Downgraded to flash 10.3, still having major issues

It first started happening with the latest Flash. Randomly when watching YouTube videos (or any other video site that uses Flash) I'd have your typical crashes and freezes. However, it extended to more than just FireFox, it would cause constant freezes on my whole computer and anything I would do. It would continue even after I closed FireFox, forcing me to restart. It kept happening over and over and over again, so I downgraded to Flash 10.3. The problem disappeared for awhile, but then came back. Still on Flash 10.3, and seems to happen very often now. I thought it might be hardware problems, or a virus, or drivers were outdated. I checked everything, it's all fine and updated and scanned.
The problem only happens if I try to load any type of Flash video, be it from YouTube or elsewhere, and once it happens it'll keep happening until I restart. I found that by using Windows' "Boot with last known good configuration" it would stop the problem for a good few days, but then return, forcing me to restart and do it again. I re-updated my drivers and opted for nVidia's driver update instead of Sony's official driver for my nVidia card, but no change. I don't know what to do any more, and it's driving me nuts.

Try updating to flash 11.4. It was released today and may fix many of the issues in older versions of Flash. [http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_11_plugin.exe http://download.macromedia.com/get/flashplayer/current/licensing/win/install_flash_player_11_plugin.exe]

Similar Messages

Having Major Issues with Flash Player

Using IE 8, 64 bit, flash player 11.4.402.287
Having major issue with flash player! can not play a lot of games on FB. Games tell me that i need to update my Flash Player, PC says I have the latest version installed already.Ok, thought i would uninstall/reinstall...no go. Will not uninstall, says I need to close IE...which none are open. This issue has been going on for weeks now. I have done everything the help said to do and still not working. I need HELP!

im using the recent adobe flash player
windows XP, internet explorer, 10.045.2, 32bit
im not sure how this works, but im sure all that is correct:)
if you need additional infomation, just let me know

Anyone else having major issues with 1.1.4?

So I updated to Firmware 1.1.4 a day or two after it came out and I've been having major issues. This is on a phone purchased on launch day that has not been jailbrokened or hacked in anyway.
Battery life...when the phone actually works, is down drastically. I went from 2.5 days with Bluetooth and Wi-fi on to about 12 hours at one time.
Wi-fi...when it works, just cuts in and out even when the signal should be all full strength.
Clock...even though it is set to sync with network time, can be accurate one minute and lags behind as much as 15 minutes.
I've done numerous restores, both from a backup file and setting the phone up as a new phone. Nothing seems to fix the problem so far. Has anyone else run into these issues and/or know of how to fix it.
I was contemplating downgrading the firmware to 1.1.3, but I don't believe there is an official way to do it.
Any input would be appreciated.

I have exactly the same issues, After the Update the sound quality of my calls dropped drastically! I tought first I got a cold or something like that...but it was not I cannot hear as clearly as I used to before and increasing the volume does not solve anything!
I also noticed that trsitionning from an application to another and especially using the home button to got to home page is getting slower. I need more time to lose safari and go to emails than before.
My Memory usage is exactly the same as I havent added anything to my library or so. Aroud 3.5 GB free.
Anyone with same symptoms?

Am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it

i am having major issues! this does not work i dont understand..does the ipod have to be off while pressing the buttons if so how is it possible if it is connected to the computer either way it turns on..and when i tried these steps while the ipod was on it still doesnt work it just asks me “slide to power off” please someone help me i just cant seem to put my ipod in DFU mode

To get the iPod in recovery mode and DFU mode you first have to turn the iPod off.
Just what is the problem you are tying to resolve?
Sometimes you have to let the battery fully drain if you can't turn the iPod off. After charging for at least hour try again.

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!

I am having major issues with links in keynote! Even though the links (a navigation system) are on the master page, they are only working on some of my slides. Anyone have ideas on how to fix this or similar issues? Help!
I have created a navigation system on the master pages and set the presentation to links only mode. I also have other links scattered throughout the program, like a linkable table of contents, etc. Some of them work, some of them don't. Not sure why. Anyone out there having similar issues? Or have any idea on how I can solve this issue? Any help would be appreciated!
Thanks!

