Downgrading a DC running Server 2012 R2 to Server 2008 R2

This is NOT a licensing question. All I see when searching this question are answers about licensing. I already have the licensing. My question is, is it possible to downgrade a domain controller that is running Server 2012 R2 to Server 2008 R2? I mistakingly
raised the functional level of my domain from server 2003 to 2012 R2 before upgrading my exchange server running 2003 and now I have no way to migrate my exchange server. Ideally, I would like to just downgrade the DC to Server 2008 R2 and upgrade everything
else to that level as well, including Exchange Server 2010. Any relevant input would be greatly appreciated.

here you go Exchange 2010 Sp3 RU5 .....
Active Directory Domain Controllers running Windows Server 2012 R2
Active Directory Forest Function Level and Domain Functional Level of Windows Server 2012 R2
The following is not supported:
Installing Exchange Server 2010 SP3 RU5 on a Windows Server 2012 R2 server
http://exchangeserverpro.com/exchange-server-2010-support-windows-server-2012-r2/
--oz

Similar Messages

Upgrade Virtual machine running server 2008 r2 to server 2012 r2.......

Hi Everyone.........
I have virtual Server machine Current Running Server 2008 r2 data-center, and try to upgrade server 2012 r2 data-center but unfortunately not Upgrade and Showing Errors like below....
how to upgrade virtual server machine in server 2012 r2, Please help me for this Issue .

I recommend doing a fresh install of Server 2012 R2 on the bare metal, enable the Hyper-V role and migrate the VMs over using these steps:
Shutdown the VMs on the current 2008 or 2008 R2 Hyper-V host(s)
In Hyper-V Manager, delete all snapshots and saved states of all VMs.
Set all the VM vNICs to use static MAC
Export each VM
On the new 2012 R2 Hyper-V server, import the VMs
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Best practices to share 4 printers on small network running Server 2008 R2 Standard (service pack 1)

Hello,
I'm a new IT admin at a small company (10-12 PCs running Windows 7 or 8) which has 4 printers. I'd like to install the printers either connected to the server or as wireless printers (1 is old enough to require
a USB connection to a PC, no network capability), such that every PC has access to each printer.
Don't worry about the USB printer - I know it's not the best way to share a printer, but it's not a critical printer; I just want it available when its PC is on.
I've read a lot about the best way to set up printers, including stuff about group policy and print server, but I am not a network administrator, and I don't really understand any of it. I'd just like to install
the drivers on the server or something, and then share them. Right now all the printers do something a little different: one is on a WSD port, two has a little "shared" icon, one has the icon but also a "network" icon... it's very confusing.
Can anyone help me with a basic setup that I can do for each printer?
p.s. they all have a reserved IP address.
Thanks,
Laura

may need to set print server... maybe helpful.
http://www.techiwarehouse.com/engine/9aa10a93/How-to-Share-Printer-in-Windows-Server-2008-R2
http://blogs.technet.com/b/yongrhee/archive/2009/09/14/best-practices-on-deploying-a-microsoft-windows-server-2008-windows-server-2008-r2-print-server.aspx
http://joeit.wordpress.com/2011/06/08/how-do-i-share-a-printer-from-ws2008-r2-to-x86-clients-or-all-printers-should-die-in-a-fire/
Best,
Howtodo

Has anybody had an issue with System State Backups on a Dell PowerEdge R510 Server running Server 2008 R2?

Hi,
We have recently had issues running system state backups on our 2008 R2 Domain Controllers.  They are running on Dell PowerEdge R510 Physical Hardware. Whenever you initiate a system state backup, the Domain Controller becomes unresponsive
forcing us to physically reboot it.   Nothing in the Event logs or the Dell Open Management Hardware Software indicates issues with Phyiscal disks but we can always replicate the issue by starting the system state backup.
The system state backup is initialted as a batch file that runs as a scheduled task.   the commands run are as follows:
WBADMIN START SYSTEMSTATEBACKUP -backupTarget:[drive letter] -quiet
We have 4 Domain Controllers with identical disk configurations. When the DCs were setup I confirmed the system state backups were working but the issue started occuring sometime in Dec 2014. We are going to run the Dell Hardware Update Utility
to update the RAID, BIOS, Firmware updates but Has anyone experienced a similar issue that may have been triggerd by a Microsoft Patch?
Thanks,
Kevin C.
kconway@fnalgov

