Download and install ADS on CE1 by SAP NetWeaver 7.01 ABAP Trial Version

Hi,
I came across many posts but no reply to a simple question: where can we download and how can we install ADS to run on CE1 and be used by SAP NetWeaver 7.01 ABAP Trial Version?
Then I saw some postings where guys were asking particularities on this issue which means, I guess, that they have downloaded and installed the thing.
Could you, please, provide some directions on this?
Or, if it is not possible, I would like to know that too.
Is there anyone who had success in doing this?
Thanks!
KR,
Igor
Edited by: Igor Barbaric on Oct 3, 2010 7:44 PM

Hi Igor
It seems, we have/had? similar problems.
Did you get any infos how to install / run ADS on your CE1 / NW 7.01?
I'm actually trying it with CE 7.2 and NW 7.02 trials.
Until now without any success.
Regards, Stefan

Similar Messages

Installing SAP NetWeaver 7.0 - ABAP Trial Version on laptop

Hi Experts,
Can any one help me to Explain the step by step procedure to install SAP NetWeaver 7.0 - ABAP Trial Version
on my laptop?
Regards
Sarath S

Hello Sarath,
here are some points you should keep in mind:
1. Download both parts of the trail version from SAP --> link to it
2. Each of both should have a size of about 1.4GB
3. Save both files in the same directory
4. Extract part1 with a zip-program like WinZip or WinRAR
5. Check that you have about 15 or 20GB of free space
6. Check that your hostname isn't longer than 13 characters
7. Verify that your computer is ping-able by the ip-adress and the hostname
8. Your user account has to be in the administrator-group of the computer
9. Deactivate the installed antivirus- and firewall-program while installing
10. If you had an older trail version already installed please check the steps in the first part of the following site to clean up your computer --> link to it ("Error code = 200...")
11. Stop all running programs, go to the extracted folder, start the start.htm, click on the entry Installation in the right navigation and finally start the Installer
12. Lean back for about an hour and cross the fingers that it will work
Also please don't use Vista - it isn't supported at the moment.
Hope it helps.
Good luck.
Regards,
Norman Schröder

Trouble Installing SAP NetWeaver 7.0 ABAP Trial Version

Hello everyone,
while trying to install the SAP NetWeaver 7.0 ABAP Trial Version some problems occured. I have downloaded both *.RAR files.
And extracted them.
Starting the Setup Wizard I can select the directory and set the master password. After it has started to copy files the setup process terminates with the log entry:
(Jul 11, 2007 8:48:27 AM), Install, com.installshield.product.actions.CopyFile, err, An error occurred and product installation failed. Look at the log file E:\sapdb\NSP\log.txt for details.
(Jul 11, 2007 8:48:27 AM), Install, com.installshield.product.actions.CopyFile, err, ProductException: (error code = 601; message="err"; additional data = [F:\Downloads\SAP\SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz does not exist])
STACK_TRACE: 22
ProductException: (error code = 601; message="err"; additional data = [F:\Downloads\SAP\SAPNW7.0ABAPTrialSP12\image\load\load_datasave.gz does not exist])
     at com.installshield.product.actions.CopyFile.install(Unknown Source)
Some more lines of Java Exceptions follow.
Can anyone please give me a hint what to do in this case.
Thank you very much in advance for you effort.
Regards,
Martin
Message was edited by:
        Martin Munkelt

(error code = 601; message="An Error happened during call of
MaxDB Tool sdbinst. Check end of Logfile
C:/DOKUME1/zuser/LOKALE1/Temp/MaxDBSAPNWPREV.log")
     at
com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown
Source)
     at
com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown
Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown
Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at
com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown
Source)
     at
com.installshield.wizard.service.AbstractService.invokeImpl(Unknown
Source)
     at
com.installshield.product.service.product.GenericProductService.installProduct(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown
Source)
     at
com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown
Source)
     at
com.installshield.wizard.service.AsynchronousOperation.run(Unknown
Source)
     at java.lang.Thread.run(Unknown Source)
Ich bekomme immer die obige Fehlermeldung. Ich habe aber alles
gemacht, wie es in der sdn.comunity beschrieben ist. Die aktuelle
Trial Version heruntergeladen, mit WinRar entzippt. Dennoch immer
wieder die obige Meldung. Installiere wollte ich auf meine externe
Festplatte (über 250 GB Platz). Was mache ich nur falsch. Ich
haben Windows XP und SP2. Weiss jemand Rat? Oder har Hilfe? Ich
bitte um Hilfe.
Viele Grüsse an alle
Torsten Braun

