Downgrading from Server 2012 to 2008
I have already purchased Server 2012 standard 64 bit and installed it only to find out that the software I am running only accepted Server 2008. How do I downgrade to Server 2008. Also, will I be able to use the 2012 when my software accepts
it? Thanks.
I recommend you install Hyper-V role on your Server 2012 (Std comes with license for 2 VMs), setup a Server 2008 VM for your legacy software, and put serious consideration into dumping the software that does not work on Server 2012. Server 2012 has been
out for 3 years. A software vendor who has not kept up is not worth keeping.
And yes, you can downgrade to server 2008, although this is a horrible idea. By downgrade, I mean install Server 2008 from scratch, and get a 2008 license key from Microsoft under the same 2012 Std purchase.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)
Similar Messages
-
Downgrade Windows server 2012 64 bit to windows server 2008 R2 32 bit
HI,
what I want to know is when Downgrading Windows server 2012 64 bit to windows server 2008 R2 32 bit, will there be any issues of the license? Can I use the same license of 2012 server for the new 2008 installation.Hi,
Based on my experience, we cannot use the Windows Server 2012 license key to activate a Windows Server 2008 install.
In addition, which channel the windows server 2012 was purchased through? It seems that the media and product keys to downgrade are not provided although downgrade rights are granted
since Microsoft only supplies bits and product keys to Volume License customers and only for certain versions and editions of the software.
I recommend you to contact the Licensing Activation Centers below for assistance:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best regards,
Susie -
NW 6.5.8 CIFS access from Server 2012 R2 (domain auth)
Need to access (without installing client) NW 6.5.8 server from Server 2012 R2.
Up to Server 2008 R2 Domain authentication works perfectly fine, on 2012 R2 I managed to get it working a couple of times, never again. Reverting to eDir authentication with SMB Signature disabled works (can access shares fine)
Is that known issue? (not that I would expect any fix for an obsolete OS)
Sebspgsitsupport,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
W32time NTP server Windows Server 2012 o 2008 R2
Hello All
I have a one problem, I have configured of NTP Server of this way, but when restarted server the time not changed, The server not to synchronized with NTP server.
1. Run Regedit
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\Type
Change from NT5DS to NTP
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Config\AnnounceFlags
Edit the DWORD Value to 5. notice that the default value is “a”
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\TimeProvides\NTPServer\Enabled
Change the value from 0 to 1
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\W32Time\Parameters\NtpServer
Change from time.windows.com,0x1 to the IP address of NTP time Server. For example, 1.pool.ntp.org,0×1
Net Stop W32time /Net Start W32time
Some have idea about of this problem?
Hugo MongeHi Hugo,
>>W32time NTP server Windows Server 2012 o 2008 R2
Before going further, what does this mean?
Regarding how to configure an authoritative time server in Windows Server, the following articles can be referred to as reference.
How to configure an authoritative time server in Windows Server
http://support.microsoft.com/kb/816042
Configuring a time source for the forest
https://technet.microsoft.com/en-us/library/cc784800(v=ws.10).aspx
Best regards,
Frank Shen
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Server 2012 X64 R2 DNS Server keeps shutting down after inplace upgrade from Server 2012 X64
Hi,
ever since upgrading from Server 2012 X64 to Server 2012 R2 X64 my dns server keeps shutting down every several minutes before having to do a restart. When viewing the event log this is all I see..
The DNS Server service terminated unexpectedly. It has done this 497 time(s). The following corrective action will be taken in 60000 milliseconds: Restart the service.
if I look in the Application Error Log, I will also find the following:
Faulting application name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Faulting module name: dns.exe, version: 6.3.9600.17031, time stamp: 0x530871fb
Exception code: 0xc0000005
Fault offset: 0x000000000010b0e0
Faulting process id: 0x1740
Faulting application start time: 0x01cf531b2e3a7f5e
Faulting application path: C:\Windows\system32\dns.exe
Faulting module path: C:\Windows\system32\dns.exe
Report Id: 90a4ab37-bf0e-11e3-9446-003048df3f03
Faulting package full name:
Faulting package-relative application ID:
I have tried removing and then reinstalling the DNS Server role, but the same situation occurs..
