Down Payment Clearing push button not showing in MIRO

Dear SAP Guru,
I already activated "LOG_MMFI_P2P" using SFW5. Now we are getting Down Payment option in ME21N but we are not getting down payment push button in MIRO.
We are doing in that way:
First we created PO. We do not provide any down payment in the time of creating PO then we post the down payment using f-48. MIGO has done.
Now we are doing MIRO but Down Payment Clearing push button is not appearing. Please help me.
Best Regards,
Shoyeb

Hi,
Do check you had entered the down payment category and down payment percentage in PO.
Do follow the correct steps for down payment and check again if your are getting message in MIRO , then you should get the down payment push button also.

Similar Messages

Down Payment clearing push button in MIR7

Dear Gurus,
Hi.....
I have created a PO for goods and for freight there is a separate vendor. For this PO i have created Down payment request for goods and down payment request separately for freight vendor also. Now, i have posted the down payments and i have done MIGO.
When i am doing MIR7, down payment clearing push button is appearing for goods vendor but where as it is not appearing for freight vendor..
Can u please suggest how to achieve this down payment clearing push button for the freight vendor?
Best Regards
Paresh Kumar G

There is no such provision in down payment where you can specifically pay to Freight vendor. You normally create down payment on the Down payment % that is allowed and entered in PO header under Payment Processig tab. The down payment will only consider the Basic price. It will not include Taxes and delivery costs conditions.
Due to the same reason, Down payment clearing option will not appear if you perform Invoice verification for Planned Delivery costs conditions in MIRO. But if you collectively perform Invoice verification for Goods and Planned delivery costs then you will get the said option in MIRO.

Error -Account 'Down-payments clearing account' could not be found for area

When I am trying to pass a down payment entry by debiting vedor and crediting bank with asset it is giving an error as follows.
Account 'Down-payments clearing account' could not be found for area 01
Message no. AU133
Please help me to rectify the same.
Thanks in advance
Deepak

HI
Please pay attention at the possible causes of message AU133:
1. Error AU133:
   a) You have not defined a contra account for acquisition value postings in the Asset Accounting Customizing settings (Transaction AO90).However, this is required as of Release 4.6C because, as is the case for all other integration postings in Asset Accounting, invoice receipt postings have to be displayed in Asset Accounting via the new posting kernel to ensure an identical document
structure.
   b) You have defined the account in Asset Accounting, however, it is not created in the affected company code.Check whether the account is correct and create it for the company code, if necessary.
2. You have entered an asset reconciliation account for the "Contra account: Acquisition value posting" (for example, the same account as for   "Acquisition:Acquis. and production costs" account).This is not permitted.Check whether your account determination is correct
   (Transaction AO90) in Asset Accounting Customizing. The same applies
   for the 'Contra account: Down payment posting'.
3. As "Contra account: Acquisition value posting" you entered an asset G/L account. If necessary change the automatic posting indicator in the G/L account master record.
4.Check if you need revaluation accounts in depreciation areas involved   (AO90):
-Revaluation acquis. and production costs
-Offsetting account: Revaluation APC
Please run also programm RACKONTO where missing or wrong customizing
the accoutn determinations per company code is displayed
Also have a look at note 7595 in this regard.
Please assign points if it useful.
Regards
Ravinagh Boni

How to get the pop up of Down Payment Clearing while posting an Invoice using MIRO tcode

Hi,
I am having a requirement where I need to display the Down Payment Clearing pop up.
Scenario: While posting an Invoice, user have to check whether he had done any downpayment for the Purchase Order, if so, then there will be a Information displayed saying "Down Payment for Purchase Order xxxxxxxxx exist". Then user has to click the Down Payment Clearing button in the header level, then a pop up window is displayed.
But now my requirement is when the Information Message is displayed, if I click enter button to goto next screen, that time itself I need to display the Down Payment Clearing pop window, rather than clicking the down payment clearing button in the header level.
Kindly suggest any user exit or badi to do this customization
Thanks & Regards,
Karthikeyan G.

