Down Payment Order

When tried to post the downpayment order to FI. Following message is received.
You entered a tax code for a down payment or down payment request which is defined as an EC tax code. This is not permitted, since this posting is not subject to EC tax. A tax statement requirement exists upon the delivery of goods to a foreign EC country, but not, however, upon receipt of the down payment.
May I know what can be done here please?

Hi all,
I'm have exactly the same scenario and am getting exactly the same results, trying to get things working with the standard settings first of all:
As an example, I have a Billing Plan at Header Level which has two billing plan items tems (there is only a single order item):
The Net Value is 255.08
Bill Date         DTDS                                        Value   Bill Rule          Bill Status     Date Cat        Bill Type
15.06.2011     0009     Down payment    50.00      5     C     04     FAZ
15.06.2011     0008     Closing Invoice    255.08      3     A     02     F2
My FAZ Bill Doc has been created and the down payment has been posted in F-29 and is therefore cleared. However, when I remove the bill block and create the F2 invoice, based on SAP help I was expected two items, one for 255.08 and one containing the cleared downpayment. However, I only see a single item for 255.08. Condition AWZR is not shown in the pricing either.
I've checked and double checked the confiig settings on the SD side (copy control etc), my FI colleague says things are correct on his side. Am I missing something very obvious here? Should my F2 billing doc contain two items or do I post the F2 billing document and the FI side deal with things?
Any help and advice would be greatly appreciated!!

Similar Messages

ZF2 Invoice Creation for Down Payment Order

Dear All ,
Kindly give me your inputs on the following issue .
1. Sales order - ZOR with net value of 1500.00 with material Item cat - TAO- Milestone-Bill.Plan. In item data billing plan tab , i have maintained Rs 500 as down payment , for billing doc type - FAZ with Rule in billing plan/invoice plan "05" and Date description"0009-Down payment".
In 2nd line i have maintained values for ZF2 customer invoice with Rule in billing plan/invoice plan "05" and Date description"0008-Closing Invoice". with billing block "02" and fpr value RS1000.00
2. I have created FAZ invoice   for Rs 500 and posted the same in F-29 and posted the document .
3. I have created delivery and completed PGI for the same
4. Removed the billing block and tried to create ZF2 customer invoice , the invoice is created with "ZERO" value .
Also tried by changing by Rule in billing plan/invoice plan "03" and Date description"0008-Closing Invoice". with billing block "02" and for value RS1500.00. In this case the invoice is created for Rs 1500.00.
As per SAP Std , while creating ZF2 invoice . TWO line items should created
1. for Rs 500 and another for Rs 1000.00
Note : I have not changed any configuration settings and am using the same SAP settings .
Kindly help me on this issues with your valuable inputs as i need to deliver the same today .
Thanks in advance for all your help.
Regards
Veera

Hi all,
I'm have exactly the same scenario and am getting exactly the same results, trying to get things working with the standard settings first of all:
As an example, I have a Billing Plan at Header Level which has two billing plan items tems (there is only a single order item):
The Net Value is 255.08
Bill Date         DTDS                                        Value   Bill Rule          Bill Status     Date Cat        Bill Type
15.06.2011     0009     Down payment    50.00      5     C     04     FAZ
15.06.2011     0008     Closing Invoice    255.08      3     A     02     F2
My FAZ Bill Doc has been created and the down payment has been posted in F-29 and is therefore cleared. However, when I remove the bill block and create the F2 invoice, based on SAP help I was expected two items, one for 255.08 and one containing the cleared downpayment. However, I only see a single item for 255.08. Condition AWZR is not shown in the pricing either.
I've checked and double checked the confiig settings on the SD side (copy control etc), my FI colleague says things are correct on his side. Am I missing something very obvious here? Should my F2 billing doc contain two items or do I post the F2 billing document and the FI side deal with things?
Any help and advice would be greatly appreciated!!