thanks,Hi,
I'm going crazy, I've upgraded my Server 2012 Standard to Server 2012 R2 Standard and now my DNS server keeps crashing since the in place upgrade. I have finally narrowed it down to it only crashes after several minutes if I load the data from
a file instead of the registry. As a test I:
-1- killed all my dns data,
-2- uninstalled the dns server role
-3- deleted the /windows/system32/dns directory
-4- reinstalled the DNS server role
-5- used the wizard to create a DNS server and a forward zone.
everything works okay, no crashes, then I change the advanced propertied of the DNS server to load from file, restart the DNS server and once again it crashes every 2 minutes..
Please help, this is killing me..
thanks in advance.. -
Downgrade HPC cluster from Windows Server 2012 to 2008 R2
Hi,
We have a customer that have bought a system with HPC Windows Server 2012 and need to downgrade to HPC Windows Server 2008 R2.
The customer thas gotten a Windows Server 2012 OEM DVD, so my question is how can we install the system with Windows Server 2008 R2, what are the practical steps like, where to find software, licenses keys etc...
Thanks for reply.
/Regards AndreasHi,
For the HPC question, please post in HPC support forum:
Windows HPC Server
http://social.microsoft.com/Forums/en-US/home?forum=windowshpcitpros
Thanks for you cooperation and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Downgrade Windows Server 2012 License to WIndows Server 2008 R2
Hi all,
I'm looking to downgrade a windows server 2012 open license to windows server 2008 r2.
Thing is i do not have an existing windows server 2008 r2 VLK.
Can anyone confirm that this downgrade is possible, as clearinghouse is not helping by telling me that i can't buy windows server 2008 r2 licensesClearinghouse is right in stating you can't buy Windows Server 2008 R2
licenses anymore.
You'll need a Windows Server 2008 R2 disk kit and product key. They'll sell those to you, since you already own a license that allows you to install and use the software as part of your Windows Server 2012 license. -
SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)
I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :) -
Network Drives Losing Connection from Server 2012 to Windows 7 64bit Machines
I have about 20 users at my facility and recently upgraded our server from one running server 2003 to one running server 2012. Since that occurred, I have had numerous issues that I did not encounter on the old server.
Lately, users have been losing connection to the shared network drives randomly and constantly. The drives will come back on-line on their own but it could be 2 minutes or 30 minutes before they do and when users are in the middle of working on a document
from the network, they are unable to save until the drive comes back. Manually disconnecting and re-mapping them works sometimes but then the problem will re-occur. I have tried re-doing the shares and security settings and run a couple of supposed hotfixes
on the client side and the server side to no avail.
Now our regional office is suggesting that I re-connect the old server and then rebuild the new one with server 2008 r2, something I would like to avoid if possible.
I feel like this is a simple setting that I am missing, no conditions have changed except for the new server.
The server is a Intel Xeon CPU E5-2609 2.40GHz with Server 2012 64 bit on it. All computers (except on on 32 bit) are running Windows 7 Enterprise edition 64 bit.
Please help.I made this change to the registry on the server and am waiting to see if I have any more drops.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanserver\parameters
Value:
autodisconnect
Data
type : REG_DWORD
Value:
ffff (Hex)
There was a client side change suggested but I am missing that value for the client side change and others in the organization who don't have it are not experiencing this problem. -
In-place upgrade from Server 2012 to 2012R2 "just quits"
I have a TechNet subscription and am supposed to get "priority support" but I mistakenly asked my question in one of the forums that is not in the "priority support monitored" list. Included here by reference:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/bbbb34f2-e098-4f7d-b692-88e033869385/windows-server-2012r2-inplace-upgrade-from-2012-quotjust-quitsquot?forum=winserver2012r2previewsetup
Short description: On the 2012 DataCenter machine which serves as my Hyper-V host, I mount the install media and launch Setup. It starts, copies the temporary files ($windows.~bt) and then just quits.