Hi,
At the time of entering the invoice from MIRO/FB60, system gives a pop-up for downpayment clearing. If you go in the help, the following thing is mentioned in the part Procedure.
Procedure
Check whether a transfer posting or a clearing of special G/L transactions (for example down payments) is necessary after you have posted the present document.
Here SAP has clearly mentioned that we can do the clearing after posting of this document.
Regards,
Amit
Edited by: amit kulkarni on Nov 13, 2009 2:53 PM

KO88:Not possible to post down payment clearing. There are no down payments

Hi,
We are doing Full Settlement of an order in TCode KO88. There are few Down payments against a PO. Initially, system gave an error as follows: -
You cannot post comp.retirement for asset 120002 0 with this trans.type
    Message no. AA341
Diagnosis
    A down payment was posted to asset 120002 0. In depreciation area 01, if
    not elsewhere, all down payments were not cleared.
Procedure
    Before posting a complete retirement on this asset, you have to first
    clear the down payment in all depreciation areas.
We cleared the down payments and ran KO88 again, but a new error popped as given below.
Not possible to post down payment clearing. There are no down payments.
    Message no. AA571
Any help will be acclaimed.
Regards,
CMC Team
Edited by: CMC Team on Jan 18, 2012 2:59 PM
Edited by: CMC Team on Jan 18, 2012 3:01 PM

Friend,
Probably you did not take the trouble to search the SAP Oss for notes on this error message.
Please search for 'AA571' in the notes section of SAP oss and you will find several notes addressing the exact issue you are having.
For your convenience.
www.service.sap.com/notes
Best regards,
Vishal Thakur.

Not possible to post down payment clearing. There are no down payments:CJ88

Hi Experts,
When I settle WBS Element cost to the Asset Under Construction using transaction CJ88, I receive following error.
AA571 Not possible to post down payment clearing. There are no down payments.
Please help.
Thank You.

Hi,
first please check if the message AA 571 is right:
- Please check table ANLC. If ANLC-KANZA + ANLC-ANSAZ < 0    AA 571
- Check asset values (AW01N, ANEP, ANLC) and find out where the negative down payments come from (tty 180, 181)
However, in some cases a negative down payment balance cannot be avoided (for example through translation differences in foreign currency areas). This is the problem of AA 571. Sometimes it is not justified. For this
cases we have the following note:
860038 Error AA571 not justified
Using SM30, for the T100S table, create an entry for the message
class AA, message number 571, allowed message type "AEW" and
standard message type "E". Select the entry as 'Switch off'.
If when you post to a fixed asset the down payments are negative, or
become negative through the posting, you continue to receive an error as
a default with these changes.
Recommended procedure:
o Change this message to a warning message for one or several
       special users. This user should then be used to post to any such
       fixed asset that has down payments that are already negative or
       become negative through posting.
o This should only be permitted in the cases where a negative down
       payment balance cannot be avoided due to foreign currency
       rounding.
regards Bernhard
Edited by: Bernhard Kirchner on Feb 11, 2011 9:27 AM

Error: Not possible to post down payment clearing.There are no down payment

Hi expert,
I am running a settlement for an internal order and encounter the following error message.
"Not possible to post down payment clearing. There are no down payments."
Message no. AA571
When checked on the vendor, the invoice has been cleared in the same month before the settlement. Under the Internal order line items, there is still an unsettled amount of the invoice.
This internal order settles to an AUC asset. Previous month settlement was ok. Only problem with december.
The downpayment acct is currently zero.
Is there something wrong with the message table, or the posting of the vendor invoice ? Anything to do with the special GL indicator ?
Kindly advise what is the cause and the method to resolved this asap.
Thanks.
Angel.

Hi Angel ,
My client also getting error message while doing settlement(T.C.KO88) even though Note.8600038 applied.
Error Message:Not Possible to post down payment clearing .There are no down payments.
Message: AA571
If your issue is solved.
please can you tell how did you solve this issue.
Thanks,

E not possible to post down payment clearing.

Dear all sap guru's
iam getting this meg:
could you explaine me?
document XXXX E not possible to post down payment clearing. there are no downpayment.
regs
laks

Hi Lakshmi,
Give some clarity for your issue.
Which t.code ur using
and check it downpayment is in the open item or not.
giv me the reply i will update you

How to display the button 'Down payment clearing ' in Billing document

Dear Gurus:
If I used transation code F-39 ,I can do down payment clearing for billing document .But I want to do this in transation code VF01 .
Can any one guide me how to do down payment clearing in billing document.