Hi Kevin,
This issue could be due to the Mountmgr.sys driver incorrectly maintains a global mutex. This behavior causes a deadlock situation in the Mountmgr.sys driver.
Please install the hotfix in the article below to resolve the issue:
A computer stops responding because of a deadlock situation in the Mountmgr.sys driver in running Windows 7 or in Windows Server 2008 R2
http://support.microsoft.com/kb/2614892
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

I need to downgrade Product key from Windows server 2012 STD edition to Windows server 2008 ENT edition

I have a product key for Windows server 2012 Standard ROK edition and need to downgrade it to windows server 2008 Enterprise edition.

Hi,
Based on my research,
Windows Server 2012
Standard edition
can be downgrade to any prior version of Standard and Enterprise or Essentials editions.
For more detailed information, please refer to the links below:
Understanding
downgrade rights
WS2012_Licensing-Pricing_FAQ
Best regards,
Susie

Adding sites to compatibility mode and trusted sites, IE10 and Server 2008

We're having a challenge with configuring a GPO to add several sites to Compatibility View Settings as well as adding several others (the same sites, plus some others) to Trusted Sites. We are currently running VMware's Persona Management/floating
pools (thin provisioned linked clones), with the appdata folder redirected to the Persona server. Clients are running IE10, DCs are running Server 2008 R2 with IE8.
gpresult/r shows the GPO listed under Applied GPOs on the User Settings side (and all the settings are user settings); however, compatibility and trusted sites settings do not apply.
From prior research on the topic, I seem to recall that I needed to install the IE10 IEAK; however, I cannot install that without having IE10 installed first, and I cannot install IE10 without installing the pre-requisite elements, which I cannot install
(either through Windows Update or the IE10 standalone installer). When the IE10 install fails, it refers me to a Microsoft KB article that won't open. If I open the article on a workstation PC, I find links to five separate prerequisite files.
If I download all five files and attempt to install them, they say they're not applicable to my computer. I can't post links in this article yet (account hasn't been verified), but a Google search for "MS KB 2818833" leads to the page with
the links.
64-bit Server 2008 R2.
Any thoughts?

Hi,
Before going further, how did we configure the settings? Since Windows 8, the IEM settings have been deprecated. As a result, IEM settings won't apply to IE10 or above. However, in this situation, we should be able to use administrative templates
to configure the settings we want.
Regarding how to add web site to Compatibility View List via GPO, the following article can be referred to as reference.
How to add web site to Compatibility View List via GPO
http://blogs.msdn.com/b/asiatech/archive/2013/10/23/how-to-add-web-site-to-compatibility-view-list-via-gpo.aspx
Regarding how to Internet Explorer security zone sites via native policies, the following article can be referred to for more information.
How to configure Internet Explorer security zone sites using group polices
http://blogs.msdn.com/b/askie/archive/2012/06/05/how-to-configure-internet-explorer-security-zone-sites-using-group-polices.aspx
Best regards,
Frank Shen

Connecting 2 Different Cities using Server 2008 R2

Dear Members....,
we are using server 2008 r2 on our head office, as our company in expanding and the branch offices are opened at two another places. please guide me our future plans is as,,,,
we are running server 2008 r2 on our head office, and we have opened two different branch offices one in the same city but 4 kilometer away from our head office and one branch office is in another city 300 kilometer away from our head office. our requirement
is to connect both branch offices with head office. am i right that our requirements are as below......?
------a wan connection from our first branch office to head office.
------another wan connection from 2nd branch office to head office.
both branch offices will join the domain in head office.
Thankssssss
Tahir Mehmood

Hi,
You can deploy the site-to-site VPN, then all your branch office can access your head office as in the head office.
The related KB:
Step-by-Step Guide for Setting Up a PPTP-based Site-to-Site VPN Connection in a Test Lab
http://technet.microsoft.com/en-us/library/cc758271(WS.10).aspx
The related thread:
Windows Server 2012 Site-to-Site VPN
http://social.technet.microsoft.com/Forums/windowsserver/en-US/6087f1ef-0d88-47ba-9724-8ba6dfb91ff7/windows-server-2012-sitetosite-vpn
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