Content of c:\windows\setupact.log:
2013-10-11 10:29:04, Info UI Determining whether we should run ConX or legacy setup
2013-10-11 10:29:04, Info UI Downlevel OS is server. Continue to run legacy setup
2013-10-11 10:29:04, Info UI Determining if we are in WDS/Unattend mode
2013-10-11 10:29:04, Info UI No need to hide autorun
2013-10-11 10:29:04, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2013-10-11 10:29:04, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2013-10-11 10:29:04, Info UI AppWindow has layout style 0
2013-10-11 10:29:04, Info UI NavWindow has layout style 0
2013-10-11 10:29:04, Warning [0x0a0180] UI Failed to change the UI language to en-US.
2013-10-11 10:29:04, Info [0x0a011c] UI WizardDialogPost::SetActive
2013-10-11 10:29:09, Info [0x0a018e] UI Passing command line parameter ("H:\Sources\setup.exe /HideWelcome /uilanguage:en-US /targetlanguage:en-US") to IBS.
Would appreciate any suggestions that don't involve doing a detailed documentation capture of how the server is configured followed by a clean install, that is what I'm trying to avoid if possible.
I am not trying to do anything special or scripted, just a standard OS upgrade.Hi Pepper, Malort, Robert and Brandon,
I am experiencing the same issue using either new release (april 2014) or the gold release 2012 R2 DVD from Volume license (SA) download. Both confirmed working on other installations. Setup just suddenly quits with the same non existent logs
files in $windows.~bt and c:\windows\setupact.log has a warning statement "Failed to change the UI language to en-US"
The server is running as a vm and would otherwise appear to be running perfectly. It is a DC(GC), DHCP, DNS & CA for my site.
Going to try System Update readiness Tool KB947821-v33.
Heads up MSFP Anne, any word on the cause and/or fix?
Regards,
Andre
Same here,
trying to upgrade a server 2008 R2 server running on hyper-v to server 2012 R2 with update1.
The server was a server 2008 and was upgraded to server 2008 R2.
This is the only log i can found:
2014-07-04 14:20:13, Info UI Determining whether we should run ConX or legacy setup
2014-07-04 14:20:13, Info UI Downlevel OS is server. Continue to run legacy setup
2014-07-04 14:20:13, Info UI Determining if we are in WDS/Unattend mode
2014-07-04 14:20:14, Info UI No need to hide autorun
2014-07-04 14:20:14, Info [0x0a000a] UI Autorun:Autorun core successfully initialized!!!
2014-07-04 14:20:14, Info [0x0a000b] UI Autorun:Autorun UI successfully initialized!!!
2014-07-04 14:20:14, Warning UI CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
2014-07-04 14:20:15, Info UI AppWindow has layout style 0
2014-07-04 14:20:15, Info UI NavWindow has layout style 0
2014-07-04 14:20:15, Warning [0x0a0180] UI Failed to change the UI language to nl-NL.
2014-07-04 14:20:15, Warning UI CLanguages::v_InitLanguage - Failed to load en-US resources with error 2. Will load fallback binaries
2014-07-04 14:20:15, Info [0x0a011c] UI WizardDialogPost::SetActive
2014-07-04 14:20:16, Info [0x0a018e] UI Passing command line parameter ("D:\Sources\setup.exe /HideWelcome /uilanguage:nl-NL /targetlanguage:nl-NL") to IBS.
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 16 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 17 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 18 key on 0
2014-07-04 14:21:03, Warning [0x0a0010] UI WM_KEYUP for 9 key on 0 -
Moving user profiles from Server 2012 with RDS services to User profile disks Server 2012R2
Hello i have a question about moving my C:\users profiles.
