Download Airport Extreme Software for Windows?

I am trying to find the windows software that comes on the CD for an Airport Extreme. (Attempting to help my Mom get her existing Airport Extreme w/ USB drive hooked up to her new windows laptop - the 802.11 connection is fine)
Where the bloody **** is this software!? I've wasted hours on this support site looking for the basic install software. I've found the 5 year old airport admin software and lots of firmware updates. But I just want whatever comes on the CD so my mom will get the system tray icon that allows her to map the USB drive from the airport (the ability to manage the airport wouldn't hurt either).
If you know where it is, please post a link. If apple only releases it on CD (which would be ridiculous) please put up a page that says so on your support site.

Hello treyguinn. Welcome to the Apple Discussions!
Here you go: AirPort Utility Setup 5.3.2 for Windows

Similar Messages

AirPort Extreme Drivers for Windows XP???

This may be a very silly question, but I've got a new Mac Pro that will be arriving in two days and I couldn't help but wonder, "How will the AirPort Extreme WiFi card be able to connect to the Internet when I'm running Windows XP from a separate hard drive using Boot Camp?
The Internet connection in my apartment is wireless only (coming from a router upstairs in my landlord's part of the house). Are there any AirPort Extreme drivers for Windows XP? If so, I have not been able to find anything online.
Any suggestions on how to do this?
Thanks,
~Greg

Thanks for the info Stefan,
However, I don't think that the Macintosh driver CD will do me any good in this case because I am not planning on running the 32 bit version of Windows XP. I will be installing XP64 tomorrow once my CD arrives in the mail.
I've heard of quite a few people who are currently running XP64 on their Mac Pro's, but I'm also pretty sure that the driver CD created by Boot Camp will only work in Windows XP 32-bit.
If ANYONE knows of a work around for installing macintosh drivers for my super drive and airport extreme, PLEASE let me know, because I will most certainly need to be able to use my wireless card and keyboard (especially for the CD tray)
Thanks,
Greg

How can I download airport extreme software on new windows 8 computer?

How can I download airport express software on new Win8 computer? keep getting error message saying that I need Win7 or newer.

AirPort Express needs AirPort Utility 5.6.1 for Windows.
AirPort Utility 5.6.1 for Windows - Support - Apple
If that won't run on Windows 8, then you best call Apple Support.....or borrow an iPhone or iPad for a few minutes to set up the Express.

Not able to download Actice Sync software for windows XP

Dear All,
The below link is not working, how i can downloadActice Sync software for windows XP, please help.
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/activesync45.mspx
Faisal Inam
0092-321-6329059
[email protected]
Post relates to: Treo Pro T850U (Unlocked)
This question was solved.
View Solution.

Hi.. Welcome to the Palm forums. I just tried the link that you had and was able to succesfully download activesync for XP. Try it again, if it still does not work try going to google and do a search for "download activesync 4.5" which should give multipul options for the download. If that does not work then the problem is on your end and you may need to talk to a computer repair shop.

Airport Extreme Setup for Windows Remote Desktop

I have an AEBS with a Windows XP desktop connected to it via ethernet (I also connect my MacBook wirelessly).
I want to set it up so I can connect to my desktop remotely from work. I was able to do this using my old D-Link router but since I switched to the AEBS I can't connect. I am pretty sure I opened the correct ports in the router but I must have missed something.
Does anyone know if there is a step-by-step guide that can help me?

Here you go ...
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): <enter the appropriate UDP port values>
o Public TCP Port(s): <enter the appropriate TCP port values>
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

HT5628 When I try to download the support software for windows 8 it says the USB I have plugged in needs to be a single FAT partition, and I have a timemachine back up on the disk, how do I format my USB correctly?

Need help partitioning a USB correctly for Windows 8.

you format it in disk utils
and choose fat as filesystem

HT2305 How do I download Airport Extreme for a PC?

How do I download the AIrport Extreme Utility for a PC on Windows 7?

Click the link below
AirPort Utility 5.6.1 for Windows

Is there anywhere to download original Airport Extreme software?

I need to download both Windows and Mac versions of the software that was on the (since lost) original CD-ROM that accompanied my Airport Express.
I have perused this forum, but haven't seen a definitive answer yet - and I can't seem to find anything on Apple.com downloads for AE except for updates (requiring the original software be installed).
The has nothing to do with the "n" enabler .. just simply need to reinstall this software to use an AE that I had misplaced for about 1.5 years.
Thanks!

