Download all roles Individually and list all the SAP standard roles
Hi ,
I have two questions .
1. I want o download all the roles individually in SAP.
2. I want to list all the SAP standard roles whose profile is generated.
Can anyone help me . to achieve this
Dear,
I am no sure what kind of problem you have faced that requires revert back. Which took 2 days. If it's for mass role revert back then mass role download should work. If it few selective role then change history should help you out.
Anyway I might pull this out of the topic.
Even you download mass role in a single file then also if you want then can upload a single role only with 2-3 mins spending on replace function in notepad!!
Let say you have taken 1000 role in a single file and want to upload a specific role only. Open the file (copy of the file) in a notepad. Now replace(Ctrlh) LOADED_AGRS with nothing. Find(Ctrlf) the role you want to upload. In begining of that line paste LOADED_AGRS
Above file will upload the specific role only.
Regards,
Arpan Paik
Similar Messages
-
My iPod Touch is running on ios 7. In the last two and a half all the apps of my iPod have been suddenly wiped out twice. I had to download all the apps all over again. Why has it happened?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?
Try this:
http://support.apple.com/kb/HT2519 -
I have a 3g iPhone and a new epson imprint compatible printer but the iPhone can't see it. I have downloaded all the software.
But my phone does not recognises the printer. Can anyone Help? Thanksto trouble shoot look here http://www.apple.com/support/iphone/assistant/airprint/#section_1
-
Kids ipod gets the 13019 error after trying to sync. I have done all the suggestions online and now it has no music and will not sync.
It seems to download all the music and on the last song clicks out and says unknown error.
any other suggestions?
Kid is mad now there is NO music on the ipod. At least before it had the old music and just would not download new songs.
All worked on our iphones, and other ipods. Just hers is wacked.
thanksI've encountered the same problem as this recently, but unfortunately i haven't worked out how to fix it yet.
I tried to fit too many songs on my ipod nano from itunes, and it told me it would create a selection of these (titled my songs) and put them on the nano, which it did. I then went back onto itunes to delete some songs so that they would all fit on the nano. I also deleted the "my songs" playlist, knowing that all the songs were still stored under Music on itunes. When i tried to sync the nano it said that it couldn't be synced as the required disk cannot be found.
HELP, PLEASE! -
I would like to download all the music on my ipod nano to my itunes account on my new computer. How can I do that? Thank you.
Can I still get music from the iTunes store and add them to my playlists?
-
When I plug in my ipad it automatically tires to back up and download all the contents to the C drive - the PC is too full and I have iTunes on an external hard drive, how do I tell the system to do the backup to the hard drive please?
You can open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up.
To move the current backup folder from C: to D: type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your external drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
tt2 -
I just bought 15' Mac book pro. as i work a lot on Garageband. I even downloaded all the drummers and loops to update the new Garageband 10.0.1
now my problem is that all my past work which i did on older version on GB, has missing sounds in it. so here are my questions
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
thanks3. There is an UPDATE on the new GB on Appstore and once i click it, it goes to billing no detail is provided what this update is for so help!
See: This document explains what the in-App purchase is about.
Expanding GarageBand for Mac (v10.0) content with an in-app purchase
Do you still have your old Mac?
How did you migrate from the old Mac to the new Mac? Did you transfer your old software and documents using Setup Assistant? Then your old GarageBand '11 version should have been migrated, and all your instruments.
if you did not migrate GarageBand '11, copy your old Instruments Library and Loop Library over from the old mac. Copy the following folders to a thumbsdrive and merge the missing dontents into the corresponding folders on your new mac: (from the system library - the top level library folder on your Macintosh HD):
/Library/Application Support/GarageBand/
/Library/Audio/Apple Loops/
And if you would like to continue to use GarageBand '11 for access to missing features, copy also /Applications/GarageBand over, but to a subfolder of Applications. I recommend, to install the old GarageBand as well. It can be used in parallel to GB 10.0, and will come in handy, if your old projects are having problems.
1. DO i have to install JAMPACKS on my new Macbook pro?
2. Are JAMPACKS still compatable with the new GB?
The JamPacks are nice to have, a terrific collection of instruments and loops, but if you did not have them previously, that will not help with your missing instruments. You can instll them by buying Mainstage 3. They work well with GarageBand 10.0
-- Léonie -
How do I download all the songs in my wish list at the same time?
How do I download all the songs in my wish list at the same time?
You don't.
This option was removed.
Apple has not stated why it was removed.
Suggestions here -> http://www.apple.com/feedback -
I just got a new iPhone 4S and tried to restore but it didn't finished downloading all the apps, tried to reset and restore again, but it wouldn't start over. What can I do?
http://support.apple.com/kb/ts3694
Check USB connections
If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
Common errors: 13, 14, 1600-1629, 1643-1650, 2000-2009, 4000, 4005, 4013, 4014, 4016, “invalid response”, and being prompted to restore again after a restore completes.