My current settings on the servers are:
AD-Server 2012
SQL-Server 2012
TS- server with RDS roles (RDwebacces, RDs broker, RD session host) 2012
everything about user profiles is now in C:\Users
My new settings for the server will be:
AD-ActiveDirectory - server
SQL-Server
TS1- RDS (RDwebacces, broker, RDS server group management) 2012R2 (I have enabeld userProfileDisks to Filesistem server)
TS2- RDS(Session host) load balance 2012R2
TS3- RDS (Session host) load balance 2012
FileSistem - server ( here i will have on E: partition the new functionality UserProfileDisks) 2012R2
So is there a way to move profiles from TS - C:\Users to FileSistem - E:\UserProfileDisks
I am new to this so any idea wil be helpful.Hi,
If the UPD is configured on the server which holds existing user profiles, just select the option:
store all user settings and data inside the profile disk.
Since you are moving user profiles between different servers, then user profile contents need to be migrated manually.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
Can't download files on Android from Server 2012 Essentials Remote Web Access
I have two servers, one with Windows Server 2012 Essentials, and the other SBS 2011. Employees like using Remote Web Access to log in from anywhere and have access to shared folders. It works perfect on a Desktop computer, but when they try to
use their Android tablets or phones, and want to download a file (e.g. a PDF) from one of the shared folders on the server, the download fails. When Microsoft was pushing 2012 they said RWA worked great on mobile devices, do I have to set up something
separately to make this happen?
I've completely disabled the firewall, and have ports 80,443,987, and 1723(just to be safe) all forwarded to the server.
I can log into the RWA site on the android, browse files and folders, but when I select a PDF to download, the download shows as if it's starting, shows in my android notification as if its going to start downloading (Shows MobileDownload www.mydomain.com)
but eventually after a few minutes, will time out and show "Download Unsuccessful".
Network connectivity is fine as I can do this on a Windows Desktop PC using any browser (Chrome, Firefox, IE) and successfully download anything I want.
UPDATE: I found this in the event handler when I tried to download something from a mobile device...
- System
- Provider
[ Name] ASP.NET 4.0.30319.0
- EventID 1309
[ Qualifiers] 32768
Level 3
Task 3
Keywords 0x80000000000000
- TimeCreated
[ SystemTime] 2014-01-12T16:49:12.000000000Z
EventRecordID 72818
Channel Application
Computer MYSERVER.MYDOMAIN.local
Security
- EventData
3005
An unhandled exception has occurred.
1/12/2014 11:49:12 AM
1/12/2014 4:49:12 PM
953eedf1ad414391a193e5f98a281da5
263
3
0
/LM/W3SVC/1/ROOT/Remote-1-130340167702975633
Full
/Remote
C:\Program Files\Windows Server\Bin\WebApps\RemoteAccess\
MYSERVER
2592
w3wp.exe
NT AUTHORITY\NETWORK SERVICE
HttpException
Server cannot set content type after HTTP headers have been sent. at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)
https://remote.MYDOMAIN.com:443/Remote/fs/MobileDownload.aspx?path=\\MYSERVER\PICTURES\2013603.jpg
/Remote/fs/MobileDownload.aspx
MY.IP.ADDRESS.141
MYDOMAIN\user
True
Forms
NT AUTHORITY\NETWORK SERVICE
31
NT AUTHORITY\NETWORK SERVICE
False
at System.Web.HttpResponse.set_ContentType(String value) at System.Web.UI.Page.SetIntrinsics(HttpContext context, Boolean allowAsync) at System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) at System.Web.UI.Page.ProcessRequest(HttpContext context) at Microsoft.WindowsServerSolutions.Web.RemoteAccessSite.RealPageHandler.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)Hi,
Before going further, would you please let me confirm something firstly?
Would you please let me know if all Android devices
encounter this same issue? If you download different type files, will still this issue persists? You can upload a small file (such as a text file) to the share folder, then check if Android device can’t download it.
Based on your description, when logon a desktop computer, you will download files via RWA successfully. Please use the user account which logon computer to logon
the Android device, will still fail to download?
Please check if there has enough free space in Android devices that be used to save download.
