Down State stays after back button pressed on browser

I have built a Navigation Bar in Dreamweaver CS5. I want the nav images to indicate what page you are on by showing the down image state. This is a check box within the Navigation options "Show 'Down Image' initially". This works fine on all pages as long as you use the buttons to navigate, but when you press the back button on the browser (safari & firefox), the page that you have just come from also stays in the down state, affectively showing 2 down states. Has anybody had a similar problem and can help.

Hi
This is standard behaviour with browser back buttons, if the page is in the browser cache they will display the page in the same state as the cached page.
PZ

Similar Messages

On certain websites, my own, that use flash the pages do not work if you use the back button in the browser. They have to be refreshed before any of the links will work again. Very frustrating.

When I am browsing my own sites (2 of them) which are built in Flash, everything is fine following the links on the pages. But if I hit the back button in the browser, the pages freeze up and none of the links work anymore. If I refresh the page, then the links work fine.
This does not happen on Safari as after pressing the browser back button, all is well.

Dear jscher2000, thank you for your response! I'm running 16.01 version, so the 3.6.20 version isn't the correct one. I've updated it yesterday.
I also have to mention that today everything seems to work just fine! :) I don't experience the problems anymore and all links work again just normally, eventhough I'm logged into Facebook account. Maybe it was just a temporary bug.
I couldn't say what was the reason to that solution, but I'm glad there aren't problems anymore with Mozilla.
Thank you again and best regards,
Nina

How to go to previous page in task flow using 'BACK' button in the browser?

Hi...
I have created system using ADF application that can detect 'BACK' button in the browser(e.g. firefox and google chrome).Everytime i click the 'BACK' button in the browser,it will prompt out message that ask user whether want to 'stay in the current page' or 'leave the page'. Once i click 'leave the page' it will take me to the login page.
Is there any possibility for go back to previous page in task flow when user click on browser's back button? By the way, the task flow is in the page fragment.
can anyone tell me how to do it?Need this step urgently..
Thanks in advance.
Edited by: 942376 on Jun 22, 2012 11:03 PM
Edited by: 942376 on Jun 22, 2012 11:07 PM

Can you send that code to have a look ? Share it on some site

Urgent ...problem with back button in my browser

hello,
i created one login.jsp file and wellcome.jsp file and one logout.jsp file and one login controleservlet.If i login once i got wellcome page.In that i have logout button, and if i will click that button
it will display logout successfully message on browser.my requirement is that after i will get logoutsuccessfully message i want to avoid back button in my browser.if i click back button then it will display an error message like "your session expire".
please send the reply as soon as possible.

I'm not certain of whether you want to disable the back button in the user's browser or you want to avoid this error message...
Assuming you want to avoid the error message entirely, I would set a variable in the session scope when the user logs in and any time you don't see that when you process a request in your servlet, redirect the user to the login page.
If you're looking to simply disable the back button in the browser, beyond asking the user nicely not to click the back button, good luck to ya. :)
Hope this helps!
- Kyle

There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.

I've had several users complain of receiving this message after they have filled out and submitted a form.
There was an error communicating with the server. Click on the back button in you browser and try resubmitting the form.
However the data is being saved in forms central. I can't duplicate the issue on my end but it seem to be happing frequently with other users.

Do you mind emailing the URL of your fillable form to me ([email protected]).
I would like to investigate as to what the issue might be with Internet Explorer.
Sorry for the inconveniences.
Gen

Is there any way to disable the back button of the browser?

Hello,
I dont want to cache some pages in my application so that they will not get back when back button of the browser is clicked.
Is there any way for that?
I also want to know if the back button can be disabled.
thanks in advance
vakvarma

Eh, What's happening to this forum. I read the thread, and clicked back, and got this:
alTextPo 2000 sition)); else setUI(new CloseableTabbedPaneUI(horizontalTextPosition)); } /** * Allows setting own closeicons. * @param normal the normal closeicon * @param hoover the closeicon when the mouse is over * @param pressed the closeicon when the mouse is pressed */ public void setCloseIcons(Icon normal, Icon hoover, Icon pressed) { normalCloseIcon = normal; hooverCloseIcon = hoover; pressedCloseIcon = pressed; } /** * Adds a <code>Component</code> represented by a title and no icon. * @param title the title to be displayed in this tab * @param component the component to be displayed when this tab is clicked */ public void addTab(String title, Component component) {

Enabling Back Button behavior in browser?

