Downgrading from iTunes 8 to 7, despite adding playlists since upgrading

Anyone know how to do this?
Problem is, I've made many changes to the iTunes Library since upgrading from iTunes 7 to 8, and i don't wish to lose those changes.

I managed to save my playlist changes by following some of the advice in this thread meant for Windows: http://discussions.apple.com/thread.jspa?threadID=1723649&tstart=0
Basically, I saved my *iTunes Music Library.xml* file and imported it after installing iTunes 7.7.1
Before reverting from iTunes 8.0.2 to 7.7.1, I deleted several files – many of which were possibly unnecessary. I should add I don't use iTunes for anything besides playing music – I have no iPod, iPhone, Apple TV, and I don't share my Library. My iTunes Library is located on my internal, startup disk.
1. Backed up my entire startup disk, just in case.
2. Quit iTunes 8, then quit iTunes Helper via the Activity Monitor.
3. Uninstalled iTunes 8.0.2
4. Temporarily removed any InputManagers I have, just in case. None of them are intended for iTunes or should affect it in any way – cool it Voodoo.
5. Moved ~/Music/iTunes/iTunes Music Library.xml to my desktop.
6. Deleted ~/Library/Preferences/com.apple.iTunes.plist (I can't remember whether I got rid of the com.apple.iTunes.eq.plist and com.apple.iTunesHelper.plist)
7. Deleted all files in the ~/Music/iTunes folder except the iTunes Music folder. This saved me a Gig's worth of album art too - iTunes 8 is a monster when it comes to storing its album art library.
8. Deleted Library/Receipts/AppleMobileDeviceSupport.pkg, iTunesX.pkg and any other iTunes-related receipts I could find.
9. Restarted my Mac in Safe Mode (hold down Shift key when hearing startup chime, let go once the spinning thingy appears).
10. Installed iTunes 7.7.1
11. Launched iTunes 7.7.1 while holding down the Shift key (or was it the Alt key?), then asked it to import the iTunes Music Library.xml file I'd moved to my desktop.
12. Let it do its thing – this took quite a while.
13. Quit iTunes, restarted my Mac in Safe Mode again (call me paranoid)
14. Restarted my Mac normally and returned all InputManagers to their rightful place.
Presto! Back to all-round goodness – responsiveness is good again (commands such as clicking on a playlist, double-clicking on a song etc. now execute within 0-2 sec. instead of 5-10 sec.), full screen Cover Flow is back, iTunes takes less time to start up etc.
My playlists, star ratings, play count etc. were left intact.
A serious downside for me was that I lost my MP3s' EQ settings. My library still had all my custom EQ settings, but none were assigned to any of my music. This is taking me a week or two to redo.
Also, for some strange reason a few of my MP3s lost either their artist sort tags, album artist sort tags, artist tags or album artist tags. Btw, since before iTunes 8, I've converted all my ID3 tags to v2.4.
I marked this thread as unanswered, since my downgrade wasn't 100% successful. Maybe someone else has better advice for those who'd like to revert to iTunes sanity

Similar Messages

  • Downgrade from iTunes 7 to 6 error message

    I downgraded from iTunes 7 to 6 because of that blasted +gapless playback+. On initial launch of 6 I get the license agreement, agree to it, and the get an error message that reads "The iTunes Music Library cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
    The iTunes Music Library folder has 2 files .DS_Store and Library.xml
    Any help would be appreciated as this downgrade has and upgrade has been a mess.
    Thanks in advance

    Is this an Apple approved procedure?
    I thought that once an upgrade was in it was impossible to remove it entirely due to all the little DRM things (and who know what else?)
    A lot of people (especially the ones that just listen to music) think iTunes just keeps getting worse and worse.

  • I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. Why not?

    I just downgraded from iTunes 11 back to itunes 10.7.5. My iTunes is now working from one of the Previous Music Librabies. How can I make that previous library my current library? Also, I can't empty iTunes 11 frome the trash. It tells me iTunes 11 is still open. What's going on?
    Thanks in advance!

    Without providing details on exactly what you did it is hard to provide an answer.  It's like me saying, "This chocolate cake I made tastes wrong," but not providing the recipe for review.  Maybe it was the garlic in that particular recipe.
    If iTunes is successfully using a previous library which you rename to iTunes Library.itl then that is now the current library.
    Have you restarted your computer and then tried emptying the trash?

