Downgrade treo 755p to 600

I need to get my data from a a Treo 755p into a Treo 600.
755 Desktop crashes the 600. I tried exporting from the 755 desktop, but the 600 desktop won't see the files to import Contacts or Date Book. 
Thanks! 
Post relates to: Treo 650 (Sprint)

Hello shawej and welcome to the Palm forums.
I don't have my Treo 600 charged up right now, but have you tried IR beaming the data from the Treo 755p to the Treo 600?
Alan G
Post relates to: Treo 755p (Sprint)

Similar Messages

  • Sync Treo 755p with Mac address book and ical

    I just bought a Treo 755p Verizon.  I loaded in the Palm software, but it does not sync with the mac address book.  I don't want to have to re-enter 600 contacts.  How can I get Palm and Mac address book to talk to each other?
    Post relates to: Treo 755p (Verizon)

    Well, I got some good news for you.  I just synced my Treo 755p with my Macbook Pro using both the palm sync and isync.  It synced both my iCal & Address book. It has to do with the conduit setting in the palm sync manager.  Here's what I did...try it and let me know.
    I downloaded the latest version of the Palm Desktop (although I do not use it)
    Then, at the top of the page of the Palm Desktop go to "HotSync" then to "Conduit Settings"
    Then highlight "iSync Conduit" by clicking on it and press the big square button at the top called "Conduit Settings"
    Then check the box :enable isync for this device"  Then click OK.
    This did it for me....It's syncing with my ical, addressbook, etc.
    Let me know if this helps!!!
    Thanks for yours!!
    Billy Bob 
    Post relates to: Treo 755p (Sprint)

  • Hot Synch does not work, Treo 755p, USB, 17" Mac Pro Laptop, even with RevD installed and Allow other HotSynch applications preference check box checked

    Hi,
    I am a long time Palm enthusiast who is frustrated.  No more Palm products for me or anyone I speak to until I solve this problem.  Someone at Palm should be paying attention to their long time cusotmers.  I bought Palms in 2002 and 2003.
    The support literature coming with two Treo 755p that I bought was so poor that never saw the fine print that there was three months of support if I registered the devices.  The registration page does not let me register.  All the fields are ghosted after I put in the serial number.  I bought one in June 2008 and the other in early 2008.  So never registered and can get no help from Palm now it seems.
    So beside that gripe below is the problem issue info.
    I can't get a Verizon Treo 755p to USB cable Hot Synch with my daughters 17" Mac Pro Laptop.  It is using OS 10.5x  She lives in another city so I am trouble shooting this remotely.
    Did - Revd Palm upgrage has been installed.
    PalmDesktopMac421Revd.dmg (17MB)
    http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=4518,E=0000000000255177998,K=6239,Sxi=3,case=obj(33...
    Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications.
    That process worked however on my own Treo 755p Verizon as below:
    After much work, hours over several months, I got my my Treo 755p Verizon to Hot Synch with a QuickSilver desk top Mac running os 10.5x. 
    Did the RevD upgrade.
    Did in advanced settings on the Treo select in the Synch preferences allow other Hot Sync applications.   Otherwise the Wireless Synch feature prevents a Hot Synch.
    Once those both were done than Hot Synch works fine, and Wireless Synch works fine and does not interfere.
    The Wireless on both PDAs is scheduled to be removed on both Treos due the economy on Feb. 4th, so I would like the HotSynch to be working so her Treo is backed up.
    Thanks so much to anyone who replies to help out.
    Best
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)
    This question was solved.
    View Solution.

    Works now, she had created a user ID as prompted when installing the HotSynch Software, but it was not the same name of the Treo 755p.  The default ID was the one she from installing the software, so it showed nothing in address or contacts, but when she switched to the Treo ID than all her stuff was there.
    Post relates to: Treo 755p (Verizon)