Links should not create any problems in Keynote. If they are set up correctly on text, the text will be underlined. Objects that have links will have a curved arrow bottom right, if you click the arrow a popup will display the link information.
Try this repair for Keynote, ensure you complete all the tasks and in the order shown:
1
delete all the iWork applications if you have them, not just Keynote, using Appcleaner from Mac Update, its a freeware application
2
empty the trash: Finder > Empty Trash
3
Shut down your Mac, wait 30 seconds, then power on the Mac, immediately after the start chime, hold down the Shift key
When you see the grey Apple symbol and progress indicator (a spinning gear), release the Shift key.
If you are prompted to log in, type your password, then hold down the Shift key again as you click Log in.
4
Let the Mac fully boot up, it will take longer as the OS is repairing the drive
5
when fully booted, go to Applications > Utilities > Disc Utility; click on the boot drive then First Aid tab and click repair disc permissions
6
when complete, restart the Mac normally, Apple menu > Restart
7
install Keynote from the Mac App Store
let us know if this helped

HT4623 I can no longer send photos from my Iphone 4G. Also not receiving any photos sent by family members. I did the reset of the entire phone & restored from Icloud backup still having same issue.

I can no longer send pictures from my I phone 4Gs, It's been updated & I reset the entire phone & restored. Still having same issues. Also not receiving pictures anymore either.

Ah yes school boy error there out of frustration and discontent..
My issue is with music/apps/films etc not downloading from iTunes / App Store.
They initially fail and message is displayed stating unable to download / purchase at this time, yet if I retry it says I've already purchased (?) or alternatively I go to the purchased section and there they are waiting with the cloud symbol..
However some items get frozen in the download window and cannot be retried or deleted. Message appears stating to tap to retry, but even if you stole every bath and sink in the uk you'd still not have enough taps.
I post here as the iTunes guys are useless in there 'help' and have only advised posting here or phoning apple, at my expense, to explain a problem that could be rectified by forwarding my original email to a techie. However the tech team apparently don't have an email address as they're from ye olde Middle Ages..!
Anyways I digress.
So I tried sync to pc, but instead of showing the file as ready to listen/use/view, the iCloud symbol shows and I'm back to square one as the item is unable to download..
At frustration station waiting for a train from pain...
All my software is up to date, and had all worked fine prior to the last big iOS update that resulted in all the changes in display and dismay.
Answers in a postcard :-)
Much love

Having major issues with InDesign CS6

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!!

SherwoodGirl wrote:
Having major issues with InDesign CS6.
Then post your qeustion on the Adobe forums is it's their software you're having problems with:
http://www.adobeforums.com

Having major issues with InDesign CS6. will upgrade fix???

Having major issues with InDesign CS6. Not only is it crashing, but it is corrupting the existing file. Then when I relaunch, it is not allowing me to open the file again.
In another instance, yesterday I opened an file created 3 months ago and it allowed me to make changes, however I could not save them to the existing file, or not even to a new name.
I had to copy each layer on each page to create a new document. NOT GOOD!!! Just saw that ADOBE has an update for InDesign. WILL THIS FIX THE PROBLEM??

Yes, I would certainly get the latest update. That we often solve issues like these, for this is not normal. Some further tips would be quite InDesign, then to trash your InDesign preferences and then re-start InDesign (it will rebuild them again). Some further areas to look into would be:
* Corrupt Font(s) (or corrupt font caches - see below)
* Corrupt Image(s)
* Power Failures (power surges)
* Placing images via drag-and-drop from an Internet page
* Working on an InDesign file over a network or on a remote server
If all else fails, we as Markzware (I work for them) also offer a Service to fix corrupt InDesign documents. See:
http://markzware.com/support/faq/recover-bad-file-service/
Hopefully this helps you.
David Dilling of
Markzware

I own Lightroom 4 and have updated the software however, I am unable to import images taken on the Sony A6000. I have also updated the raw converter and am still having this issue.

I own Lightroom 4 and have updated the software however, I am unable to import images taken on the Sony A6000. I have also updated the raw converter and am still having this issue.

You can either upgrade to Lightroom 5.4 or later, or use the free Adobe DNG Converter version 8.6 to convert your RAW photos to DNG, which then will import into Lightroom 4.

Why am I NOW having major issues watching YouTube videos using WiFi vs Ethernet?