Could you please share your exactly requirement.
Regards,
Manoranjan.

Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4) after F-48

Hi,
I have tried all sorts of steps, but I am unable to see this Down Payment Clearing pushbutton in MIRO transaction.
Required package - LOG_MMFI_P2P is already installed and found OK in SFW5.
Down payment maintained in PO, request created in F-48 and now I am trying to clear it in MIRO, but this button is not visible.
Any clue?
Please revert.
Regards,
Dipak

Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun Rai

Down Payment Clearing pushbutton in MIRO (SAP ECC6 EP4)

Dear Experts,
As i am trying to do the same process in my organisation to post the DP in PO at header or item level and after that following the ME2DP process for posting DP and then i do MIGO.
After GR as i do MIRO process and select the PO there is no DOWN PAYMENT Push button on header level on MIRO Screen.
I already re-started the Business Function "LOG_MMFI_P2P" after that also it is not showing the push button.
Please kindly help in this to get that DOWN PAYMENT clearing button?
Regards
Arun Rai

Hi,
I just re activated that module function and process this practise in the similar way SAP has guided in its library which i can tell you in the brief. I suppose that way will work for you.
Posting of Down Payment Clearings and Down Payments in Purchase order
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create ->Vendor/Supplying Plant Known (ME21N).
a) In the item details, choose the Invoice tab page. In the Down Payment Category field, choose the Mandatory Down Payment or Voluntary Down Payment setting.
Confirm your entry.
b) Enter an amount in the Down Payment Amount field, or a percentage in the Down Payment % field.
c) Enter a due date in the DP Date field.
d) Save your entries.
2. On the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Reporting ->Down-Payment Monitoring for PO.
3. In the Purch.Doc. field, enter the purchase order number of the purchase order you just created, and enter the appropriate due date interval.
Choose Execute.
4. Select the purchase order you created in the list and choose Create Down Payment Request.
The Down Payment Based on Purchase Orders screen appears.
5. In the group box Execution, choose either Down Payment or Down Payment Request and then choose Continue.
Depending, either the Down Payment Request screen or the Down Payment screen appears.
6. Change the proposed amount to be paid in the Down Payment Amount field and choose Continue.
7. on the subsequent screens (similar to F-47 / F-48), enter the required data and post the document.
Posting of Down Payment Clearings in Logistics Invoice Verification
Preparation for this process:
1. Create a purchase order with one or more items. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Purchasing -> Purchase Order -> Create -> Vendor/Supplying Plant Known (ME21N).
2. Use the Financial Accounting transactions (such as F-48) to create down payments for this purchase order.
3. Post a goods receipt with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics -> Materials Management -> Inventory Management -> Goods Movement -> Goods Movement (MIGO).
Step to follow for Execution
1. Post an invoice with reference to the purchase order you created. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Document Entry --> Enter Invoice (MIRO).
2. Check the invoice items and correct them if necessary.
3. Choose the Down Payment Clearing pushbutton.
4. In the Amount Entered column, enter all the amounts you want to use to clear the displayed down payments.
Save your entries.
5. Post the invoice.
6. Display the invoice document. To do this, on the SAP Easy Access screen choose Logistics --> Materials Management --> Logistics Invoice Verification --> Further Processing --> Display Invoice Document (MIR4).
i Think the way all the process mention here will help to process your requirement becuase this worked for me and i follow the same way. One think which i like to share with you is i assigned the advance payment at document header level.
Regards
Arun

Error - ME2DP Down Payment Clearing error

Dear Experts,
I am using ME2DP T.code to potst the DP request and DP Payment. However the automatic clearing of Downpayment is executing after MIGO instead of at MIRO. My Client wants this to happen at MIRO to have proper control. Please let me know if i have done any configuration error or is there any other steps to perform for automatic clearing of DP at MIRO.