Error while installing SAP NetWeaver 7.01 ABAP Trial Version

Hi Experts,
While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
(Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:17 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:27 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:38 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:48 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
(Sep 26, 2010 10:30:58 AM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
(Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Sep 26, 2010 10:31:08 AM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
STACK_TRACE: 12
ProductException: (error code = 601; message="Services failed to start (see the log for details)")
     at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
(Sep 26, 2010 10:31:09 AM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed. Look at the log file D:\SAP\NSP\log.txt for details.
(Sep 26, 2010 10:31:09 AM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
STACK_TRACE: 15
ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
     at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Please suggest.
Thanks
Neeraj

> While installing the SAP NetWeaver 7.01 ABAP Trial Version on my pc (Vista) getting the below error.
>
> (Sep 26, 2010 10:30:07 AM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
<snip>
> ProductException: (error code = 601; message="Services failed to start (see the log for details)")
<snip>
I suggest you look at the log, the error you posted doesn't reveal much more than the fact a service didn't start which is needed by the installation process. Why it didn't start is not in this message.

Error installing SAP NetWeaver 7.01 ABAP Trial Version on Windows Vista

This is my second attempt to install. The first time the laptop froze during the MaxDB installation. I was not able to use uninstall.exe (did not exist), so I deleted the entire contents of the sapdb folder and also ran the registry clean tool, RegistryClean.cmd, before the second attempt. Any assistance would be appreciated!! Here is the contents of log.txt:
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\log.txt for details.
(Feb 15, 2011 11:19:04 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/OFFICE~1/AppData/Local/Temp/MaxDBSAPNWPREV.log")
     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)
     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)
     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)
     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)

Faisal,
Thanks for your response to my question. I have successfully installed VirtualDisk, however I CANCELED the "Create New Virtual Disk" setup at step 8 of your instructions because it states that you must select a size of more than 50GB. After installing VirtualDisk I only have 38GB of free space on my hard drive. System requirements for SAP NetWeaver 7.01 ABAP Trial Version states 25GB temporary for installation - 12GB permanent. Your instructions specify that an additional 3.5GB are needed for setup files bringing the total space to 28.5GB. Why are more than 50GB required?
If more than 50GB are required, then what are my options? (I have already removed unneeded software, files, etc., so I can't get more space on my existing hard drive.)
Thanks for your help!
Gary

Error after Install SAP NetWeaver 7.01 ABAP Trial Version

Hi Everyone,
I am new on SAP and I am getting this error after install SAP Netweaver 7.01 ABAP Trial version in my notebook.
It is Windows Vista Basic, 3GB of RAM, 2.1 Core Duo 2.
Installed successfully, but when I go to "Start" in sevidor it returns the following error, and not start:
Error! Connection failed to node (local) for database NSP:
-24700,ERR_DBMSRV_NOSTART: Could not start DBM server.
-24832,ERR_SHMNOTAVAILABLE: Shared memory not available
-24827,ERR_SHMALLOCFAILED: ID C:\sapdb\data\wrk\NSP.dbm.shi, requested size 2560
Someone could help me?

Hello Marques Polastri ,
->Please check/stop all database applications and tools, like DBMGUI and dbmcli ... Then check/kill all processes left with name dbmsrv.exe, if you will still have them. After that rename C:\sapdb\data\wrk\NSP.dbm.shi and C:\sapdb\data\wrk\NSP.dbm.shm, shared memory files, to C:\sapdb\data\wrk\NSP.dbm.shi.old and C:\sapdb\data\wrk\NSP.dbm.shm.old.
Try to connect to the database NSP & let us know the results.
-> Please update with output of the following commands:
dbmcli db_enum
dbmcli -d NSP -u <control>,<pwd> db_state
Thank you and best regards, Natalia Khlopina

Error Install : SAP NetWeaver 7.01 ABAP Trial Version

Hi Everyone,
I am getting this error while trying to install SAP Netweaver 7.01 ABAP Trial version.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, An error occurred and product installation failed. Look at the log file C:\sapdb\NSP\log.txt for details.
(Sep 27, 2008 3:01:11 PM), Install, com.sap.installshield.maxdb.maxdb_call_sdbinst, err, ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
STACK_TRACE: 22
ProductException: (error code = 601; message="An Error happened during call of MaxDB Tool sdbinst. Check end of Logfile C:/Users/Amir/AppData/Local/Temp/MaxDBSAPNWPREV.log")
*     at com.sap.installshield.maxdb.maxdb_call_sdbinst.install(maxdb_call_sdbinst.java:193)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)*
*     at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)*
*     at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)*
*     at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl.installProduct(Unknown Source)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
*     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)*
*     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)*
*     at java.lang.reflect.Method.invoke(Unknown Source)*
*     at com.installshield.wizard.service.LocalImplementorProxy.invoke(Unknown Source)*
*     at com.installshield.wizard.service.AbstractService.invokeImpl(Unknown Source)*
*     at com.installshield.product.service.product.GenericProductService.installProduct(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl.installAssembly(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl.access$900(Unknown Source)*
*     at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)*
*     at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)*
*     at java.lang.Thread.run(Unknown Source)*
Can somebody give me suggestion how to resolve my probelm.
thanks,
Amir
PS : I have all the requirements system

