Down payment request based on purchase order

Dear all,
How to make down payment request(F-47) based on purchase order(not line item wise) ?,
Currently in F-47 it is asking to enter amounts purchase
order line item wise,because downpayment is made only for entire purchase order value not line item wise.
How to solve this issue ?
Jeyakanthan

Hi,
This is SAP standard functionality. you have to specify line item, though you specify line item system will check for whole PO. and while posting invoice you will get information of the down payment.
Regards,
Raj

Similar Messages

  • Vendor down payment request to MM purchase order

    We want to post vender down payments request and make the relation with the purchase order.
    Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
    As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
    Is it possible to link the total amount of the down payment request to the purchase order as a whole, so without the line item numbers.
    Thanks
    Martien
    Edited by: M. van den Eshof on Mar 12, 2010 1:10 PM

    Dear Martien,
    we have had the same problem here at our company. In ECC6.0 we haven't found a solution for this.
    We are doing a workaround:
    We post the down payment request only on one, the main item in the purchase order. But this causes negative effect on cash management.
    If you find a other solution, so please tell me.
    Best regards.
    Manuel

  • Down payment request to the purchase order as a whole for f-48

    Hi Gurus
    I want to post vender down payments request and make the relation with the purchase order.
    Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
    As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
    Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
    Actually looking for any screen exit is available for that or any other way.
    Regards
    RK

    Check for FI user exits in this link
    http://wiki.sdn.sap.com/wiki/display/ERPFI/UserExitsin+FI
    Check also this links
    USer Exit / Badi F-47  & F-59
    http://wiki.sdn.sap.com/wiki/display/ABAP/Find%2bApplication%2bclass%2bwith%2bExits%2band%2bBadis%2bfor%2ba%2bTransaction
    Edited by: Jeyakanthan A on May 25, 2010 1:03 PM

  • Down payment request to the purchase order as a whole

    Hi Gurus
    I want to post vender down payments request and make the relation with the purchase order.
    Up to now the systems ask for the purchase order number (mandatory) and the line item number (mandatory)
    As we have with our customer PO's with sometimes more than 100 line items, we do not want to relate down payments request for every PO line item.
    Is it possible to link the total amount of the down payment request to the purchase order as a whole(we can say as Header), so without the line item numbers.
    Regards
    RK

    Hi
    Actually looking for any screen exit is available for that or any other way
    Rgs
    RK

  • Down Payment Request for a Purchase Order Type K

    I am making a down payment request to a supplier where the purchase order is of type K.
    At the time of recording the payment request (A-47) the transaction meets the cost center of the purchase order and, because of having a message class (KI 281), blocks the release.
    The question is:
    At present the validation of the message class (OBA5) should validate the account of the purchase order or the supplier's account of the F-47?
    Rgs,
    Ivair

    Hi
    KI 281 message says that the GL account has to be created as a cost element. So, please create a cost element for the GL you are using (KA01). Hope this is the problem.
    If this does not work, please let me know.
    Thanks,

  • Creation of A/R Down Payment Invoice  based on Sales Order not logical

    When creating a A/R Down Payment Invoice based on a Sales Order you
    have the option to create multible ones. Which by itself could be
    usefull to create one of 50 % for a certain day and decide they need to
    pay another 25 % at a later date.
    But SBO does not track what already have been posted. Therefore you can
    create a sum more then a 100% without warning or blockage.
    Tested this in SBO 2007 A SP:00 PL:00
    Scenario:
    Sales - AR>Sales Order
    Create and post a Sales Order
    Sales - AR>A/R Down Payment Invoice
    Create an A/R Down Payment
    Select the BP and copy the Sales Order
    Set DPM to 40%
    Post the A/R Down Payment
    Sales - AR>A/R Down Payment Invoice
    Create an A/R Down Payment
    Select the BP and copy the Sales Order
    Set DPM to 100%
    Post the A/R Down Payment
    Sales - AR>A/R Down Payment Invoice
    Create an A/R Down Payment
    Select the BP and copy the Sales Order
    Set DPM to 70%
    Post the A/R Down Payment
    Making the total for the Sales Order 210% worth of Down Payment
    Invoices without warning/blocking. I would expected that you would only
    be able to set the rest sum %. For instance first scenario I entered
    60% therefore setting the second Down Payment Invoice to a max of 40%
    Untill you have used up the 100% and you cannot select the Sales Order
    in question..
    If multible users do the same work, SBO doesn't show that it has
    already been done. Same if you forgot you already created it you can
    still create one. Plus sometimes it will happenyou create the Down
    Payment Invoice and not paying attention you create the first one with
    a 100% and later with the intended percentage..