To narrow down the issue, you can also change up your hardware:
Use another USB cable.
Plug your cable into a different USB port on your computer.
Try a different dock connector (or no dock).
Add (or remove) a USB hub between your device and computer.
Connect your computer directly to your Internet source, with no routers, hubs, or switches.
If you see your error after changing your USB connections, continue to the next section to troubleshoot your hardware. -
hi, can someone help me how can i connected my multimeter to my pc with rs232, because my computer can´t recognize the device, i mean the multimeter, is a multimeter keithley serie 2400, and i already downloaded all the drivers for labview even the VISA
Marco,
Here are some suggestions:
1) Check the manual the Keithley manual to see how to configure the RS-232.
On some models you need set Factory defaults to USER and turn on the RS-232.
Also there may be a setting for SCPI which you want on (probably on by default).
2) On your PC - open Device Manager. See if a COM port exists and is functional.
You must get this working before continuing.
You can set the COM port parameters by right clicking and selecting Properties.
(On some PCs the onboard ports can be disabled in the BIOS)
3) If step two was OK, open MAX (Measurement and Automation eXplorer).
On the left side, click on Devices and Hardware.
Click on Serial and Parallel.
Go to the COM port you found in Device Manager.
Open a VISA Test Panel.
Now I don't have one I can look at right now, so this is general idea:
Configure the COM port to match the Keithley settings (should be OK if step 2 worked)
Go to the (I think) Input Output tab (you want to send a command)
The command string input should already have a *IDN? entered, if not, type it in.
Click on the Query button to send the command and check the response.
If you get an ID string back (Company name, Model, FW Version ...) then it works.
(Disregard an error saying it did not get enough charcters back.)
I hope this helps,
steve
Help the forum when you get help. Click the "Solution?" icon on the reply that answers your
question. Give "Kudos" to replies that help. -
i just update my iPhone which was previously jailbreaked when i update it after downloading all the file it start to show the apple logo for a moment and it went and completely turned off i tried to connect through iTunes but it doesn't show any iPhone connected to itunes
No support for jailbroken phones will be given in this forum or from Apple.
Unauthorized modification of iOS has been a major source of instability, disruption of services, and… -
Just wondering if I should update the latest Java software download and if so shoould I make any other changes on my old MBP? I have downloaded all the Java updates.
mendel- I have downloaded all Java updates. However several times I was told by an expert in this forum to check something and open Java pref and do something else. I did download it but my question was do I need to check or uncheck or do anything with Java Pref. I think the table is called. Just checking so that not only the downloaded was installed but anything else that nees to be done was done. this is why I ended up at this Security article which was way ovr my head.
-
I installed Mavericks a few days ago and downloaded all the available updates, which installed correctly (or so it says). Now I can't open my iPhoto app because it says it's being updated. Any suggestions?
There are two ways to recover from this condition.
1. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. Stop or resume the download.
2. Open LaunchPad and find the icon of the app you're trying to install. There will be a small progress bar below it. Click the "X" to stop the download. -
I have a networked HP L7780 all in one printer and I can not get it to fax through my Macbook Pro. I have downloaded all the drivers and it has passed all the tests. Every time I try to fax it shows the job paused. I can manually send and receive faxes but I can not do it through the computer.
Try deleting the printer, deleting the job queue and reinstalling the printer again.
Maybe you are looking for
-
Logical Operations in SQL decode function ?
Hi, Is it possible to do Logical Operations in SQL decode function like '>' '<' '>=' '<=' '<>' not in in not null is null eg... select col1 ,order_by,decode ( col1 , > 10 , 0 , 1) from tab; select col1 ,order_by,decode ( col1 , <> 10 , 0 , 1) from ta
-
Boot Camp no longer on my computer?
I use parallels with boot camp. I went to use it, and a window pops up with the following... "Virtual machine cannot be started because of the following problem: The Hard Disk 1 is set to use the Boot Camp while Boot Camp is not installed on this com
-
Slow folder item previews when opening files in Photoshop CS3
Can anyone advise me on the best way to improve the speed of previewing folder items/contents when navigating to items through the photoshop CS3 file finder? For some reason, one of my studio Macs, running Mac OS 10.4.1, and PShop CS3 takes ages to b
-
Is there a way to test a remote ftp destination?
Before submitting a task with a remote ftp destination I would like to test if the ftp login I've entered is working. Is there a way to do this in Compressor? Will Compressor put the file somewhere locally as well if uploading for some reason fails?
-
I have started the above pet it ion at: www.pet it ion online.com (no spaces) Search for Final Cut Server or FCS. Please sign it, I would love to get this product back.