  • Is it possible to downgrade from iTunes 11 back to 10.7

    Hi
    - Really not linking iTunes 11 , is it possible to downgrade, any answer would be extremly helpful!
    Thanks
    - Tom

    =Downgrading from iTunes 11 to iTunes 10.7=
    Try activating the sidebar, menu bar, and status bar and see if this is close enough to the previous version to make you content.  It is easier than downgrading and eventually you will be forced to run a newer iTunes unless you have an endless supply of the model computer you currently own.
    You may be able to go back with Time Machine but this may involve restoring other items too (https://discussions.apple.com/message/20441404).  Alternatively:
    Back up your computer first, in case the unexpected happens.
    Here's a step-by-step method and you may find it easier to follow than alternative methods I have posted below.
    Downgrade iTunes 11 to iTunes 10.7 - http://www.emacconsulting.com/apple/itunes/downgrade-itunes-11-to-itunes-10-7/
    If the above does not work, or you want to do it without Pacifist, or you want to know what is actually going on when downgrading, or you encounter error messages, here's more details:
    Quit iTunes.
    Get iTunes 10.7 from http://support.apple.com/kb/DL1576 or the direct download link at:  http://appldnld.apple.com/iTunes10/041-7195.20120912.d3uzQ/iTunes10.7.dmg
    Do a few preparatory steps by making sure all iTunes components are not running and cleaning old files.   See https://discussions.apple.com/message/20475394.  Do steps 3 and 4.  Steps 6-8 may be also useful but I don't know if they are essential.  Some of the other steps are not necessary, duplicate steps listed later in my post or are perhaps even unhelpful in the process.
    Replace the iTunes 11 application with iTunes 10.7.  Simply dragging the application to the trash may not work. Lion (OSX 10.7) and newer systems have iTunes integrated into the operating system and deleting is a bit more involved.  Two ways to do this are:
    1.  (Easier) Use the shareware Pacifist utility (http://www.charlessoft.com/) to install iTunes 10.7 including all associated system files. Details at http://forums.macrumors.com/showpost.php?p=16400819&postcount=6
    2. (More work) Check this reference on how to delete the iTunes application itself:
        Delete iTunes in Mac OS X 10.7 Lion - http://osxdaily.com/2011/09/13/delete-itunes-in-mac-os-x-10-7-lion/
        After deleting the application there may be other files that need downgrading too. See the note about error -42408 at the end of this post. You may want to tuck these away somewhere safe until you have completed the installation of iTunes 10.7.  I have not tested this but ideally if newer versions are not found then the installer will put in the old versions. This may include these files in /System/Library/PrivateFrameworks/ which apparently get updated by iTunes 11:
    AirTrafficHost.framework
    CoreFP.framework
    DeviceLink.framework
    iTunesAccess.framework
    MobileDevice.framework
    After doing one of the two procedures above you will have to rescue the most recent old iTunes library from your iTunes > Previous Libraries folder. Rename it "iTunes Library.itl"  and replace the existing one in the iTunes folder. A newer version of iTunes irreversibly updates your library file so you have to replace it with the old one or you will get an error message. Note, this will revert your library to the version at the time of the upgrade and you will have to update any changes made since.  See:
    https://discussions.apple.com/message/20401436 - turingtest2 11/2012 post on rebuilding empty/corrupt library from previous iTunes library file after upgrade/crash.
    iTunes: How to re-create your iTunes library and playlists - http://support.apple.com/kb/ht1451
    Other issues:
    - https://discussions.apple.com/message/20432309 - solution to mobile devices saying they need to be restored after downgrading
    - If you encounter error -42408:
    iTunes: Advanced iTunes Store troubleshooting - http://support.apple.com/kb/TS3297 > Specific Conditions and Alert Messages: (Mac OS X / Windows) - including specific error codes.
    Alternatively, check https://discussions.apple.com/message/20441424 which requires you have a Time Machine backup (though possibly if you remove the newer version of these files old ones may be installed with the iTunes 10.7 installer - untested).  A  variant of this is at: https://discussions.apple.com/message/20448184
    - Persistent "Show in iTunes Store" arrows after downgrade - https://discussions.apple.com/thread/4567064
    Send feedback to Apple telling them why your downgraded:  http://www.apple.com/feedback/itunesapp.html

  • How do you downgrade from itunes 10 to itunes 9?

    Hi guys. I was wondering if there is a way to downgrade from itunes 10 to itunes 9. When I downloaded itunes 9 and tried to install it, it said that it couldn't install because there is a newer version of itunes already on my machine. Any help would be nice.