  • Open Letter to Palm Regarding the Palm Treo 755p

    Dear Palm,
    As a devoted Palm user for the past 15+ years, I have been praising the versatility, convenience and user friendly Palm hardware/software to my colleagues and family for as many years. As a result many have purchased Palm products and have come to rely upon them as much as I do.
    Recently I finally gave in and took the leap to consolidate my multiple media devices (laptop: email, phone: calls, Palm TX:notes,passwords,video,books,spreadsheets,contacts,calendar,etc.) into one unit with the Palm Treo 755p. I HAVE NEVER BEEN SO DISAPOINTED IN A PALM PRODUCT! After transferring all of my info from my TX to my 755p, and activating the phone itself, I began the process of setting up my VersaMail account to enable me to sync my work email through the Exchange ActiveSync program. In typical Palm fashion, it was fairly easy to set up once I had obtained the necessary info from my IT department and I was soon getting my email in the Palm of my hand (pun intended). All was well! Or so it seemed...
    Shortly after getting everything set up, I contacted my Dr. to set up an appointment later this month, and, in typical fashion, I opened my Palm Desktop Manager to update my calendar with the appointment so I could sync it up with my Palm during the next HotSync. After performing the HotSync, I realized that not only did the appointment NOT transfer from the Palm Desktop, ALL of my personal contacts and calendar events had been forced into my work email account!! I immediately became alarmed because I do not want my personal life (i.e. Dr. appointments, church activities, etc.) advertised to those whom I have granted rights to work on my work email account when requested to do so. I immediately sought out help from the Palm.com help forums and found that MANY people were experiencing the same problem. I performed all of the tricks that I could find (erasing everything, reloading software, hard resets, etc.) but no luck; I could not keep my personal information (contacts & calendar) in Palm Desktop and use my VersaMail for just that - MAIL. After researching further, I found that when using either the Exchange ActiveSync setup or the GetGood program, that the user is forced to surrender all options related to how the calendar and contacts are handled - DESPITE the options built into the program that indicate otherwise. I have since removed all email synchronization accounts from my 755p and have been attempting to re-establish the ability to successfully HotSync my calendar and contact information with the Palm Desktop Manager. I am also working with my IT department to see about the possibility of establishing a POP3 account for my work email - which in my opinion is a completely inferior option; in addition to being most likely unavailable despite the fact that many in the company of 60,000 employees are now facing the same problem with their own Palm Treo devices
    - I now have a phone/PDA that does not do what it was advertised to do.
    - I have lost my confidence and faith in Palm (this did not come lightly; I have been attempting to work through this issue for the past two weeks in all of my spare time).
    - I am still unable to successfully HotSync my contact/calendar info with the Palm Desktop Manager (despite hard reset on the phone & no associated email accounts on the phone) & it does not indicate why (it does not revert to "do nothing" in the manager as it did previously).
    - I have no way to check my work email account remotely.
    - Unfortunately because of schedule limitations I do not have the time to sit on the phone with Palm Tech Support, I have been completely unsuccessful in launching the technical support chat program, and I have been unable to find any type of email address where I could express my concerns in a more professional manner, rather than airing this over a worldwide forum.
    Does anyone have any advice, knowledge, fixes, hacks, etc. that can help? I really don't want to lose the investment (time and financial) I made in this upgrade, and I REALLY do NOT want to move over to the dark side (Blackberry).
    Most of all, and scoff/call me old fashioned all you want, I do not want to give up on Palm. I still feel that they are a good company that cares about their customers and provides (for the most part) a quality product and I would prefer to give them the brand loyalty I have for the past years, and hopefully many to come.
    This is my first time using this venue to communicate with Palm, I have selected to be notified if there is a reply to this message as I prefer not to leave my personal contact information in this open forum. I am looking forward to hearing from you [Palm] to see what can be done to address my concerns.
    Sincerely,
    Chad B.
    Post relates to: Treo 755p (Sprint)