No HCK test for ndis filter driver in server 2008 R2

I am running HCK 2.1 to test my ndis filter driver.
1. The testing client is running server 2008 R2.
2. The driver is built for win7 x64 with vs 2012.
However, there is no test avaiable in the HCK console. Even I choose "Add Features" in "devices and printers" or "software devices", I still can not find the proper tests. But
if I build the driver for win8 x64 and run the tests in server 2012, the "ndis 6.5 logo test" shows up.
Now I do need a signature for win7 and 2008 R2.
Does anyone know how to add "ndis logo test" for win7 in HCK 2.1?

anyone can help?

Server 2008. How do I create a task to turn the server on at a specific time?

I'm running Server 2008 R2 Standard, SP1.
The electricity is scheduled to be turned off in my building for a couple hours over night.
I can shut the server down, but was wondering if there was a way to 'schedule' my server to turn itself on at a specific time the following morning?
Thank you

Hi,
Windows cannot turn itself on. it can resume sleep, but even then relies on the underlying hardware to do the boot.
i would recommend checking whether the BIOS (or EFi for that matter) supports scheduled boots
Alternatively, you can check BIOS whether you can configure the powerstate the computer needs to be in after power is restored; most computers do support that.
MCP/MCSA/MCTS/MCITP

Server 2008 Pinter install error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)

I downloaded the HP Universal printer driver for a LaserJet 4250dn network printer to our server running SERVER 2008 SP2.
I dowloaded the zipped executable files for both the PCL5 and PCL6 drivers to the desktop and ran the EXE to unzip the files. When I tried to run the INSTALL.EXE file (as an ADMINISTRATOR) for BOTH drivers, the following occurs:
Answer YES to EULA
Select TRADITIONAL MODE (or DYNAMIC MODE - it doesn't matter - neither one works)
Click INSTALL
Immediately I get the error OPERATION COULD NOT BE COMPLETED (error 0x900f0214)
Click OK
Click FINISH
This happens with both the PCL5 & PCL6 driver installations.
I activated FILE SHARING, PRINTER SHARING, and NETWORK DISCOVERY but did not solve the problem.
I was logged in as the Domain Administrator and the Local Admin also.
Any suggestions?

Hi selmore,
This is a commercial line product. For the best answer to your questions you will need to repost your question to the following links.
http://h30499.www3.hp.com/t5/Business-Support-Forums/ct-p/business-support
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Server 2008 R2 Windows Server Backup. "Error in backup of Hyper-V.vhd during read: Error [0x80070001] Incorrect function.

Hello,
We are currently using Windows Server Backup to backup three Hyper-V guests running on a Windows 2008 R2 host. Two guests are running Server 2008 R2 and one is running Windows 7. I have the backups going to a dedicated external disk drive.
WSB backs up the two 2008 R2 Hyper-V guests just fine. However, when attempting to backup the Windows 7 Hyper-V guest, I receive the following error:
Error in backup of <Windows 7.vhd> during read: Error [0x80070001] Incorrect function.
I ran a "vssadmin list writers" and all the VSS writers showed "Stable" with no errors. I have plenty of space on the external drive as well. I've read this article:
https://support.microsoft.com/kb/973455?wa=wsignin1.0#workaroundissue12 except that doesn't seem to be what I'm experiencing here.
Anyone have any suggestions?