    Hello Petronella,
    you are right that B1 is not checking the total value of DP created from the Sales Order.
    The logic and checking procedure here is only between Sales Order -> Delivery/Invoice.
    DP Invoice is considered as transaction related to document the receipt of the money (parallel to the sales process). Between the moment of basing of DP to Sales Order it is still possibility to adjust Sales Order as there is no posting behind Sales Order.
    The question is what would be a checking  procedure in case that on Sales Order there is based Delivery and DP? What would be the system priority to take into a consideration?
    Regards,
    Martin Slavik
    Regional Solution Manager

  • Help Needed with creting down payment request without tax from order

    Hello,
    We are trigerring a down payment request from sales order. There is no tax to be collected on down payment. When the billing document is created SAP copied over tax elements from order and posts a relevant tax code on the down payment billing document. How can we force a zero tax code on the DPR billing document?

    Hello Pankaj,
    I think you don´t want to determine any tax condition?
    Try to assign requirement 84 to your tax condition(-s) in the pricing procedure. This requirement helped me not to determine
    other condition types in the down payment billing document.
    If you just want to determine a different tax code the solution could be to define a new table (key kombination) in the access sequence assigned to your tax conditions. That new table could include the billing type in additional to other criteria and can help you to determine a different tax code with otherwise identical parameters.
    Hope this helps.
    Regards
    TDI

  • Down payment of assets with purchase order

    Hi All,
    Down payment made through F-48 against  asset purchase order
    When purchase order number is entered,it is picking the Asset number  and it is capitalising at the time of down payment.
    i have gone through the Sap Note number 310368 in detial and have completely tested it out,but still it is throwing the Error F5378.
    i have Changed the field status variant in OBC4 and the posting key 39 and 29. the Error message has been changed to warning messsage as prescribed in the sap note.
    But still not able to overcome the problem.
    thanks in advance
    Regards
    Prashanth

    Hi Prashanth,
    Please check the config in the following path:
    Financial Accounting (New)> Asset Accounting> Transactions>Acquisitions>Define transaction types for acquisitions>Select transaction type for Down payment> should be UNTICKED capitalise fixed asset check box
    Regards,
    Babjee

  • Error when posting Down payment with reference to down payment request

    Hi Experts,
    In October of 2010 we upgraded from version SAP 4.7 to version 604 SAPKH60406.  
    With this upgrade we decided to select the following FM setting:
    "Flag to activate down payment request update to PO history"
    If this flag is set, down payment requests are updated to the purchase order history. In addition, when you create a down payment referencing this down payment request , the down payment request is cleared by the down payment.
    Use- Set this flag if you want to see the down payment requests  in the purchase order history.
    So, since October 2010, the Down payment requests have been updated to the PO history (note - no update of the down payment request was made to the PO status tab) and the down payments (made with reference to the down payment request) have been clearing the DP requests.
    Today we have applied packages SAPKH60407 - SAPKH60409 and we are in the process of testing. 
    Now we are experiencing errors when processing down payments:
    1. create the down payment request (F-47) - this is OK
    2. create the down payment (F-48) with reference to the down payment request - ERROR MESSAGE F5373 - "Order value will be exceeded"
    Can anyone please explain why this is happening?  We would like to keep the "Flag to activate DPR update to PO history" ON
    as it has been since October 2010.
    Thanks,
    Michelle

    Hi,
    Please find the below link it will help full for you,........
    Order Value will be exceeded Msg No. F5373
    Naresh

  • Fund center & commiitment items not getting copied to down payment requests

    Hi
    When we create a down payment request against a purchase order , the Committment item and fund center are not getting copied from the Purchase order.
    kindly provide suitable solutions.
    Regards
    Suresh A

    Hi,
    Check note 52903...
    Regards,
    Eli

  • Down payment request for asset-based Purchase order

    Please Help!
    I have a PO for an Asset for 10000$. down payment need to be paid for $5000.
    I went to f-47 to create down payment request BASED ON PO and there is no field to put the PO number.
    What am i missing? Is there config need to be done? or anyting on the PO need to be checked?