Why am I having major issues watching YouTube videos when the cable modem is connected to Airport Extreme, but they work flawlessly if my computer is connected directly to the modem? Comcast is the internet provider. 2.16 GHz Intel Core 2 Duo is the iMac. Getting the dreaded "This video is currently unavailable" OR "An error occurred. Please try again later." I swap back and forth... it's unbelievable. Videos that give errors over WiFi play fine when hooked up via ethernet.

If your wireless connection is slow, video streaming will stutter or fail completely. The wireless connection can be slow if there are other wireless networks in your area, all competing for the same limited number of wireless channels.
If you have a fairly new Extreme, you can use 5 GHz. Your iMac is capable of using it, and this will mitigate the effects of wireless interference.
Keep one thing in mind - if in the course of troubleshooting you have been routinely disconnecting and reconnecting your Extreme and the iMac to your modem - "swapping back and forth" as you described - be sure to power down the modem first. Most cable modems will refuse to communicate with a different device, until after you reset it by powering it down. If you want to compare wired speeds to wireless, connect your iMac to one of the Extreme's LAN ports instead, and turn off the iMac's wireless in its WiFi menu. Its speed should be nearly identical to that you will have by connecting it directly to the modem. Swapping connections in this manner does not require a power down cycle.

Anyone else still having iMessage issues?

I was having major problems yesterday then last night all was well. Now this morning my imessages have reverted to being sent as text messages.

There are a lot of posts here so I assume that there is still lingering problems. Just sit tight I'm sure they will get it sorted out soon.

I downloaded Yosemite last week, having major issues with typing

dw yosimite last week and have had major issues with typing, cursor leaving page

Hi KevinfromGeneva,
Welcome to the Support Communities! Are you working with a wireless keyboard or mouse, or are you having issues with a trackpad? The article below offers general troubleshooting tips for issues with these input devices:
Troubleshooting wireless mouse and keyboard issues - Apple Support
Cheers,
- Judy

Still Having "Connecting" issue after 2.02 Update

Just curious to know if others are still having the problem where Mail keeps showing "connecting" when the program is opened, and you get the iPhone version of the spinning beach ball of death.
It only stops after a hard reset.
If anyone has figured out how to solve this issue, please post

I certainly agree... a tough summer.
We support physicians in a metro hospital and some of them are clamoring for new i Phones. So I made the switch -- moving my business number and mail -- to my personal first gen iPhone.
Based on the troubles in collecting POP mail (used by a number of our University docs) as well as difficulty in connecting to our Exchange server ... we now officially discourage physicians from making the switch.
We've found that disabling WiFi helps in collecting POP mail more reliably, but it often requires a re-boot to make a successful connection.
It's really a shame.

Creative Suite 6 Design Crashing - try to reinstall and having major issues

Creative Suite 6 Design & Web Premium started crashing recently every time I try to open one of the programs. I have an iMac 27-in Mid 2011 running Yosemite 10.10. The programs were working fine up to a few days ago. I'm trying uninstall and reinstall, but when I try to uninstall by choosing the uninstaller in my applications folder, I'm told the Adobe Application Manager is already running even though I can't see it anywhere on my Mac as a background process. When I try to use the CD to re-install CS6, I'm told that Adobe Installer is already running even thought I can't see it anywhere on my mac either. So I used this article and downloaded the cleaner tool and ran that (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6). But I'm still having issues trying to install now. So I need help trying to figure out how to kill the Adobe Installer and/or Application Manager permanently so I can reinstall.

I did and there isn't a process there that is the Adobe Installer. When I double-click on the installer on my CD, I see the process start in the Activity Monitor, but I still get the message that the Adobe Installer is running already and I need to close it. I've actually uninstalled everything at this point using a third-party software called AppCleaner so there aren't any Adobe files left on my computer. So I have no clue how the Adobe Installer can be running already if it doesn't exist on my computer nor is there a process in the activity monitor running. Any suggestions?

Am I the only one still having this issue

I realize IE put a fix in place in April 2008 for swf flash
to no longer require click to activate. Am I the only one who still
has this issue. I am running Vista and IE 7 and always have to
click to activate. What am I doing wrong?
Do I need a new plug in page reference to Adobe?

I realize IE put a fix in place in April 2008 for swf flash
to no longer require click to activate. Am I the only one who still
has this issue. I am running Vista and IE 7 and always have to
click to activate. What am I doing wrong?
Do I need a new plug in page reference to Adobe?

Downgraded to flash 10.3, still having major issues

Similar Messages

Maybe you are looking for