Hi,
As the other 2 guests could be backed up correctly, the issue should not be the Windows Server Backup feature.
First please refer to this article:
Backing Up and Restoring Virtual Machines
http://msdn.microsoft.com/en-us/library/dd405549(v=vs.85).aspx
Please check if all following requirements are met. Specifically please check if Integration Service is installed.
Backup (volume snapshot) Integration Service is installed and running in the child VM. The service name is "Hyper-V Volume Shadow Copy Requestor".
Windows 2000: Backup Integration Service is not supported.
The child VM must be in the running state.
The Snapshot File Location for the VM is set to be the same volume in the host operating system as the VHD files for the VM.
All volumes in the child VM are basic disks and there are no dynamic disks.
All disks in the child VM must use a file system that supports snapshots (for example, NTFS).
If you have any feedback on our support, please send to [email protected]

Error 0x800f024b installing x86 driver on Windows Server 2008

When attempting to install updated versions of my Lexmark Universal v2 PS3 x86 drivers on 2 of my Windows 2008 clustered print servers, I am receiving the following error screen: "Unable to install Lexmark Universal Universal v2 PS3,
Type 3 - User Mode, x86 driver. Operation could not be completed (error 0x800f024b)". I have 55 other Windows Server 2008 file and print servers that I have not had any issues doing this upgrade to. It only happens on my 2 clustered
print servers.

I believe the issue is not installing the driver in the spooler context but adding the driver to the driverstore. On a cluster the driver is added remotely (yes even on the active node) and the addition to the driverstore also travels the remote install
path. There was some issue we fixed for Lexmark due to some long string or something in this context but I can't find the information.
Are you running Server 2008 or 2008R2?
Alan Morris Windows Printing Team

WPA2-Enterprise Radius Authentication Windows Server 2008 R2

Hello,
I have tried a few online tutorials for providing secure wireless access. I currently have a server running Server 2008 R2 that has RRAS, NAP, and AD CS installed on it. My goal is to create a wireless SSID that utilizes WPA2-Entperise for users
to connect. Their AD credentials would need to belong to my "Wireless Users" group. I have seen tutorials that involved certificates, and some tutorials that simply added the RADIUS clients along with the network/connection policies,
and then added the settings to the router. When I've tried both ways, the wireless network never connects to the network. If I un-check the "Use Windows login credentials" a username/password field pops up. I enter the credentials
(tried both username and domain\username) of an account that is part of "Wireless Users". When I hit OK it sits for a few moments, and then pops back up again. When I do check "Use Windows login credentials" it says it can't
connect.
I have tried different firmware on the router, and I know the router is not the issue. This server is joined to my domain controller. It feels like the NAP server is not reaching the domain to authenticate credentials. Am I doing anything
wrong that I should be made aware of? In NAP if I right click the server, the "register in active directory" is greyed out, which I assume is because it's already joined to the domain.
I appreciate any help you can provide.
-Ken

I've searched in "Event Viewer" on the NPS server, and came across an interesting error. I have Google'd the error, and there are only a select few articles about it. If I try to connect, often times I will get two information events:
Event ID 4400 "A LDAP connection with domain controller DC-VPN-IIS-01.dc.cooper.org for domain COOPER is established."
And now...the issue
Event ID 6273
Network Policy Server denied access to a user.
Contact the Network Policy Server administrator for more information.
User:
Security ID: COOPER\LAPTOP3-W7$
Account Name: host/laptop3-w7.dc.cooper.org
Account Domain: COOPER
Fully Qualified Account Name: COOPER\LAPTOP3-W7$
Client Machine:
Security ID: NULL SID
Account Name: -
Fully Qualified Account Name: -
OS-Version: -
Called Station Identifier: c0c1c074bfb6
Calling Station Identifier: 00216a902b70
NAS:
NAS IPv4 Address: 172.16.4.2
NAS IPv6 Address: -
NAS Identifier: c0c1c074bfb6
NAS Port-Type: Wireless - IEEE 802.11
NAS Port: 11
RADIUS Client:
Client Friendly Name: CiscoAP
Client IP Address: 172.16.4.2
Authentication Details:
Connection Request Policy Name: Use Windows authentication for all users
Network Policy Name: Connections to other access servers
Authentication Provider: Windows
Authentication Server: dc-vpn-iis-01.dc.cooper.org
Authentication Type: EAP
EAP Type: -
Account Session Identifier: -
Logging Results: Accounting information was written to the local log file.
Reason Code: 65
Reason: The Network Access Permission setting in the dial-in properties of the user account in Active Directory is set to Deny access to the user. To change the Network Access Permission setting to either Allow access or Control access through NPS Network Policy, obtain the properties of the user account in Active Directory Users and Computers, click the Dial-in tab, and change Network Access Permission.
Clearly, when I try to connect, it's completely bypassing the network policy I created, but going to the "Connections to other access servers", which by default denys access. I've tried everything....removed and re-added the security policy...added
2 network policies for wireless. Does anyone know why the network policy I create for wireless is not being recognized?