Creation of A/R Down Payment Invoice based on Sales Order not logical

When creating a A/R Down Payment Invoice based on a Sales Order you
have the option to create multible ones. Which by itself could be
usefull to create one of 50 % for a certain day and decide they need to
pay another 25 % at a later date.
But SBO does not track what already have been posted. Therefore you can
create a sum more then a 100% without warning or blockage.
Tested this in SBO 2007 A SP:00 PL:00
Scenario:
Sales - AR>Sales Order
Create and post a Sales Order
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 40%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 100%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 70%
Post the A/R Down Payment
Making the total for the Sales Order 210% worth of Down Payment
Invoices without warning/blocking. I would expected that you would only
be able to set the rest sum %. For instance first scenario I entered
60% therefore setting the second Down Payment Invoice to a max of 40%
Untill you have used up the 100% and you cannot select the Sales Order
in question..
If multible users do the same work, SBO doesn't show that it has
already been done. Same if you forgot you already created it you can
still create one. Plus sometimes it will happenyou create the Down
Payment Invoice and not paying attention you create the first one with
a 100% and later with the intended percentage..

Hello Petronella,
you are right that B1 is not checking the total value of DP created from the Sales Order.
The logic and checking procedure here is only between Sales Order -> Delivery/Invoice.
DP Invoice is considered as transaction related to document the receipt of the money (parallel to the sales process). Between the moment of basing of DP to Sales Order it is still possibility to adjust Sales Order as there is no posting behind Sales Order.
The question is what would be a checking procedure in case that on Sales Order there is based Delivery and DP? What would be the system priority to take into a consideration?
Regards,
Martin Slavik
Regional Solution Manager

Trying to create a query that shows Sales Order/Invoice Totals as well as Paid/Outstanding/Available Down Payments

Currently working on SAP B1 v8.82
I'm looking to generate a query that will give an overall report for a given customer that shows Sales Order No, Invoice No, Sales Order Total, Invoice Total, Amount Paid on Invoice, Amount Remaining on Invoice, Down Payments Available, Open on Sales Order.
I'm not sure what the best way to select the columns in bold above. Invoice Total should be self-explanatory. Amount Paid should be any down payments or applied payments on the invoice. The balance due on the invoice (which seems to be T0.DocTotal if I'm not mistaken) should = 'Invoice Total' - 'Amount Paid on Invoice'. In the Down Payments Available column I want the total amount of money on the account or on down payments that aren't tied to a Sales Order. If a client overpaid in the past for instance and there's a credit on their account, then it should contribute to this sum. Open on Sales Order should be pretty easy. I guess it's just the sum of everything that is still open on the Sales Order. I'm just not sure what the best way to sum all the un-delivered freight, tax, and line items is. Here's what my query looks like so far.
SELECT DISTINCT T4.[DocNum] [Sales Order No],
T0.DocNum [Invoice No],
T4.DocTotal [Sales Order Total]
T0.DocTotal [Amount Outstanding],
FROM OINV T0
INNER JOIN INV1 T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN DLN1 T2 ON T1.BaseEntry = T2.DocEntry AND T1.BaseLine = T2.LineNum
INNER JOIN RDR1 T3 ON T2.BaseEntry = T3.DocEntry AND T2.BaseLine = T3.LineNum
INNER JOIN ORDR T4 ON T3.DocEntry = T4.DocEntry
INNER JOIN OSLP T5 ON T4.SlpCode = T5.SlpCode
WHERE T0.CardName Like '%%[%0]%%'
GROUP BY T4.DocNum, T0.DocNum, T0.DocTotal, T4.DocTotal
I tried doing a little searching around for queries similar to what I need, but I could find exactly what I was looking for and I'm very unfamiliar with OJDT, JDT1, and ITR1 tables which I think might be important to finding unapplied payments...