Hi Ravninder
Thanks for your reply. I have created PO in ME21N and mentioned the down payment in PO.
1) ME2DP - Create DP Request - It takes me to F-47 screen to create the DP Request
2) ME2DP - Enter DP - it takes me to F-48 Screen and posted the DP
3) Next MIGO was done
4) After MIGO, it is showing DP Clearing in PO history
5)But it suppossed to be shown in MIRO Screen and it is a latest feature in EHP4.
6) That DP Clearing push button is not appearing in MIRO.
Please let me know how to solve the same.

ME2DP & Down Payment Clearing LIV

Dear All,
I am facing three issues while creating and clearing down payment through ME2DP and MIRO.
1- While clearing down payment in MIRO, system is not clearing FI down payment document automatically. At the time of posting,, system generate two documents, one is Invoice and other is Down Payment.
2- After posting Invoice in MIRO with Down Payment clearing button, Status Red is activated in ME2DP which was green after creating down payment.
3- After executing all the entries from Procure to Payment, there is still Down Payment request outstanding in Purchase Order History.
Waiting for reply!
Regards
AJ

Hi Abdul,
The purpose of using ME2DP is you can enter down payment data in purchase orders at header and item level.
You can use the down payment clearing function to clear down payments that you have posted with reference to a purchase order directly in logistics invoice verification (without going to the relevant financial accounting transactions).
If you perform down payment clearing in logistics invoice verification, when you enter an incoming invoice for a purchase order, the system proposes all down payments that have been posted with reference to the purchase order and that are not yet completely cleared, for down payment clearing. The system posts the down payment clearing document together with the invoice document.
By using ME2DP you can avoid making the down payment clearing in financial accounting as it will get cleared while posting MIRO.
Also, refer this note 1637282
Hope you will get some idea.
Regards
Shashi

Very urgent, vendor down payment clearing - ka doc type

hello gurus,
while clearing vendor down payment, some down payment entries are posted as ka doc type. now i have to clear the invoice down payment with the ka doc type. how to do this.
for retention account we booked in special G now that retention money also paid but that doc is not showing as cleared. still it showing in red colour. but balance is nill. what to do for this..
can anybody help me very urgent friends
thanks
jaya

HI ,
CHECK THI SPROCEDURE ,
DOWN PAYMENT;
Vendor A/C--a DR1
TO Bank
Invoice;
Expence a/c dr
to Vendor----
2
down payment clear:
Vendor A/C-----Adr -
3
to Vendor a/c----4.
Hi once you do the Down payment clearing only 1 & 3 line items will be cleared.
but 2&4 line items will show as open items .
This line items you have to clear .Clear this in F-44.
CHANDRA

WH Tax - Down payment clearing against invoice

Dear Experts,
This is regarding the down payment clearing against invoice where WH tax is involved in Down payment as well as in Vendor Invoice. we also deduct Work Contract Tax Z1 on vendor invoice.
the process is as follows :
Step 1 - Down payment to Vendor through TC # F-48
Entry : Vendor A/c Dr 2200.00
To Bank 2178
To TDS 22.00 @ 1%
Step 2 - Vendor Invoice Booking through TC # FB60
Entry : Expenses Dr 4400.00
To Vendor 4180
To TDS 44.00 @ 1%
To WCT 176.00 @ 1%
Clearing down payment against the invoice posted using FB60.
Step 3 - Down payment Clearing through TC # F-54
Entry : Vendor Dr 1980.00
To Vendor 2200.00
To TDS 44.00
To WCT 176
But in this process, it clearing WCT tax code also which i dont want in this. And if i adjust amount and do not clear whole amount available amount then after simulating it showing difference coming and debit and credit amount of line items.
But if i dont include WCT tax code in whole process then its working fine no problem coming in it, but want it also to include in clearing process of down payment against invoice.
Best Regards
Arun Rai

Dear,
i am following the SAP standard process for deducting TDS on down payment and invoices.
First i deduct the TDS on down payment and Then again full TDS amount on invoice not adjusted it in WHT tab in base amount after adjusting Advance payment.
in next process f-54 i cleared the advance payment against invoice so it reverse the invoice TDS amount to adjust the tds as per advance payment TDS.
In img i confiured the WHT for payment posting as by selecting "Central inv. prop." option in Central invoice option.
Regards
Arun Rai

Down Payment Clearing push button not showing in MIRO

Similar Messages

Maybe you are looking for