How can I allow the back button in a browser to function like
a .html
page in a .SWF?
Thanks in advance.

dzedward wrote:
>
http://www.asual.com/swfaddress/
Thanks for the link. Out of curiosity, is this using a level
of AS3 that
would be way too advanced for a beginner to even consider?

Old values are displayed when i click the back button of the browser

Hi all,
I am having a INPUT screen having 2 textfields and a "Confirm" button. When user enters values in these textfields and clicks on "Confirm" button, another CONFIRMATION page is displayed where these values are just displayed as h:outputText. But when user clicks the back button of the browser previosly entered values are getting displayed in the INPUT screen. My question is how to remove these values or set to null on click of the Back button of the browser?
Thanks in adv.

Hi,
i believe this should handle the browser. For instance, you have to tell him with meta tags, not to cache the website. Until yet I didn't succeed in doing so!
With kind regards,
Lutz Steinfeld

View State Animations & the Back button (on Android)

Hello, everyone!
Is it possible to animate between view states when developing for mobile devices (like Android)?
And if so (and the bigger question for me), when you transition from one state to another, can you use the Back button on the Android device to transition back to a previous state?

Hi, Jason,
First and foremost, thank you for your timely response, and for your well-received advice!
After reading the posts from the MAX Beta link your provided, it is my understanding that if you disable the default back button handling, that the button itself would no longer function in the application.
I still want to use the back button, but I want to add the back button's popView function to states as well as Views.
If I missed anything, please let me know.
And thank you, once again!
PS-I don't know if this makes a huge difference, but I'm using the latest pre-released version of Flash Builder 4.5 with AIR 2.6 (released 2 weeks ago).

Why the Fibre uplink ports are down state even after giving no shutdown command at the interface

Hi
My Predecessors brought 2 CISCO 3750 switches and implemented LACP on these core switches. Due to looping in the network the Fibre uplink ports GigabitEthernet1/1/3 and GigabitEthernet2/1/3 are down (I think these uplink ports are mirrored in the LACP concept)
Please see below from the configuration.
I logged into the core switch and went to this particular interface GigabitEthernet1/1/3 and I gave the following command and still the port is in the down state after I gave no shutdown command. Do I need to give the same no shutdown command at interface GigabitEthernet2/1/3 as well ?
Switch-Core1(config) interface GigabitEthernet1/1/3
Switch-Core1(config-if)#no shutdown
Switch-Core1(config-if)#
Please see below After no shutdown command given still these 2 Gigabit fibre uplink ports are down.
GigabitEthernet1/0/20 unassigned YES unset up up
GigabitEthernet1/0/21 unassigned YES unset down down
GigabitEthernet1/0/22 unassigned YES unset down down
GigabitEthernet1/0/23 unassigned YES unset down down
GigabitEthernet1/0/24 unassigned YES unset up up
GigabitEthernet1/1/1 unassigned YES unset up up
GigabitEthernet1/1/2 unassigned YES unset up up
GigabitEthernet1/1/3 unassigned YES unset down down
GigabitEthernet1/1/4 unassigned YES unset up up
Te1/1/1 unassigned YES unset down down
Te1/1/2 unassigned YES unset down down
GigabitEthernet2/0/1 unassigned YES unset up up
GigabitEthernet2/0/2 unassigned YES unset up up
GigabitEthernet2/0/3 unassigned YES unset up up
GigabitEthernet2/0/4 unassigned YES unset down down
GigabitEthernet2/0/5 unassigned YES unset up up
GigabitEthernet2/0/6 unassigned YES unset down down
GigabitEthernet2/0/7 unassigned YES unset down down
GigabitEthernet2/0/8 unassigned YES unset up up
GigabitEthernet2/0/9 unassigned YES unset up up
GigabitEthernet2/0/10 unassigned YES unset down down
GigabitEthernet2/0/11 unassigned YES unset down down
GigabitEthernet2/0/12 unassigned YES unset down down
GigabitEthernet2/0/13 unassigned YES unset down down
GigabitEthernet2/0/14 unassigned YES unset up up
GigabitEthernet2/0/15 unassigned YES unset up up
GigabitEthernet2/0/16 unassigned YES unset up up
GigabitEthernet2/0/17 unassigned YES unset up up
GigabitEthernet2/0/18 unassigned YES unset up up
GigabitEthernet2/0/19 unassigned YES unset down down
GigabitEthernet2/0/20 unassigned YES unset up up
GigabitEthernet2/0/21 unassigned YES unset down down
GigabitEthernet2/0/22 unassigned YES unset up up
GigabitEthernet2/0/23 unassigned YES unset down down
GigabitEthernet2/0/24 unassigned YES unset up up
GigabitEthernet2/1/1 unassigned YES unset up up
GigabitEthernet2/1/2 unassigned YES unset up up
GigabitEthernet2/1/3 unassigned YES unset down down
GigabitEthernet2/1/4 unassigned YES unset up up
Te2/1/1 unassigned YES unset down down
Te2/1/2 unassigned YES unset down down
Port-channel1 unassigned YES unset down down
Port-channel2 unassigned YES unset down down
Please let me know if I am doing something wrong .Please post me some tutorial to sort this.