    You might want to look into this thread .How to safely downgrade from iTunes 10 to iTunes 9? (Mac OS 10.6.4)

  • How can I downgrade from iTunes 10.5 to 10.4

    How can I downgrade from iTunes 10.5 to 10.4?

    Thanks for your support, but I changed the TimeZone (both PC and Iphone 3GS on Istanbul GMT+2) and the problem is still there. I updated also Itunes 10.5.1, same problem. I can't syncronize or update the IOS on the phone. I'm afraid I'll have to try the complete reset to factory of the Iphone (I'm afraid sync data on the iphone has been corrupted and Itunes can't sync).
    Any advice on how to save all my data, since backup function does not work because it needs the sync feature?
    thanks
    Alessandro

  • How do I "downgrade" from iTunes 10 to iTunes 9?

    How do I "downgrade" from iTunes 10 to iTunes 9 without having to uninstall and reload all of my music. The new iTunes 10 interface is hideous and bland. I can't stand looking at it anymore. iTunes 9 was much nicer. I have about 200 GB of music so i would really like to avoid having to add everything into a fresh/new library.

    you could try this: http://appletoolbox.com/2010/09/how-to-downgrade-itunes-10-to-itunes-9-2-1/.
    JGG

  • How can i downgrade from iTunes 10.5 Beta 2 to iTunes 10.5 Beta 1?

    i have a iPhone on iOS 5.0 Beta 1 and iTunes on 10.5 beta 2 but i cant sync and when i install itunes 10.5 beta 1 it's not possible to start itunes
    what can i do?

    The info below corrects the mistake of upgrading to iTunes 10.5 Beta 2 before installing iOS 5.0 Beta 2 on your iDevice.
    To downgrade from iTunes 10.5 Beta 2 to iTunes 10.5 Beta 1 you need to trash the iTunes Application before running the Beta 1 installer. Otherwise the icon will just bounce once and the app won't run.
    Then once you are back on Beta 1 should should restore your iDevice to iOS 5 beta 2 (you can only use restore, upgrade doesn't work and throws error 3002) you then need to install iTunes beta 2 and then restore from your backup.

  • I am downloading music from itunes it shows on my purchased playlist but when i try to transfer it onto a specific playlist it won't transfer across what do i need to do

    i am downloading music from itunes it shows on my purchased playlist but when i try to transfer it onto a specific playlist it won't transfer across what do i need to do

    When you are viewing the tracks on the hard disc, did you then click on "Import CD"?  This is needed to initiate the importing process that will add the tracks to your library.

  • HT1420 Why won't the songs I have downloaded recently from Itunes store, load to my Ipod. Since I switched to Windows 8 I am having trouble. HELP!

    Why won't the songs I have downloaded recently from Itunes store, load to my Ipod. Since I switched to Windows 8 I am having trouble. HELP!

    What exactly happens when you try to sync?
    Was the iPod previous synced to another iTunes library/computer?
    Have you successfully synced from this iTunes library/computer before?
    If so have you done anything like update iTunes on the computer since it last successfully synced?
    Do the songs play in iTunes?          
    Are any fo the unsyning songs DRM protected?
    What is the detail format of the non-syncing songs?
    Does any media now sync to the iPod?
    Do you have the right boxes checked to sync?
    iTunes: Syncing media content to iOS devices and iPod       
    Try syncing using the manual method                
    Managing content manually on iPhone, iPad, and iPod

  • How can i downgrade from itunes 10.5.3 to 10.5.1

    Since upgrading from iTunes 10.5.2 to v.10.5.3 I have had problems with a stuttering or halting of sound, as if I were streaming music with a slow internet connection. How can I downgrade to the previous version?

    Very difficult.  I don't know about the version change you did but often versions may irreversibly upgrade the library file.  You would have to start from scratch unless you happen to have saved a previous copy of the file.
    Another problem is getting hold of an older version.  Unless you saved a copy of 10.5.2 you will likely find it no longer exists on Apple's web site.
    Did you clone your hard drive and do a complete backup before installing new software as is advisable?

  • Music purchased from iTunes not showing up on Purchased playlist on iPhone

    The last few song purchases that I've made on iTunes are not showing on my Purchased playlist on my iPhone.  I do have Automatica Downloads turned on under the iTunes & App Stores settings on my iPhone.  I've tried signing out and signing in again on both my iPhone and computer.  I've also tried manually dragging the songs from my iTunes library to my iPhone through iTunes, but I'm when I click and drag the files from iTunes to the devices list, iTunes does not allow the songs to be moved to my iPhone.  Any suggestions?

