Download an s-record file. Works with hypterminal,doesn't work with meas studio.

Having problems downloading s-record to unit under test. Hyperterminal downloads file in seconds. But, measurement studio takes a long time, have to send file byte by byte. Don't get correct return value when sending file. Tried Xmodemsend function. Com port is set for direct connection.

This is going to be hard to solve without a little more information. Can you let us know what libraries you're using (NI-Serial, NI-VISA, etc), and maybe provide the code that's exhibiting the problem? I believe XModemSend is part of the LabWindows/CVI serial library - is that what you're using, and if so, are you using from Microsoft Visual C++ or are you developing with LabWindows/CVI? If the latter, you might get a better answer to your question from the LabWindows/CVI forum.

Similar Messages

  • I have downloaded my latest flash player and it still doesn't work, why?

    I have downloaded my latest flash player and it still doesn't work, why?

    Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

  • I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    I upgraded to Lion and now can't print PDF files and Acrobat reader doesn't work anymore. What can I do to get it working?

    If you upgraded and were using a version of Acrobat Reader that was legacy, that is PPC compatible, then you will have to upgrade to a version compatible with Lion as Lion no longer has Rosetta to interface with the legacy software.
    I know that Acrobat, full version, 10 works with Lion...use it myself.

  • How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

    How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

    Your key cannot work in CC, it's newer version, and would require a new purchase.
    Downlaod CS5 here.
    Download CS5 products

  • I have ordered complete version, but there is no premiere and after effect to download. My old account (also complete version) doesn't work either.

    I have ordered complete version, but there is no premiere and after effect to download. My old account (also complete version) doesn't work either.

    If you machine does not meet the system requirements for any applications, those applications will not be listed for installation.
    Premiere Pro - http://helpx.adobe.com/premiere-pro/system-requirements.html
    After Effects - http://helpx.adobe.com/after-effects/system-requirements.html

  • Cropping pictures with Viewer doesn't work.

    Cropping pictures with Viewer doesn't work.
    Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
    Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

    I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
    Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
    I would try:
    Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
    if that doesn't help, then I'd reinstall Mavericks over your current installation.

  • HT2404 I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!

    I'm trying to update apps and download new ones on mi ipad, but it doesn't work... the icons say "waiting" and nothing happens for days!Help!

    Here are a bunch of things that you can try to get the downloads to resume.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
    You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
    You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your app preferences and device settings again.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

    How come my iPad with iCloud doesn't sync with my iPhone 4 that has same apple id and both ios5?

    Not sure if you just have an issue with your setup or something else.
    I had an issue where my numbers and pages documents were not syncing on my ipad, but were on my iphone. 
    I turned icloud off an on, reset the apps, even deleted them and reinstalled them.  I also checked all of the other icloud setting. 
    Only thing that worked (and it might be just a fluke)  I emailed from my iphone a numbers document to my ipad.  I opened then closed the document and the app.  When I opened it back up it started importing my icloud documents.
    If it is a settings issue then you need to be sure you have icloud setup in your mail settings.  Has to be there and active. 

  • My camera is not working. the app doesn't work

    Hi dear, My camera is not working. the app doesn't work: I'can't open the app either. It only works using skype, facing me. On the correct side is frozen. tks, bye, Federica

    Have you tried force quitting the Camera app? http://support.apple.com/kb/ht5137
    If that fails:
    Try doing a hard reset: Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears. If that doesn't solve the issue, you could also try backing up the device and restoring the device as new. If that doesn't solve the issue, the device may need service.
    Follow the steps in: http://support.apple.com/kb/HT4137
    NB: set up as a NEW device because a software issue will be in the backup. If the issue persists after restoring as new, you should offer the device for service.
    If you're not able to restore the device, this one might help: http://support.apple.com/kb/HT1808
    Good luck

  • I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files.  I have downloaded plugin for the camera, but it still doesn't work.  Can you help?

    I have Lightroom 4 and a new 70D camera and when I try to important my photos Lightroom says it doesn't recognize my CR2 files.  Can someone help?  I have downloaded 8.3 from Adobe, but still doesn't work?

    Lightroom doesn't use the Camera Raw plug-in. All of the Camera Raw technology is part of the Lightroom program. You will either have to upgrade to Lightroom 5 or use the DNG converter to create digital negative copies that can be used with Lightroom 4.

  • Single or double click with thumb doesn't work well on trackpad since upgrade to mountain lion

    I'm using a 2009 MacBook Pro recently upgraded from Snow Leopard to Mountain Lion.
    The internal AND external trackpad behavior is disappointing compared to Snow Leopard.  Neither one seem to register my thumb single or double click unless I do it pretty hard. For instance, selecting a word or double click to select a line. 
    A single finger works better but it's inconvenient to change years of training. 
    Sometimes I tap w/ my thumb on a button or link and it works and sometimes and I get no response until I use my finger.  It's like the trackpad sensitivity is off. Single tap only half works.
    I was really efficient with the old trackpad behavior and my thumb.
    Any suggestions?
    Thanks.

    I'm the OP and I'm the one that listed the problem originally. I spent an hour with apple care and the genius level two guy suggested I wipe my whole system. LOL, for a 40MB app, yeah right. The issue with Safari 6 is javascript, according to yahoo javascript is turned off. If you try to change your classic yahoo mail to the newer version it will give you a javascript turned off error. So for whatever reason Safari 6 has javascript turned off even though it is clicked ENABLED in preferences. Crazy. I did find my solution though and that was to dump Safari 6 by giving myself "read and write" permissions and then dumping the safari chache, plist, and preferences files. Then I installed Safari 5.17 by downloading the dmg from the net using PACIFIST. I had complete directions but somebody at apple decided to delete the whole post.