    Ridius,
    Success! Wow, what an endeavor! I had already tried using the HotSync troubleshooting before I turned to the forums so as I expected, I was unable to find a resolution there. Here's what I did next:
    • Before using the Registry Fix utility, I exported all of my "good" files (memos, contacts, calendar, tasks) from my TX. I then wiped everything from the Treo 755p through another hard reset.
    • Downloaded the Registry Fix utility, erased all existing profiles on my computer, re-downloaded the Palm Desktop Manager v6.2.2 and installed it over all existing Palm software on the computer
    • Performed an initial HotSync and then tested each feature (contacts, memos, calendar, tasks) one at a time with a HotSync in between each one. Success!
    • I then went through and instead of loading the profile from my TX, I obtained the most up to date software versions of the most often used additional programs and loaded each one, one by one & performing a successful HotSync each time before moving on to the next.:
    o MegaLauncher v6.44
    o Agendus for Palm OS Standard Edition v12.04
    o Documents To Go v8.002
    o CacheMate v4.1.2
    o A new-to-me program called Passwords Plus v1.006 since my old "Secret" program was obsolete and I could not find an updated version.
    o MiniTones 0.1b (for Palm OS)- just found this a few days ago and it is the greatest for using MP3's on your SD card for ringers, plus its free!
    o I was unable to find an updated version of Big Clock and I refrained from loading the previous versions after reading that it has been known to cause crashes on newer Palm OS. (darn! The price was right; free, and it was an excellent program too!)
    So far I have been able to perform successful HotSync’s every time with only one consistent error each time (even before the additional programs were loaded):
    "Backed up some files successfully to Treo 755p's Backup folder
    •Duration: 7.6 seconds
    •Failed to backup 1 file(s)
    •PmTraceDatabase
    •Protocol Error: Handheld file could not be opened. (4004)
    •SYNCERR_FILE_NOT_OPEN"
    Any ideas here?
    I have not yet attempted to do anything with my work computer yet, it will take a while to get the IT department to update Palm Desktop Manager to v6.2.2 on the company servers and I feel this was one of many critical updates leading to the fix that ultimately resolved my problem.
    All in all, this experience & working with you has renewed much of my faith in Palm – I am only hoping that I can find similar success with the one issue that started all of this (i.e. upgrade to a all-in-one device, time/financial investment, 2+ weeks of troubleshooting & wasted effort, etc.); the need to keep my personal calendar/contact info OUT of my company email/files, while at the same time having the ability to use the Exchange ActiveSync program to view my work email only. Most likely this will require a lot more finger crossing and outcry from the public. For the sake of myself, the many other users of the Palm Treo 755p within my company of 60,000 and those going through the same issue all over the world, I hope that the wait is not too long.
    Most of all, I want to thank you for your assistance, kindness, and dedication to providing exceptional service to me and the thousands of others that you have helped directly & indirectly through this and other threads. Whether or not you are able to help me with resolving the last HotSync issue listed above or not, you have been nothing short of amazing and will have my continued vote of confidence in your abilities. I can only hope that those current leaders within the Palm organization will take the time to review this and so many other threads that you have participated in to see what a quality employee you are, so that your talents can be put to use in leading others to follow in your footsteps.
    Sincerely,
    Chad B.
    Message Edited by Erevu on 02-03-2008 12:01 AM

  • Looking for the "good" calendar - Treo 755p

    Last week my Treo started cycling through the reset screens (Access and Palm). I tried soft resets and warm resets until I couldn't stand it anymore, and finally did a hard reset, wiping everything.
    I spent the next three days testing how things worked and restoring apps one at a time, finishing Monday afternoon.  I needed to add a few appointment and realized they all had an alarm on them.  I went to the Preferences menu, and I don't have the checkbox to cancel this feature/bug.
    I chatted with someone named "Silas" on the HP Live Chat yesterday, but he didn't understand what I was asking and told me that another hard reset would fix it.  I don't want to waste three more days.  Is there a way to get the "right" calendar app?
    Any help will be appreciated!
    Post relates to: Treo 755p (Verizon)

    applications>calendar>week

  • Photos taken on my Treo 755p are not syncing to my computer.

    Photos taken on my Treo 755p are not syncing to my computer, while the rest of the sync process performs flawlessly. The photos used to transfer to the 'Palm' folder under 'My Pictures' on Windows XP. The transfer used to occur with no problem...but I'm currently not having any luck. I went so far as to backup my Palm files, delete the Palm Desktop software, re-install it and then HotSync the new software with my phone. Does anyone have any tips???
    Your help is much appreciated!
    Thanks!
    Drew
    Post relates to: Treo 755p (Verizon)

    Do you have a media section of the Palm desktop? Is there anything in there? Are the pictures on a SD card or the device? 
    Post relates to: None

  • Windows Vista 64 bit and Treo 755p

    Hello,
    I am wondering if the latest software update will allow me to sync using HotSync and a cable.  When I got my 755 it said that it was not compatible with my new computer that has the 64 bit Vista.  Is this going to be fixed eventually or should I just give up and sync onto another computer with XP?  Thanks.
    Post relates to: Treo 755p (Verizon)