It is possible you are overloading that little 4215. If that is the case you should also be seeing "missed packet percentage" messages in your events.
How much traffic is your 4215 getting? Those sensors will start to drop packets for inspection at about 30 Mb/s.
- Bob

How do I turn off the drop-down menu on the back button?

I use a laptop and my hands aren't too dextrous. Every time I click the "back" button I get the drop down menu, which means I then need to move my hand back to the pad (slowly!) move the pointer, and try again. It can take me several attempts to go back one site now!
I have searched for hours to find out how to turn this drop down menu off, to no avail, and even looked through all the settings in about:config in an attempt to find a way around this. It seriously impacts my ability to use my laptop on the web now, so if anyone can please come up with a way to get back to the old back button, with no menu when my slow old finger cannot move fast enough to get off the button, I would be very grateful.

You can use that list and open the previous tab just above the one that appears bold and has a bullet.
The current active entry has a bullet in front of it.<br />
If you hover an entry in the tab session history list with the mouse then you see an arrow at the left side pointing left (Back) or right (Forward) to show the direction.<br />
You can left click an item to open it in the current tab or middle-click or Ctrl left-click an entry in that list to open that link in new tab, just like you can with other links.<br />

How to resubmit the form when back button pressed

Hi,
In my application, iam implementing searching,
when i submitting the form, i got some records and i navigated all the results through next and previous buttons.
Problem occurs when i clicked on back button, it is showing "page expires and asking for resubmit the data".
How can i show the previous page, when user clicked on back button.
Iam using struts 1.0 and ibatis
Please help me out.
Thanks in advance,
Mohan

Hi mohan,
try to store your search indices in a vector and put that vector in the session scope. at page first loading you get the first index from your vector and pass it in the request scope in your action class, due to the page you have to find a way to understand the passed index in request scope and translate it to the searched word location.really I have not a code sample, but it is just an idea.
feel free to ask me.
Thanks.
Ahmad Elsafty

Clicking on the Back button in web browser does not take you back properly

When using Info View and drilling down through reports (using the InfoView Portal in the "View my documents" settings of User Preferences), if you have drilled down through several reports and then want to go back to the page you were viewing before you drilled down one more layer using the browsers BACK button takes you back a random number of pages - NOT back one page.
Is there a fix or workaround for this?
Thanks

>
Tim Simon wrote:
> Which type of report is this? A Crystal Report (not sure what your question means)
>
There are some big differences if using say a webi report.
I just tested on XIR2 SP4 and back forward worked fine with CR drilldown, using the sample reports.
Could be a report design issue or something wrong with your deployment, maybe even a browser setting (not sure as I don't work reporting issues too often).
You can wait to see if someone else has run into this or open a message with support to have an engineer take a look.
Regards,
Tim

How to work with Back Button of Web Browser for Flex Application

Hi...........
I am developing a Web Site for that I have created 10 MXML Components for 10 links I am using ViewStack in Home Page and I added the 10 components to this ViewStack and I am using 10 links for 10 Components
My problem is that When I am going through links it's fine but in my Web Browser I am not getting Back Button enabled for previous page to go
Please help me..............................