  • Can't Join Group Chats, Can't Receive Files, and Skype Home Doesn't Work

    Okay, so back when Windows 8 was newer I got my current laptop and when I saw Skype's original Windows 8 design, I said hell no to that and downloaded an earlier version of Skype instead. When Skype did that big overhaul and stopped support for all older versions, I was at least happy to see it was back to being on the desktop instead of that Windows 8 pseudo-tablet nonsense. But at the same time, I stopped getting notifications from Skype Home - it always says it's unavailable. Some time after that, in between Skype's updates, I started having trouble with Groups. Every time someone tried to add me to one, I couldn't see it, even if they said I was in it on their screen. Eventually I had to start making all Group Chats myself, because at least then it worked for me... up until the 7.7 update. Now no matter how I try to get into a Group now, it straight up doesn't work. And before I got locked out of Groups entirely, I started having issues with files, right around when the "inline photos" thing happened - they just don't work when sent to me, and I can't send them either. When people try to send them to me it's just a grey image and something about how it's not supported or it didn't go through.  I've sort of just been patiently dealing with all of it until the newest update when Groups stopped working entirely and I was in the middle of trying to join an important conversation. I Googled that specific issue and found a ton of unresolved threads about it dating back to at least 2013, I believe. I tried every suggestion I could find - I restarted, uninstalled Skype, reinstalled Skype, restarted after uninstalling and then reinstalling... the list goes on. Every time I got it back, it was the same. Now I'm on Windows 8.1, and I don't know if that's related, but my boyfriend - who uses a Mac - is having none of these problems whatsoever, and he also has the latest version of Skype.  With older versions of Skype not available, I ended up trying Skype Web, and it's letting me see all the Groups, which is the most important thing but I'd really prefer to go back to the desktop version. All three of my issues might be unrelated, but they've all progressed as Skype has updated so I figured I'd try to get help for all of them. I'm at my wit's end, here. I use Skype for a pretty large portion of my online communication, and being unable to use Groups or get files is really crippling the experience. 

    Hi,
    I have the same problem.
    Since I'm using my new Laptop with Skype 7.0, I can't join to a group chat.
    It's a public chat and joining is enabled.
    With my former laptop and former Skype-Version, I never had this problem.
    I could click on a link in the browser and joined to the group.
    I have to chose a program.
    Unfortunately Skype.exe seems not to be the right decision.
    I'm asked to get a Skype-app, which I never needed with the old version.
    Which kind of app do I need and how can I get the app or what else can I do?

  • After upgrade to IOS 8.3 sync with iTunes doesn't work

    After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
    On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
    Thanks

    you'll need to contact your carrier.

  • Image Policy when I create a PDF file: warn and continue doesn't work

    Hi!
    I need to create a PDF file with lots of images, and I need to know if any of that images is in low resolution (<300 ppi). I have tried to use the image policy in the PDF settings but it doesn't work, because if I choose "Warn and continue" (if the resolution of any image is <300 ppi, warn and continue) the program creates the PDF file but don't warm me and I don't see any message... and I'm sure that there are bad images because I have made a check test with 72ppi images.
    Thank you very much for your attention,
    best regards!!
    (Sorry if my English is not as good as it would be)

    Thank you very much Bernd Alheit, that's perfect for my job!
    Thank you!

  • Simple drag&drop with handler doesn't work in Edge?

    Hi all!
    I made this very simple example of Drag&Drop in Edge: http://www.terredainventare.it/simpledrag/simpledrag.html using Jquery Ui http://docs.jquery.com/UI/Draggable.
    I try to use the JQueryUi "handle" property that makes you drag an object restricting drag click on only one element but it doesn't work.
    Here's the code I've put in Edge onCompositionReady:
    sym.$("drag").draggable({ handle:"handler" });
    Of course my two Div-elements are called "drag" and "handler". Now the drag works only on the "wrong" element and not on the "handle".....
    Here's the Adobe Edge files: http://www.terredainventare.it/simpledrag/web.zip
    Many thanks in advance for your help!
    Davide

    So, on stage i add a rectangle named "drag" and i try this code:
    yepnope({
                nope:[
                'http://ajax.googleapis.com/ajax/libs/jqueryui/1.8/jquery-ui.min.js',
                'http://ajax.googleapis.com/ajax/libs/jqueryui/1.8/themes/base/jquery-ui.css'
                complete: init
    function init() {
             //$("#Stage_drag").draggable();
             //$(sym.lookupSelector("drag")).draggable();
             sym.$("drag").draggable();
    3 lines work: $("#Stage_drag").draggable() or $(sym.lookupSelector("drag")).draggable() or sym.$("drag").draggable()
    And css file is not required.
    Well, your dowload link is not perfect but i download your folder. See you later.
    There is a tutorial: a movie tutorial (adobe tv). Mix it baby! Extending Edge Animate 02:57
    They use: yepnope (both, callback)
    yepnope({
         both: ['jquery-ui.min.js',
                   'jquery-ui.css'
         callback: function(){sym.$("drag").draggable()}
    I will send you your files tomorrow (private message).

Maybe you are looking for