did u installed loopback adapter as mentioned in the installation instructions?
Yes, yesterday, I tried to install SAP with loopback adapter (Now, I am trying to install without loopback adapter because I have a DHCP server) -> the same error with or without loopback adapter
does your pc have internet connection available?
Yes, I have an internet connection available (I am in Hotel and there is Internet via DHCP server)
is the installation process completed?
Yes the installation process is completed and with success (but without C:\sapdb)
(Yesterday, when I had the first error and the installation process was not completed, I had the C:\sapdb.....strange)
how much time the installation taking.. usually the step of database installation and configuration takes a long time.
Not much time because there is not database installation
while logon to sap, what details are u giving.. the system number .. is it 00,
When I create the Item, I put the system number 00 but when I try to logon I have the error message that I posted in my previous message
which other SAP softwares are installed on ur pc.
In each time, when I tried to install SAP, I uninstalled all SAP software
I hope you can help me for the install
Note : I work on Vista sp1
Thank you for your help
Amir

Installing SAP NetWeaver 7.0 ABAP Trial Version on x64 bit machine

Hi,
I am trying to install SAP NetWeaver 7.0 ABAP Trial Version onto my server which is running Windows Server 2003 Standard x64 (Processor is AMD Dual-Core Opteron 1210 / 1.8 GHz) however the installation fails at 17%.
Upon reviewing the the logfile MaxDBSAPNWPREV.log its evident that the issue is due to the os being the 64 bit version. Some of the log file is as follows:
Mon Mar 31 14:04:24 BST 2008 MaxDB sdbinst: software in package SAP Utilities is not runnable on your system
Mon Mar 31 14:04:24 BST 2008 MaxDB sdbinst: FILE MAGIC: MS Windows 32-bit i386 executable
Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: architecture = AMD64
Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: subversion = Service Pack 2
Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: system = Windows
Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: YOUR SYSTEM: version = NT 5.2
Mon Mar 31 14:04:25 BST 2008 MaxDB sdbinst: installation exited abnormally at Mo, Mar 31, 2008 at 14:04:23
Does anyone know a way round this? Is there anyway to get the installation successful on my server? The model is HP Proliant Server ML 115.
Thanks for your time and help.
Vish

See other thread /message/2787330#2787330 [original link is broken]
Edited by: Valdir Novo Sevaios Junior on Apr 12, 2008 4:46 AM

SAP NetWeaver 7.02 ABAP Trial Version - No Package JDBC installed

Hello,
I have the following error when installing SAP NetWeaver 7.02 ABAP Trial Version on Windows 2003 Server :
Assertion failed: com.sap.sdb.sllib.api.exceptions.SoftwareException: No Package JDBC installed in installation: Legacy
Can someone help me on what to do?
Thanks
Toan

Hi Viet-Toan Nguyen ,
First thing you can do is uninstalled the previously installed sapdb and choose to install db inside sap installation instead of using existing db instance in one of the installation step, So don't install db seperately , choose it during sap installation.
If you have tried first thing properly and the error still persist then.....
Second thing is :
Compatibilities for Oracle JDBC Drivers :
Starting with 10g Release 1 (10.1), the Oracle JDBC drivers no longer support JDK 1.1.x or earlier versions.
And also check the paths:
ORACLE_HOME/jdbc
ORACLE_HOME /jlib directory.
CLASSPATH
ORACLE_HOME/jdbc/lib/ojdbc14.jar for full globalization support ORACLE_HOME/jdbc/lib/orai18n.jar
ORACLE_HOME/jdbc/lib/classes12.jar
ORACLE_HOME/jdbc/lib/orai18n.jar for full globalization support
But I believe above all these things you should perform uninstallation and installation of SAP system properly on CURRENT DATABASE NOT ON THE PREVIOUSLY INSTALLED DATABASE.
Thank you.