    Obviously this is one of the strangest anti-business responses from a for-profit company I have heard of, but I can't even get the bluetooth workaround to work because as soon as I start to install the setup, it immediately stops and says it was interrupted.  This was a clean install of Windows Vista 64 Business, with no antivirus software running (or even installed yet).  I downloaded the install software yesterday, even tried downloading it again to make sure.  I even tried loading prior versions of it, all to no avail.  They simply will not install saying they got interrupted.  If there is some magic to allow this to work, my wife and I would be quite grateful.  If not, hello blackberry!  Palm is forcing my hand here and running off a loyal customer that has bought one of (almost) every model since the original palm pilot, lo those many years ago.
    Does anyone have a solution to the "installation was interrupted" issue on Windows Vista 64 ?
    Post relates to: Treo 700p (Sprint)
    Message Edited by jshoffit on 08-06-2008 10:04 PM

  • IPhone 3G replaced Treo 755p

    I have been watching this forum ever since the iPhone 3G became available. I just wanted to post my story on why I chose the iPhone 3G.
    I am in IT, a Database Administrator and Designer. I bought my first smartphone, a Treo 700p in 2004, in the quest for mobility, tethering, better e-mail accessibility and the internet in my hand. The main goal was to find a way cut the shackles to my desk and to carry less crap throughout the day. My computer bag is upwards of 35 lbs.
    After having the Treo 700p, then upgrading to a 755p, I have been quite happy with Treos to this point. Unfortunately the Palms are being discontinued, putting me in the market for a new smartphone of sorts.
    I checked out the original iPhone a year ago and loved how user friendly it was, but is still lacked a few things I needed. When I saw the next generation 3G offering a few of the capabilities my Treo had I was very interested.
    Knowing the iPhone 3G was not a true smartphone, but its pretty darn close to one. I ordered my 3G a week after the initial wave started and was put on a Customer Fulfillment waiting list. I then learned so many people were having issues with the iPhone 3G, I cancelled my order and decided to wait. I saw some of the issues people were complaining about in the display units. Once the 2.0.1 update was released, I noticed the performance was a little better.
    Last Friday, the 2.1 release was out and I heard it took care of many of the issues people were having. The display units in the store were performing better also. Still annoyed I couldn't tether the 3G to my laptop directly of via bluetooth, the strong internet capabilities were enough to offset how often I needed to tether.
    Its been 6 days, and I have put it through the ringer and have been very surprised with how well its performed. Getting it home I had to do a hard reboot, then do a full restore which loaded the new 2.1 software. In order to maximize my battery life, train the battery and the power management software, I made sure I ran the battery all the way down right out of the box. I then let it charge overnight and day 2 i ran it all the way down again, charged it overnight again. Battery life sucked for the first day, but got better each day of the week. I met a guy that also had a 3G who gave me a few tips to save battery life.
    First he suggested turning Wi-Fi off if its not needed, Second turn off the GPS locator, and third turn off push and set fetch for 1 hour.
    Well, I left 3G on (I'm paying for 3G and I'm going to use it), turned off Wi-Fi and use it only when I surf the net in a Wi-Fi hot spot, turned off the GPS Locator, this is a feature I will least likely use, and I left Push "on" on 2 e-mail accounts, because its necessary. In this configuration, I now get a full days use out of it with moderate talk time without any problem. I charge it in the morning, then when I go to bed. If there are days where I will be on it more, I will charge it at my desk or in the car, which is no more than I used to do with the Treos.
    Now in comparing where I get a signal to the Treo is interesting. The Treo rarely let me down and usually had a signal when no one else had one. Everywhere so far, I have been able to get a signal in the same areas as I did on the Treo. I buddy of mine who lives out in the wooooods and normally can't call out on any cell phone, he was able to reach me from the deep woods Sunday on his new 3G.
    I use my 3G to access my web based database applications, which was my original intent on getting the 3G. I can now update , query and edit information in my database, standing in a mechanical room directly from the iPhone. I can then send a report or an email if necessary, then get a response as I'm walking back to my office. Its just super slick. I'm also designing some SDK applications to run my stuff on the iPhone.
    With the 2.1 update, exchange and e-mail push, multiple calendar management, contact list sorting, smooth backup with Mobile Me, exceptional web capabilities and the best user interface out, it outshines my Treo 755p. Mariner Software is coming out with something that will allow reading, creation and editing of Excel and Word documents. That will be the last of what I will need to make it a true hand held computer. The Treo did allow me to read and edit, but I couldn't create.
    In summary, I am happy with the new iPhone 3G and it is making my work day a heck of a lot more efficient. It does 95% of what I need it to do. The iPhone 3G frees me up from carrying my laptop all day.
    I would gladly give up some slimness for a bigger battery. Sorry Apple, the Treo's camera took much better pictures. The 3G camera should be much better for a multimedia device of this caliber.
    In my opinion, battery life is not as bad as an equally used smartphone. The iPhone does a lot, as with any smartphone you have to manage what you are using vs. what you really need at times to maximize battery life. Although the 3G is not a smartphone, it's more of a Mac Ultralight than it is a simple phone or plain iPod. BTW the keyboard does get easier to use over time.
    Sincerely,
    Dave
    Birmingham, AL