    I had the same issue.  Try this:  go into iTunes, select your iPhone, go to Ringtones tab, check the Sync seclected Ringtones, deselect the ringtones that you pruchansed from iTunes Store.  Now Apply/Sync the phone.  When it's done, Go back to the Ringtones tab and select Sync all Ringtones.  Apply/Sync the phone again.  Now go to a contact and set a ringtone, you should see all the purchased ringtones.  Good luck.

  • HT204406 I purchased an album from itunes, and put it in a playlist. icloud status lists all the songs as purchased, and when I click on "Update itunes Match", this playlist will not update. There is a cloud to the right of the playlist name.

    I purchased an album from the itunes store, and put it in a playlist. icloud status listed all the songs as purchased, instead of the usual "Waiting". When I clicked on "Update itunes Match", everything updated except this playlist. There is a cloud to the right of the playlist name. This has never happened before.
    Any ideas?

    I deleted the songs from my desktop (iMac), then I used itunes match to reload the songs back on my desktop from my laptop. When they reappeared on my desktop, then I right-clicked on the songs and clicked on the option to add to icloud. This however did not work, and they just duplicated into icloud, but they were "greyed out" and unuseable. I hope I'm explaining myself clearly? In other words, the songs seem to be trying to go into the cloud, but they are greyed out in my library and cannot download. It is as if they are ghosts? My songs do play fine when I transfer them via itunes match, and everything appears normal. They just won't transfer via the cloud. As I said before, every other song in my library always work fine via the could, but only the songs off this one album that I bought from itunes in 07' will not work???

  • Can't play manually added videos since upgrading to IOS 8

    Since upgrading to IOS 8, my iPhone 5 won't play any videos that I copy to the device manually through iTunes.
    These are videos that I've played on the iPhone before, so I know they are compatible and of the correct format.
    Basically what is happening is that I can copy them across and they show as being on the device, yet when I eject the iPhone and open the Videos app, the video player immediately presents the message 'Cannot play video make sure you are connected to a wi-fi network'
    When I reconnect the iPhone to iTunes, the videos still show as being on the device, but they all have a small exclamation mark next to them.
    Has anyone else seen this behaviour?
    EDIT: I have just discovered that if I add the videos to my iTunes library first, then sync them to the iPhone, they play normally. However, I do not want to have to keep adding any video I want to play into iTunes first, I'd rather just copy them straight off my external HDD as I used too before.

    I have this problem too, but even adding first the video to iTunes isn't working. The videos I'm trying to add to my iPad are in my iTunes library and were in my iPad before the iOS8 upgrade (and played normally), but since the upgrade, none of them work. When transferred to the iPad in the video app show no content, and viewing the iPad content from iTunes just shows the video title in gray with the exclamation mark.
    Waiting for help too.

  • How do you stop videos from interrupting every second or so during playback (since upgrading to iOS7)?

    I've just upgraded and now every time I try to play a video it stops every couple of seconds.  It worked perfectly before installing this loathesome upgrade. I have plenty of surplus memory so this isn't an issue.

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here.  Also, if you have IOS-7, read this.

Maybe you are looking for

  • Using counter (6024E DAQ STC)

    Hi everyone, i'm very new to Labview and what i want to do is very simple.....but i can't make it work. I'm trying to count events from an external TTL signal. I have loaded Count edges(DAQ STC).vi. I haven't changed anything in the default parameter

  • OraclePreparedStatement and dynamic where clause

    I am trying to figure out a better and more efficient way to construct a dynamic sql statement where the one or more parameters can be passed which would be included in the where clause. I know I can simply use a case or if statement to build the whe

  • Using CrystalReportViewer in Intouch Wonderware

    Hope this is the right forum for this question. I am trying to use an ActiveX object (Crystal ActiveX Report Viewer Control 14.0) in my wonderware application to view & print crystal reports. But the methods return errors & I cannot access the report

  • How to make the picker highlight some particular row when the Picker View appears on the screen ?

    Hi,       I am using a UIPickerView to implement a picker with a list of names. Now when the Picker View loads and when the picker is displayed on the screen, the picker normally highlights the starting row. But I want it to highlight some other row

  • Suggestions and ideas very needed..

    Hi.. I really need to spice up some of my edting and want to know if presets and actions are worth buying and where I can find them. However, if you have any other ideas please let me know...all feedback and ideas are welcomed!