AirPort 4.2 for Mac OS X 10.3.3:
http://www.apple.com/support/downloads/airport42formacosx1033.html
Although it says it is an update I'm pretty sure it will install what you need without being there before. It may require you have an Airport card installed.
AirPort 4.2 for Windows
http://www.apple.com/support/downloads/airport42forwindows.html

Problems After Updating Airport Extreme Software & Firmware

Lost wireless connection to my printer while attempting printing from either desktop or laptop & when I tried to re-establish/update the wireless settings, I received message that new versions of software & firmware were available for my Airport Extreme. After I downloaded & installed both of these, I could no longer connect at all to the Airport Extreme. When I used the Airport Assistant to try to solve problems, it said airport was out of range. Also only got flashing amber light on Airport Extreme no matter how many times I tried to reset it and DSL modem (went through complete re-connect/re-install of both Airport Extreme and DSL modem hardware). I switched to an extra Airport Express I have and now everything is backing working again. Any known problems with either the latest Airport Extreme software (Airport Utility 5.3.2) or firmware (version 7.3.2 I think)?

Firstly, on the Mac you use to configure the AEB, Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
I see you are using 10.4.11, so the steps in Part B may be a little different (this is for 10.5.x).
Use this procedure to setup your network again:
A. Setup the 'Main' Base Station
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main) - leave off for at least 5 minutes to allow servers to reset.
2. Check that ethernet cables are connected properly:
- DSL Modem > AEB (main) WAN port;
- AEB (main) ethernet port > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP'. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Airport extreme software will not install on vista, how can i still configure the router?

airport extreme software will not install on vista, how can i still configure the router? Trying to help someone with vista get an airpot extreme configured. 10.0.1.1 does not work, the software will not install correctly on their vista machine. How can I get into the base tation and lock it down?

Hi - Vista can be tricky - I need more info to see if I can be of some help - first, is the Vista machine a desktop or a laptop and is it fully up to date with Windows Update (sp2 or higher)? - next, are you trying to install Airport Utility version 5.5.3 which is the correct one for Vista? - and finally, what do you mean "it will not install" - what kind of error messages or evidence are you getting?

I need help putting Airport Extreme software on my Mac

I have an Airport Extreme, with software loaded on a PC. What do I need to down load to get Airport Extreme software on my new Mac. The software (on a disk) that came with the Airport Extreme will not work with Lion. I have to believe that this question has been asked before. If so, please point me in the right direction. Thanks for any help. bhjohnston (Easey, SC) 11DEC2011

You likely already have the AirPort Utility application on your new Mac.
Open Macintosh HD > Applications > Utilities > AirPort Utility
AirPort Utillity 5.5.3 is the current version
If for some reason, you do not have it, you can download it from here:
AirPort Utility 5.5.3 for Mac

Cannot install HP Officejet 5610 software for windows 8

Hi there
I am running Windows 8 (64-bit)
I have downloaded the HP software for the Officejet 5610 All in One. When I try to run/install the software, however, it tells me that the file is corrupt.
How do I get around this?
Thanks,

Hi there
I can print - the drivers downloaded automatically when I plugged the printer in - but I need the HP Solution Centre Software - I do a lot of scanning and need it for that.
I have still been unable to install the software. It took over a day to download/save the installation file (AIO_CDB_NonNet_Full_Win_WW_140_408), which is supposed to be 412 MB. Only 358 MB downloaded. When I run it, it says file corrupt. I am running windows 8 on a brand new, top of the range Dell How can I get this software to download? Thanks!

How do i install airport extreme on a windows pc and route it to another windows desktop?

How do I install airport extreme into a windows desktop pc and then successfully route it to another windows desktop?

The AirPort Extreme Base Station (AEBS) is an Internet router that supports both wired and wireless network clients. You can connect both of your desktop, using either media, to the AEBS for network connectivity.

Downloading iTunes 7.6 for windows not working properly

OK, I downloaded iTunes 7.6 for windows 3 separate times. The first time after completing the download, an error message popped up that states: "iTunes cannot run because some of its required files are missing. Please reinstall iTunes." Well I went back to your site two more times to download the software again, each time I get a pop-up that asks if I want to remove iTunes or repair it, each time I select REPAIR and it goes through the download process and says it is complete. Then each time I attach my shuffle, that error message pops up again and says there that iTunes is missing files. SOMEBODY PLEASE HELP!!!! I CANNOT ATTACH MY SHUFFLE TO ACCESS MY MUSIC!!!!

http://www.oldversion.com/program.php?n=itunes

Mac-specific drivers and other software for Windows

Mac-specific drivers and other software for Windows how can I download them with out the install cd?

Or for the same price you can order a new Snow Leopard disk. http://store.apple.com/us/product/MC573Z/A?mco=MTY3ODQ5OTY
That would give you Boot Camp 3.0 drivers. With Snow Leopard and Boot Camp 3.0 you can install Windows XP, Vista or Windows 7. With Lion and Boot Camp 4.0 you can only install Windows 7. If you install Lion with Boot Camp 3 and XP or Vista already on it it will work.

Download Airport Extreme Software for Windows?

Similar Messages

Maybe you are looking for