    Hi
    Look for 'Purch. Doc.' field. If not, check the field status in OBC4 and OB41
    Thank You,

  • Down payment request for PO

    Hi Guru's,
    Can anyone tell me the down payment process for Purchase order in SAP.
    We have a PO which we need to make payment 50% advance and 50% after 30 days.
    a. All configuration did for MM and FI
    b. Payment term
    c. Down payment request
    d. Down payment
    Thanks in advance
    Deepak

    Dear Anand,
    Thanks for your reply. But my query is not that.
    Down payment request should be generated subsequent to purchase order creation.
    a. Kindly confirm whether it is manually(if so request you to provide TCode other than F-47) to be created from MM Module.
    b. How to automise the payment request subsequent to purchase order.
    Please help and points will defnitely be assigned.
    Thanks
    Deepak

  • Payment transactions applied to down payment requests cannot be reconciled

    Help
    See the scenasrio:
    A customer added sales order( SO-123) of Amount 100000 dated 23/08/2009, Than request for advance INR 100000( 100 %)
    from customer and added A/R down payment request( Based on S0-123) dated 24/08/2009, Customer argree to give advance,
    So user added Incoming payment dated 25/08/2009 and received INR 100000. Now delivery( based on SO-123) happend on
    date 26/08/2009, And A/R Invoice added on date 27/08/2009. Since customer already paid said A/R Invoice amount
    through A/R downpayment request and Incoming payment on dated 25/08/2009, Now How to close the A/R Invoice
    I already tried with business partner ledger and manually reconcile the incoming payment with his invoice,
    than this giving error
    Payment transactions applied to down payment requests cannot be reconciled here   [Message 3821-19]
    Regards
    Arun K Singh

    Hi Heather,
    I have found the same problem too.
    In SAP Business 2005A, we allow to do Internal Reconciliation on this Downpayment Request with 100% and the Invoice.
    The only differences is this Invoice with status Closed.
    But In SAP Business 2007A, we not allow to do Internal Reconciliation on this Downpayment Request with 100% and the Invoice.
    The only differences is this Invoice with status Open compared in 2005A.
    I have checked in both version 2005A and 2007A Journal Entry, there is nothing wrong on it.
    Why this happen in version 2007A?
    Hope Jitin can answer our Question.
    Best Regards,
    danny

  • CO Object Assignment Error while posting Down Payment Request

    User is raising a Down Payment Request for the purchase of an Asset  through a Purchasing Document. This Asset Master has got the cost center and WBS Element assigned in it.
    System while saving the DP Request is throwing an error that “CO Account Assignments has different Profit Centers”
    I have also checked the cost center master but the profit center assigned there is correct only. Should I check the OKB9 settings ? If yes, for which GL Account do I need to check ? Where else can I check the CO Object Assignments for profit centers ?
    Requirement is critical. Please help.
    Thank you
    Ravi
    9849393564

    Hi,
    Good evening and greetings,
    Please have a look in GGB1 (Profit Centre Substitution), there may be some rule which is overriding the OKB9.
    Please reward points if found useful.
    Thanking you,
    With kindest regards,
    Ramesh Padmanabhan

  • Down Payment Request Percentage affects tax

    Hi Experts,
        I have an issue to be cleared in A/P Down Payment Invoice.
    Scenario:
    Purchase Order has a certain tax amount in addition to the total value. I try to add a A/P Down Payment invoice for this order. When the DPM is changed to a particular percentage, the tax value also changes (reduces) to the DPM % as it happens to the order value.
    My requirement is that the DPM % should affect the order value alone and not the tax.  I tried changing the No of Instalments too. Can any one suggest me a solution?
    Regards,
    Madhavan

    Hi,
    In the down payment invoice the tax also will be calculated, this is system behaviour.
    You can use the outgoing payment
    ->Select vendor
    ->Check the option payment on account(At bottom of outgoing payment)
    ->Rt. click payment means and book the advance amount
    _->If you are using 2005B link invoice option can be used
    _->If you are using 2007 applied transaction can be used
    for linking the advance with the invocie

Maybe you are looking for