    The retail sales price for a new iPhone 3G has not changed (and the first generation iPhone is no longer sold by Apple), so an exchange under warranty has no affect on the original retail sales price for the iPhone, or the perceived or real value when selling an iPhone used to someone else - the price someone else is willing to pay for a used iPhone.

  • How do I transfer contacts from Treo 755p to Treo Pro?

    Hello Everyone,
    I am the new owner of a Treo Pro!  So far, so good except for the fact that I cannot figure out how to transfer my contacts from my old Treo 755p to the Pro.  Can anyone help?
    Post relates to: Treo Pro T850 (Sprint)
    This question was solved.
    View Solution.

    supertrace wrote:
    just upgraded from a centro to a treo pro and before i activate the new phone i want to verify i can transfer my info over.
    the user manual states
    If you’re switching from a previous Windows Mobile® device or from a device
    using Palm OS® by ACCESS, you can learn how to move content to your
    Treo Pro smartphone by going to palm com/support
    how am i able to sync the info currently in palm desktop by access to the treo pro ?
    Post relates to: Treo Pro T850 (Sprint)
    As stated in a previous post above, you will need to change Palm Desktop's sync settings to Microsoft Outlook. 
    The Treo Pro uses Microsoft Windows Mobile as its operating system, and is designed to sync with Outlook, and not Palm Desktop.
    If you don't have a copy of Outlook on your computer, then it will have to be purchased.
    There is a "switch" in Palm Desktop that will tell your old phone to start syncing with Outlook.  Start Button/All Programs/Palm/PIM Conduit Sync/Sync with Outlook.  Once you've activated this switch, all your data will migrate to Outlook, and the Pro will automagically find it there when you do your first ActiveSync.
    WyreNut
    Message Edited by WyreNut on 03-22-2009 09:35 AM
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm Desktop - Can download but can't access Palm Desktop for Treo 755p

    After 6 months of use, no problem with my Treo.  Last week my Palm Desktop won't let me access into it.  Have uninstalled/installed at least 6-7 times each.  Desktop downloads onto computer fine but I only see the front "page" if you will.  Keep getting this error ...
    Microsoft Visual C++ Runtime Library ... Runtime Error! ... Program C:\Program Files\Palm\Palm.exe ... This
    application has requested the Runtime to terminate it in an unusual way.  Please contact the application's support
    team for more info.  
    Have tried everything to override this error.  Installing, uninstalling, disengaging antisoftware, spoke with Palm Support via Live Chat (my analyst Vivian there was really helpful and tried but still stuck with same problem), have researched
    forums, the net, my how to guides, everything.  But no luck.  Someone suggested to try a different desktop.  Have researched that but can't even get into my App to see which version I have cause I'm locked out of it.  I have
    Windows XP Home SP 2 OS, Treo 755p Palm OS Garnet v.5.4.9.  I don't use the Treo as a phone, mostly as a
    portable PDA so only USB connection to computer.  I am not tech savvy.
    Post relates to: Treo 755p (Sprint)

    Thank you Pat for all your help.  Your advice worked.  A dash shows the specific folders and keys I located on my computer (for those reading this and have exact same problem, you might have same and/or the other keys).  I trust you gave all variable folder and key names. It worked perfectly the first time.  
    I had not made a backup or rename of my backup folder but as it was still in my Garbage Bin, I restored it after the fact.  The restored Palm Folder files scattered all over my computer.  When I tried to reinstall after the Restore, same Microsoft error blocked me again out of Desktop.  Not knowing what files to really delete, but determination and "painfully" did a search by both my Treo username and "Palm", sifted thru every file, sent back to garbage bin, cleaned registry again, reinstalled, and held my breath as computer restarted. 
    Everything is cleaned out, running smooth and I have my backup folder.
    Might I add to the viewers not to save a backup of the backup folder AFTER the fact.  Either rename or save a duplicate outside of the Program Folder to avoid hours of needless work.  Again thank you so very much for helping me.  
    Next:
    Delete folders:
    - C:\Palm
      C:\Program Files\Palm
      C:\Program Files\PalmOne
      C:\Program Files\Handspring
    Then go to Start > Run
    Type Regedit and click Run or OK
    Then delete keys:
    - HKEY_Current_User\Software\PalmDesktopAutorun
      HKEY_Current_User\Software\Palm
      HKEY_Current_User\Software\Palmone
    - HKEY_Current_User\Software\U.S Robotics
    - HKEY_Local_Machine\Software\PalmSource
    Post relates to: None