Error: Registering remote JRun instance in CF9/Windows Server 2008

Hello,
We are upgrading our dev/qa/uat environments to a new set of servers (2). CF9.01 with the latest patches is installed fresh on both servers, which are running Server 2008/IIS7. I created jrun instance dev01 and dev02 on each server, respectively. The plan was to let the CISCO load balancer manage the load between the two boxes, and to then share JRun sessions between the boxes so that we could failover anytime during the day if need be. Whenever I try to register a remote instance I get the following error:
Variable ORGSPECDIR is undefined.
The error occurred in serverlist.cfm: line 360
Called from serverlist.cfm: line 244
Called from serverlist.cfm: line 193
Called from serverlist.cfm: line 182
Called from serverlist.cfm: line 47
Called from serverlist.cfm: line 1
Called from index.cfm: line 197
Called from index.cfm: line 1
-1 : Unable to display error's location in a CFML template.
Resources: Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.10) Gecko/20100914 Firefox/3.6.10
Remote Address
107.3.11.73
Referrer
http://devweb06/CFIDE/administrator/entman/addserver.cfm?servertype=addremote
Date/Time
12-Oct-10 01:16 PM
Stack Trace
at cfserverlist2ecfm1631918553._factor5(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrato r\entman\serverlist.cfm:360)      at cfserverlist2ecfm1631918553._factor6(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrato r\entman\serverlist.cfm:244)      at cfserverlist2ecfm1631918553._factor7(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrato r\entman\serverlist.cfm:193)      at cfserverlist2ecfm1631918553._factor14(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrat or\entman\serverlist.cfm:182)      at cfserverlist2ecfm1631918553._factor15(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrat or\entman\serverlist.cfm:47)      at cfserverlist2ecfm1631918553.runPage(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator \entman\serverlist.cfm:1)      at cfindex2ecfm1563785181._factor12(E:\cf9_final\cfusion\wwwroot\CFIDE\administrator\entman\ index.cfm:197)      at cfindex2ecfm1563785181.runPage(E:\cf9_final\cfusion\wwwroot\CFIDE\administrator\entman\in dex.cfm:1)
coldfusion.runtime.UndefinedVariableException: Variable ORGSPECDIR is undefined.
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:377)
     at coldfusion.runtime.CfJspPage._get(CfJspPage.java:339)
     at coldfusion.runtime.CfJspPage._autoscalarize(CfJspPage.java:1447)
     at cfserverlist2ecfm1631918553._factor5(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:360)
     at cfserverlist2ecfm1631918553._factor6(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:244)
     at cfserverlist2ecfm1631918553._factor7(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:193)
     at cfserverlist2ecfm1631918553._factor14(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:182)
     at cfserverlist2ecfm1631918553._factor15(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:47)
     at cfserverlist2ecfm1631918553.runPage(E:\cf9_updates_rc\cfusion\wwwroot\CFIDE\administrator\entman\serverlist.cfm:1)
     at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231)
     at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416)
     at coldfusion.runtime.CfJspPage._emptyTcfTag(CfJspPage.java:2722)
     at cfindex2ecfm1563785181._factor12(E:\cf9_final\cfusion\wwwroot\CFIDE\administrator\entman\index.cfm:197)
     at cfindex2ecfm1563785181.runPage(E:\cf9_final\cfusion\wwwroot\CFIDE\administrator\entman\index.cfm:1)
     at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:231)
     at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:416)
     at coldfusion.filter.CfincludeFilter.invoke(CfincludeFilter.java:65)
     at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:381)
     at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:48)
     at coldfusion.filter.MonitoringFilter.invoke(MonitoringFilter.java:40)
     at coldfusion.filter.PathFilter.invoke(PathFilter.java:94)
     at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
     at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:79)
     at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:28)
     at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
     at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
     at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
     at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
     at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:62)
     at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:126)
     at coldfusion.CfmServlet.service(CfmServlet.java:200)
     at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
     at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42)
     at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
     at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
     at jrun.servlet.FilterChain.service(FilterChain.java:101)
     at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
     at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
     at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
     at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
     at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
     at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
     at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Now, from either of the 2008 servers I CAN register a remote JRun instance that resides on a Server 2003 box. If I go to the Server 2003 box and try to register an instance from either one of the 2008 servers I get the same error as above, so it is definitely specific to Windows 2008 server.
Any help would be greatly appreciated. I really don't want to think about storing sessions in a db but want to have that high availability/flexibility at anytime.
Regards,
Gary