When this issue occurred, please check the state of Android device in Dashboard. Besides, I suggest you should run the Best Practices Analyzer (BPA) and fix all
it can find. Then monitor the result.
Run the Windows Server 2012 Essentials Best Practices Analyzer
http://technet.microsoft.com/en-us/library/jj200181.aspx
In addition, regarding to the Event ID 1309, please refer to the following articles.
Event ID: 1309 Source: ASP.NET 4.0.30319.0
http://www.eventid.net/display-eventid-1309-source-ASP.NET%204.0.30319.0-eventno-11022-phase-1.htm
Hope this helps.
Best regards,
Justin Gu -
Hi,
Having an issue redirecting to a local printer when using a remote desktop session initiated through from a Essentials 2012 R2 server via remote web workspace on a Win 8.1 client, it doesn't pick up the Local printer, or even give the option of which
local resources to use on connection, just goes straight through and displays the remote desktop on connection.
I know its not a server global policy issue as it works fine on a Win 7 client with the same user being able to print locally whilst in a RD session
Any idea's as to how I can resolve this issue and enable local redirected printing or at least give me the options of specifiying which resources to connect on the local machine at the start of a session.
It's complicated I think as the essentials box is acting as the gateway so I cannot setup a session directly, the certificates are all working correctly so I am confused as to whats causing the issue.
Any help would be appreciated.Hi,
Thank you for posting in Windows Server Forum.
Please try to connect the printer with IP address and check the result. You can go through beneath article might helpful in your case.
Windows Server 2012 Essentials : Add a Network Printer
Try to change the selected print drivers:
1. Return back to the Devices and Printers window
2. Double click on your printer, and then double click on Customize your printer
3. Click on the Advanced tab, and change the print driver to the one we just installed.
4. If you wish, you can also click on the Sharing tab, and make the printer available.
More information.
Installing Network Printer to Windows Server 2012 Essentials
Hope it helps!
Thanks,
Dharmesh -
In-place upgrade from Server 2012 to 2012R2 is failing
Hello,
I'm trying tu upgrade a VM from Windows server 2012 to Windows Server 2012 R2, but the upgrade is failing with an error message "Windows cannot install required files. Make sure all files required for installation are available, and restart the installation.
Error code 0x80070522"
The VM i'm trying to upgrade has SQL server 2012 and some related tools installed
The VM is running on a Windows server 2012 Hyper-V host
I have tried a few different installation media, downloaden from the MS licensing site and from MSDN, but all give the same problem.
After searching for logs i found these relevant messages in C:\$WINDOWS.~BT\Sources\Panther\setuperr.log
2014-07-15 11:25:10, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:25:10, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {050ed09e-a530-41e6-8ac9-a9a96e74a2c1}: [shmig] Failed to get launcher layout, hr=0x80070002
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-07-15 11:27:04, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
// a lot of these kind of messages
2014-07-15 11:27:55, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-07-15 11:27:55, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-07-15 11:28:24, Error [0x0808fe] MIG Plugin {65cbf70b-1d78-4cac-8400-9acd65ced94a}: CreateProcess(s) failed. GLE = d
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMJPMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMJPMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\IMKRMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\IMKRMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\CHXMIG.DLL)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\CHXMIG.DLL) gle=0
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibraryEx error (C:\$WINDOWS.~BT\Sources\ReplacementManifests\Microsoft-Windows-TextServicesFramework-Migration\TableTextServiceMig.dll)
gle=126
2014-07-15 11:28:29, Error [0x0808fe] MIG Plugin {0b23c863-4410-4153-8733-a60c9b1990fb}: LoadLibrary error (C:\Windows\system32\TableTextServiceMig.dll) gle=0
