that you are using as the only latest version available till now is PSE 8 ?
Thanks/ Tarun -
How to down load videos to my pc from palm pree
need to know how to download a video that i recorded on palm pre to pc
Post relates to: Pre p100eww (Sprint)Hello!
Plug your phone into your computer and select USB drive. This will make you phone like a USB stick. Open the Palm Pre drive on your computer and then open the DCIM folder. From there, you will see your vids and pics to copy/paste to your computer. Like any USB storage device, be sure to properly eject it. -
HT5731 how do i down load videos and app. on to my ipodnano
How do i download videos and app to my ipod nano?
You should post in the ipod nano forum
-
the above question
Open the system menu via Alt+Space and see if you can resize that window.<br />
If that works then close Firefox to save that setting.<br />
See also http://kb.mozillazine.org/Resizing_oversize_window<br />
Window sizes and positions are stored in [http://kb.mozillazine.org/localstore.rdf localstore.rdf] in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder].
* http://kb.mozillazine.org/Corrupt_localstore.rdf -
2 part question - I just tried down loading a load movie from my cannon power shot to my power book w/ iphot 5. I've never had trouble with this b/4. Usually the photos down load, and the movies are included with the "roll". Why would the movie NOT complete a download on the power book with iphoto 5?
When I tried down loading to my imac (w/ iphoto 2) the movies do not down load at all. Is this because I need to upgrade iphoto in the imac?Hi RAL,
1. If the movie file is larger than what a 30 second movie then iPhoto will choke on it I have found. I started using Image Capture to download the larger movies from my Canon camera. I actually like having the movie files in my Movies folder because they are easier to backup to disc this way.
Using Image Capture to download images and video clips:
Open up Image Capture which is found in the Applications folder.
When it is opened, go to Image Capture/Preferences
Under the General button choose
Camera: When a camera is connected, open Image Capture.
The next time you connect your camera Image Capture will open.
In the window that opens you will see an Options button. Click on that button to set your options.
To find out more about Image Capture (it can do a lot more) Click on Help in the menu bar when Image Capture is open.
iPhoto: How to Change the "Open Automatically" Preference
If you find you can't change any of Image Captures preferences or can't access any drop down menus or they are greyed out, check to make sure Image Capture is loose in the Applications folder and not within a sub folder.
You need to have iPhoto 5 to download movie files with iPhoto. Use Image Capture on your iMac to download the movies.
Lori
Maybe you are looking for
-
How to avoid purchasing multiple things that are the same but different titles
How can I avoid purchasing multiple things that are the same but have multiple names but is the same purchase for the same use?
-
has any one gotten alchemy installed in windows 8 x64 yet I tried but either I get an error that says to clear out my temp files and reboot my comp I dl a version 1.43.25 but it said there was a newer version and it would exit but I haven't been able
-
Greek Character Display Problem
Hi Server Side : We are using Oracle 8i . Database Character Set = UTF8. Client Side: Windows XP. Modified Control Panel->Regional Settings -> Advanced->Language for non-unicode program = Greek. Changed Alter session set NLS_Language = GREEK When we
-
SQL query concat - numeric or value error
I am getting numeric or value error when concatenating sql script.. Here is the sample, I have in the stored proc.. firstpart:_ works fine if I comment the secondpart:_. (I modified the query because I am posting in the public forums) V_SAMPLEQUERY V
-
Need APEX document for learning practice
Hi All, I am new user in Application Express and i want to create a web application for our day to day job. Data Should be in column: Serial Number, Analyst Name (Multiple), Date, Customer Name, Status (Pending or completed) Buttons - submit, cancel