Hi Gary, this was a bug in CF 9.0.1. We've issued a hotfix fo it:
http://kb2.adobe.com/cps/886/cpsid_88660.html

BSOD on Server 2008 STANDARD SP2

Assistance with BSOD on Dell R710 Server running Server 2008 STANDARD SP2
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Communication was lost to this server (Not a power outage). It was discovered with a blue screen with the above error. A memory dump was created with reference STOP 0x0000000D1. NETIO.SYS Address 8075FA37.
The machine rebooted after the dump and upon logon the following message was displayed:
Problem signature:
Problem Event Name:          BlueScreen
OS Version:           6.0.6002.2.2.0.272.7
Locale ID:              1033
Additional information about the problem:
BCCode: d1
BCP1:     000000D4
BCP2:     00000002
BCP3:     00000000
BCP4:     8075FA37
OS Version:           6_0_6002
Service Pack:         2_0
Product: 272_3
Files that help describe the problem:
C:\Windows\Minidump\Mini011315-01.dmp
Link to one drive for the dump files:
https://onedrive.live.com/?cid=D0667AD0A7D6788C&id=D0667AD0A7D6788C!180

* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: 000000d4, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000000, value 0 = read operation, 1 = write operation
Arg4: 8075fa37, address which referenced memory
Debugging Details:
Unable to load image \SystemRoot\system32\DRIVERS\Teefer.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for Teefer.sys
*** ERROR: Module load completed but symbols could not be loaded for Teefer.sys
READ_ADDRESS: GetPointerFromAddress: unable to read from 81d6d874
Unable to read MiSystemVaType memory at 81d4d420
000000d4
CURRENT_IRQL: 2
FAULTING_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: DRIVER_FAULT_SERVER_MINIDUMP
BUGCHECK_STR: 0xD1
PROCESS_NAME: System
TRAP_FRAME: 9bd152f4 -- (.trap 0xffffffff9bd152f4)
ErrCode = 00000000
eax=000000d4 ebx=000000d0 ecx=9bd15374 edx=00046e28 esi=000001a0 edi=c0000017
eip=8075fa37 esp=9bd15368 ebp=9bd15378 iopl=0 nv up ei pl nz na pe nc
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010206
NETIO!StreamGetCalloutContext+0xd4:
8075fa37 833800 cmp dword ptr [eax],0 ds:0023:000000d4=????????
Resetting default scope
LAST_CONTROL_TRANSFER: from 8075fa37 to 81c83ecd
STACK_TEXT:
9bd152f4 8075fa37 badb0d00 00046e28 00000000 nt!KiTrap0E+0x1c5
9bd15378 8075fac6 001f3516 00000000 00000107 NETIO!StreamGetCalloutContext+0xd4
9bd153ac 80761508 001f3516 00000000 00000107 NETIO!StreamGetCalloutAndDataContexts+0x33
9bd15428 80750580 00000014 a1756830 9bd15734 NETIO!StreamProcessCallout+0x63
9bd15480 8073c44b 00000014 9bd15734 9bd1563c NETIO!ProcessCallout+0xee
9bd154b0 8073c4ab 00000014 d6b06208 9bd15734 NETIO!ProcessFastCalloutClassify+0x2c
9bd15590 8075ed12 00000014 9bd15734 9bd1563c NETIO!KfdClassify+0xd8
9bd15618 8075effb 00000014 9bd15734 9bd1563c NETIO!StreamClassify+0x94
9bd15744 8075f436 fe1fd800 00000014 9bd1576c NETIO!StreamCommonInspect+0x19b