Hi,
Here a Flex3 example:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"
     layout="absolute"
     creationComplete="initApp()">
     <mx:Script>
          <![CDATA[
               import mx.events.BrowserChangeEvent;
               import mx.managers.IBrowserManager;
               import mx.managers.BrowserManager;
               import mx.utils.URLUtil;
               public var browserManager:IBrowserManager;
               private function initApp():void {
                    browserManager = BrowserManager.getInstance();
                    browserManager.addEventListener(BrowserChangeEvent.BROWSER_URL_CHANGE, parseURL);
                    browserManager.init("", "Shipping");
               private var parsing:Boolean = false;
               private function parseURL(event:Event):void {
                    parsing = true;
                    var o:Object = URLUtil.stringToObject(browserManager.fragment);
                    if (o.view == undefined)
                         o.view = 0;
                    tn.selectedIndex = o.view;
                    browserManager.setTitle((tn.selectedIndex == 0) ? "Shipping" : "Receiving");
                    tn.validateNow();
                    var details:Boolean = o.details == true;
                    if (tn.selectedIndex == 0)
                         shipDetails.selected = details;
                    else
                         recvDetails.selected = details;
                    parsing = false;
               private function updateURL():void {
                    if (!parsing)
                         callLater(actuallyUpdateURL);
               private function actuallyUpdateURL():void {
                    var o:Object = {};
                    var t:String = "";
                    if (tn.selectedIndex == 1) {
                         t = "Receiving";
                         o.view = tn.selectedIndex;
                         if (recvDetails.selected)
                              o.details = true;
                    } else {
                         t = "Shipping";
                         o.view = tn.selectedIndex;
                         if (shipDetails.selected)
                              o.details = true;
                    var s:String = URLUtil.objectToString(o);
                    browserManager.setFragment(s);
                    browserManager.setTitle(t);
          ]]>
     </mx:Script>
     <mx:TabNavigator id="tn" change="updateURL()" width="300">
          <mx:Panel label="Shipping">
               <mx:CheckBox id="shipDetails" label="Show Details" change="updateURL()" />
          </mx:Panel>
          <mx:Panel label="Receiving">
               <mx:CheckBox id="recvDetails" label="Show Details" change="updateURL()" />
          </mx:Panel>
     </mx:TabNavigator>
</mx:Application>

Using the Back Button in the Browser

Does Anyone know how to do this, I have tabs on my homepage,
and I want to be able to have it so that if the user goes to a
different page from the tabs and then hits the back button they
will still have the tab that they were just looking at to show.
Right now, dreamweaver makes me have a default tab. Here is my
homepage just to give you an example of the tabs I am talking
about:
http://content.aktion.com/newsletter/aktionweb/aktionhome2.html
Let me know if you need more information about what I am
trying to do. I appreciate any tips. Thanks

> Does Anyone know how to do this, I have tabs on my
homepage, and I want to
> be
> able to have it so that if the user goes to a different
page from the tabs
> and
> then hits the back button they will still have the tab
that they were just
> looking at to show. Right now, dreamweaver makes me have
a default tab.
> Here
> is my homepage just to give you an example of the tabs I
am talking about:
Your browser's back/forward buttons are 'page' based.
Tabs ON a page are often javascript based, and are not seen
as individual
pages by the browser.
Your option would be to turn the javascript based tabs into
page based tabs
forcing a new page request when switching between tabs. That
may or may not
be desirable for your needs.
-Darrel

Down State stays after back button pressed on browser

Similar Messages

Maybe you are looking for