  • I am having trouble with Treo 755p and Sync in my new Mercury car.

    I just got a Treo 755p.  I can connect and get the phone and Sync to communicate.  As soon as I make a call however, the sync system hangs up after one ring.  I had to replace my Treo 650p which worked well with this car.  Do I have a setting wrong in my phone.  Suggestions? 
    Post relates to: Treo 755p (Verizon)

    The jquery is there to animate the marquee, so even without the JS file the div container should still be showing up right? Part of the video tutorial said to switch to "live view" to make sure one of the div containers was positioning correctly, and when I do this nothing happens. It works for the guy on the tutorial so I am not sure what I am doing differently. Since it is not working at this point I have not added the jQuery, should I just assume it is a JQuery problem and continue on? I just don't understand why it is showing up in design view but just a blank white page in live view.

  • Hotsync Log does not show any information since August 2008. My Treo 755p has been syncing fine but nothing shows in the log!

    I just noticed that when I am done syncing, the Hotsync Log does not have any information about the most recent operation.  In fact the date of the last entry in the Log is August!  Anyone know why this is happening and how to fix this?
    Thanks.
    Post relates to: Treo 755p (Verizon)

    Now I know I've lost it--I'm replying to myself!  Would you smart tech people please take a look at what I found and see if it means anything.  Thanks!
    Two more clues:
    1) I was searching the Palm Knowledgebase and found out where the HotSync Log file is.  When I open the file, using Explorer, this message pops up: 'To help protect your security, Internet Explorer has restricted this web page from running scripts or ActiveX Controls that could access your computer.  Click here to...'  If I allow it to run, the screen blinks but nothing seems to change.  If I close the Log file and reopen it, it happens again.  How can I stop this from happening to the file?  Could this be the problem?
    2) The Knowledgebase Article below tells how to create a new 'fake' log file to 'fool' the HotSync Manager.  So I renamed the original log file, then created the new file as instructed.  Then I did a HotSync.  After the HotSync completed successfully, I opened the HotSync Manager and there is my new 'fake' log file that has only the words I typed into it when I created the file. Nothing in the Log about the operation at all! 
    Article ID: 38959   What does the error that ends with 'HotSync.log is missing' mean and how do I fix it?
    The HotSync Manager is very particular: if it doesn't find things exactly as it expects, it won't work. One of the things it has to find in the right place is the HotSync log, a file where the HotSync manager records everything it does. See How can the HotSync log help me to troubleshoot HotSync problems? for more information about this file.
    When you get this error, your HotSync Manager can't find the HotSync Log. This prevents you from performing a HotSync operation. Luckily, the HotSync Manager isn't too bright. Give it any file called HotSync.log and it will be happy again.
    The easiest way to give it what it expects is to create a new text document, rename it, and put it in the folder where the HotSync Manager expects to find it. Here's how:
    Launch the Windows Notepad. You can usually get to it by clicking on the Start Menu, choosing Programs, then Accessories and finally Notepad.
    Type some text. You can type anything you want, as long as there's at least one character in the Notepad document.
    From the File menu, choose Save As.
    In the Save dialog, navigate to your user folder in the Palm or Handspring folder (find your user folder).
    Name the document HotSync and click Save.
    Launch Windows Explorer. You can get to it by double clicking on My Computer or by clicking on the Start Menu, choosing Programs and then Windows Explorer.
    From the Tools menu, choose Folder Options.
    Click on the View tab.
    Uncheck the box next to Hide file extensions for known file types.
    Navigate to your user folder.
    Right-click once on the HotSync.txt document, and select "Rename" from the menu. Rename the file HotSync.log
    Attempt another HotSync operation. If you still get the "HotSync.log is missing" message, contact Handspring.
    Article ID: 38959 Article Type: Error, Troubleshooting, How To Date Created:  Sunday, December 12, 2004 9:10:17 AM Date Modified:  Friday, April 20, 2007 4:03:38 PM Relevant products:  Treo 300, Treo 180, Treo 180g, Treo 270, Visor Edge, Visor Neo, Visor Pro, Visor Platinum, Visor Prism, Visor Deluxe, Treo 90
    Post relates to: Treo 755p (Verizon)
    Post relates to: Treo 755p (Verizon)

  • Treo 755p stuck in infinite loop.