2014-07-15 11:28:32, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:28:32, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:28:43, Error [0x0803b6] MIG Can't retrieve group information for user NT SERVICE\MsDtsServer110. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:28:43, Error [0x0803b6] MIG Can't retrieve group information for user IIS APPPOOL\Classic .NET AppPool. NetUserGetLocalGroups failed 0x000008AD
2014-07-15 11:31:35, Error [0x0808fe] MIG Plugin {ee036dc0-f9b7-4d2d-bb94-3dd3102c5804}: BRIDGEMIG: CBrgUnattend::CollectBridgeSettings failed: 0x1, 0
2014-07-15 11:33:25, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Failed to read machine binding, hr=0x80070002
2014-07-15 11:33:25, Error [0x0808fe] MIG Plugin {D12A3141-A1FF-4DAD-BF67-1B664DE1CBD6}: WSLicensing: Error reading Server Info hr=0x80070490
2014-07-15 11:33:28, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
2014-07-15 11:33:28, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
2014-07-15 11:33:28, Error [0x060082] IBS Callback_ImageTransfer:Failed to lay down the WinPE image; hr = 0x80070522[gle=0x00000057]
2014-07-15 11:41:11, Error [0x0606cc] IBS WIMApplyImage failed; hr = 0x80070522[gle=0x00000522]
2014-07-15 11:41:11, Error [0x0600a1] IBS DeployImage:Image application failed; hr = 0x80070522[gle=0x00000057]
2014-07-15 11:41:11, Error [0x060082] IBS Callback_ImageTransfer:Failed to lay down the OS image; hr = 0x80070522[gle=0x00000057]
Can anyone help me with this issue?
Regards,
TomYes, domain admins are members of the local administrator group when the macine is joined to a domain, but the opposite is not true. Local admins are not necessarily members of the domain admins group.
. : | : . : | : . tim
Tim,
Yes i Understand that a local administrator is not always a domain administrator, but i think this has nothing to do with my problem.
To be sure i have logged in to this server with the local administrator user and started the upgrade again. As expected I got the same error message, so this is nog a permissions problem.
Can somebody who can help me to solve this probleem?
Regards,
Tom -
Unable to uninstall or remove ADFS Service Proxy and Web Agents from Server 2012
I have a Server 2012 machine that's a primary host for company websites. An inexperienced developer (with FAR more access than he should've had; yes, epic fail) was able to install ADFS Service Proxy and ADFS 1.1 Web Agents (for SAML) on the server. He didn't
complete the configuration, realizing he'd over stepped his boundaries. He did install the rollup update 3 to ADFS though. However, now I'm unable to uninstall the components. It's not listed in the updates and the option to remove from Roles/Features is grayed
out.
Any help would be awesome!Hi,
Thank you for your sharing!
Your post is very beneficial to other people who have similar issues.
Please feel free to let us know if you encounter any issues in the future.
In addition, here is a dedicated ADFS forum below:
Claims based access platform (CBA), code-named Geneva Forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=Geneva
Best Regards,
Amy
Maybe you are looking for
-
Addition of two more column in Operation overview of inspeciton plan
Dear Experts, I want to add two more additional column in operation overview of Inspeciton plan. Please suggest & how it has to be achieved. Thanks in advance.
-
Officejet 6500 709e LCD display doesn't display all pixels
A week ago my wired printer stopped displaying all the pixels on the LCD display. I can't, at this point, understand anyhting on the first or second lines. So I don't know how much ink I have in each cartridge (which usually shows on the second lin
-
Dual gpib cards in the same network with NT4
Is it possible to use 2 Pc as masters on the same GPIB network. For now we have to disable CIC for the PC that is inactive but this is awkward since we allways have to log in to both PC's. BRG Anders Olme
-
Trouble with a bindVar function in the reflection
Hello everybody! I have some trouble with using FXObjectValue.bindVar(...) function. I'm getting java.lang.UnsupportedOperationException: unimplemented: bindVar exceprion :( I loked up to source code of JavaFX and I can't find implementation this fun
-
Saving data on form will not save
I know I am missing something. We have a form that we use only once a year to populate data. And now when the form is open for users, they enter in the cells and hit save and then receive 'data is saved' yet the cell is blank. As an admin I cannot sa