Thanks. There's a few problems though.
1) It seems that OINV DocTotal != Balance Due. I'm seeing a number of invoices where there was a balance due, but we applied additional money (either we took another incoming payment and applied it or applied money from the account balance, etc.) and yet it still shows a total.
2) It's pulling incoming payments from different customers. I think this is because the table was joined based on "RCT2 T4 on T4.[DocEntry] = T3.[DocNum] and T4.[InvoiceId] = T2.[LineNum]" In one example I have 2 incoming payments 446 and 614. Both have the DocEntry 542, but one relates to A/R Invoice 542 (for a different client) while the other relates to Down Payment Invoice 542. *I was able to fix this by adding WHERE T5.CardCode = [%0]*
3) I'm going to work with this a little bit and see if I can alter it to make it work for me. Basically this query falls a little short on the following:
- Doesn't include incoming payments that aren't linked to a down payment invoice.
- Does not give the Invoice Total (I'd like to know how much of the SO was invoiced. DocTotal seems to give me Amount Invoiced - Down Payments. I'm not sure the best way to get this number. Maybe I could do the sum of each line * tax + freight)
- Does not give the outstanding amount on an invoice. The ARtotal [DocTotal] column gives me how much was owed when the invoice was created, but it doesn't tell me what is currently owed.
- Lastly it may complicate the query too much and could be left off, but it would be nice to see if they have any money from credits or incoming payments that has not been applied. Perhaps this would be easily accomplished by simply pulling in their account balance.

Down payment report by purchase order

Hi,
Is there any report available to see the down payment/down payment requests by purchase order.
I am trying to execute the transaction code ME2DP but it does not exist. We are in ECC 6.
Please note we cannot use FBL1N (noted item/sp GL) as there is no PO in selection.
Regards
Shanif

HI,
You can try using Transaction code: ME2N with Scope of List 'BSET' and Selection Parameter which has option Down payment validation. If such selection parameter is not available in your system than you can create it using below path:-
SPRO - Materials Management -Purchasing -Reporting -Maintain Purchasing Lists -Selection Parameters
Please find below screen shot for the same:-
ME2N
SPRO Path- (Selection Parameters)
Regards,
Anand Raichura

How to change sales order no. in already posted down payment?

A sales order was created and a down payment was also posted.
Later sales order was deleted, but the related down payment still exists.
Subsequently a new sales order was created for the same customer.
Now customer is asking to clear his current sales order against the older down payment (which has reference of the deleted sales order)
An error is getting raised while clearing the sales order and down payment in F-32 as the down payment has reference to deleted sales order.
Now can I change the sales order no. in the down payment document?
or is there any other way to clear these transactions, current sales order and old down payment?

Hi,
Reverse the down payment entry and repost the same with reference to the new sales order number.
FB08 to reverse accounting document.
Regards,
Srinu

WBS & Commitment Code Update in Purchase Order/Down Payment

Sir,
We have created purchase orders by using WBS and Commitment Code and
afterwards, the down payments has been created against the purchase
Orders.
Now we want to change the WBS and Commitment Code in Purchase Orders
and also in Down Payment Request so that the data and reports can be
updated as per the changes.
Pl suggest the way how can we do the same so that our data can be
updated as per the changes in purchase orders.
Regards
Mudit Gupta

Why do you want to change the same now?Has the user entered wrong WBS and Commitment Code?
I yes then cancel the down payment,delete the po & pr...and then through CJ20N create a new automatic pr with correct WBS and Commitment Code.
Regards,
Indranil

Purchase order down payment non editable

Dear experts,
Our business requirement is after the release of purchase order system should not allow the user to change the down payment amount or percentage. I checked the screen layout of purchase order but I di not found any field related to down payment.
Assist me how to handle this issue.
With Regards
Uday

Hi,
For simple solution, please find below which I tested.
Once PO released, change release indicator to 1.
Once you done this and after PO release, system gives below message. System not allowed to change ANYTHING in PO with ME22N. Or else you can set any other relevant change indicator suits you.