    My 755p (Verizon) is stuck between the Access Powered screen then Palm screen then blank screen then Access Powered screen then Palm screen then blank screen then Access Powered screen then Palm screen then blank screen then Access Powered screen then Palm screen then blank screen then.
    Please help!
    Post relates to: Treo 755p (Verizon)

    To fix this what we need to do is hard reset your device. The instructions to do that is here http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 this tells you how to do all types of resets. Also, what we need to do is rename your backup folder. What this folder is, it hold all your programs from the last time you synced your PC. On your computer go here My Computer--> C drive --> Program files --> Palm/PalmOne--> your hotsync user name --> and right click on your backup folder and rename it to "backup.old" Resync your device to the same user name and you will get all your contacts, calendar, tasks, and memos.
    You can install the programs again but make sure they are compatible with the device. Also try one program again and wait 24 hours to see if the same thing happens again. This way you know what program is causing the issue.

  • Palm Treo 755p Buttons Flashing

    I just received a Palm Treo 755p from a reputable seller on ebay.It was brand new, still in the plastic and everyuthing. As soon as a put the battery in the screen is white and all the buttons are flashing. I have had it charging for almost 3 hours now and it wont do anything but that. I tried the hard reset and it wont even take me to the option to erase all info, Just blinking buttons. I called the people I bought it from and they said it just needs to be charged for 12 hours the first time. The phone came in a Palm box, not a box from my carrier. Does this sound accurate and if not, is there anything I can do?
    Post relates to: Treo 755p (Verizon)

    Hello brykass08 and welcome to the Palm forums.
    My Treo 700p and 755p, regardless of who I purchased them from, all came in Sprint retail packaging.  One thing to check is to see if there are any Palm hologram logos on the battery.  You may not have a Palm OEM battery.  I would also pull the battery out of the device, connect the charger, and then try to power up the devcice.
    In any case, this sounds like a hardware problem to me.
    Alan G

  • Need driver for Treo 755p for Windows Vista Ultimate x 64.

    I am not able to find a driver for the treo 755p for Windows Vista Ultimate x64. Where can I find the driver?
    Post relates to: Treo 755p (Verizon)

    You can't you can only do bluetooth synchronization.
    Take a look at the stickied thead above the hotsync board
    http://forums.palm.com/palm/board/message?board.id​=windows_hotsync&thread.id=17980
    Any comments in regards to syncing via bluetooth should be directed there, there is no drivers and at this time there won't be.
    I am locking this thread since this issue has been brought up several times here.
    Post relates to: Centro (Sprint)
    Message Edited by HardBeatZ on 07-26-2008 10:44 PM

Maybe you are looking for

  • When setting up a new ipad how do you know what your user name is?

    When setting up a new ipad how do you know what your user name is?

  • Devsuit upgrade error from 10.1.2.0 to 10.1.2.3

    hi all, as i upgrade the devsuit from 10.1.2.0 to 10.1.2.3 by universal installer, but the following error is thrown, Please help, many thanks. java.io.IOException: The system cannot find the file specified      at oracle.sysman.oii.oiix.OiixJarClass

  • Change field color to Unspecified

    Hi, I have a forms in 10g which I converted from 6i. I have few poplist items in my canvas. Some of them have the correct color but few of them have white in the background. I want to change all the colors to use <Unspecified>. How do I get that?? If

  • 201 Movement Type Excise

    Dear All, I want to capture only Part I entries while doing a goods issue movement type 201 in MIGO. But when i select the option and put Classification type as IPD, then on check of document, the system gives me error to put Customer number and Exci

  • How to match time alone (without date) in a query

    Hi, I have a date colum named timeprop, where a time value has been inserted through: DateFormat.getTimeInstance(DateFormat.MEDIUM, "de_DE").parse("11:12:13") In SQL developer I can check the inserted value as: select timeprop from version_table wher