9bd15770 8ccf74c7 fe1fd818 fe160b00 a264ed98 NETIO!WfpStreamInspectReceive+0xab
9bd15798 8ccce96f fe160b08 fe160bf4 a264ed98 tcpip!TcpInspectReceive+0x52
9bd157d8 8cccf24d fe160b08 9bd157f8 9bd1582c tcpip!TcpTcbFastDatagram+0x2ca
9bd15838 8cccd686 8572df40 00160b08 9bd1589c tcpip!TcpTcbReceive+0xf8
9bd15890 8cccf099 8572df40 85720000 00000000 tcpip!TcpMatchReceive+0x1ec
9bd158d8 8cccf0ff 8572df40 85720000 85720018 tcpip!TcpPreValidatedReceive+0x22d
9bd158f4 8cccdaa0 8572df40 85720000 9bd15930 tcpip!TcpReceive+0x2d
9bd15904 8cce5bfb 9bd15918 c000023e 00000000 tcpip!TcpNlClientReceiveDatagrams+0x12
9bd15930 8cce5628 8cd3cebc 9bd15984 c000023e tcpip!IppDeliverListToProtocol+0x49
9bd15950 8cce5a78 8cd3ccd0 00000006 9bd15984 tcpip!IppProcessDeliverList+0x2a
9bd159a8 8cce7290 8cd3ccd0 00000006 00000000 tcpip!IppReceiveHeaderBatch+0x1eb
9bd15a38 8cce3798 86573400 00000000 9bd15a00 tcpip!IpFlcReceivePackets+0xbe1
9bd15ab4 8cce30a9 86572420 85a88978 00000000 tcpip!FlpReceiveNonPreValidatedNetBufferListChain+0x6e3
9bd15adc 806d10b0 86572420 85a88978 00000000 tcpip!FlReceiveNetBufferListChain+0x104
9bd15b10 806c3d25 00573af8 85a88978 00000000 NDIS!ndisMIndicateNetBufferListsToOpen+0xab
9bd15b38 806c3c9c 00000000 86573008 86177388 NDIS!ndisIndicateSortedNetBufferLists+0x4a
9bd15cb4 8060457f 85814368 00000000 00000000 NDIS!ndisMDispatchReceiveNetBufferLists+0x129
9bd15cd0 8062fccd 85814368 85a88978 00000000 NDIS!ndisMTopReceiveNetBufferLists+0x2c
9bd15cec 8062fca4 86572c10 85a88978 00000000 NDIS!ndisFilterIndicateReceiveNetBufferLists+0x20
9bd15d08 9465cc13 86572c10 85a88978 00000000 NDIS!NdisFIndicateReceiveNetBufferLists+0x1b
WARNING: Stack unwind information not available. Following frames may be wrong.
9bd15d30 9465d22f 86177388 86188700 94661108 Teefer+0xac13
9bd15d60 9465d494 8618b7c0 87792358 00000000 Teefer+0xb22f
9bd15d7c 81e0c01c 94661108 97fe8bf9 00000000 Teefer+0xb494
9bd15dc0 81c74eee 9465d420 94661108 00000000 nt!PspSystemThreadStartup+0x9d
00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16
STACK_COMMAND: kb
FOLLOWUP_IP:
NETIO!StreamGetCalloutContext+d4
8075fa37 833800 cmp dword ptr [eax],0
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: NETIO!StreamGetCalloutContext+d4
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: NETIO
IMAGE_NAME: NETIO.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 49e0209d
FAILURE_BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
BUCKET_ID: 0xD1_NETIO!StreamGetCalloutContext+d4
Followup: MachineOwner
Bug Check Code 0xD1: https://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
The BSOD is probably caused by teefer.sys driver. Based on searches, I found that it belongs to Sygate firewall driver system driver. So, either you update it or you remove this software. You can also contact its vendor/developer for assistance.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Downgrading a DC running Server 2012 R2 to Server 2008 R2

Similar Messages

Maybe you are looking for