Down payment issue against sales order

Hi
I have some down payment of 100000 and it is to be executed in 20 parts against a sales order. there was some error in the payment processing and while debugging we have posted some five of above payments as cleared although there was no clearing documents aginst these five. Now my balance due is giving incorrect amount. I want to move these wrongly cleared item in uncleared list, reversal can't be done as this is having other 15 parts.Any best way to reinstate mentioned 05 parts as uncleared.
Thanks

But my document is not having any clearing documents and it can't be reset by FBRA, these documents get posted by mistake , while debugging from SD side , so any idea on it ?
Thanks
Deepak

Invoice Purchase Order with Down Payments brings wrong Due Amount

Hello,
I am working on 8.81 PL08 environment and I have this situation:
I issue a Purchase Order and then a Down Payment Request which I pay. When I go to invoice the purchase order the down payment and payment due fields on the invoice are correct.
In the case I issue another down payment request and for the same Purchase Order which closes the amount of invoice then when I go to the invoice and choose Copy From the same fields are not right.
If I go to Purchase Order and choose Copy To the amounts are correct.
So the situation is like this:
- Down Payment part of Purchase Order. Due Payment to invoice correct
- Down Payment full amount of Purchase Order. Choose Copy To from Purchase Order to Purchase Invoice. Due Payment correct.
- Down Payment full amount of Purchase Order. Choose Copy From from Purchase Invoice. Due Payment wrong.
Has anyone seen this before?
Thank you,
Gerasimos

Thank you Gordon,
However I cannot deny to the user that wants to apply that that there is a business case where the vendor demands the invoice to be paid all in front (maybe one installment with the Purchase Order and one with the Receipt of the Goods). So, I would expect this to be covered.
I noticed another thing: When I opened the Down Payments screen on Invoice (where Down Payments are listed in order to choose them) there is a column "Open Net Amount" which brings the correct amount. However, in the column "Net Amount to Draw" there is a wrong figure and that makes the mistake.
Now I can see that I can wright the correct amount to column "Net Amount to Draw" but still I cannot understand why a user should do that.

Unable to change make a down payment using Purchase order

Hello Experts,
I created a purchase order and used that purchase order in f-47 and f-48 (created down payment for the P.O).
When i tried to execute the good receipt i encountered an error that said profit center not mentioned in line item 001. I understood that the profit center was not given in the material masters. I tried to give the profit center in the material masters. However, it says that there are purchase orders existing and cannot save for that reason.
Now i am unable to delete the Purchase order and the material masters is not saving because the p.o is existing. I am not able to come out of this.
Any help is highly appreciated
Regards
Raghuveer

Hi
If you have stocks you cannot change the profit center. The only way I can think of is to write a substitution rule to populate the profit center, so that you can do the GRN. You will have to do a profit center substitution probably by reading the plant.
Another way is to set the message MM335 in T Code OMT4 as a warning and than try updating the profit center in material master itself.
Thanks & Regards
Sanil Bhandari

Steps to cancle Purchase order after down payment made to vendor ?

Dear Group members
Warm greetings !!!!!!
One of my user made down payment to vendor on the base of Purchase order issued, now the vendor is not able to supply the goods & finally (Returned) refunded the amount & canceled the PO
How can i process this in SAP
As in Purchase order, history for Down payment is reflected. Transaction code ME23n
Finance don't want to reveres the down payment made which is made in the month of Jan & cleared from bank a/c
Pleas advice some me with some other solution
Thanks & regards IN advance
Regards
Shamul heq

Hi ,
Clear the advance payment made with the incoming payment from Vendor. this wil make the down payment at PO level Zero you can close the PO after that..
try out the same in test system and move to production after that.
rgds
Murali

Vendor down payment request to MM purchase order

We want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
Thanks
Martien
Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

Dear Martien,
we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
We are doing a workaround:
We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
If you find a other solution, so please tell me.
Best regards.
Manuel

Down payment request to the purchase order as a whole for f-48

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Actually looking for any screen exit is available for that or any other way.
Regards
RK

Check for FI user exits in this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
Check also this links
USer Exit / Badi F-47 & F-59
http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

Down payment request to the purchase order as a whole

Hi Gurus
I want to post vender down payments request and make the relation with the purchase order.
Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
Regards
RK

Hi
Actually looking for any screen exit is available for that or any other way
Rgs
RK

Down Payment Order

Similar Messages

Maybe you are looking for