Error installing SAP NetWeaver 7.2 ABAP Trial Version

Hi,
At the beginning of the installation of SAP NetWeaver 7.2 ABAP Trial Version the following error occurred:
Program is starting... Please wait!
ERROR      2010-12-28 18:58:18.804 syxxcniwrapper.cpp:105
NI::CNIInit::CNIInit() lib=syslib module=syslib
FSL-03000 Error initializing network library. SAPRETURN: 0xffffffff
Opened sylib721.dll
exe dir is C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860
MessageLib initialized successfully.
Creating file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
Removed file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
Initialized SAP kernel tracing to file C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel
Creating file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
Removed file C:UsersViníciusAppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel_test_28_Dec_2010_18_58_18.
Initialized SAP kernel tracing to file C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860dev_sap_kernel
Opened C:UsersVINCIU~1AppDataLocalTempsapinst_exe.3164.1293569860/iaguieng721.dll
Error initializing network library. SAPRETURN: 0xffffffff
Exception thrown near line 107 in file syxxcniwrapper.cpp
Stack trace:
iaxxcrunenv.cpp: 65: CController::getServerHostName()
syxxcniwrapper.cpp: 88: NI::CNIInit::CNIInit()
At line 107 file syxxcniwrapper.cpp
Call stack:
iaxxcrunenv.cpp: 65: CController::getServerHostName()
syxxcniwrapper.cpp: 88: NI::CNIInit::CNIInit()
Error initializing network library. SAPRETURN: 0xffffffff
Failed action: with parameters
Error number 4294967295 error type SAP_RETURN
--- Unicode interface pid = 2700 :
gethostnameU16 encountered invalid UTF-8
ed 63 69                                        |.ci             |
Characters previously read:
0056 0069 006e                           |Vin     |
*--- Unicode interface -
End of message -
Exit status of child: 1
what's the solution?
thanks!

to install SAP it is necessary to have your host in a network.
If you are installing on a stand alone machine then you will have to install a loop back adapter if you are installing on windows.
Also make below entry in the host file
127.0.0.1           <host-name>
Now ping 127.0.0.1 and see its giving proper response.

Install SAP NetWeaver 7.01 ABAP Trial Version

Hi
Can we install this ABAP trail version on Vista home premium edition or do we need enterprise.
Thanks in advance
Harischandra

Hai,
VISTA Enterprise will be better than Premium, i have seen some Installations on Premium having problems.
For SAP NetWeaver 7.01 ABAP Trial Version System Requirements:
Operating System: Windows XP Professional (Service Pack 2) or Windows Server 2003 and Windows VISTA.
Its better you can go with Windows server 2003 if applicable.
Regards,
Yoganand.V

Probleme to run server after SAP NetWeaver 7.01 ABAP Trial Version install

Hi all,
I have a probleme to start WAS and MAxDB after SAP NetWeaver 7.01 ABAP Trial Version.
I installed the all and then connect to SAP System without restarting Windows. There was no probleme there all was perfect and I can connect to SAP.
Next, I restart Windows,open SAPManagementConsole, the use the "Start" function on "NSP" icon and system telle me that I haven't the right credentials ... unbelivaible because it told me to use my OS user account and password I used the same user/password than the previous one, when it worked.
So I tried everything that come to my mind but I didn't found the solution.
I also tried to use sapstartsrv.exe under C:\SAP\NSP\SYS\exe\run folder the only thing is that the Windows service "SAPNSP_00" command line was changed but I don't thing that it is with the good parameters.
So, I really don't know how to start this system and I would be pleased if you can help me !
Tanks a lot
Regards
morgan

Hello,
Normally there should be a possibility to start this via
Start -> All programs -> SAP NetWeaver 7.01 ABAP Trial Version -> Start application server
or via C:\MiniSAP\NSP\SYS\exe\run\startSystem.cmd
Regards,
Michel

I can't install the SAP NetWeaver 7.0 ABAP Trial Version! HELP!

can anyone help me ,when i install the SAP NetWeaver 7.0 ABAP Trial Version,it always clue on "The installer had to update some MicroSoft runtime libraries. For correct operation, a system reboot is required. Do you want to reboot now?" I have reboot more and more ,but it just the same.

1. create an shortcut of the CD\image\setup.exe to your desktop
2. change the properties of the shurtcut - compatibility - run program in "windows server 2003 sp1" mode and select "run as administrator"
3. now you can doubleclick the shortcut and install the trial

How to install SAP NetWeaver 7.01 ABAP Trial Version software

Hi,
I have SAP NetWeaver 7.01 ABAP Trial Version software.
Can anyone help how to install this software.
and I also need the path to install SAP NetWeaver 7.01 ABAP Trial Version software.
Thanks & Regards,
Chandu.

Hii,
To install SAP NetWeaver 7.01 ABAP Trial Version jst go thru the following links.
https://www.sdn.sap.com/irj/sdn/nw-ui?rid=/library/uuid/eea83e34-0801-0010-46a2-e830cb0d496f
www.sapdb.info/install-sap-netweaver-abap-edition-on-local-pc/

How to download SAP NetWeaver 7.01 - ABAP Trial Version?

Hi Experts,
Can anyone of you tell me how to download SAP NetWeaver 7.01 - ABAP Trial Version using SAP DOWNLOAD MANAGER?
Thanks in advance,
With kind regards,
Kannan

Hi Kanann,
I downloaded it from here [http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2|http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/80fd9a0a-e306-2a10-c896-b84c77c13ed2]
Let me know if this information its ok for you.
regards.
Daniel

Download and install ADS on CE1 by SAP NetWeaver 7.01 ABAP Trial Version

Similar Messages

Maybe you are looking for